all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 737.55 KiB | / June 04 2007 | |||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | / June 04 2007 | ||||||
1 | Internal Photos | / June 04 2007 | ||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | / June 04 2007 |
1 | Users Manual | Users Manual | 737.55 KiB | / June 04 2007 |
3-095-507-11(1) Micro HI-FI Component System Operating Instructions Owners Record Th e model and serial numbers are located on the rear of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. ______________ Serial No. ______________ CMT-BX5BT 2007 Sony Corporation CMT-BX5BT.GB.3-095-507-11(1) The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations. WARNING Th is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Th ese limits are designed to provide reasonable protection against harmful interference in a residential installation. Th is equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION You are cautioned that any changes or modifi cations not expressly approved in this manual could void your authority to operate this equipment. Th is equipment must not be co-located or operated in conjunction with any other antenna or transmitter. WARNING To reduce the risk of fi re or electric shock, do not expose this apparatus to rain or moisture. CAUTION Th e use of optical instruments with this product will increase eye hazard. Notice for the customers in the U.S.A Th is symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of suffi cient magnitude to constitute a risk of electric shock to persons. Th is symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note to CATV system installer:
Th is reminder is provided to call the CATV system installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifi es that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 2GB CMT-BX5BT.GB.3-095-507-11(1) Th is eq radiati uncon FCC r Guidel Th is eq level th FCC r Guidel withou evalua it shou least 2 and pe hands, U.S.A mode Note A Dua which one sid the oth materi Comp this pr Music prote Th is pr discs t
(CD) s discs e techno compa those d confor be play CMT-
pplies el S.A. with found B the d to t es, ere l
, ect e he tlet which ed or d in ty to ed or her Th is equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. Th is equipment has a very low RF energy level that is deemed to comply with FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm and more between the radiator and persons body (excluding extremities:
hands, wrists, feet and legs). U.S.A., Canadian and Australian models only ENERGY STAR is a U.S. registered mark. As an ENERGY STAR partner, Sony Corporation has determined that this product meets the ENERGY STAR guidelines for energy effi ciency. Note on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Music discs encoded with copyright protection technologies Th is product is designed to playback discs that conform to the Compact Disc
(CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. CMT-BX5BT.GB.3-095-507-11(1) Th e Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Th omson. 3GB Others Troubleshooting .................................25 Messages ...............................................28 Precautions ...........................................29 Specifi cations ......................................31 Bluetooth wireless technology .....32 Playable Bluetooth devices ............34 Table of Contents Guide to parts and controls ............. 5 Information on the display ............... 9 Getting Started Hooking up the system securely ..................................................10 Setting the clock ................................11 Basic Operations Playing a CD/MP3 disc .....................12 Listening to the radio .......................13 Using the Bluetooth function ........14 Using optional audio components .........................................20 Adjusting the sound .........................20 Changing the display .......................21 Other Operations Creating your own program
(Program Play) .....................................22 Presetting radio stations .................23 Using the Timers .................................24 4GB CMT-BX5BT.GB.3-095-507-11(1) Guide to parts and controls Th is manual mainly explains operations using the remote, but the same operations can also be performed using the buttons on the unit having the same or similar names. Unit (HCD-BX5BT/Compact Disc Receiver) Front panel i G u d e t o p a r t s a n d c o n t r o l s Top panel CMT-BX5BT.GB.3-095-507-11(1) Continued 5GB BLUETOOTH indicator (page 18, 19, 19) Lights up when the Bluetooth function is active. BLUETOOTH OPR button (page 16, 18, 19, 19) Press to make a connection, disconnection, or pairing with a Bluetooth device. AUDIO IN jack (page 20) Connect to an optional audio component. PHONES jack Connect the headphones. Playback buttons and function buttons Unit: BLUETOOTH (play/
pause) button (page 15, 16, 16) Press to select the Bluetooth function. Press to start or pause playback of the music on the Bluetooth device (Bluetooth mobile phone, etc.). Unit: CD (play/pause) button (page 12) Press to select the CD function. Press to start or pause playback of a disc. Remote: CD button (page 12) Press to select the CD function. Remote (RM-SC31)
/ (power) button (page 11, 24, 27, 27) Press to turn on the system. STANDBY indicator (page 21, 25) Lights up when the system is turned off . Remote sensor (page 25)
(open/close) button (page 12) Press to open or close the disc tray. 6GB CMT-BX5BT.GB.3-095-507-11(1) Remo
(pa Press t TUNE Press t Press t mode. Remo 20) Press t FUNC Press t DISPL Press t display PLAY butto Press t MP3 d Press t Soun Unit:
Remo Press t Unit:
butto Remo 12, 13 Press t CMT-
i G u d e t o p a r t s a n d c o n t r o l s 18, ion ge on y/
6) on. he etooth disc.
) Remote: (play) button,
(pause) button Press to start or pause playback. TUNER/BAND button (page 13) Press to select the TUNER function. Press to select FM or AM reception mode. Remote: AUDIO IN button (page 20) Press to select the AUDIO IN function. FUNCTION button (page 18, 19) Press to select the function. DISPLAY button (page 16, 21) Press to change the information on the display. PLAY MODE/TUNING MODE button (page 12, 13, 22, 23) Press to select the play mode of a CD or MP3 disc. Press to select the tuning mode. Sound buttons (page 20) Unit: DSGX button Remote: EQ button Press to select the sound eff ect. Unit: /CANCEL (stop/cancel) button (page 12, 13, 15, 16, 18) Remote: (stop) button (page 12, 13, 15, 16, 18) Press to stop playback. ENTER button (page 11, 22, 23, 24) Press to enter the settings.
/ (go back/go forward) button (page 12, 15, 16, 22) Press to select a track or fi le. Unit: TUNE +/ (tuning) button
(page 13) Remote: +/ (tuning) button
(page 13, 23) Press to tune in the desired station.
+/ (select folder) button
(page 12, 15, 22) Press to select a folder.
/ (rewind/fast forward) button (page 12, 15, 16) Press to fi nd a point in a track or fi le. Unit: VOL +/ button (page 12, 13, 16, 19, 20) Remote: VOLUME +/ button
(page 12, 13, 16, 19, 20) Press to adjust the volume. CLOCK/TIMER SELECT button
(page 24) CLOCK/TIMER SET button (page 11, 24) Press to set the clock and the Play Timer. Continued 7GB CMT-BX5BT.GB.3-095-507-11(1) REPEAT/FM MODE button (page 12, 13) Press to listen to a disc, a single track or fi le repeatedly. Press to select the FM reception mode
(monaural or stereo). Battery compartment lid
(page 11) CLEAR button (page 16, 18, 22) Press to delete a pre-programmed track or fi le. Press to erase the pairing registration information of the Bluetooth device. TUNER MEMORY button (page 23) Press to preset the radio station. SLEEP button (page 24) Press to set the Sleep Timer. Info Funct MP3 Lights DSGX Tune Text i 8GB CMT-BX5BT.GB.3-095-507-11(1) CMT-
i G u d e t o p a r t s a n d c o n t r o l s Information on the display Function MP3 Lights up when an MP3 disc is loaded. DSGX (page 20) Tuner reception (page 13) Text information Timer (page 24) Play mode (page 12) Tuner reception mode (page 13) Play/Pause 9GB CMT-BX5BT.GB.3-095-507-11(1) Getting Started Hooking up the system securely Left speaker Right speaker or Speaker cord (Red/) Speaker cord (Black/) AM loop antenna FM lead antenna (Extend it horizontally.) Connect white side. 10GB Wall socket Speakers Insert only the stripped portion of the speaker cords into the SPEAKER jacks. Antennas Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise. Po Conne If the p detach for mo When 1 Rem me 2 Pre fun 3 Hol DSG on t 4 Afte pow To use Slide a compa suppli fi rst, m below. Notes With abou Do n mix d If you of tim from CMT-BX5BT.GB.3-095-507-11(1) CMT-
G e t t i n g S t a r t e d Setting the clock Use buttons on the remote to set the clock. 1 Press / to turn on the system. 2 Press CLOCK/TIMER SET . If the current mode appears on the display, press /
repeatedly to select CLOCK SET and then press ENTER . 3 Press / repeatedly to set the hour, and then press ENTER . 4 Use the same procedure to set the minutes. Th e clock settings are lost when you disconnect the power cord or if a power failure occurs. To display the clock when the system is off Press DISPLAY . Th e clock is displayed for about 8 seconds. 11GB Power Connect the power cord to a wall socket. If the plug does not fi t the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). When carrying this system 1 Remove a disc to protect the CD mechanism. 2 Press CD to select the CD function. 3 Hold down TUNER/BAND and DSGX on the unit, and press on the unit until STANDBY appears. 4 After LOCK appears, unplug the power cord. To use the remote Slide and remove the battery compartment lid , and insert the two supplied R6 (size AA) batteries, side fi rst, matching the polarities shown below. Notes With normal use, the batteries should last for about six months. Do not mix an old battery with a new one or mix diff erent types of batteries. If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. CMT-BX5BT.GB.3-095-507-11(1) he cks. hat et up peaker Other operation To Pause playback (or CD on the Press unit) . To resume play, press the button again. Stop playback . Select a folder on an MP3 disc Select a track or fi le Find a point in a track or fi le
+/ . Hold down /
during playback, and release the button at the desired point. REPEAT repeatedly until REP or REP1 appears. Select Repeat Play To change the play mode Press PLAY MODE repeatedly while the player is stopped. You can select normal play (
* for all MP3 fi les in the folder on the disc), shuffl e play
(SHUF or play (PGM).
* When playing a CD-DA disc, SHUF*), or program
(SHUF) Play performs the same operation as normal
(shuffl e) play. Notes All tr repea REP repea Notes Do n unne fi les. Folde MP3 they Th e s a fi le If the
.MP fi les, malfu Th e m fol M M co fol is Com soft w medi MP3 audio Notes If the sessio MP3 back. A dis as a C Basic Operations Playing a CD/MP3 disc 1 Select the CD function. Press CD . 2 Place a disc. Press on the unit, and place a disc with the label side up on the disc tray. To close the disc tray, press on the unit again. Do not force the disc tray closed with your fi nger, as this may damage the unit. 3 Start playback. Press (or CD on the unit)
. 4 Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit) . 12GB CMT-BX5BT.GB.3-095-507-11(1) CMT-
the e on
, and t the edly P1 while t s ay ram HUF) normal Notes on Repeat Play All tracks or fi les on a disc are played repeatedly up to fi ve times. REP1 indicates that a single track or fi le is repeated until you stop it. Notes on playing MP3 discs Do not save other types of fi les or unnecessary folders on a disc that has MP3 fi les. Folders that have no MP3 fi les are skipped. MP3 fi les are played back in the order that they are recorded onto the disc. Th e system can only play MP3 fi les that have a fi le extension of .MP3. If there are fi les on the disc that have the
.MP3 fi le extension, but that are not MP3 fi les, the unit may produce noise or may malfunction. Th e maximum number of:
folders is 255 (including the root folder). MP3 fi les is 511. MP3 fi les and folders that can be contained on a single disc is 512. folder levels (the tree structure of fi les) is 8. Compatibility with all MP3 encoding/writing soft ware, recording device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted audio or may not play at all. Notes on playing multisession discs If the disc begins with a CD-DA (or MP3) session, it is recognized as a CD-DA (or MP3) disc, and other sessions are not played back. A disc with a mixed CD format is recognized as a CD-DA (audio) disc. CMT-BX5BT.GB.3-095-507-11(1) Listening to the radio 1 Select FM or AM. Press TUNER/BAND repeatedly. 2 Select the tuning mode. Press TUNING MODE repeatedly until AUTO appears. 3 Tune in the desired station. Press +/ (or TUNE +/ on the unit) . Scanning stops automatically when a station is tuned in, and then TUNED and ST (for stereo programs only) appear. B a s i c O p e r a t i o n s 4 Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit) . To stop automatic scanning Press . To tune in a station with a weak signal If TUNED does not appear and the scanning does not stop, press TUNING MODE repeatedly until AUTO and PRESET disappear, and then press
+/ (or TUNE +/ on the unit) repeatedly to tune in the desired station. To reduce static noise on a weak FM stereo station Press FM MODE repeatedly until MONO appears to turn off stereo reception. 13GB Using the Bluetooth function Th is system supports Bluetooth A2DP and AVRCP profi les. For details on Bluetooth wireless technology, see Bluetooth wireless technology (page 32). Check the websites below for the latest information about compatible devices. For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
<http://www.sony.ca/
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
Listening to music of a Bluetooth mobile phone or Bluetooth device You can listen to music from your Bluetooth mobile phone or Bluetooth device over a wireless connection. Follow the procedure below to listen to music from Bluetooth devices with this system. Pairing this system with a Bluetooth device Connecting to registered devices Playing music of a Bluetooth device For details about the operations of the Bluetooth device, also refer to the operation manual supplied with your Bluetooth device. Pairin device Pairin device before to pair device perfor perfor compl a Blue 1 Pla co 1 m 2 Se Pre the 3 Op an op Fo the op Blu Wh the dev Blu on Th BX Wh thi
(A dev no can op 14GB CMT-BX5BT.GB.3-095-507-11(1) CMT-
th n to this oth ce he ur Pairing this system with a Bluetooth device Pairing is an operation where Bluetooth devices register with each other beforehand. Use the procedure below to pair the system with your Bluetooth device. Once a pairing operation is performed, it does not need to be performed again. If pairing is already completed, proceed to Playing music of a Bluetooth device (page 16). 1 Place the Bluetooth device to be connected to this system within 1 meter of the system. 2 Select the Bluetooth function. Press BLUETOOTH on the unit. 3 Operate the Bluetooth device and perform the pairing operation. For details about the operations of the Bluetooth device, refer to the operation manual supplied with your Bluetooth device. When searching for this system with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device. Th is system appears as CMT-
BX5BT. When establishing a connection with this system, select the audio profi le
(A2DP, AVRCP) at the Bluetooth device. If the Bluetooth device does not support the AVRCP profi le, you cannot perform playback or other operations with the system (page 16). B a s i c O p e r a t i o n s 4 Enter the passcode. Passcode entry may be required depending on the type of Bluetooth device. When PIN appears, enter the passcode at the system as follows:
+/ and /
Press / and / on the remote (or on the unit) to enter the same passcode that was entered at the Bluetooth device, and then press ENTER . Once pairing is completed and the connection is established, the system display changes as follows:
CONNECT Name of the Bluetooth device To cancel passcode entry partway Press . Notes Passcode may be called Passkey, PIN code, PIN number or Password, etc. depending on the device. Th is system only supports numerical passcodes up to 4 digits. Th e pairing standby status of the system is cancelled aft er about 30 seconds. If pairing is not successful, redo the procedure from step 1. While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device. Continued 15GB CMT-BX5BT.GB.3-095-507-11(1) To erase all the pairing registration information 1 Press BLUETOOTH on the unit. When the system is connected with a Bluetooth device (when the Bluetooth device name or other information appears in the system display), press and hold BLUETOOTH OPR on the unit for about 2 seconds to put the system in Bluetooth standby mode. 2 Press CLEAR . DELETE? appears. 3 Press ENTER . COMPLETE appears and all the pairing information is erased. Note In order to connect with a Bluetooth device aft er performing this operation, you must enter the passcode again. Playing music of a Bluetooth device You can operate a Bluetooth device by connecting the system and a Bluetooth device using AVRCP. If the system is not connected with a Bluetooth device using AVRCP, NOT IN USE appears when you operate the system. 1 Select the Bluetooth function. Press BLUETOOTH on the unit. 2 Establish a connection from the Bluetooth device. For details about the operations of the Bluetooth device, refer to the operation manual supplied with your Bluetooth device. Once the connection is established, the system display changes as follows:
CONNECT Name of the Bluetooth device 16GB Notes device If you Bluet opera Bluet Depe you c of the When is pre headp a con anoth 3 Start playback. Press (or BLUETOOTH on the unit) . Depending on the Bluetooth device, you may need to start up the AV soft ware of the Bluetooth device beforehand. 4 Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit) . To check the address of a connected Bluetooth device Press DISPLAY while the Bluetooth device name appears in the system display. Th e Bluetooth device address appears for 8 seconds. To cancel the connection with a Bluetooth device Press and hold BLUETOOTH OPR on the unit for about 2 seconds until DISCONNCT appears, or until the information on the display (device name, etc.) disappears. Other operation Press To Pause playback (or BLUETOOTH on the unit) .
/ . Hold down /
. Stop playback Select a fi le Find a point in a fi le Note Th ese operations may not be available for certain Bluetooth devices. In addition, the actual operations may diff er depending on the connected Bluetooth device. CMT-BX5BT.GB.3-095-507-11(1) CMT-
on vice, V
/ on ed oth ars for il he name, TH
. r he on the Notes on connections with Bluetooth devices If you cannot connect with a paired Bluetooth device, perform the pairing operation between the system and the Bluetooth device again. Depending on the type of Bluetooth device, you can adjust the volume using the controls of the Bluetooth device. When BLUETOOTH on the unit is pressed while connected to Bluetooth headphones, it may take some time until a connection is made to the system from another Bluetooth device. Listening to music on this system using Bluetooth headphones You can listen to music played on this system using your Bluetooth headphones over a wireless connection. B a s i c O p e r a t i o n s Follow the procedure below to listen to music on this system with Bluetooth headphones. Pairing this system with Bluetooth headphones Connecting to registered headphones Playing music on this system For details about the operations of the Bluetooth headphones, also refer to the operation manual supplied with your Bluetooth headphones. Continued 17GB CMT-BX5BT.GB.3-095-507-11(1) To cancel passcode entry partway Press . Notes Passcode may be called Passkey, PIN code, PIN number or Password, etc. depending on the device. Th is system only supports numerical passcodes up to 4 digits. Th e pairing standby status of the system is cancelled aft er about 30 seconds. If pairing is not successful, redo the procedure from step 1. While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device. To erase all the pairing registration information 1 Press BLUETOOTH on the unit. When the system is connected with a Bluetooth device (when the Bluetooth device name or other information appears in the system display), press and hold BLUETOOTH OPR on the unit for about 2 seconds to put the system in Bluetooth standby mode. 2 Press CLEAR . DELETE? appears. 3 Press ENTER . COMPLETE appears and all the pairing information is erased. Note To connect with Bluetooth headphones aft er performing this operation, you must enter the passcode again. Pairing this system with Bluetooth headphones Pairing is an operation where Bluetooth devices register with each other beforehand. Use the procedure below to pair the system with your Bluetooth headphones. Once a pairing operation is performed, it does not need to be performed again. If pairing is already completed, proceed to Playing music on this system (page 19). 1 Select a function other than the Bluetooth function. Press FUNCTION repeatedly. 2 Place the Bluetooth headphones to be connected to this system within 1 meter of the system. 3 Put the Bluetooth headphones in pairing mode. For details about the operations of the Bluetooth headphones, refer to the operation manual supplied with your Bluetooth headphones. 4 Press and hold BLUETOOTH OPR on the unit for about 7 seconds until the BLUETOOTH indicator fl ashes. Sound output from the speakers is stopped. 5 Enter the passcode. Follow the same procedure as in step 4 of Pairing this system with a Bluetooth device (page 15). Once pairing is completed and the connection is established, the system display changes as follows:
CONNECT Name of the Bluetooth device 18GB Playin You ca Blueto system AVRC 1 Se Blu Pre 2 Es Blu Pre un lig If m tha pre att 3 m
(C to rec att est On the C Blu 3 Sta th De hea sys etc Fo Blu op Blu CMT-BX5BT.GB.3-095-507-11(1) CMT-
y IN c. m is ring is m step
, this ection on he ith a tooth n ress on ut the de. e aft er er the 4 Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit) . To cancel the connection with Bluetooth headphones Press and hold BLUETOOTH OPR on the unit for about 2 seconds until the BLUETOOTH indicator turns off . Notes If you cannot connect with paired Bluetooth headphones, perform the pairing operation between the system and the Bluetooth headphones again. When the system is changed to a function other than the Bluetooth function and BLUETOOTH OPR on the unit is pressed while connected to a Bluetooth device, it may take some time until a connection is made with the Bluetooth headphones. Th is system stores separate volume settings for when listening through the speakers or PHONES jack , or when listening through Bluetooth headpnoes. B a s i c O p e r a t i o n s 19GB Playing music on this system You can operate this system from Bluetooth headphones by connecting the system and Bluetooth headphones using AVRCP. 1 Select a function other than the Bluetooth function. Press FUNCTION repeatedly. 2 Establish a connection with the Bluetooth headphones. Press and hold BLUETOOTH OPR on the unit for about 2 seconds until the BLUETOOTH indicator lights up, then release the button. If more than one Bluetooth device that has been connected in the past is present around the system, the system attempts to connect with up to the 3 most recently connected devices.
(Connection is attempted with up to 3 devices in order from the most recently connected device, and the attempts end when a connection is established. Once the connection is established, the system display changes as follows:
CONNECT Name of the Bluetooth device 3 Start playback of the music for the function selected in step 1. Depending on the type of Bluetooth headphones, you can operate this system (playback, volume control, etc.) using the headphones controls. For details about the operations of the Bluetooth headphones, refer to the operation manual supplied with your Bluetooth headphones. CMT-BX5BT.GB.3-095-507-11(1) Adjusting the sound To add a sound eff ect Press To Generate a DSGX on the unit. more dynamic sound
(Dynamic Sound Generator X-tra) Set the sound eff ect EQ repeatedly to select BASS or TREBLE, and then press +/
repeatedly to adjust the level. Using optional audio components 1 Connect additional audio component to the AUDIO IN jack on the unit using an audio analog cord (not supplied). 2 Turn down the volume. Press VOLUME (or VOL on the unit) . 3 Select the AUDIO IN function. Press AUDIO IN . 4 Start playing the connected component. 5 Adjust the volume. Press VOLUME +/ (or VOL +/ on the unit) . Cha To Chang inform the dis Check clock w system 1) For e infor or fo the t stopp 2) Whe conn can v 3) Th e light Notes Char as _ Th e f to de to tim Th e f fo eit Jo Th e f ID ID
(u 20GB CMT-BX5BT.GB.3-095-507-11(1) CMT-
nit. t the Changing the display To Change information on the display1)2) Check the clock when the system is off Press DISPLAY repeatedly when the system is on. DISPLAY when the system is off 3). Th e clock is displayed for 8 seconds. 1) For example, you can view CD/MP3 disc information, such as the track or fi le number or folder name during normal play, or the total playing time while the player is stopped. 2) When the system and a Bluetooth device are connected using the Bluetooth function, you can view the Bluetooth device address. 3) Th e STANDBY indicator on the unit lights up when the system is off . Notes on the display information Characters that cannot be displayed appear as _. Th e following are not displayed:
total playing time for a CD-DA disc depending on the play mode. total playing time and remaining playing time for an MP3 disc. Th e following are not displayed correctly:
folder and fi le names that do not follow either the ISO9660 Level 1, Level 2 or Joliet in the expansion format. Th e following is displayed:
ID3 tag information for MP3 fi les when ID3 version 1 and version 2 tags are used
(up to 62 characters). CMT-BX5BT.GB.3-095-507-11(1) B a s i c O p e r a t i o n s 21GB 4 Press ENTER to add the track or fi le to the program. appears when the total program time exceeds 100 minutes for a CD, or when you select a CD track whose number is 21 or over, or when you select an MP3 fi le. 5 Repeat steps 3 through 4 to program additional tracks or fi les, up to a total of 25 tracks or fi les. 6 To play your program of tracks or fi les, press . Th e program remains available until you open the disc tray. To play the same program again, press . To cancel Program Play Press PLAY MODE repeatedly until PGM disappears while the system is stopped. To delete the last track or fi le of the program Press CLEAR while the system is stopped. Other Operations Creating your own program
(Program Play) 1 Press CD to select the CD function. 2 Press PLAY MODE repeatedly until PGM appears while the system is stopped. 3 Press / repeatedly until the desired track or fi le number appears. When programming fi les, press
+/ repeatedly to select the desired folder, and then select the desired fi le. Example: When programming tracks on a CD Selected track or fi le number Total playing time of program (including selected track or fi le) Pre stat You ca station by sele numbe Use bu station 1 Tu Li 13 2 Pre 3 Pre se nu If a to the sta 4 Pre 5 Re sto Yo AM ret you po 22GB CMT-BX5BT.GB.3-095-507-11(1) CMT-
rack otal utes CD er, or o or ks or cks until he
. until m is he s Presetting radio stations You can preset your favorite radio stations and tune them in instantly by selecting the corresponding preset number. Use buttons on the remote to preset stations. 1 Tune in the desired station (see Listening to the radio (page 13)). 2 Press TUNER MEMORY . Preset number 3 Press +/ repeatedly to select your desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new stations. 4 Press ENTER . 5 Repeat steps 1 through 4 to store other stations. You can preset up to 20 FM and 10 AM stations. Th e preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. CMT-BX5BT.GB.3-095-507-11(1) 6 To call up a preset radio station, press TUNING MODE repeatedly until PRESET appears, and then press +/
repeatedly to select the desired preset number. O t h e r O p e r a t i o n s 23GB 5 Use the same procedure as in step 4 to set the time to stop playing. 6 Select the sound source. Press / repeatedly until the desired sound source appears, and then press ENTER . Th e display shows the timer settings. 7 Press / to turn off the system. Th e system turns on 15 seconds before the preset time. If the system is on at the preset time, the Play Timer will not play. Note Before the system is turned off , if a connection is made with the Bluetooth headphones, sounds played by the Play Timer may be output to the Bluetooth headphones. To activate or check the timer again Press CLOCK/TIMER SELECT , press
/ repeatedly until PLAY SEL appears, and then press ENTER . To cancel the timer Repeat the same procedure as above until TIMER OFF appears, and then press ENTER . To change the setting Start over from step 1. Tip Th e Play Timer setting remains as long as the setting is not canceled manually. Using the Timers Th e system off ers two timer functions. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority. Sleep Timer:
You can fall asleep to music. Th is function works even if the clock is not set. Press SLEEP repeatedly. If you select AUTO, the system automatically turns off aft er the current disc stops or in 100 minutes. Play Timer:
You can wake up to CD or tuner at a preset time. Use buttons on the remote to control the Play Timer. Make sure you have set the clock. 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specifi c track or fi le, create your own program (page 22). 2 Press CLOCK/TIMER SET . 3 Press / repeatedly to select PLAY SET, and then press ENTER . ON appears, and the hour indication fl ashes. 4 Set the time to start playing. Press / repeatedly to set the hour, and then press ENTER . Th e minute indication fl ashes. Use the procedure above to set the minutes. 24GB CMT-BX5BT.GB.3-095-507-11(1) O t h e r s Connect the system to a diff erent wall socket. Install a noise fi lter (available separately) to the power cord. There is no sound. If the BLUETOOTH indicator is lit or fl ashing when a function other than the Bluetooth function is selected, no sound is heard through the speakers or PHONES jack . Press and hold BLUETOOTH OPR for about 2 seconds until the BLUETOOTH indicator turns off . The remote does not function. Remove any obstacles between the remote and the remote sensor on the unit, and position the unit away from fl uorescent lights. Point the remote at the systems sensor. Move the remote closer to the system. CD/MP3 player The sound skips, or the disc will not play. Wipe the disc clean, and replace it. Move the system to a location away from vibration (for example, on top of a stable stand). Move the speakers away from the system, or place them on separate stands. At high volume, speaker vibration may cause the sound to skip. Play does not start from the fi rst track. Press PLAY MODE repeatedly until both PGM and SHUF disappear to return to normal play. Continued 25GB Others Troubleshooting 1 Make sure the power cord and speaker cords are correctly and fi rmly connected. 2 Find your problem in the checklist below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. If the STANDBY indicator fl ashes Immediately unplug the power cord, and check the following items. If your system has a voltage selector, is the voltage selector set to the correct voltage?
Are you using only the supplied speakers?
Is anything blocking the ventilation holes on the top or back of the system?
Aft er the STANDBY indicator stops fl ashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. General Sound comes from one channel, or the left and right volumes are unbalanced. Place the speakers as symmetrically as possible. Connect only the supplied speakers. Severe hum or noise. Move the system away from sources of noise. CMT-BX5BT.GB.3-095-507-11(1) Starting playback takes more time than usual. Th e following discs take a longer time to start playback. a disc recorded with a complicated tree structure. a disc recorded in multisession mode. a disc that has not been fi nalized (a disc to which data can be added). a disc that has many folders. Bluetooth device Pairing cannot be done. Move the Bluetooth device closer to the system. Connection is not possible. Th e Bluetooth device you attempted to connect does not support the A2DP and AVRCP profi les, and cannot be connected with the system. Enable the Bluetooth function of the Bluetooth device. Th e pairing registration information has been erased. Perform the pairing operation again. While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device. The sound skips or fl uctuates, or the connection is lost. Th e system and the Bluetooth device are too far apart. If there are obstacles between the system and your Bluetooth device, remove or avoid the obstacles. If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away. 26GB Con supp plas Turn To cha Th e A to 9 kH Use bu AM tu 1 Tun turn 2 Wh
, All To r pres To imp Turn o CD po defaul 1 Pre sele off 2 Afte
dow CD play tim play unt The sound of your Bluetooth device cannot be heard on this system. Turn up the volume on your Bluetooth device fi rst, and then adjust the volume using VOLUME +/ . Severe hum or noise If there are obstacles between the system and your Bluetooth device, remove or avoid the obstacles. If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away. Turn down the volume of the connected Bluetooth device. The sound from the Bluetooth headphones is distorted. Turn down the volume of the system using VOLUME . If your headphones have a volume control, also adjust the volume using the headphones volume control. Press DSGX on the unit repeatedly until DSGX OFF appears. Press EQ repeatedly to select BASS or TREBLE, and then press repeatedly to turn down the level. Tuner Severe hum or noise, or stations cannot be received. (TUNED or ST fl ashes on the display.) Connect the antenna properly. Find a location and an orientation that provide good reception, and then set up the antenna again. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise. Connect a commercially available external antenna. CMT-BX5BT.GB.3-095-507-11(1) CMT-
vice tooth olume e, es s a vice, ve tem ol, tedly ress e r ST n that set d to e Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand. Turn off nearby electrical equipment. To change the AM tuning interval Th e AM tuning interval is factory-preset to 9 kHz (or 10 kHz, for some areas). Use buttons on the unit to change the AM tuning interval. 1 Tune in any AM station, and then turn off the system. 2 While holding down TUNER/BAND
, press / . All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure. To improve tuner reception Turn off CD player power by using the CD power management function. By default, CD power is turned on. 1 Press FUNCTION repeatedly to select the CD function, and then turn off the system. 2 After STANDBY stops fl ashing, press
/ on the unit while holding down /CANCEL on the unit. CD POWER OFF appears. With CD player power turned off , disc access time is increased. To turn on CD player power, repeat the procedure until CD POWER ON appears. CMT-BX5BT.GB.3-095-507-11(1) To reset the system to factory settings If the system still does not operate properly, reset the system to factory settings. Use buttons on the unit to reset the system to its factory default settings. 1 Disconnect and reconnect the power cord, and then turn on the system. 2 Press
, /CANCEL and
/ at the same time. All user-confi gured settings, such as preset radio stations, timer, and the clock, are deleted. O t h e r s 27GB Displa Displa Bluetooth device CONNECT: Bluetooth communication was established. DISCONNCT: Communication with a Bluetooth device was cut off for some reason, or Bluetooth communication was ended. NO DEVICE: A pairable Bluetooth device was not found, or connection was not possible. NOT IN USE: Th e system is not connected with a Bluetooth device using AVRCP. PIN: Th e system is asking for the passcode. For details, see Using the Bluetooth function (page 14). PLEASE WAIT: Th e system is readying for usage of a Bluetooth device. Messages CD/MP3 player, Tuner CD OVER: You have reached the end of the disc while pressing during playback or pause. COMPLETE: Th e preset operation ended normally. INVALID: You pressed an invalid button. LOCKED: Th e disc tray does not open. Contact your nearest Sony dealer. NO DISC: Th ere is no disc in the system, or you have loaded a disc that cannot be played. NO STEP: All of the programmed tracks or fi les have been erased. PUSH SELECT: You tried to set the clock or timer during timer operation. PUSH STOP: You pressed PLAY MODE during playback. READING: Th e system is reading information of the disc. Some buttons are not available. SET CLOCK: You tried to select the timer when the clock is not set. SET TIMER: You tried to select the timer when the Play Timer is not set. STEP FULL: You tried to program more than 26 tracks or fi les (steps). TIME NG: Th e Play Timer start and end times are set to the same time. 28GB CMT-BX5BT.GB.3-095-507-11(1) CMT-
ion h a ome tion device s not e the ing Precautions Discs that this system CAN play Audio CD CD-R/CD-RW (audio data/MP3 fi les) Discs that this system CANNOT play CD-ROM CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet or multisession CD-R/CD-RW recorded in multisession that have not ended by closing the session CD-R/CD-RW of poor recording quality, CD-R/CD-RW that have scratches or are dirty, or CD-R/CD-
RW recorded with an incompatible recording device CD-R/CD-RW which is fi nalized incorrectly Discs containing fi les other than MPEG 1 Audio Layer-3 (MP3) fi les Discs of non-standard shape (for example, heart, square, star) Discs that have adhesive tape, paper, or sticker attached to them Rental or used discs with attached seals where the glue extends beyond the seal Discs that have labels printed using ink that feels tacky when touched Notes on discs Before playing, wipe the disc with a cleaning cloth from the center out to the edge. Do not clean discs with solvents, such as benzine thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. Continued O t h e r s 29GB Display examples Display indicates 2 (two) 5 (fi ve) 6 (six) 8 (eight) 0 (zero) A B D G H K M O Q R S Z
CMT-BX5BT.GB.3-095-507-11(1) On the speaker system Th is speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV. Cleaning the cabinet Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. On safety Completely disconnect the power cord (mains lead) from the wall socket
(mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualifi ed personnel before operating it again. Th e AC power cord can be changed only by a qualifi ed service facility. On placement Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the CD player, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates. On heat buildup Heat buildup on the unit during operation is normal and is not cause for alarm. Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. Do not obstruct the ventilation holes. 30GB CMT-BX5BT.GB.3-095-507-11(1) Spe Main u Receiv AUDIO POWE HARM With 6 from 1 channe more t from 2 Amplifi C
1 Inputs A v k Outpu P h S 1 Blueto Comm B Outpu B Maxim L Freque 2 G Modul F Compa A P A C Suppor R T 1) Th e facto magn static CMT-
cally TV orted. ait n. he rgent rasive uch as Specifi cations Main unit (HCD-BX5BT/Compact Disc Receiver) AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 120 10,000Hz; rated 12 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output. Amplifi er section Continuous RMS power output
(reference): 15 + 15 watts (6 ohms at 1 kHz, 10% THD) Inputs:
Outputs:
AUDIO IN (stereo mini jack):
voltage 250 mV, impedance 47 kilohms PHONES (stereo mini jack): accepts headphones of 8 ohms or more SPEAKER: accepts impedance of 6 to 16 ohms Bluetooth section Communication system:
Bluetooth Standard version 2.0 Output:
Bluetooth Standard Power Class 2 Maximum communication range:
Line of sight approx. 10 m1) Frequency band:
2.4 GHz band (2.4000 GHz 2.4835 GHz) Modulation method:
FHSS Compatible Bluetooth profi les2):
A2DP (Advanced Audio Distribution Profi le) AVRCP (Audio Video Remote Control Profi le) Supported codecs:
Receive: SBC (Sub Band Codec), MP3 Transmit: SBC (Sub Band Codec) 1) Th e actual range will vary depending on factors such as obstacles between devices, magnetic fi elds around a microwave oven, static electricity, reception sensitivity, CMT-BX5BT.GB.3-095-507-11(1) O t h e r s antennas performance, operating system, soft ware application, etc. 2) Bluetooth standard profi les indicate the purpose of Bluetooth communication between devices. CD player section System: Compact disc and digital audio system Laser Diode Properties Emission duration: continuous Laser Output*: Less than 44.6W
* Th is output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section:
Tuning range: 87.5 108.0 MHz (100 kHz step) Antenna: FM lead antenna Antenna terminals: 75 ohms unbalanced Intermediate frequency: 10.7 MHz AM tuner section:
Tuning range:
530 1,710 kHz (with 10 kHz tuning interval) 531 1,710 kHz (with 9 kHz tuning interval) Antenna: AM loop antenna, external antenna terminal Intermediate frequency: 450 kHz Speaker (SS-CBX5) Speaker system: Full Range 10 cm, cone type Nominal impedance: 6 ohms Dimensions (w/h/d): Approx. 140 245 210 mm Mass: Approx. 1.9 kg net per speaker Continued 31GB General Power requirements: 120 V AC, 60 Hz Power consumption: 40 watts Dimensions (w/h/d) (excl. speakers):
Approx. 200 132 298 mm Mass (excl. speakers): 3.5 kg Supplied accessories: Remote Commander
(RM-SC31) (1), R6 (Size AA) batteries (2), AM loop antenna (1), FM lead antenna (1) Design and specifi cations are subject to change without notice. Standby power consumption:
0.5 W Halogenated fl ame retardants are not used in the certain printed wiring boards. Bluetooth wireless technology Bluetooth wireless technology is a short-
range wireless technology linking digital devices, such as personal computers and digital still cameras. Using the Bluetooth wireless technology, you can operate the units involved within a range of about 10 meters. Th e Bluetooth wireless technology is commonly used between two devices, but a single device can be connected to multiple devices. You do not need wires to get connected as you do with a USB connection, and you do not need to place the devices face to face as you do with wireless infrared technology. You can use the technology with one Bluetooth device in your bag or pocket. Bluetooth wireless technology is a global standard supported by thousands of companies. Th ese companies produce products that meet the global standard. Supported Bluetooth version and profi les Profi le refers to a standard set of capabilities for various Bluetooth product capabilities. Th is system supports the following Bluetooth version and profi les. Supported Bluetooth version:
Bluetooth Standard version 2.0 Supported Bluetooth profi les:
A2DP (Advanced Audio Distribution Profi le) AVRCP (Audio Video Remote Control Profi le) 32GB CMT-BX5BT.GB.3-095-507-11(1) Eff ect Blueto approx distan comm shorte Whe or o devi Loca insta Aro use Loca wav Eff ect Blueto
(IEEE band (
Blueto wirele interfe in low inabili the fol Try Blue devi met equi Turn equi devi Eff ect Th e ra may in medic may re off the mobile the fol In h at ga fl am Nea CMT-
hort-
igital s and tooth e the out 10 s es, d to cted nd s face red logy bag lobal f ce ard. d roduct he ofi les. ution Notes Th is system supports security functions that comply with the Bluetooth specifi cation as a means of ensuring security during communication using Bluetooth technology. However, this security may be insuffi cient depending on the setting contents and other factors, so always be careful when performing communication using Bluetooth technology. Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using Bluetooth technology. Bluetooth communication is not necessarily guaranteed with all Bluetooth devices that have the same profi le as this system. Bluetooth devices connected with this system must comply with the Bluetooth specifi cation prescribed by the Bluetooth SIG, Inc., and must be certifi ed to comply. However, even when a device complies with the Bluetooth specifi cation, there may be cases where the characteristics or specifi cations of the Bluetooth device make it impossible to connect, or may result in diff erent control methods, display or operation. Noise may occur or the audio may cut off depending on the Bluetooth device connected with this system, the communications environment, or surrounding conditions. O t h e r s 33GB Eff ective communication range Bluetooth devices should be used within approximately 10 meters (unobstructed distance) of each other. Th e eff ective communication range may become shorter under the following conditions. When a person, metal object, wall or other obstruction is between the devices with a Bluetooth connection Locations where a wireless LAN is installed Around microwave ovens that are in use Locations where other electromagnetic waves occur Eff ects of other devices Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency band (2.4 GHz). When using your Bluetooth device near a device with wireless LAN capability, electromagnetic interference may occur. Th is could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies:
Try connecting this system and Bluetooth mobile phone or Bluetooth device when you are at least 10 meters away from the wireless LAN equipment. Turn off the power to the wireless LAN equipment when using your Bluetooth device within 10 meters. Eff ects on other devices Th e radio waves broadcast by this system may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this system, Bluetooth mobile phone and Bluetooth device in the following locations:
In hospitals, on trains, in airplanes, at gas stations, and any place where fl ammable gasses may be present Near automatic doors or fi re alarms CMT-BX5BT.GB.3-095-507-11(1) Playable Bluetooth devices You can check the websites below for the Bluetooth compatible devices. For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
<http://www.sony.ca/
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
34GB CMT-BX5BT.GB.3-095-507-11(1) CMT-
O t h e r s 35GB CMT-BX5BT.GB.3-095-507-11(1) Printed in China CMT-BX5BT.GB.3-095-507-11(1)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-01-24 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-01-24
|
||||
1 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 | FCC Registration Number (FRN) |
0003739166
|
||||
1 | Physical Address |
1-7-1 Konan
|
||||
1 |
Tokyo, N/A 108-0075
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
H******@atcb.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AK8
|
||||
1 | Equipment Product Code |
HCDBX5BT
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R******** T********
|
||||
1 | Title |
Senior Manager
|
||||
1 | Telephone Number |
81-50********
|
||||
1 | Fax Number |
81-50********
|
||||
1 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
UL Apex
|
||||
1 | Name |
S******** W****
|
||||
1 | Physical Address |
4383-326 Asama-cho
|
||||
1 |
Ise-shi Mie-ken, 516-0021
|
|||||
1 |
Japan
|
|||||
1 | Telephone Number |
81-59********
|
||||
1 | Fax Number |
81-59********
|
||||
1 |
S******@jp.ul.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/06/2007 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Compact Disc Receiver with Bluetooth | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is Conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
UL Japan, Inc. Yokowa EMC Lab.
|
||||
1 | Name |
T****** H****
|
||||
1 | Telephone Number |
+81-5********
|
||||
1 | Fax Number |
+81-5********
|
||||
1 |
T******@jp.ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0010000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC