all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manual | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
05 Short-Term Confidential User Manual | Users Manual | 4.48 MiB | March 02 2021 / September 01 2021 | delayed release | ||
1 2 3 |
|
04 Short-Term Confidential Internal Photo | Internal Photos | 1.34 MiB | March 02 2021 / September 01 2021 | delayed release | ||
1 2 3 |
|
04 Short-Term Confidential External Photo | External Photos | 613.17 KiB | March 02 2021 / September 01 2021 | delayed release | ||
1 2 3 |
|
06 Label | ID Label/Location Info | 203.75 KiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
06 Label and Location | ID Label/Location Info | 238.78 KiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
02 FCC Authorization Letter-simple format | Cover Letter(s) | 19.55 KiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
02 FCC Request for Confidentiality Letter | Cover Letter(s) | 29.53 KiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 20.03 KiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
02 FCC Special Power of Attorney | Cover Letter(s) | 81.65 KiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 FCC RF Exposure | RF Exposure Info | 215.50 KiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 FCC Test Report DSS Module-A | Test Report | 1.85 MiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 Short-Term Confidential FCC Test Setup Photo DSS Module-A | Test Setup Photos | 623.18 KiB | March 02 2021 / September 01 2021 | delayed release | ||
1 2 3 | 07 Confidential Block Diagram | Block Diagram | March 02 2021 | confidential | ||||
1 2 3 | 07 Confidential Block Diagram-RF | Block Diagram | March 02 2021 | confidential | ||||
1 2 3 | 08 Confidential Theory of Operation | Operational Description | March 02 2021 | confidential | ||||
1 2 3 | 08 Confidential Theory of Operation-Antenna Specification | Operational Description | March 02 2021 | confidential | ||||
1 2 3 | 08 Confidential Theory of Operation-Specification Module-A | Operational Description | March 02 2021 | confidential | ||||
1 2 3 | 09 Confidential Schematics | Schematics | March 02 2021 | confidential | ||||
1 2 3 |
|
03 FCC Test Report DTS Module-A | Test Report | 4.66 MiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 Short-Term Confidential FCC Test Setup Photo DTS Module-A | Test Setup Photos | 828.27 KiB | March 02 2021 / September 01 2021 | delayed release | ||
1 2 3 |
|
03 FCC Test Report DFS Module-A | Test Report | 989.53 KiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 FCC Test Report DFS Module-B | Test Report | 3.62 MiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 FCC Test Report NII Module-A-1 | Test Report | 5.36 MiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 FCC Test Report NII Module-A-2 | Test Report | 5.53 MiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 FCC Test Report NII Module-A-3 | Test Report | 3.83 MiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 FCC Test Report NII Module-B-1 | Test Report | 3.81 MiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 FCC Test Report NII Module-B-2 | Test Report | 5.57 MiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 FCC Test Report NII Module-B-3 | Test Report | 3.08 MiB | March 02 2021 / March 04 2021 | |||
1 2 3 |
|
03 Short-Term Confidential FCC Test Setup Photo DFS Module-A | Test Setup Photos | 719.62 KiB | March 02 2021 / September 01 2021 | delayed release | ||
1 2 3 |
|
03 Short-Term Confidential FCC Test Setup Photo DFS Module-B | Test Setup Photos | 553.05 KiB | March 02 2021 / September 01 2021 | delayed release | ||
1 2 3 |
|
03 Short-Term Confidential FCC Test Setup Photo NII Module-A | Test Setup Photos | 1.42 MiB | March 02 2021 / September 01 2021 | delayed release | ||
1 2 3 |
|
03 Short-Term Confidential FCC Test Setup Photo NII Module-B | Test Setup Photos | 1.41 MiB | March 02 2021 / September 01 2021 | delayed release | ||
1 2 3 | 08 Confidential Theory of Operation-Channel List | Operational Description | March 02 2021 | confidential | ||||
1 2 3 | 08 Confidential Theory of Operation-Software Security | Operational Description | March 02 2021 | confidential | ||||
1 2 3 | 08 Confidential Theory of Operation-Specification Module-B | Operational Description | March 02 2021 | confidential |
1 2 3 | 05 Short-Term Confidential User Manual | Users Manual | 4.48 MiB | March 02 2021 / September 01 2021 | delayed release |
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\00COV-
HTA9UC2\010COV_AC_UC2.fm
010COV_AC_UC2.fm Page 1 Wednesday, November 25, 2020 2:48 PM
masterpage: Cover
Home Theatre System
Système Home Cinema
Operating Instructions
Manuel d’instructions
Manual de instrucciones
US
FR
ES
HT-A9
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\020REG.fm
masterpage: Left
010COV.book Page 2 Wednesday, November 25, 2020 3:33 PM
Owner’s Record
The model and serial numbers are
located on the bottom of the control
box. Record the serial number in the
space provided below. Refer to them
whenever you call upon your Sony
dealer regarding the speaker system.
Model No. HT-A9
Serial No.
WARNING
To reduce the risk of fire or electric
shock, do not expose this speaker
system to rain or moisture.
The AC adaptor and speaker system are
not disconnected from the mains as long
as they are connected to the AC outlets,
even if the speaker system itself has
been turned off.
To reduce the risk of fire, do not cover
the ventilation opening of the speaker
system with newspapers, tablecloths,
curtains, etc.
Do not expose the speaker system to
naked flame sources (for example,
lighted candles).
To reduce the risk of fire or electric
shock, do not expose this speaker
system to dripping or splashing, and do
not place objects filled with liquids, such
as vases, on the speaker system.
As the mains plugs of the AC power
cords and the AC power adaptor are
used to disconnect the speaker system
from the mains, connect the speaker
system to an easily accessible AC outlet.
Should you notice an abnormality in the
speaker system, disconnect the mains
plugs of the AC power cords and the AC
power adaptor from the AC outlets
immediately.
