all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 219.22 KiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 219.22 KiB |
4-111-429-11(1) DCC-NWFMT1 Car FM Stereo Transmitter Operating Instructions Mode demploi Manual de instrucciones 2008 Sony Corporation Printed in China A to a cigarette lighter socket vers un allume-cigare 2 WALKMAN 1 Insert this unit into the cigarette lighter socket securely until the frequency appears in the frequency display window. Insrez correctement lappareil dans lallume-cigare jusqu ce que la frquence saffiche sur la fentre daffichage de la frquence. B
<Example of installation in a car with its FM radio antenna built-in the rear window, or its rod antenna mounted on the rear of the car body>
<Exemple dinstallation dans une voiture dont lantenne radio FM est incorpore dans la vitre arrire, ou dont lantenne-tige est monte sur larrire de la carosserie>
Antenna cable Cble dantenne C
<Example of attaching the antenna cable magnet to a passengers seat rail>
<Exemple de fixation de laimant du cble dantenne sur la glissire du sige passager>
WALKMAN Magnet Aimant Seat rail Glissire du sige Use the above basic examples B & C as general guidelines. Adjust the antenna for the best reception, depending on your car. Utilisez les exemples de base B & C ci-dessus comme guides gnraux. Rglez lantenne pour obtenir la meilleure rception, selon votre voiture. D 2 1 5 4 3 E End of the plug Extrmit de la fiche to tighten pour serrer Cigarette lighter plug Allume-cigare Fuse Fusible to remove pour le retirer For customers who purchased this product in the USA Please register this product on line at http://www.sony.com/productregistration. Proper registration will enable us to send you periodic mailings about new products, services, and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you. English WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The following FCC/IC statement applies only to the version of this model manufactured for sale in the USA and Canada. Other versions may not comply with FCC/IC technical regulations. Note This device complies with Part 15 of the FCC Rules and RSS-Gen of the IC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Features With this unit, you can enjoy listening to audio played on portable audio devices through a car FM radio. Music from supports WM-PORT equipped WALKMAN*1 is transmitted to the cars FM radio via FM radio waves. Stable clear sound Using the flexible transmitting antenna cable, it is possible to transmit a stable FM radio wave in any kind of car. The flexible transmitting antenna cable has a magnet to anchor itself to a metal part inside the car. Digital frequency selection, rather than analog, assures a more stable and clear transmission. Selectable frequency from full-range of FM broadcasting (88.1-107.9 MHz) You will be able to find an open frequency for transmitting, even where many stations are broadcast. 4 direct memory buttons By memorizing often-used frequencies to the 4 memory buttons, you can select a frequency with one press. Supports WM-PORT equipped Walkman Available for recharging the WALKMAN* in a car This unit takes power supply from the cigarette lighter socket, and supplies it to the WALKMAN.
* WALKMAN operation while charging varies depending on the WALKMAN. Note Connects to a 12 V DC car battery (only for negative # grounded cars) only. This unit cannot be connected to a 24 V DC car battery. Compact design The small design of this unit allows it to be used in the cigarette lighter socket. This unit is designed so as its protruding part is in one direction only, and when installed can be rotated in order to avoid any obstructions around the cigarette lighter socket. No dry batteries This unit connects to a 12 V DC car battery (cigarette lighter socket), available in many types of cars and trucks.
