NEWTON S-Label Datasheet NEWTON S-Label (Electronic Shelf Label System) REV1.1
(PMN: NEWTON S-Label )
(FVIN: 1.0) 2020-03-12 Summary This datasheet presents the general performance and specifications of NEWTON S-LabelforESL
(Electronic Shelf Label) System. SOLUM. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of SOLUM This document is subject to change without notice. REV 1.1 SOLUM Proprietary Table of Contents 1 GENERAL DESCRIPTION ................................................................................................ .... 4 FEATURES ................................................................................................ ......................... 5 TYPICAL APPLICATIONS ................................................................................................ ........ 5 APPEARANCE................................................................................................ ...................... 5 2 SPECIFICATION ................................................................................................ .................. 6 PRODUCT SPECIFICATION ................................................................................................ RADIO (RF) SPECIFICATION................................................................................................ NFC SPECIFICATION ................................................................................................ MECHANICAL DRAWING ................................................................................................ LABEL MARKING
................................................................................................................. 10
...... 6
.... 6
............. 7
......... 8 3 PACKAGING
...................................................................................................................... 12 4 CAUTIONS FOR TREATMENT
............................................................................................. 13 USAGE ENVIRONMENT
......................................................................................................... 13 STORAGE AND USE
............................................................................................................. 13 BATTERY REPLACEMENT
...................................................................................................... 14 FCC
................................................................................................................................ 16 1.1 1.2 1.3 2.1 2.2 2.3 2.4 2.5 4.1 4.2 4.3 4.4 REV 1.1 SOLUM Proprietary Document History Rev. Date Revision History Page 1.0 15JUL2020 Initial release
REV 1.1 SOLUM Proprietary 1 General Description NEWTON S-Labelproduct is part of SoluM S-Label (Electronic Shelf Label) System, also consisting of NEWTON S-LabelGateway (S-Gate), and Remote Controller (S-RC).The S-Label System electronically displays price, product, and promotion information on S-Labels, which has been traditionally printed or written on paper in places such as retail markets. NEWTON S-Labelwirelessly receives data from S-Gate and updatesthe display with the new information provided. NEWTON S-Labelis based BLE for low power wireless communication applications. It consists of RF transceiver, RF circuitry and ARM Cortex M3 MCU offering BLE based network protocol, and MAC protocol and other peripheral devices. Figure 1.ESL System REV 1.1 SOLUM Proprietary 1.1 Features
- Display: E-Paper Display (EPD)Active Type
(2.9, 4.3)
- Display Color: BW(Black, White) / BWR(Black, White, Red) / BWY(Black, White, Yellow)
- Communication: Wireless communication based on BLE
- Operating on 2.4GHz Unlicensed ISM band for BLE
Low Power Consumption
- Working Condition: Indoor where wireless communication is available.
- RoHS compliant
- NFC (13.56MHz): Felica NFC Forum Type 3
- Retail industry with electronic displays, platforms, solutions and services.
Intelligently communicating, managing, and optimizing price and product informations. 1.2 Typical Applications 1.3 Appearance Figure 2.NEWTON S-Label REV 1.1 SOLUM Proprietary 2 Specification 2.1 Product Specification Item Size Battery Display Description 2.9 Inch:86.0 * 41.3 * 13.1 4.3 Inch: 123.9 * 42.3 * 13.7 CR2450 Lithium Battery (3V, 1~4PCS) 2.4 ~ 3.3Vdc(condition: In active status)
- CR2450 3pcs: 2.9
- CR2450 4pcs: 4.3
** Note: Battery capacity depends on temperature(especially in low temp environment) and number of update count. BW(Black, White) / BWR(Black, White, Red) / BWY(Black, White, Yellow) 2.9 Inch: 384 x 168 Pixel (144dpi) / 67.6 x 29.6 mm 4.3 Inch: 522 x 152 Pixel (125dpi) / 105.4 x 30.7mm Housing Color White (Optional: Black) Information display Price, Unit, Symbol etc. Communication Wireless communication based on 2.4GHz Unlicensed ISM band for BLE Communication Distance Radius30m Operation Temperature Normal Temperature TAG
(@35~60% RH) 0 ~ 40 FREEZER Temperature TAG
:-25 ~ 0
(Freezer tag) Storage Temp.