2US
Do not install the speaker system in a
confined space, such as a bookcase or
built-in cabinet.
CAUTION
Risk of explosion if the battery is
replaced by an incorrect type.
Do not expose batteries or appliances
with battery-installed to excessive heat,
such as sunshine and fire.
Do not place this product close
to medical devices.
This product (including accessories) has
magnet(s) which may interfere with
pacemakers, programmable shunt
valves for hydrocephalus treatment, or
other medical devices. Do not place this
product close to persons who use such
medical devices. Consult your doctor
before using this product if you use any
such medical device.
For the network connection of the
speaker system, establish the
connection via the router or LAN port
with the router function. If these
connections are not established, a
security problem may occur.
Indoor use only.
For the control box and the
speakers
The nameplate is located on the bottom
of the control box and the speakers.
For the AC adaptor
Labels for AC adaptor model number
and serial number are located on the
bottom of the AC adaptor.
For customers in the U.S.A.
NOTE:
This speaker system has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\020REG.fm
masterpage: Right
010COV.book Page 3 Wednesday, November 25, 2020 3:33 PM
in a residential installation. This speaker
system generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this speaker system does
cause harmful interference to radio or
television reception, which can be
determined by turning the speaker
system off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
speaker system and receiver.
– Connect the speaker system into an
outlet on a circuit different from that
to which the receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
Properly shielded and grounded cables
and connectors must be used for
connection to host computers and/or
peripherals in order to meet FCC
emission limits.
If you have any questions about this
speaker system:
Visit: https://www.sony.com/
electronics/support
Contact: Sony Customer Information
Service Center at 1-800-222-SONY (7669)
Write: Sony Customer Information
Service Center 12451 Gateway Blvd., Fort
Myers, FL 33913
Supplier’s Declaration of Conformity
Trade Name: SONY
Model No.: HT-A9
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego,
CA 92127 USA
Telephone No.: 858-942-2230
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this speaker system.
This speaker system must not be co-
located or operated in conjunction with
any other antenna or transmitter.
This speaker system complies with FCC
radiation exposure limits set forth for an
uncontrolled environment and meets
the FCC radio frequency (RF) Exposure
Guidelines. This speaker system should
be installed and operated keeping the
radiator at least 20 cm or more away
from person’s body.
Compliance with FCC requirement
15.407(c) and IC requirement RSS-247
Data transmission is always initiated by
software, which is the passed down
through the MAC, through the digital
and analog baseband, and finally to the
RF chip. Several special packets are
initiated by the MAC. These are the only
ways the digital baseband portion will
turn on the RF transmitter, which it then
turns off at the end of the packet.
Therefore, the transmitter will be on only
while one of the aforementioned
packets is being transmitted. In other
words, this device automatically
discontinue transmission in case of
either absence of information to
transmit or operational failure.
Frequency Tolerance: ±20 ppm or less
3US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\020REG.fm
masterpage: Left
010COV.book Page 4 Wednesday, November 25, 2020 3:33 PM
For customers in Canada
Properly shielded and grounded cables
and connectors must be used for
connection to host computers and/or
peripherals.
This speaker system contains license-
exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and
Economic Development Canada’s
license-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This speaker system may not cause
interference; and
(2) This speaker system must accept any
interference, including interference
that may cause undesired operation
of the speaker system.
This speaker system complies with ISED
radiation exposure limits set forth for an
uncontrolled environment and meets
RSS-102 of the ISED radio frequency (RF)
Exposure rules. This speaker system
should be installed and operated
keeping the radiator at least 20 cm or
more away from person’s body.
5.15 - 5.35 GHz band is restricted to
indoor operations only.
Data transmission is always initiated by
software, which is the passed down
through the MAC, through the digital
and analog baseband, and finally to the
RF chip. Several special packets are
initiated by the MAC.
These are the only ways the digital
baseband portion will turn on the RF
transmitter, which it then turns off at the
end of the packet. Therefore, the
transmitter will be on only while one of
the aforementioned packets is being
transmitted. In other words, this device
automatically discontinue transmission
in case of either absence of information
to transmit or operational failure.
4US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\010COVTOC.fm
masterpage: Right
010COV.book Page 5 Wednesday, November 25, 2020 3:33 PM
Table of Contents
About Manuals of the Speaker
System ......................................7
Adjusting the Volume and
Sound Quality
What’s in the Box
Startup Guide
(separate
document)
What You Can Do with the Speaker
System ..................................... 8
Guide to Parts and Controls .........10
Using the Home Menu ................. 14
Setting up
Installing the Speaker System ...... 15
Connecting to a TV ....................... 16
When Your TV Has the S-CENTER
SPEAKER IN Jack ..................... 17
Connecting an AV Device ............. 18
Connecting to the AC Outlet
(mains) ................................... 20
Performing Initial Settings ........... 21
If the Speakers Are not Connected
Correctly .................................22
Watching Images
Watching TV ................................ 24
Playing the Connected AV
Device .................................... 24
Listening to Music/Sound
Listening to Sony TV Sound with the
BLUETOOTH® Function ...........25
Listening to Music/Sound with the
BLUETOOTH Function .............27
Listening to Sound of the Connected
TV or Device Using
Headphones .......................... 29
Listening to Music by
Connecting to a Network
What You Can Do by Connecting the
Speaker System to a
Network ..................................32
Adjusting the Volume ..................34
Enjoying Immersive Surround
Experience
(IMMERSIVE AE) ......................35
Setting the Sound Effect That Is
Tailored to Sound Sources
(Sound Mode) .........................36
Making Dialogs Clearer
(VOICE) .................................... 37
Enjoying Clear Sound with Low
Volume at Midnight
(NIGHT) ................................... 37
Adjusting the Delay Between the
Picture and Sound ..................38
Enjoying Multiplex Broadcast Sound
(AUDIO) ...................................38
Adjusting the Dialog Volume While
the DTS:X Content is Played
Back ........................................39
Using the Speaker System by
Interlocking with a TV
Operating the Speaker System by
Interlocking with a TV (Control
for HDMI function) ................ 40
Operating the Speaker System by
Interlocking with a TV
Compatible with the “BRAVIA”
Sync Function ......................... 41
Changing the Settings
Changing the Brightness of the
Front Panel Display and
Indicators (DIMMER) ..............43
Saving Power in Standby
Mode ..................................... 44
Performing Easy Setup ................ 44
Performing Advanced
Settings ..................................45
Updating the Software ................ 46
5US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\010COVTOC.fm
masterpage: Left
010COV.book Page 6 Wednesday, November 25, 2020 3:33 PM
Troubleshooting
Troubleshooting .......................... 47
Resetting the Speaker System .... 55
Additional Information
Specifications ................................57
Supported Input Audio
Formats .................................. 60
On BLUETOOTH
Communication ......................61
END USER LICENSE
AGREEMENT ........................... 62
Precautions .................................. 66
Copyrights and Trademarks ........ 68
Index ............................................ 70
6US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\030MANU.fm
masterpage: Right
010COV.book Page 7 Wednesday, November 25, 2020 3:33 PM
About Manuals of the
Speaker System
The information included in each
manual is as shown below.