*1 WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation. Location and Function of Parts 1 Frequency 4 Memory buttons 5 WM-PORT connector 6 Magnet 7 Antenna cable display window 2 Cigarette lighter plug 3 Frequency +/
button How to Use Be sure to install this unit with the engine of the car running. If this unit is left plugged into the cigarette lighter socket when the engine is not running, power may be consumed from the car battery. Do not connect or operate this unit, a WALKMAN while driving or waiting at a traffic signal. Park in a safe place first. Notes Ensure that this unit is safely installed so as not to interfere with the operation of the accelerator or gears. Never perform connection and operation while your car is in motion. For details about car radio, car radio antenna and the connected WALKMAN, refer to the operating instructions supplied with the WALKMAN. Set the car radio 1 Set your car radio to FM. 2 Select a channel that does not get good FM broadcast reception between 88.1 MHz107.9 MHz. The FM broadcast reception conditions may change as your location changes. If the selected frequency becomes occupied by a broadcast signal, select another open frequency. Note Turn the car radio volume down before setting the car radio. Install the unit 1 Connect the WM-PORT connector to the WM-PORT of your WALKMAN. (See fig. A-1) 2 Insert this cigarette lighter plug into the cigarette lighter socket securely until the frequency appears in the frequency display window (See fig. A-2). 3 Press the frequency +/ button repeatedly to select the same frequency that you set on the car radio. Each press changes the frequency by 0.1 MHz, cycling through 88.1 MHz107.9 MHz. Tips Keep pressing the frequency +/ button to change the frequency rapidly. The next time you turn on this unit, this unit is tuned to the last selected frequency. 4 Start playback on the WALKMAN. Notes Do not activate any bass boost or equalizer function on the WALKMAN. Otherwise, sound may be distorted. While connected to this unit, you cannot adjust the volume on the WALKMAN. Adjust the volume on the car audio unit. 5 Route the antenna cable inside the car for best audio reception from this unit. The method to install the antenna cable will depend on your car type. Find the position that provides the best reception, and then install the cable (See fig. B). Notes Route the antenna cable close to the car antenna. This may help to improve the reception from this unit. For details about the car radio antenna, refer to the car operating instructions. About the antenna cable magnet The antenna cable is supplied with a magnet attached at the end. It is used to anchor the cable to a metal part of the car, such as a passengers seat rail. The magnet at the end of the antenna cable is to anchor the antennas best reception position and prevents it being moved, for example, when passengers get in or out of the car. To use the antenna cable magnet, do the following
(See fig. C). 1 Route the antenna cable where the best reception from this unit is obtained. 2 Attach the magnet at the end of the antenna cable to a metal part of the car, such as a passengers seat rail, to anchor the antenna cable in place. 3 If the reception from this unit becomes worse after attaching the magnet at the end of the antenna cable to a passengers seat rail, etc., in step 2, revert to a previous position (to best reception) in step 1, without using the magnet (without attaching it to a passengers seat rail, etc.). Notes Be careful to line the cable so that it will not interfere with driving, become entangled with passenger movements, or be damaged by seat adjustments, etc. If the magnet is attached near movable objects, such as doors or seat rails, make sure that the antenna cable does not become entangled. This may cause the wire to break. Do not leave floppy disks or personal credit cards with magnetic coding near the antenna cable magnet. If the reception from this unit declines If the reception from this unit declines, even though it was good at the frequency set in the beginning, solve the problem referring to the following remedies, according to your circumstances. After setup, reception from this unit declines while driving. c FM broadcast reception may be poor in certain locations, such as underground parking, behind tall buildings, etc. If the car radio and this unit were set up in such a location; due to poor FM broadcast reception, the frequency you set for this unit may be already occupied. If so, the occupying FM broadcast station is received when its reception conditions improve (as you drive) resulting in interference with this units same set frequency. In this case, reset the car radio and this unit to another open frequency in a location where the FM broadcast reception is better. Reception from this unit is disrupted when you move to a new location. c FM broadcast reception conditions vary from one location to another. After setting an open frequency in one location, as you move to other areas, that frequency may become occupied by a broadcast stations signal. In this case, reset the frequency on both the car radio and this unit to another open frequency. Interference or noise occurs. c Other FM broadcasts or non-licensed broadcastings in a city area may interfere with the reception of the frequency set for this unit. In this case, set the car radio and this unit to a less-influenced frequency. To memorize the selected frequency The frequency for the memory buttons is set to 88.1 MHz at the factory setting. Select the frequency in step 3 of Install the unit, then hold down one of the memory buttons until the memory button number appears in the frequency display window. Once you memorize the desired frequency, you can select it by simply pressing the memory button. Note If a frequency is already memorized on the button, that frequency will be replaced with the new one. Charge your WALKMAN WALKMAN operation while charging varies depending on the WALKMAN. 1 Set the WALKMAN to recharge. It may not be necessary to set the WALKMAN to recharge. (See WALKMANs Operation Guide.) 2 When charging is finished, disconnect the WALKMAN from this unit. Notes Plug securely into the cigarette lighter socket. This unit may not fit, depending on the location or shape of the cigarette lighter socket. Be careful to route all the cables properly so that:
they will not interfere with your driving. they will be out of the reach of children. Install this unit in a manner that will not hinder the airbag function in an emergency. Do not use the device in a place subject to liquid or moisture to avoid fire or electric shock. Do not place this unit or the WALKMAN in a location where it is subject to extreme high temperature. It mat result in damage. While not using this unit To avoid unnecessary car battery consumption, unplug this unit from the cigarette lighter socket when not in use. When you turn the car engine off Unplug this unit from the cigarette lighter socket whenever the engine of the car is not running. Depending on the car type, even if the engine is off, the power supply may not turn off automatically. In this case, this may cause unnecessary car battery consumption. Fastening the unit You can fasten the unit to your car interior using the supplied Hook and Loop Fasteners. 1 Peel the back of the one of the Hook and Loop Fastener 2 Stick the Hook and Loop Fastener to the unit
(See fig. D-1).
(See fig. D-2). 3 Peel the back of the other Hook and Loop Fastener film sheet (See fig. D-3). 4 Stick the Hook and Loop Fastener to a flat surface of the car interior (See fig. D-4). 5 Match the Hook and Loop Fasteners to fasten the unit
(See fig. D-5). Notes Do not place the unit or the Hook and Loop Fastener onto places such as :
the shift lever or the hand brake around the moving parts of the drivers seat or the passengers seat in direct sunlight, such as on the dashboard or steering wheel, where it may deform where the unit stands vertically. Remove any dirt or dust from surfaces before attaching the fasteners. Fuse Replacement If this unit does not work correctly, check the fuse of the cigarette lighter plug. If the fuse is blown, replace it (See fig. E). 1 Pull this unit out of the cigarette lighter socket. 2 Detach the end of the plug by turning it counter-clockwise. 3 Take out the fuse. 4 Check the fuse. If the fuse is blown, go to Step 5. If the fuse is not blown, go to Step 6. 5 Install a new fuse. Use a fuse of the correct amperage, as stated on the fuse compartment of this unit (1 A, 125 V, 20 mm). 6 Insert the fuse. 7 Reattach the end of the plug by turning it clockwise firmly. Notes Use of a higher amperage fuse may cause serious damage or fire. Do not use a piece of wire instead of a fuse. If the replaced fuse blows again, consult your dealer. Precautions On safety Do not connect or operate this unit, a car radio, or a WALKMAN while driving or waiting at a traffic signal. Park in a safe place first. Unplug this unit from the cigarette lighter socket whenever the engine of the car is not running. Depending on the car type, even if the ignition key is off, the power supply may not turn off automatically. In this case, this may cause unnecessary car battery consumption. When not in use, unplug this unit from the cigarette lighter socket and store in a safe place where it will not interfere with your driving or become entangled in parts of the car interior (seat, door, etc.). To disconnect the unit, grasp the unit and pull it. Never pull the cord connected to the unit. Should any liquid or solid object fall into the unit, disconnect the unit from the cigarette lighter socket and the equipment and have the unit checked by qualified personnel before operating it any further. Installation Do not place this unit in a location where it is:
subject to extreme high temperature. subject to direct sunlight or near a heat source. subject to mechanical vibration or shock. subject to excessive dust. Be sure to fully secure the connected device connected to the unit to avoid moving when braking. Operation Never yank or pull the cables. This may cause malfunctions or wire breaks. To prevent damage, be careful not to drop or hit the unit. This may cause a mechanical shock or malfunctions to the unit. This unit may become warm while using. This is not a malfunction. After using, disconnect the unit from the cigarette lighter socket and the equipment. On charging Make sure the current and voltage of the WALKMAN rechargeable device match the outlet. For safety, if the input current is too high, the unit will automatically shut down. To avoid short-circuiting, do not allow the terminals of the unit or connector to touch any metal object. Note that data stored in the WALKMAN connected to this unit may be lost or damaged if the engine is started or stopped with this unit inserted into the cigarette lighter socket. Troubleshooting Should any problem persist after you have made the following checks, consult your nearest Sony dealer. There is no sound from the WALKMAN to the car radio. This unit is not fully plugged into the cigarette lighter socket. c Insert this unit correctly and securely. This unit is not fully connected to the WALKMAN. c Connect this unit correctly and securely. The transmission frequency of the unit and the FM car radio do not coincide. c Set both the unit and the FM car radio to the same frequency. There is no sound from the connecting WALKMAN. c Start playback on the WALKMAN. c Set the volume control of the WALKMAN as high as possible but not so high that the audio signal becomes distorted. The volume is low. The volume of the WALKMAN is set too low. c Set the volume control of the car audio unit as high as possible but not so high that the audio signal becomes distorted. The sound is distorted. The bass boost function on the WALKMAN is on. c Cancel the bass boost function. Noise is generated. The frequency of the unit does not coincide with the FM car radio. c Set the unit and the FM car radio to the same frequency. The reception from this unit is not good. c Route the antenna cable for the unit inside the car. Position the antenna close to the car antenna, or stabilize the antenna cable with the magnet to the passengers seat rail, and so on. This may help to improve the reception from this unit. The FM car radio receives a broadcast signal. c Select an empty frequency (a non-broadcast frequency, indicated by a static hissing sound). The selected frequency is occupied or the signal is jammed. c Select another open frequency which is less influenced by jamming