-20
~ 40 2.2 Radio(RF) Specification Item Parameter Unit Condition SPEC Min Typ Max Transmit Power
-3 4 dBm
[Carrier Frequency Offset and Drift]
-75 75 kHz 0 0 SOLUM Proprietary TX REV 1.1 Tx Current 9 13 mA Total current at max Tx Power RX Receiver Sensitivity
-80
dBm PER < 5%
2.3 NFC Specification Item Parameter Unit Condition SPEC Min Typ Max NFC Read Distance
20
mm TAG status REV 1.1 SOLUM Proprietary 2.4 Mechanical Drawing 2.4.1 Case Dimension 2.9 Model REV 1.1 SOLUM Proprietary Figure 3. 2.9 Mechanical Dimension 4.3 Model Figure 4. 4.3 Mechanical Dimension REV 1.1 SOLUM Proprietary 2.5 Label Marking 2.5.1 Product Info and MAC Display in S-Label
- 2.9 inch
- 4.3inch Figure 5.Product and MAC Labels Product information is indicated on the sticker label of the S-Labels.The information is consisted of MODEL (model name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), CE certification mark, FCC ID and Manufacturer (SoluM). 1) Model Name: EL-0 H3 T (i.e.EL029H3WRT)
- EL: TAG
- 0
: Tag Display size 029=2.9 043=4.3
: Tag Case Color W - WHITE REV 1.1 SOLUM Proprietary B BLACK
Tag Display-Color M - Mono Tag (BW) R - Red Color Tag (BWR) Y - Yellow Color (BWY)
. Red Color Label
(BWR) Yellow Color Label
(BWY) Black/White Color
(BW) WHITE BLACK WHITE BLACK WHITE BLACK 2.9" EL029H3WRT EL029H3BRT EL029H3WYT EL029H3BYT EL029H3WMT EL029H3BMT 4.3" EL043H3WRT EL043H3BRT EL043H3WYT EL043H3BYT EL043H3WMT EL043H3BMT 2) MFD: (Month).(Date).(Year) i.e.JAN.26.2020 3) S/N: Serial Number Information (See Section 2.5.1) REV 1.1 SOLUM Proprietary 3 Packaging
- 2.9 inch
- 4.3inch REV 1.1 Figure 6.Package SOLUM Proprietary 4 Cautions for Treatment Provisions should be made to protect against any damage to the product caused by improper handling. The purchaser assumes any responsibility for damage to the product caused by improper It is highly recommended that the product should be installed within 3 months from the date of arrival in the logistics hub. Recommended storage condition is -20~40 Celsius degree, 35-60% RH handling. environment. 4.1 Usage Environment Take extra cautions when using this RF device in the vicinity of other electronic devices and appliances. Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this RF device can affect other electronic devices and appliances. If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals. 4.2 Storage and Use device itself. surface and damaged. Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the Do not place or store the product on a sloped surface. The product may slide and fall off the Use the product in temperatures ranging from 0 to +30
. Parts and circuits may be damaged if operating or stored in extreme temperature. The display panel needs extra care when handling.
- Do not apply any impacts on the e-Paper display as it is fragile.
- Continuous exposure to excessive moisture (over 60% RH) or UV shortens display lifetime.
- Ghosting image may appear in temperature conditions of less than 15 Celsius degree. Avoid areas with strong magnetism or subject to magnetism. Contact between the device and a magnetic object can lead to malfunctions. Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in the vicinity of highly pressurized containers. External impact to the product, such as from being dropped, can damage the product. Twisting and bending the product can damage the exterior casing and the internal components. If this product operates abnormally while removing battery or replacing battery, the product SOLUM Proprietary REV 1.1 should be discharged by contacting the battery terminals (+) and (-) in the product. This product uses 2.4GHz frequency band for wireless communication network. Radio communications can be limited or affected by other applications that share the same frequency band, such as WiFi, Bluetooth, Zigbee, etc. Frequent communications, updates and screen renewals may reduce battery life time. Low temperature environments may reduce battery life. 4.3 Battery Replacement Audience
- Authorized persons with the following knowledge are allowed to replace the battery:
Battery / Electronic assemblies like circuit board / Compliance of the instruction Note: Warranty is voided if battery is replacement by unauthorized personnel.
(When replacing batteries, please contact authorized person) Instructions
- Risk of short circuit if battery is incorrectly installed/stored.
- Check that your hands are dry before and at all times during the replacement process.
- Keep batteries away from children and infants.
- Do not heat, charge, bend, drop, short-circuit and/or disassemble battery.
- Do not mix used and new battery together or different battery types. Note: Battery rarely has minor stain or leak. Steps Open the battery cover. Take out the batteries. Put in the new batteries. Check the batteries direction. Put the battery cover back. REV 1.1 SOLUM Proprietary Battery Directional Top: (+) Positive Bottom: (-) Negative Figure 7. Battery Directional REV 1.1 SOLUM Proprietary 4.4 FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. REV 1.1 SOLUM Proprietary 5 4.5 IC Information to User This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device Le prsentappareilestconforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitationestautorise aux deux conditions suivantes :
fonctionnement.
(1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareildoit accepter tout brouillageradiolectriquesubi, meme si le brouillageest susceptible dencompromettre le REV 1.1 SOLUM Proprietary