Startup Guide
Home Theatre System
Startup Guide
Introduces the initial procedures
concerning installation and connection
for using the speaker system, and
operations until you play music.
Operating Instructions
(this document)
Home Theatre System
Explains the basic operations.
– Connection with a TV or other devices
– Playback for music/sound of devices
connected with an HDMI cable or the
BLUETOOTH function
– Sound adjustment, etc.
Help Guide (Web manual)
For customers in Americas
https://rd1.sony.net/
help/ht/a9/h_uc/
For customers in other countries/
regions
https://rd1.sony.net/
help/ht/a9/h_zz/
Provides all operations including
advanced usage.
– Playback for music/sound with the
network function
– Details on menu items, etc.
Tips
• The instructions in these manuals
describe operations using the controls on
the remote control.
• Characters in brackets [ ] appear on the TV
screen or front panel display.
• Details are omitted from the illustrations.
What’s in the Box
Refer to Startup Guide (separate
document).
7US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\040WYD.fm
masterpage: Left
010COV.book Page 8 Wednesday, November 25, 2020 3:33 PM
What You Can Do with the Speaker System
The speaker system supports object-based audio formats such as Dolby Atmos
and DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision.
TV
Blu-ray Disc™ player, set-top
box, gaming console, etc.
• “Watching TV” (page 24)
• “Listening to Sony TV
Sound with the
BLUETOOTH® Function”
(page 25)
“Playing the Connected AV Device”
(page 24)
Headphones
“Listening to Sound of
the Connected TV or
Device Using
Headphones” (page 29)
Mobile device
Supplied speakers
“Listening to Music/Sound with the
BLUETOOTH Function” (page 27)
8US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\040WYD.fm
masterpage: Right
010COV.book Page 9 Wednesday, November 25, 2020 3:33 PM
Network
Wireless LAN
router
Internet
“What You Can Do by Connecting the Speaker System to a Network”
(page 32)
For the connecting method to the network and functions enabled
with the network connection, refer to Help Guide (Web manual).
For customers in Americas
https://rd1.sony.net/help/ht/a9/h_uc/
For customers in other countries/regions
https://rd1.sony.net/help/ht/a9/h_zz/
Optional subwoofer
For the operations of the optional
subwoofer, refer to its operating
instructions.
For the supported optional subwoofer,
confirm on the Sony website.
9US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\050PAC.fm
masterpage: Left
010COV.book Page 10 Wednesday, November 25, 2020 3:33 PM
Guide to Parts and Controls
Control Box
Front
Rear
Remote control sensor
Point the remote control at the
remote control sensor to operate
the speaker system.
Front panel display
UPDATE port (page 46)
Connect the USB memory when
updating the speaker system.
S-CENTER OUT jack (page 17)
(power) button
Turns on the speaker system or
sets it to standby mode.
LAN(100) port
HDMI OUT (TV ARC/eARC) jack
Connect a TV that has an HDMI
input jack with an HDMI cable.
The speaker system is compatible
with eARC and ARC. ARC is the
function that sends TV sound to
an AV device such as the speaker
system from the TV’s HDMI jack.
eARC is an extension of ARC and
enables transmission of the
object audio and multi-channel
LPCM content that cannot be
transmitted with ARC.
HDMI IN jack
DC IN terminal
10US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\050PAC.fm
masterpage: Right
010COV.book Page 11 Wednesday, November 25, 2020 3:33 PM
Speakers
Front
Rear
Bottom
Power indicator
Displays the connecting status
between the control box and
speaker as well as the power
condition of the speaker.
Red
– Lights up: The speaker is in
standby mode.
Green
– Lights up: The speaker is
connected to the control box.
– Flashes slowly: The speaker is
attempting to connect to the
control box.
– Flashes twice repeatedly: The
speaker is in the pairing standby
status via manual connection.
Turns off
– The speaker is turned off.
(power) button
Turns on/off the speaker.
LINK button (page 22)
AC inlet
Wall mounting hole
Mounting hole for the general
speaker stand
Note
When using the wall mounting hole () or
mounting hole for the general speaker
stand (), peel off the cover on them with
a safety-pin, etc. (page 15).
11US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\050PAC.fm
masterpage: Left
010COV.book Page 12 Wednesday, November 25, 2020 3:33 PM
Remote Control
(power)
Turns on the speaker system or
sets it to standby mode.
(MUSIC SERVICE) button
If you have previously played
music on Spotify on the speaker
system, you can resume playback
by pressing this button.