(a non-broadcast frequency, indicated by a static hissing sound). The sound is interrupted. The signal is jammed locally. c Select another frequency which is less influenced by jamming (a non-broadcast frequency, indicated by a static hissing sound). The frequency display window does not light. This unit is not completely plugged into the cigarette lighter socket. c Insert this unit correctly and securely. Depending on the car type, the engine must be started for electric current to flow to the cigarette lighter socket. c Start the engine. The fuse is blown. c Replace the fuse. Specifications Transmission system multiplex stereo Transmission frequency 88.1 MHz 107.9 MHz (0.1 MHz step) Electric strength less than 250 V/m (3 m) Power voltage DC 12 V (only for negative # grounded cars) Input WM-PORT connector Rated output voltage DC 5.0 V Rated output current 800 mA Dimensions 34 19.5 24.2 Unit: mm 20.5 78 83.9 WM-PORT cable length Approx. 0.5 m (1.6 ft) Cigarette lighter plug cable length Approx.1 m (3.3 ft) Antenna cable length Approx.1.5 m (4.9 ft) Mass Approx. 130 g (4.6 oz) (including cables) Supplied accessories Operating Instructions (1) Warranty (1) Hook and Loop Fasteners (1 pair) Design and specifications are subject to change without notice. Franais AVERTISSEMENT Pour viter tout risque dincendie ou de choc lectrique, nexposez pas lappareil la pluie ou lhumidit. Pour prvenir les risques dlectrocution, nouvrez pas le botier. Confiez lentretien de lappareil un technicien qualifi uniquement. Nous vous mettons en garde contre le fait que tout changement ou modification non expressment approuv dans le prsent manuel peut invalider votre droit utiliser cet appareil. Lnonc suivant de la FCC sapplique uniquement la version du modle fabrique pour la vente aux tats-Unis. Dautres versions peuvent ne pas se conformer la rglementation technique de la FCC. Remarque Cet appareil est conforme la partie 15 de la rglementation FCC et la rgle IC RSS-Gen. Son utilisation est autorise seulement aux les deux conditions suivantes :
(1) il ne doit pas produire de brouillage nuisible et (2) lutilisateur du dispositif doit accepter toute interfrence reue, mme si cette interfrence est susceptible de compromettre le fonctionnement du dispositif. Caractristiques Cet appareil vous permet dcouter de la musique stocke sur des appareils audio portables par lintermdiaire dun autoradio FM. La musique stocke sur des appareils audio portables tels quun lecteur HDD, une mmoire flash, un MD ou CD WALKMAN*1 ou un iPod*2, etc., est transmise lautoradio du vhicule via les ondes radio FM. Son clair et stable Avec le cble dantenne metteur flexible, il est possible de transmettre une onde radio FM stable dans nimporte quelle voiture. Le cble dantenne metteur flexible dispose dun aimant permettant de le relier une partie mtallique de la voiture. Une slection numrique des frquences, au lieu dune slection analogique, permet une transmission plus stable et claire. Possibilit de slectionner des frquences dans la gamme tendue des missions FM (88,1 107,9 MHz) Vous pouvez trouver une frquence libre pour la transmission, mme dans des endroits o de nombreuses stations sont diffuses. 4 touches de mmoire directe En mmorisant les frquences les plus utilises sur les 4 touches de mmoire, vous pouvez slectionner une frquence dune seule pression. Fentre daffichage de la frquence rtroclaire Rtroclairage et angle daffichage rglable pour une meilleure visibilit dans votre vhicule. Alimentation USB Cet appareil alimente un Walkman ou un iPod USB rechargeable.*3 Modles compatibles (au mois daot 2007) Walkman : Srie NW-A1200, srie NW-E500, srie NW-E400, iPod :
srie NW-E300, srie NW-E000, srie NW-S700, srie NW-S200 iPod 4me gnration ou ultrieure, iPod mini, iPod nano, iPod shuffle 2me gnration ou ultrieure Format compact Le format compact de cet appareil vous permet de lutiliser sur lallume-
cigare. Il est conu de sorte ne prsenter une partie saillante que dans une direction, ainsi lorsquil est install, il peut tre pivot afin de noccasionner aucune gne autour de lallume-cigare. Pas de piles sches Cet appareil se branche sur une batterie de voiture 12 V ou 24 V CC
(allume-cigare) disponible dans la majorit des voitures et camions.
