FCC ID: 2AFWNCD14XTR01WHKSM ALL IN ONE DUAL WIRELESS CHARGER

LED Indicator Connector

(USB Type C) Copyright 2021 Solu M Please read the manual to understand how to use the charger safely. Connect the charger to the adaptor (), put mobile device or smart watch on the charging pad(). Make sure there is no magnet/magnetic card/metal product left in between the device and the charger. It may not charge the device properly or cause heat damage. If the device supports high-speed charging, it will charge faster. Please put the devices in the middle of the charging pad for speedy and safe charge. For high-speed charge, 15W or above PD supported, or AFC, QC2.0/3.0 adopter must be used. The charger is only compatible to USB Type-C. Please check your USB connector type. Mobile device can be charged with case cover, but it may not charge properly if the case is too thick. Product A/S and Safety Precautions Please state conditions of the product and your contact information when submitting A/S request. Please contact the supplier or contact SoluM CS center at 1588-0502 if defects occur. All in one Wireless Chargers warranty period is 6 months after purchase. If charger malfunctions due to defective charger, SoluM will recover/inspect the charger and send you the new product. If recovered product defect occurred due to the customer, shipping fee will be charged to the sender. Precautions for Use

- Do not store in a hot place.

- Keep out of reach of children or pets.

- Do not shock the product such as dropping.

- Do not arbitrarily modify or fix the product.

- No free warranty if product damage occurred due to above reasons. Product Specification Product Name Model Name Manufacturer/Importer Country of Manufacture Release Date Warranty Period All in one dual Wireless Charger CD14XTR01WHKSM Solu-M China Separately Marked 6 months Input Power Output Power Color 9.0V;1.67A 10W MAX White Specification Weight Product Size (width x length x height) 75mm x 120mm x 12mm 50g User Manual Component List Product Quick User Manual

Components and separate parts may change. Connector (USB Type C) can generate heat while charging. Do not touch the connector Free Warranty Service Free warranty guaranteed as below. Paid Service Fees will be charged regardless of warranty if the products

Non-faulty or customer faults does not apply. are non-faulty or damaged due to customers fault. Damage Cases Warranty Damage Cases Warranty Under Warranty After Warranty Under Warranty After Warranty Damaged during delivery Within 7 days after purchase Exchange or Refund at the store Not Applicable Damaged due to customers faults Partial Repairs are not possible

/ Customer may purchase a new product Not Applicable Malfunction occurs under warranty

(6 months) Within 7 days after purchase Not Applicable After supplier retrieve and inspect the product, it will be either exchanged or refunded 7 days after purchase After supplier retrieve and inspect the product, it will be exchanged Not Applicable 1. Damaged due to customers faults Mishandling of products When precautions are not followed 2. Other reasons Damaged due to natural disasters Both mishandling and warranted defects are found

Service can be denied due to below reasons, Arbitrarily modify, copy or use imitated parts If the parts have been changed from the time of the purchase FCC Warning SThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable SSprotection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and

receiver.

for help.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

C5266091_X10_Ed.1 SOLUM CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AFWNCD14XTR01WHKSM Date: 11/30/2021 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No No Short-Term Confidentiality No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ki Dong Lee Title: Senior Manager Date: 11/30/2021 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: SOLUM CO., LTD. Address: 4,5,6th F, 357, Guseong-ro, Giheung-gu, Gyeonggi-do, Yongin-si, South Korea. Product Name: ALL IN ONE DUAL WIRELESS CHARGER Model Number: CD14XTR01WHKSM FCC Identifier: 2AFWNCD14XTR01WHKSM We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Ki Dong Lee Date: 11/30/2021 Title: Senior Manager Signature of applicant:

1/1