This button may not be available
in some countries/regions.
BLUETOOTH (page 28)
TV (page 24)
HDMI (page 24)
AUTO SOUND (page 36)
VOICE (page 37)
NIGHT (page 37)
CINEMA (page 36)
MUSIC (page 36)
STANDARD (page 36)
IMMERSIVE AE (page 35)
DIMMER (page 43)
DISPLAY
Displays playback information on
the TV screen.
Playback information is displayed
in the front panel display for TV
input.
/// (page 14)
(enter) (page 14)
BACK (page 14)
OPTIONS (page 39)
Displays the options menu on the
TV screen.
The options menu is displayed in
the front panel display for TV
input.
HOME (page 14)
HT-A9
5-025-229-11(1)
12US
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\050PAC.fm
masterpage: Right
010COV.book Page 13 Wednesday, November 25, 2020 3:33 PM
About the replacement of
batteries for the remote control
When the speaker system does not
respond by operating with the remote
control, replace two batteries with new
batteries.
Use R03 (size AAA) manganese batteries
for replacement.
REAR (rear speakers volume)
+/–
Adjusts the volume of the rear
speakers.
(volume) +*/–
Adjusts the volume.
BASS (bass sound volume) +/–
Adjusts the volume of the bass
sound or optional subwoofer
when connecting it.
(muting)
Turns off the sound temporarily.
TV/AUDIO SYSTEM
Switches the output for the
connected TV sound between the
TV and speaker system.
Note
This button works in the following
conditions.
– The connected TV is compatible with
the System Audio Control function.
– The Control for HDMI function of the
speaker system is set to on
(page 40).
Playback operation buttons
/ (previous/next)
Selects the previous/next track or
file.
Pressing and holding it searches
backward or forward (rewind/fast
forward) during playback.
(play/pause)*
Starts, pauses, or re-starts
playback (resume play).
AUDIO* (page 38)
* The AUDIO, (play/pause), and
(volume) + buttons have a tactile dot. Use
it as a guide during operation.
13US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\050PAC.fm
masterpage: Left
010COV.book Page 14 Wednesday, November 25, 2020 3:33 PM
Using the Home Menu
You can display the home menu on the
TV screen by connecting the speaker
system and TV with an HDMI cable.
3 Press /// to select the item
that you want, then press
(enter).
The selected input or setting
display appears on the TV screen.
To return to the previous screen,
press BACK.
///,
(enter)
HOME
BACK
1 Press HOME.
The home menu appears on the
TV screen.
2 Press // to select the category
that you want, then press or
(enter).
The items for the selected
category appear under the
category list on the TV screen.
Category
Explanation
[Watch]
[Listen]
[Setup]
Selects the input of the
TV or AV device that is
connected to the
speaker system.
Selects the input of the
audio device that is
connected to the
speaker system or
music service for
playing back on the
speaker system.
Performs the basic
initial settings by using
[Easy Setup] or various
advanced settings of
the speaker system.
14US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm
masterpage: Right
010COV.book Page 15 Wednesday, November 25, 2020 3:33 PM
Setting up
Installing the Speaker
System
Installing the Control Box
and Speakers
For the installation, refer to Startup
Guide (separate document).
1 Prepare screws (not supplied) that
are suitable for the wall mounting
hole on the rear of the speaker.
4 mm (5/32 in)
More than 30 mm (1 3/16 in)
4.2 mm
(11/64 in)
9.6 mm
(3/8 in)
Mounting the Speakers on a
Wall
Hole on the rear of the speaker
2 Fasten the screw in the wall.
Speakers
3 Peel off the cover on the rear of the
speaker with a safety-pin, etc.
Approx.
7.35 mm
(approx.
19/64 in)
Cover
Notes
• Prepare screws (not supplied) that are
suitable for the wall material and stability.
Depending on the wall material, the wall
may be damaged.
• Fasten the screws securely in the wall
• Hang the speakers horizontally on the
beam.
reinforced wall.
• Have the installation done by a Sony
dealer or licensed contractor and pay
special attention to safety during the
installation.
• Sony shall not be held responsible for
accidents or damage caused by improper
installation, insufficient wall stability,
improper screw installation, natural
disasters, etc.
15US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm
masterpage: Left
010COV.book Page 16 Wednesday, November 25, 2020 3:33 PM
4 Hang the speakers by confirming
the type of the speakers.
Check the label on the bottom of the
speaker.
• “FL”: Front left
• “FR”: Front right
• “RL”: Rear left
• “RR”: Rear right.
Connecting to a TV
Connecting a TV Compatible
with ARC/eARC
1 Connect the HDMI IN jack
compatible with ARC/eARC on the
TV and HDMI OUT (TV ARC/eARC)
jack on the speaker system with
the HDMI cable (supplied).
Note
Keep the cover that is peeled off in step 3
for use when you do not mount the speaker
on a wall.
Installing the Optional
Speakers
Refer to the operating instructions of the
optional speakers.
HDMI cable
(supplied)
TV
Note
Make sure that the connectors are firmly
inserted.
16US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm
masterpage: Right
010COV.book Page 17 Wednesday, November 25, 2020 3:33 PM
Note
Make sure that the connectors are firmly
inserted.
Tip
If the length of the TV center speaker mode
cable is not sufficient, use a commercially
available stereo mini cable.
When Your TV Has the S-
CENTER SPEAKER IN Jack
You can output the center part of the
speaker system sound from the TV by
connecting the TV with the following
method.
1 Connect the speaker system and
TV with the HDMI cable (supplied)
(page 16).
2 Connect the S-CENTER SPEAKER IN
jack on the TV and the S-CENTER
OUT jack on the speaker system
with the TV center speaker mode
cable (supplied).
TV center speaker
mode cable
(supplied)
TV
17US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm
masterpage: Left
010COV.book Page 18 Wednesday, November 25, 2020 3:33 PM
Connecting an AV Device
Connecting an AV Device
Compatible with the 2K/4K
Video Format
You can output sound such as Dolby
Atmos, Dolby TrueHD, and DTS:X in high
quality by connecting an AV device to
the speaker system.
1 Connect the HDMI OUT jack on the
AV device and HDMI IN jack on the
speaker system with an HDMI
cable (not supplied).
HDMI cable
(not supplied)
Blu-ray Disc player, set-top
box, gaming console, etc.
Make sure that the connectors are firmly
inserted.
Note
18US
Tips
• If a TV is compatible with eARC, you can
also output the high quality sound by
connecting an AV device to the HDMI IN
jack on the TV. In this case, enable the
eARC function of the TV.
• Select the appropriate HDMI cable and
[HDMI Signal Format] setting according to
the video formats output from the device
connected to the speaker system. For
details, refer to Help Guide.
Connecting an AV Device
Compatible with the 8K
Video Format
When you connect an AV device with the
following methods, you can play 8K
video and high quality sound such as
Dolby Atmos, Dolby TrueHD, or DTS:X.
1 Connect the speaker system and
TV with the HDMI cable (supplied)
(page 16).
2 Check that the eARC compatible
HDMI IN jack on the TV is
compatible with the 8K video
input.
Refer to the operating instructions
of the TV.
3 Connect an AV device with one of
the following methods.
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm
masterpage: Right
010COV.book Page 19 Wednesday, November 25, 2020 3:33 PM
When the eARC compatible
HDMI IN jack on the TV supports
the 8K video input:
Connect the HDMI IN jack on the
speaker system and HDMI OUT jack
on an AV device with an HDMI cable
(not supplied).
TV
When the eARC compatible
HDMI IN jack on the TV does not
support the 8K video input:
Connect the HDMI OUT jack on an
AV device to the HDMI IN jack
compatible with the 8K video input
on a TV with an HDMI cable (not
supplied).
Make sure that the eARC function of
the TV is on.
Compatible with
8K video input
TV
Compatible with
8K video input
HDMI cable
(not supplied)
Blu-ray Disc player, set-top
box, gaming console, etc.
HDMI cable
(not supplied)
Blu-ray Disc player, set-top
box, gaming console, etc.
Note
Make sure that the connectors are firmly
inserted.
Tip
Select the appropriate HDMI cable and
[HDMI Signal Format] setting according to
the video formats output from the device
connected to the speaker system. For
details, refer to Help Guide.
19US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm
masterpage: Left
010COV.book Page 20 Wednesday, November 25, 2020 3:33 PM
2 Connect the AC power cords
(mains leads) (supplied) to the AC
inlets on four speakers, then
connect to the AC outlets (mains).
Connecting to the AC
Outlet (mains)
1 Connect the AC adaptor (supplied)
and AC power cord (mains lead)
(supplied)* to the DC IN terminal of
the control box, then connect to
the AC outlet (mains).
*Except for North American models
For North American models
AC power cord (mains lead)
(supplied)
AC adaptor
(supplied)
For other models
AC adaptor
(supplied)
AC power cord
(mains lead)
(supplied)
20US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm
masterpage: Right
010COV.book Page 21 Wednesday, November 25, 2020 3:33 PM
Performing Initial
Settings
1 Press (power) on the remote
control supplied with the speaker
system to turn on the speaker
system.
Operate the remote control by
pointing it toward the front of the
control box.
When the speaker system turns on,
[SETUP] appears in the front panel
display.
(power)
3 Check that the connection
between the control box and four
speakers is completed on the TV
screen.
The control box and speakers are
connected automatically.
The sound for connection
completion is output after the check
marks appear on all the speakers.
[
Speaker connection check]
Speaker connection check
Speaker connection successful.
Next
PLEASE WAIT
SETUP
2 Turn on the TV.
If the speaker setting screen does
not appear on the TV screen, change
the TV input setting to the input that
the speaker system is connected.
4 Perform initial settings by
following the on-screen
instructions.
[
Language]
Language
Select your language.
English
Français (France)
Français (Canada)
Español
Deutsch
[
Sound Field Optimization]
Sound Field Optimization
Optimize the surround sound for your environment.
Optimization takes about a minute. A loud sound
may come from your speakers during optimization.
Do not make loud noises, walk or stand in front of
the speakers during optimization.
Start
Later
[
Easy Network Setup - Start]
Easy Network Setup - Start
Connect this unit to the Internet to:
- Use your mobile device to play streaming music on the unit.
- Install software updates to keep the latest functions available.
You can do this later from [Easy Setup] > [Easy Network Setup].
Next
Later
21US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm
masterpage: Left
010COV.book Page 22 Wednesday, November 25, 2020 3:33 PM
Notes
• Depending on the order in which you turn
on the TV and the speaker system, the
speaker system may be muted and
[MUTING] is displayed on the front panel
display of the speaker system. If this
happens, turn all devices off, then turn on
the speaker system after turning on the
TV.
• During [Sound Field Optimization], a
measuring sound is output for about 1
minute.
• The speaker system does not output
sound until completing the wireless
connection between the control box and
four speakers.
• If the control box and speakers are not
connected automatically in step 3, reset
the speakers (page 56).
If the Speakers Are not
Connected Correctly
The speakers are connected to the
control box automatically when they are
turned on.
If you use multiple speaker systems and
want to specify the control box that is
connected wirelessly to the speakers,
perform the manual connection by
following the steps below.
Power indicator
LINK
1 Press HOME.
The home menu appears on the TV
screen.
2 Select
[Setup] - [Advanced
Settings] on the home menu.
3 Select [Speaker Settings] -
[Wireless Speaker Settings] - [Start
manual linking].
The [Start manual linking] screen
appears on the TV screen.
HT-A9
5-025-229-11(1)
22US
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\070CON.fm
masterpage: Right
010COV.book Page 23 Wednesday, November 25, 2020 3:33 PM
4 Press LINK on all the speakers.
The power indicators of the
speakers flash twice repeatedly in
green.
5 Select [Start].
The manual connection starts.
The connecting process appears on
the TV screen.
To cancel the manual connection,
select [Cancel].
6 When all the speakers display
[Connected], select [Finish].
7 Press
(enter).
The manual connection is
established and the power
indicators of the speakers light in
green.
Notes
• If you perform [Start manual linking],
[Setup] - [Advanced Settings] -
[Speaker Settings] - [Wireless Speaker
Settings] - [Link mode] is set to [Manual]
automatically.
• Only the speakers for which [Connected]
has been displayed in Step 6 connect to
the control box. If the connection of the
speakers cannot be established, perform
the operation again from Step 1.
23US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\080WAT.fm
masterpage: Left
010COV.book Page 24 Wednesday, November 25, 2020 3:33 PM
Watching Images
Watching TV
1 Press HOME.
The home menu appears on the TV
screen.
2 Select
[Watch] - [TV] on the
home menu.
3 Select the program using the TV
remote control.
The selected TV program appears
on the TV screen and the TV sound is
output from the speaker system.
4 Adjust the volume (page 34).
Tip
You can select [TV] directly by pressing TV
on the remote control.
Playing the Connected AV
Device
1 Press HOME.
The home menu appears on the TV
screen.
2 Select
[Watch] - [HDMI] on the
home menu.
The image of the selected device
appears on the TV screen and the
sound is output from the speaker
system.
3 Adjust the volume (page 34).
Tip
You can select [HDMI] directly by pressing
HDMI on the remote control.
24US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm
masterpage: Right
010COV.book Page 25 Wednesday, November 25, 2020 3:33 PM
Listening to Music/Sound
Listening to Sony TV
Sound with the
BLUETOOTH® Function
What You Can Do by
Connecting a TV with the
BLUETOOTH Function
When using Sony TV* with the
BLUETOOTH function, you can listen to
sound of the TV or device that is
connected to the TV by connecting the
speaker system and TV wirelessly.
* The TV needs to be compatible with A2DP
(Advanced Audio Distribution Profile) of
the BLUETOOTH profile.
Sony TV
Blu-ray Disc player,
set-top box, gaming
console, etc.
Note
If connecting the speaker system and TV by
using the BLUETOOTH function, you cannot
display the operation screen for the
speaker system such as the home menu on
the TV screen, and use functions of the
speaker system other than the listening
function for the sound of the TV or device
that is connected to the TV.
To use all the functions of the speaker
system, connect the speaker system and TV
with the HDMI cable (supplied) (page 16).
Listening to TV Sound by
Connecting the Speaker
System and TV Wirelessly
You need to perform pairing of the
speaker system and TV by using the
BLUETOOTH function.
Pairing is the process required to
mutually register the information on
BLUETOOTH devices to be connected
wirelessly in advance.
(power)
BLUETOOTH
TV
AUDIO
1 Turn on the TV.
2 Press (power) to turn on the
speaker system.
3 Press TV, AUDIO, then BLUETOOTH
on the remote control in sequence.
4 Make sure that [PAIRING] appears
in the front panel display.
The speaker system enters the
BLUETOOTH pairing mode.
PAIRING
25US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm
masterpage: Left
010COV.book Page 26 Wednesday, November 25, 2020 3:33 PM
5 On the TV, search the speaker
system by performing the pairing
operation.
The list of the BLUETOOTH devices
that are detected appears on the TV
screen.
For the operation method to pair the
BLUETOOTH device to the TV, refer
to the operating instructions of the
TV.
6 Pair the speaker system and TV by
selecting “HT-A9” from the list on
the TV screen.
7 Make sure that [TV (BT)] appears in
the front panel display.
A connection between the speaker
system and TV has been
established.
8 Select the program or input of the
device by using the TV remote
control.
The sound of the displayed image
on the TV screen is output from the
speaker system.
9 Adjust the volume of the speaker
system by using the TV remote
control.
When pressing the muting button
on the TV remote control, the sound
is muted temporarily.
Notes
• If the TV sound is not output from the
speaker system, press TV and check the
status of the front panel display.
– [TV (BT)] appears in the front panel
display: The speaker system and TV are
connected, and TV sound is output from
the speaker system.
– [PAIRING] appears in the front panel
display: Perform pairing on the TV.
– [TV] appears in the front panel display:
Perform steps from the start.
• When you connect the speaker system
and TV with an HDMI cable, the
BLUETOOTH connection is canceled. To
connect the speaker system and TV with
26US
the BLUETOOTH function again,
disconnect the HDMI cable, then perform
the connecting operation from the start.
Listening to Sound of the
Paired TV
1 Turn on the TV with the TV remote
control.
The speaker system is turned on by
interlocking with the TV power and
TV sound is output from the speaker
system.
2 Select the program or input of the
device by using the TV remote
control.
The sound of the displayed image
on the TV screen is output from the
speaker system.
3 Adjust the volume of the speaker
system by using the TV remote
control.
When pressing the muting button
on the TV remote control, the sound
is muted temporarily.
Tip
When the TV is turned off, the speaker
system is also turned off by interlocking
with the TV power.
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm
masterpage: Right
010COV.book Page 27 Wednesday, November 25, 2020 3:33 PM
About operations with the remote
control that is supplied with the
speaker system
You can use the following buttons.
(power)
AUTO SOUND,
VOICE,
NIGHT,
CINEMA,
MUSIC,
STANDARD,
IMMERSIVE AE
(volume) +/–
BASS +/–
(muting)
REAR (rear
speakers volume)
+/–
Notes
• If you select the input other than TV on the
remote control supplied with the speaker
system, the TV sound is not output from
the speaker system. To output the TV
sound, press TV on the remote control to
change to the TV input.
• While the TV is connected with the
BLUETOOTH function, the following
remote control buttons do not work.
///,
DISPLAY, (play/pause), /
(previous/next)
(When operating the option menu, //
/ and
(enter), BACK, HOME,
(enter) can be used.)
Listening to Music/Sound
with the BLUETOOTH
Function
Listening to Music by Pairing
the Mobile Device That Is
Connected for the First Time
To use the BLUETOOTH function, you
need to perform pairing of the speaker
system and mobile device in advance.
1 Press and hold the BLUETOOTH
button for 2 seconds.
BLUETOOTH
(volume) +/–
BASS +/–
REAR (rear
speakers volume)
+/–
(play/
pause), /
(previous/next)
27US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm
masterpage: Left
010COV.book Page 28 Wednesday, November 25, 2020 3:33 PM
2 Make sure that [PAIRING] appears
in the front panel display.
The speaker system enters the
pairing mode.
system goes into pairing mode simply by
changing the input to the BLUETOOTH
input.
• Perform pairing for the second and
subsequent mobile devices.
PAIRING
Listening to Music from the
Paired Device
3 On the mobile device, search the
speaker system by performing the
pairing operation.
The list of the BLUETOOTH devices
that are detected appears on the
screen of the mobile device.
For the operation method to pair the
BLUETOOTH device to the mobile
device, refer to the operating
instructions of the mobile device.
4 Pair the speaker system and
mobile device by selecting “HT-
A9” from the list on the screen of
the mobile device.
If a passkey is requested, enter
“0000.”
5 Make sure that [BT] appears in the
front panel display.
A connection between the speaker
system and mobile device has been
established.
6 Start audio playback with the
music app on the connected
mobile device.
Sound is output from the speaker
system.
7 Adjust the volume (page 34).
You can play or pause the content
by using the playback operation
buttons on the remote control.
Tips
• If there is no mobile device that has been
paired (ex. immediately after the purchase
of the speaker system), the speaker
28US
BLUETOOTH
(volume) +/–
BASS +/–
REAR (rear
speakers volume)
+/–
(play/
pause), /
(previous/next)
1 Turn the BLUETOOTH function of
the mobile device to on.
2 Press the BLUETOOTH button.
The speaker system automatically
reconnects to the mobile device it
was most recently connected to.
3 Make sure that [BT] appears in the
front panel display.
A connection between the speaker
system and mobile device has been
established.
4 Start audio playback with the
music app on the connected
mobile device.
Sound is output from the speaker
system.
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm
masterpage: Right
010COV.book Page 29 Wednesday, November 25, 2020 3:33 PM
5 Adjust the volume (page 34).
You can play or pause the content
by using the playback operation
buttons on the remote control.
Note
[Setup] - [Advanced
If sound delay occurs, it may be improved
by setting
Settings] - [Bluetooth Settings] - [Bluetooth
Connection Quality] to [Priority on Stable
Connection].
Tip
When the connection is not established,
select “HT-A9” on the mobile device.
To disconnect the mobile device
Perform any of the following items.
• Disable the BLUETOOTH function on
the mobile device.
• Press the BLUETOOTH button while the
[Bluetooth Audio] screen appears on
the TV screen.
• Set
[Setup] - [Advanced Settings] -
[Bluetooth Settings] - [Bluetooth
Mode] to [Transmitter] or [Off].
• Turn off the speaker system or mobile
device.
Listening to Sound of the
Connected TV or Device
Using Headphones
Listening to Sound by Pairing
with Headphones
1 Set the BLUETOOTH compatible
headphones to pairing mode.
Refer to the operating instructions
of the headphones for the pairing
method.
2 Press HOME.
The home menu appears on the TV
screen.
3 Select
[Setup] - [Advanced
Settings] on the home menu.
4 Select [Bluetooth Settings] -
[Bluetooth Mode] - [Transmitter].
The speaker system enters
BLUETOOTH transmission mode.
5 Select the name of the
headphones from the [Device List]
in [Bluetooth Settings].
When the BLUETOOTH connection is
established, [Connected] appears.
If you cannot find the name of your
headphones in [Device List], select
[Scan].
6 Return to the home menu, select
[Listen], and
[Watch] or
select the input.
The image of the selected input
appears on the TV screen, [BT TX]
appears in the front panel display,
then the sound is output from the
headphones.
Sound from the speaker system is
muted at the same time.
29US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm
masterpage: Left
010COV.book Page 30 Wednesday, November 25, 2020 3:33 PM
7 Adjust the volume.
Adjust the volume level of the
headphones first. Then, adjust the
volume level of the headphones
with (volume) +/– on the remote
control.
To remove the paired
headphones from the device list
1 Press HOME.
The home menu appears on the TV
screen.
2 Select
[Setup] - [Advanced
Settings] on the home menu.
3 Select [Bluetooth Settings] - [Device
List].
4 Move the cursor to the name of the
headphones that you want to remove,
and then press DISPLAY.
To remove all the paired headphones
from the device list, press AUDIO.
5 Follow the on-screen instructions to
remove the desired headphones from
the device list.
Note
To display the paired headphones on the
device list, Set
Settings] - [Bluetooth Settings] - [Bluetooth
Mode] to [Transmitter].
[Setup] - [Advanced
Listening to Sound with
Paired Headphones
1 Set the BLUETOOTH function of the
headphones to on.
2 Press HOME.
The home menu appears on the TV
screen.
3 Select
[Setup] - [Advanced
Settings] on the home menu.
4 Select [Bluetooth Settings] -
[Bluetooth Mode] - [Transmitter].
The speaker system enters
BLUETOOTH transmission mode and
the speaker system automatically
reconnects to the headphones that
was most recently connected to.