*1 WALKMAN et le logo WALKMAN sont des marques dposes de Sony Corporation. iPod est une marque de commerce de Apple Inc.
*2
*3 Il est possible que cet appareil nalimente pas certains appareils USB rechargeables. Pour plus dinformations sur les appareils pris en charge, reportez-vous au catalogue ou la page daccueil. Position et fonctions des pices 1 Fentre daffichage 6 Aimant 7 Cble dantenne des frquences 3 Touche de frquence +/
4 Touches de mmoire Utilisation Veillez installer cet appareil pendant que le moteur du vhicule tourne. Si lappareil reste connect lallume-cigare alors que le moteur du vhicule est coup, la batterie du vhicule risque de se dcharger. Ne raccordez pas ou ne faites pas fonctionner cet appareil, un autoradio ou un appareil portable lorsque vous conduisez ou que vous tes arrt un feu de circulation. Commencez par vous stationner dans un endroit sr. Remarques Assurez-vous que cet appareil est correctement install pour ne pas gner la conduite. Neffectuez jamais de raccordements ni de manipulations pendant que votre voiture roule. Pour plus de dtails sur lautoradio, lantenne de lautoradio et lappareil raccord, reportez-vous au mode demploi fourni avec chacun dentre eux. Rglez lautoradio 1 Rglez votre autoradio FM. 2 Slectionnez un canal dont la rception des missions FM est mdiocre entre 88,1 MHz et 107,9 MHz. Les conditions de rception FM peuvent changer au fur et mesure que vous vous dplacez. Si la frquence slectionne devient occupe par un signal dmission, slectionnez une autre frquence libre. Remarque Baissez le volume avant de rgler lautoradio. Installez lappareil 1 Raccordez la mini-fiche stro la prise casque de lappareil audio portable. Si votre appareil audio portable prsente des rglages diffrents pour le casque et pour LINE OUT, rglez lappareil audio portable au mme rglage que le casque. Le son peut tre dform sil est connect LINE OUT. 2 Insrez correctement lappareil dans lallume-cigare jusqu ce que la frquence saffiche sur la fentre daffichage de la frquence (Voir fig. A-1). 3 Appuyez plusieurs fois sur la touche de frquence +/ pour slectionner la mme frquence que celle rgle sur lautoradio. chaque pression, la frquence change par incrments de 0,1 MHz, passant par cycle entre 88,1 MHz et 107,9 MHz. Conseils Vous pouvez rgler langle pour que les indications de lcran soient bien visibles (Voir fig. A-2). Maintenez la touche de frquence +/ enfonce pour changer la frquence rapidement. la prochaine mise sous tension de lappareil, il reste rgl la dernire frquence slectionne. 4 Dmarrez la lecture sur lappareil audio portable. Remarques Nactivez pas la fonction damplification des graves ou dgaliseur sur lappareil audio portable. Sinon le son risque dtre dform. Rglez la commande du volume de lappareil audio portable un niveau aussi lev que possible, mais pas au point de dformer le signal audio. Si le son est encore faible, augmentez le volume sur lautoradio. 5 Faites passer le cble dantenne lintrieur de la voiture pour amliorer la rception de lappareil. Linstallation du cble dantenne diffre selon le type de votre voiture. Testez linstallation pour trouver la meilleure position de rception, puis installez le cble dantenne (voir fig. B). Remarques Faites passer le cble dantenne prs de lantenne de la voiture. Ceci peut amliorer la rception de votre appareil. Pour plus de dtails sur lantenne de lautoradio, reportez-vous au mode demploi du vhicule. propos de laimant du cble dantenne Le cble dantenne est fourni avec un aimant fix son extrmit. Il est utilis pour relier le cble une partie mtallique du vhicule, comme la glissire du sige passager. Laimant lextrmit du cble dantenne sert fixer la position de rception optimale de lantenne et empcher quelle ne bouge, par exemple lorsque les passagers entrent dans la voiture ou quils en sortent. Pour utiliser laimant du cble dantenne, effectuez les oprations suivantes. (Voir fig. C) 1 Faites passer le cble dantenne l o la rception de lappareil est la meilleure. 2 Fixez laimant lextrmit du cble dantenne sur une partie mtallique du vhicule, sur la glissire du sige passager par exemple, afin de maintenir le cble dantenne en place. 3 Si, ltape 2, la rception de lappareil devient mauvaise aprs la fixation de laimant lextrmit du cble dantenne sur la glissire du sige passager, etc., revenez la position prcdente
(meilleure rception possible) de ltape 1, sans utiliser laimant
(sans le fixer sur la glissire du sige passager, etc.). Remarques Veillez aligner le cble afin quil ne gne pas la conduite, quil ne se coince pas lors des mouvements des passagers ou quil ne soit pas endommag lors du rglage des siges, etc. Si laimant est fix proximit dobjets mobiles, tels que des portires ou des glissires de siges, vrifiez que le cble dantenne ne se coince pas. Ceci risquerait de provoquer une rupture du cble. Ne laissez pas de disquettes, de cartes de crdit personnelles dots dun codage magntique proximit de laimant du cble dantenne. Si la rception de cet appareil dcline Si la rception de cet appareil dcline alors quelle tait bonne au dbut, essayez dappliquer les solutions suivantes, selon les circonstances. Aprs linstallation, la rception de cet appareil dcline lorsque vous conduisez. c Dans certains endroits (parc de stationnement souterrain, derrire de grands btiments, etc.), la rception des missions FM risque dtre mdiocre. Si lautoradio et cet appareil sont installs dans un tel endroit, en raison dune rception des missions FM mdiocre, la frquence que vous avez rgle pour cet appareil peut dj tre occupe. Dans ce cas, la station de lmission FM occupe est reue lorsque ses conditions de rception samliorent (alors que vous conduisez) ce qui provoque des interfrences avec la mme frquence rgle sur cet appareil. Dans ce cas, rglez de nouveau lautoradio et cet appareil une autre frquence libre dans un endroit o la rception des missions FM est meilleure. La rception de lappareil sinterrompt pendant que vous conduisez. c Les conditions de rception des missions FM varient au fur et mesure que vous vous dplacez. Aprs avoir rgl une frquence libre dans un endroit, celle-ci peut tre occupe par le signal dune station diffuse lorsque vous vous dplacez. En pareil cas, rglez la frquence sur lautoradio et sur cet appareil une autre frquence libre. Des interfrences ou des parasites se produisent. c Dautres missions FM ou des missions sans autorisation en ville peuvent interfrer avec la rception de la frquence dfinie pour cet appareil. Dans ce cas, rglez lautoradio et cet appareil une frquence moins susceptible dtre perturbe. Mmorisation de la frquence slectionne Le rglage par dfaut des touches de mmoire est 88,1 MHz. Slectionnez une frquence ltape 3 Installez lappareil , puis maintenez lune des touches de mmoire enfonce jusqu ce que le numro de la touche saffiche dans la fentre daffichage de la frquence. Une fois la frquence souhaite mmorise, vous pouvez la slectionner en appuyant sur la touche de mmoire. Remarque Si une frquence est dj mmorise sur la touche, elle est remplace par la nouvelle. Mise en charge dun appareil Vous pouvez charger un Walkman et un iPod USB rechargeable. Certains modles ne peuvent toutefois pas tre rechargs avec cet appareil. Pour connatre ces modles, reportez-vous Modles USB rechargeables , au dernier catalogue ou la page daccueil. 1 Rglez le commutateur de slection dappareil rechargeable Sony ou iPod , selon lappareil utilis. (Voir fig. D-1) Rglez le commutateur Sony pour charger un Walkman ou iPod pour charger un iPod. Remarque Veillez rgler correctement le commutateur de slection dappareil rechargeable. Un rglage incorrect peut endommager cet appareil ou lappareil USB rechargeable. 2 Branchez lappareil USB rechargeable cet appareil laide du cble USB fourni. (Voir fig. D-2) Selon votre modle, lutilisation dun cble USB peut tre inutile. Installez lappareil dans un endroit sr. 3 Mettez lappareil recharger. Toutefois, ceci peut savrer inutile. 4 Lorsque la charge est termine, dbranchez cet appareil de lappareil USB rechargeable. Remarques Branchez correctement lappareil dans lallume-cigare. Il est possible que cet appareil ne puisse pas tre insr selon la position ou la forme de lallume-cigare. Branchez lappareil de sorte quil ne bouge pas en cas de freinage brusque. Veillez acheminer les cbles correctement de sorte que :
ils ne gnent pas la conduite ;
ils ne coincent pas dans des lments de lhabitacle (siges, portes, etc.) ou nentravent pas les mouvements des passagers ;
ils ne soient pas endommags lors du rglage des siges, provoquant une rupture du cble ;
ils soient hors de porte des enfants. Installez lappareil de sorte quil nentrave pas le fonctionnement de lairbag en cas durgence. Narrachez pas et ne tirez jamais le cble USB raccord lappareil. Ceci risquerait de provoquer des problmes de fonctionnement ou une rupture des cbles. Nutilisez pas lappareil dans un endroit soumis des projections liquides ou lhumidit afin dviter tout risque dincendie ou dlectrocution. Le fonctionnement nest pas garanti si vous utilisez un concentrateur USB ou un prolongateur USB. Conformez-vous la mthode de raccordement adapte lappareil audio portable (Walkman ou iPod). Certains appareils ne fonctionnent pas pendant la mise en charge. Pour de plus amples informations, reportez-vous au mode demploi fourni avec lappareil. Modles USB rechargeables (au mois daot 2007) Les modles suivants sont pris en charge, selon la position du commutateur de slection dappareil rechargeable. Sony : Srie NW-A1200, srie NW-E500, srie NW-E400, srie NW-E300, srie NW-E000, srie NW-S700, srie NW-S200 iPod : iPod 4me gnration ou ultrieure, iPod mini, iPod nano, iPod shuffle 2me gnration ou ultrieure Suite de lautre ct DCC-NWFMT1_UC [US, FR, ES] 4-111-429-11(1)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-06-24 | 88.1 ~ 107.9 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2008-06-24
|
||||
1 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 | FCC Registration Number (FRN) |
0003739166
|
||||
1 | Physical Address |
1-7-1 Konan
|
||||
1 |
Tokyo, N/A 108-0075
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
M******@us.ul.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AK8
|
||||
1 | Equipment Product Code |
DCCNWFMT1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R****** T********
|
||||
1 | Title |
Senior Manager
|
||||
1 | Telephone Number |
81-50********
|
||||
1 | Fax Number |
81-50********
|
||||
1 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
UL Japan Inc
|
||||
1 | Name |
M**** F********
|
||||
1 | Physical Address |
4383-326 Asama-cho
|
||||
1 |
Ise-shi, Mie-ken, 516-0021
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-59********
|
||||
1 | Fax Number |
81-59********
|
||||
1 |
M******@jp.ul.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
UL Japan Inc
|
||||
1 | Name |
Y**** A******
|
||||
1 | Physical Address |
4383 Asama-cho
|
||||
1 |
Ise-shi, Mie-ken, 516-0021
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-59********
|
||||
1 | Fax Number |
81-59********
|
||||
1 |
Y******@jp.ul.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/25/2008 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Car FM Stereo Transmitter | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Japan, Inc
|
||||
1 | Name |
M******** F******
|
||||
1 | Telephone Number |
81-59********
|
||||
1 | Fax Number |
81-59********
|
||||
1 |
m******@jp.ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 88.10000000 | 107.90000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC