User Manual 859 FC Product Name: Half-Mini Card size TransferJet module Model number: TJ101 GENERAL The TJ101 is a Close Proximity Wireless TransferJet*1 module, implemented in a PCI Express*2 Half-Mini Card format. The TJ101 interfaces to a host PC by directly inserting the card into a PCI Express*2 Mini slot. Wireless connectivity requires an external TransferJet*1 coupler connected by an RF coax cable to the TJ101 module.
*1 TransferJet is a trademark of Sony Corporation.
*2 PCI Express is a trademark of the PCI Special Interest Group (PCI-SIG). Integration to the end product The SMK Transceiver Module, model TJ101 has to be installed and used in accordance with the technical description/installation instructions provided by the manufacturer. The system may only be implemented in the configuration that was authorized. Note that any changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority to operate this equipment. 5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan User Manual 859 FC Regulatory Information Manual Information The following text shall be placed on the manual of end product. Common in USA-Federal Communications Commission (FCC) and Industrial Canada (IC RSS-Gen and RSS-102) USA-Federal Communications Commission (FCC) Only 5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan User Manual 859 FC Industrial Canada (IC RSS-Gen and ICES-003) Only RSS-Gen None ICES003 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. it is the responsibility of the manufacturer or importer to determine whether the notice should appear in one or the other, or both, of the official languages, based upon the intended market, company marketing policies, and any other applicable provincial or federal regulations. Labelling SMK Transceiver module TJ101 labelled as below. FCC ID:GT3FC012 IC:3683A-FC012 The proposed FCC ID and IC label format is to be placed on the module. If FCC ID and IC is not visible when the module is installed into the system, The following sentences shall be placed on the outside of final host system. Contains Transmitter Module FCC ID: GT3FC012, IC: 3683A-FC012 or Contains FCC ID: GT3FC012, IC: 3683A-FC012 5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan