Users Manual RemotePoint Onyx Page
Thank You Thank you for purchasing a RemotePoint Onyx Presentation Remote. We know you had other choices and we appreciate that you chose Interlink Electronics for your wireless needs. So that we may better serve you in the future, please register online at www.interlinkelec. com/register. Sincerely, E. Michael Thoben President, Chairman and CEO Interlink Electronics, Inc. WarranTY 30-Day Money Back Guarantee One Year, Limited Warranty Page
FCC Certification This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, can radiate radio frequency energy and if not installed and used in accordance with the instruction guide, may cause harmful interference to radio communications. However, there is no guarantee that this radio interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Consult the dealer or an experienced Radio-TV technician for help. Page
Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Extension cables are not recommended, if used, they must be shielded in order to comply with the emission limits. IC Certification The term IC before the certification/registration number only signifies that the Industry Canada technical specifications were met. Declaration of conformity Manufacturer:
Interlink Electronics, Inc. 546 Flynn Road Camarillo, CA 93012 We declare under our sole responsibility that the VP4700 conforms to the following directives and norms:
Directive 89/336/EEC, Amended by 93/68/
EEC EMI: EN 55022 (1992) Class B EMC: EN 50082-1 (1992) Directive 73/23/EEC, Amended by 93/68/
EEC Safety: EN 60950: 2000 Page
Connecting the USB Receiver Remove the USB receiver from the remote. Insert the USB receiver into any available USB port on the computer. Computer You can use a USB extension cable for computers with difficult to reach USB ports or to reposition the receiver. Page
Installing the Batteries Step 1: Open Remote Turn the remote upside down and push on the eject slider to release the outer cover. Step 2: Remove Cover Separate the outer cover from the remote by gently pulling on the top and bottom in opposite directions. Once separated, turn the remote over. Step 3: Add Batteries Open the battery compartment by pressing down on the latch. Insert the batteries per the diagram on the remote. Page
Step 4: Set the Clock Set the clock by pressing the clock set button. The hour will start blinking. Use the following keys to set the time. Increase value Decrease value Move to next digit Done For PC users, there is a Clock Setting Utility available at http://www.interlinkelectronics. com/support/downloads.html Step 5: Reassemble Reassemble your remote by closing the battery door and sliding the outer cover over the remote until it clicks into place. Page
Presenting Next Slide: Advance to the next slide. Previous Slide: Return to the previous slide. Start Presentation: Press this to start your presentation. Starts from your current posi-
tion. Blank Screen: Use the blank screen button to hide your presentation while you make a key point. Press again to reveal the presen-
tation. Using the Laser Pointer Press the button on the front of the remote to activate the laser pointer. The laser pointer can be used to highlight important points on slides and graphs. Page
Using with a Macintosh The remote control has three different compatibility modes. Mode 1:
Windows computers running Microsoft PowerPoint. Mode 2:
Macintosh computers running Keynote. Mode 3:
Macintosh computers running Microsoft PowerPoint. The light on the USB receiver will blink one to three times every second or so to tell you which mode your receiver is currently set to. To switch modes you will need a pointy object, such as a paper clip. While the receiver p l u g g e d i n t o USB port, press down on the recessed button is a Page
on the receiver. Each time you press the button, it will move to the next mode. Once set, the mode is remembered for next time. Troubleshooting Problem: When you plug the receiver into the remote the light on the next slide button blinks repeatedly for several minutes. Solution: The remote and the receiver are unable to pair. Unplug the receiver and try again. If this continues please contact support. Problem: When removing the receiver from the remote, the indicator LED flashes red repeatly. Solution: The batteries in the remote have reached a low voltage level and need to be replaced. The unit may continue to operate but for a limited time. Page 0 For Product Support Please Contact 546 Flynn Road Camarillo, CA 93012 USA TEL 888 696 3500 FAX 805 484 5997 INTERLINKELECTRONICS.COM P/N 94-01441 Rev. P1 Page