Solu-M USB Gateway User Manual
(SLG-DM101) PMN : USB Gateway FVIN : 6.0.24.4 Document Summary Author: D&C Development 1Group, D&C Division Distributor: Solum Co., Ltd. 1 Tel.: 031-8006-7650 www.solu-m.com Editor Information
- Tel.: +82-31-8006-7650
- Address : A-6th floor, 357, Guseong-ro, Giheung-gu, Yongin-si, Gyeonggi-do Copyright Notification Solum Co., Ltd. Copyright @2018 Solum Co., Ltd. All trademarks used are properties of their respective owners. The content of this document is subject to change without prior notice. The content of this document is intellectual property of Solum Co., Ltd. This document may not be reproduced or published without prior consent from Solum Co., Ltd. No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. 2018 Solum Co., Ltd. All rights reserved. 2 Revision History Rev. 1.0 Date 10.29.2018 Remark First Edition. 3 Contents 1. Precautions .............................................................................................................................. 5 2. Overview ................................................................................................................................... 6 3. Product Specifications ...................................................................................................... 7 3.1 General Specifications ..................................................................... 7 3.1.1 USB Gateway 3.2 RF Specifications .............................................................................. 8 3.2.1 USB Gateway 4. Product Description ........................................................................................................... 9 4.1 Exteior ............................................................................................... 9 4.1.1 USB Gateway 5. Operating Procedure ....................................................................................................... 10 4 1. Precautions This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device, therefore, may not be used for applications where safety of human lives is concerned. 1) Usage Environment Take extra caution when using this RF device in the vicinity of other electronic devices and appliances. Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this RF device can affect other electronic devices and appliances. If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals. 2) Storage and Use Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the device itself. Do not place or store the product on a sloped surface. The product may slide and fall off the surface and damage. Use the product in temperatures ranging from 0 to +40. Parts and circuits may damage if used or stored under temperature extremes. Avoid areas with strong magnetism or subject to magnetism. Contact between the device and a magnetic object can lead to malfunctions. Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in the vicinity of highly pressurized containers. External impact to the product, such as from being dropped, can damage the screen. Twisting and bending the product can damage the exterior casing and the internal components. 5 2. Overview USB Gateway make up a system the electronically displays price and other product information that are traditionally shown printed or written on paper in places like the supermarket. Here, ESL(Electronic Shelf Label) USB Gateway receives product price updates from the server and uploads the new data to the applicable electronic shelf label tags (ESL-Tag), changing the displayed price information.
<Diagram 1> ESL System 6 3. Product Specifications 3.1 General Specifications 3.1.1. USB Gateway General Communication USB2.0 Zigbee RF(based on IEEE 802.15.4) Dimension (W*H*D) 30 * 200 * 11 (mm) Weight (g) Enclosure Power 50g Plastic (ABS) USB Power (5V,0.5A) 7 3. 2 RF Specifications 3.2.1 Gateway Category Specification Antenna Type Dipole Antenna (external type) Transmit Frequency 2405MHz ~ 2480MHz Receive Frequency 2405MHz ~ 2480MHz 2 dBi O-QPSK 16ch 0 to +40 USB Power (5V, 2A 500mA) Antenna gain Modulation Channels Operating Temperature Power Note 2ea 8 4. Product Description 4-1 Exterior 4.1.1 USB Gateway Status LED 9 5. Op perati ing P Proced dure Operat tion Che eck
#
1 2 3 4 3-color LED D Status of GREEN RED f USB Gatew way BLUE Status Comm ents On s)
(200ms Off On Off Off Off Off On Off On Off Off Normal About 200ms,Atbo Itmean nsUSBGWis otingtime d justrebooted Warnin g Warnin g Normal Pressin ngfactoryrese etbuttonand TurningonU Ifpress activat singthebutto ed onmorethan 10secs,facto USBGW orymodewill be Activat tingfactoryre esetandresto
(power redonwhilep pressingbutto e oringfirmware bout2mins on).Ittakesab During booting,Ente eringintoLinu uxKernelMod de 10 0 Off Normal NormalMode(Webserverisworkingproperly) On/Off Normal NormalMode(WebserverandRFModuleareworking properly) GreenBlinking(NormalMode) BlueOnfor10sec (WakeupModeOn)periodicallyevery5 min Off Warning NTPfailed REDOnfor5secperiodicallyevery10sec Warning Warning Checkingfirmwareupdatefor1sec~20sec BlueBlinking200ms Pressingfactoryresetbutton RED:250ms,Green:1sec Warning ActivatingFactoryResetmode(Resettingconfigurationfiles) Warning DownloadingfirmwarefilefromServerandupdatingfirmware Warning WritingRFFirmwaretoRFMODEM Blinking
(200ms) off On Off Blinking
(200ms) Blinking Warning RFTESTmode(Onlyformanufacturingtest) Off Off Blinking
(1sec) Blinking
(1sec) On
(5sec) Blinking
(1sec) Off On 5 6 7 8 9 Blinking
(250ms) 10 On Blinking
(1sec) Blinking
(1sec) 11 On
(Long) 12 Off Off ON 13 On Blinking
(1sec)
.Installation a) Map product information and tag IDs. Each tag has a unique 1) MAC Address that serves as the tags ID. Map 1) MAC Addresses of the tags and 2) barcodes of the products. Using a PDA featuring Win CE 5.0 or higher as the operating system and a barcode scanner, scan the tags 1) MAC Address and then the products barcode to map.
(1) MAC Address
(2) Barcode Product 11
+
+
(3) Indu ustrial PDA A ster produc ng the PDA t and tag m As WLAN f apping info feature, regi ormation. ister mappin ng data with h the 4) Serv ver. b) Regi Usin
(4) Serv ver 12 2 c) Atta ach a back r rail to the sh helf (secure using doub ble-sided tap pe or screws s). ach end and d middle cap ps to the mi iddle rail. d) Atta e) Tak make sure t f) Slid g) Pro gateway WARNING :
equipment m manual. The is made. This device This device Including int ke a tag that to align the has been m tag and the mapped from e rail groove m step a) and es properly. d insert to th he middle r rail from ste ep d). Here, de in the mid ddle rail to t the fixed ba ack rail. oducts infor rmation on ed from the e server reg gularly via Tags such as price wi ill be updat This equipm may cause ha e user could ment may ge armful interfe lose the auth nerate or use erence unles hority to oper e radio frequ ss the modific rate this equ uency energy cations are e ipment if an y. Changes o expressly app unauthorize or modificatio proved in the d change or ons to this e instruction modification n complies wit may not cau erference tha th part 15 of se harmful in at may cause the FCC Rul nterference, e undesired les. Operatio and (2) this operation. on is subject device must to the follow accept any wing two cond interference ditions: (1) received, 13 3 NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution This device complies with FCC radiation exposure limits for an uncontrolled environment. Avoid operating this device at a distance less than 20cm from the user. THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. ISED Information to User This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 14