NEWTON S-Label Datasheet NEWTON S-Label (Electronic Shelf Label System) REV1.0
(PMN :NEWTON S-Label )
(FVIN : VISION_ 1.1) 2020-11-05 Summary This datasheet presents the general performance and specifications of NEWTON S-Label for ESL
(Electronic Shelf Label) System. SOLUM. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of SOLUM This document is subject to change without notice. REV 1.0 SOLUM Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................... 4 FEATURES .......................................................................................................................... 5 TYPICAL APPLICATIONS ......................................................................................................... 5 APPEARANCE ....................................................................................................................... 5 2 SPECIFICATION ................................................................................................................... 6 PRODUCT SPECIFICATION ...................................................................................................... 6 RADIO (RF) SPECIFICATION .................................................................................................... 6 NFC SPECIFICATION ............................................................................................................. 7 MECHANICAL DRAWING ......................................................................................................... 8 LABEL MARKING ................................................................................................................. 10 3 PACKAGING ...................................................................................................................... 12 4 CAUTIONS FOR TREATMENT ............................................................................................. 13 USAGE ENVIRONMENT ......................................................................................................... 13 STORAGE AND USE ............................................................................................................. 13 BATTERY REPLACEMENT ...................................................................................................... 14 FCC ................................................................................................................................ 16 1.1 1.2 1.3 2.1 2.2 2.3 2.4 2.5 4.1 4.2 4.3 4.4 REV 1.0 SOLUM Document History Rev. Date Revision History Page 1.0 05 NOV 2020 Initial release
REV 1.0 SOLUM 1 General Description NEWTON S-Label product is part of SoluM S-Label (Electronic Shelf Label) System, also consisting of NEWTON S-Label Gateway (S-Gate), and Remote Controller (S-RC). The S-Label System electronically displays price, product, and promotion information on S-Labels, which has been traditionally printed or written on paper in places such as retail markets. NEWTON S-Label wirelessly receives data from S-Gate and updates the display with the new information provided. NEWTON S-Label is based BLE for low power wireless communication applications. It consists of RF transceiver, RF circuitry and ARM Cortex M3 MCU offering BLE based network protocol, and MAC protocol and other peripheral devices. Figure 1. ESL System REV 1.0 SOLUM 1.1 Features
- Display: E-Paper Display (EPD) Active Type
(2.9, 4.2)
- Display Color: BWR (Black, White, Red)
- Communication: Wireless communication based on BLE
- Operating on Sub-clauses in IEEE 802.15.4g
Low Power Consumption
- Working Condition: Indoor where wireless communication is available.
- RoHS compliant
- NFC (13.56MHz): Felica NFC Forum Type 3
- Retail industry with electronic displays, platforms, solutions and services.
Intelligently communicating, managing, and optimizing price and product informations. 1.2 Typical Applications 1.3 Appearance Figure 2. NEWTON S-Label REV 1.0 SOLUM 2 Specification 2.1 Product Specification Description 2.9 Inch: 86.0 * 41.3 * 13.1 4.2 Inch: 98.1 * 83.8 * 14.5 CR2450 Lithium Battery (3V, 2 PCS) 2.4 ~ 3.3Vdc (condition: In active status)
- CR2450 2 pcs: 2.9, 4.2
** Note: Battery capacity depends on temperature (especially in low temp environment) and number of update count. BWR(Black, White, Red) 2.9 Inch: 384 x 168 Pixel (144dpi) / 67.6 x 29.6 mm 4.2 Inch: 400 x 300 Pixel (119dpi) / 84.8 x 63.6 mm Housing Color Front : White / Rear : Gray Information display Price, Unit, Symbol etc. Communication Sub-clauses in IEEE 802.15.4g Communication Distance Radius 40m Operation Temperature Normal Temperature TAG 0 ~ 40 (@35~60% RH) Storage Temp.
-20 ~ 40 2.2 Radio (RF) Specification Item Parameter Unit Condition SPEC Min Typ Max Transmit Power 5 10 15 dBm
[Carrier Frequency Offset and Drift]
-75 0 75 kHz SOLUM Item Size Battery Display TX REV 1.0 Tx Current
16 mA Total current at max Tx Power RX Receiver Sensitivity
-80
-90 dBm PER < 5%
Test Channel :CH 0 (863.225MHz) ,CH 11(867.625MHz) 2.3 NFC Specification Item Parameter Unit Condition SPEC Min Typ Max NFC Read Distance
20
mm TAG status REV 1.0 SOLUM 2.4 Mechanical Drawing 2.4.1 Case Dimension 2.9 Model Figure 3. 2.9 Mechanical Dimension REV 1.0 SOLUM 4.2 Model Figure 4. 4.2 Mechanical Dimension REV 1.0 SOLUM 2.5 Label Marking 2.5.1 Product Info and MAC Display in S-Label
- 2.9 inch
- 4.2inch Figure 5. Product and MAC Labels Product information is indicated on the sticker label of the S-Labels. The information is consisted of MODEL (model name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), CE certification mark, FCC ID and Manufacturer (SoluM). 1) Model Name: EL- 0D3WRA (i.e. EL029D3WRA)
- EL: TAG
- 0 : Tag Display size REV 1.0 SOLUM 029=2.9 042=4.2 2) MFD: (Month).(Date).(Year) i.e. JAN.26.2020 3) S/N: Serial Number Information (See Section 2.5.1) REV 1.0 SOLUM 3 Packaging
- 2.9 inch
- 4.2inch REV 1.0 Figure 6. Package SOLUM 4 Cautions for Treatment Provisions should be made to protect against any damage to the product caused by improper handling. The purchaser assumes any responsibility for damage to the product caused by improper It is highly recommended that the product should be installed within 3 months from the date of arrival in the logistics hub. Recommended storage condition is -20~40 Celsius degree, 35-60% RH handling. environment. 4.1 Usage Environment Take extra cautions when using this RF device in the vicinity of other electronic devices and appliances. Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this RF device can affect other electronic devices and appliances. If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals. 4.2 Storage and Use device itself. surface and damaged. Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the Do not place or store the product on a sloped surface. The product may slide and fall off the Use the product in temperatures ranging from 0 to +30. Parts and circuits may be damaged if operating or stored in extreme temperature. The display panel needs extra care when handling.
- Do not apply any impacts on the e-Paper display as it is fragile.
- Continuous exposure to excessive moisture (over 60% RH) or UV shortens display lifetime.
- Ghosting image may appear in temperature conditions of less than 15 Celsius degree. Avoid areas with strong magnetism or subject to magnetism. Contact between the device and a magnetic object can lead to malfunctions. Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in the vicinity of highly pressurized containers. External impact to the product, such as from being dropped, can damage the product. Twisting and bending the product can damage the exterior casing and the internal components. If this product operates abnormally while removing battery or replacing battery, the product SOLUM REV 1.0 should be discharged by contacting the battery terminals (+) and (-) in the product. This product uses 900MHz frequency band for wireless communication network. Radio communications can be limited or affected by other applications that share the same frequency Frequent communications, updates and screen renewals may reduce battery life time. Low temperature environments may reduce battery life. band. Audience 4.3 Battery Replacement
- Authorized persons with the following knowledge are allowed to replace the battery:
Battery / Electronic assemblies like circuit board / Compliance of the instruction Note: Warranty is voided if battery is replacement by unauthorized personnel.
(When replacing batteries, please contact authorized person) Instructions
- Risk of short circuit if battery is incorrectly installed/stored.
- Check that your hands are dry before and at all times during the replacement process.
- Keep batteries away from children and infants.
- Do not heat, charge, bend, drop, short-circuit and/or disassemble battery.
- Do not mix used and new battery together or different battery types. Note: Battery rarely has minor stain or leak. Steps Open the battery cover. Take out the batteries. Put in the new batteries. Check the batteries direction. Put the battery cover back. REV 1.0 SOLUM Battery Directional Top: (+) Positive Bottom: (-) Negative Figure 7. Battery Directional REV 1.0 SOLUM 4.4 FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. REV 1.0 SOLUM 5 4.5 IC Information to User This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
fonctionnement.
(1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le REV 1.0 SOLUM