5 Return to the home menu, select
[Listen], and
[Watch] or
select the input.
The image of the selected input
appears on the TV screen, [BT TX]
appears in the front panel display,
then the sound is output from the
headphones.
Sound from the speaker system is
muted at the same time.
6 Adjust the volume.
Adjust the volume level of the
headphones first. Then, adjust the
volume level of the headphones
with (volume) +/– on the remote
control.
30US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\090LST.fm
masterpage: Right
010COV.book Page 31 Wednesday, November 25, 2020 3:33 PM
To disconnect the paired
headphones
Perform any of the following items.
– Disable the BLUETOOTH function on
the headphones.
– Set
[Setup] - [Advanced Settings] -
[Bluetooth Settings] - [Bluetooth
Mode] to [Receiver] or [Off].
– Turn off the speaker system or
headphones.
– Select the device name of the
connected headphones from
[Setup] - [Advanced Settings] -
[Bluetooth Settings] - [Device List].
[Connected] of the device name
disappears.
About the Connection of the
Headphones
• You may not be able to adjust the
volume level depending on the
BLUETOOTH compatible headphones.
• Input of BLUETOOTH is disabled when
[Setup] - [Advanced Settings] -
[Bluetooth Settings] - [Bluetooth
Mode] is set to [Off] or [Transmitter].
• You can register up to 9 BLUETOOTH
devices. If a 10th BLUETOOTH device is
registered, the oldest connected
BLUETOOTH device will be overwritten
by the new one.
• The speaker system can display up to
15 detected BLUETOOTH devices in the
[Device List] (page 30).
• You cannot change the sound effect or
settings while transmitting sound to
the BLUETOOTH compatible
headphones.
• Playback of audio/music on the
BLUETOOTH device is delayed
compared to that on the speaker
system due to the characteristics of
BLUETOOTH wireless technology.
• You can enable or disable the
reception of LDAC audio from the
BLUETOOTH device in [Bluetooth
Settings].
31US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\100NET.fm
masterpage: Left
010COV.book Page 32 Wednesday, November 25, 2020 3:33 PM
Listening to Music by Connecting to a Network
What You Can Do by Connecting the Speaker System to
a Network
You can perform streaming playback of music content via the speaker system by
operating a smartphone, tablet, or iOS device, or play music stored on a computer via
the speaker system by connecting to the network.
For details of functions and operations, refer to Help Guide.
iOS device/smartphone/
tablet
• 360 Reality Audio
• Spotify
• Chromecast built-in
• AirPlay
• Sony | Music Center
Computer
• AirPlay
• Home Network
Speaker system
360 Reality Audio
You can play 360 Reality Audio contents
on the speaker system by selecting it on
the streaming service app compatible
with 360 Reality Audio.
Spotify
You can select music on the Spotify app
and play it on the speaker system.
Use your phone, tablet, or computer as a
remote control for Spotify.
Go to spotify.com/connect to learn how.
Chromecast built-in
You can select music on the
Chromecast-enabled app and play it on
the speaker system.
AirPlay
The speaker system supports AirPlay.
You can play music on the speaker
system by operating an iOS device or a
computer.
32US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\100NET.fm
masterpage: Right
010COV.book Page 33 Wednesday, November 25, 2020 3:33 PM
Sony | Music Center
You can control the speaker system
wirelessly by installing the “Sony | Music
Center” app on your smartphone or
tablet device.
Home Network
You can play music files stored on your
computer on a network location via your
home network.
33US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm
masterpage: Left
010COV.book Page 34 Wednesday, November 25, 2020 3:33 PM
Adjusting the Volume and Sound
Quality
Adjusting the Volume
created from the 2-channel sound using
virtual processing. When the input source
does not contain much surround sound,
the surround sound from the rear speakers
may be difficult to hear.
(volume) +/–
BASS +/–
REAR (rear
speakers volume)
+/–
To adjust the speaker system
volume
Press (volume) +/–.
The volume level appears in the front
panel display.
To adjust the bass sound volume
Press BASS (bass sound volume) +/–.
The volume level appears in the front
panel display.
Note
The subwoofer is designed for playback of
bass or low frequency sound. When the
input source, such as in TV programs, does
not contain much bass sound, the bass
sound from the subwoofer may be difficult
to hear.
To adjust the rear speaker volume
Press REAR (rear speakers volume)
+/–.
The volume level appears in the front
panel display.
The rear speakers are designed for
playback of the surround part of the multi-
channel sound and surround sound that is
Note
34US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm
masterpage: Right
010COV.book Page 35 Wednesday, November 25, 2020 3:33 PM
• The Immersive Audio Enhancement
setting does not appear on the TV screen
while the TV input is selected. In this case,
you can check the Immersive Audio
Enhancement setting in the front panel
display.
• Depending on the source, this setting is
fixed and cannot be changed.
Enjoying Immersive
Surround Experience
(IMMERSIVE AE)
You can feel immersed by the sound
from not only the horizontal direction,
but also from the upward direction by
working sound modes effectively
(page 36). This function also works for
the 2.0 channel signal such as TV
programs.
IMMERSIVE AE
1 Press IMMERSIVE AE to set the
function on or off.
The Immersive Audio Enhancement
setting appears on the TV screen.
Mode
Explanation
[Immersive
Audio
Enhancement:
On]
Activates the
Immersive Audio
Enhancement
function.
[Immersive
Audio
Enhancement:
Off]
Deactivates the
Immersive Audio
Enhancement
function.
Notes
• The Immersive Audio Enhancement
function is available only when
[Setup] - [Advanced Settings] -
[Audio Settings] - [Sound Effect] is set to
[Sound Mode On].
• The surround effect from all directions
differs depending on the sound source.
35US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm
masterpage: Left
010COV.book Page 36 Wednesday, November 25, 2020 3:33 PM
Setting the Sound Effect
That Is Tailored to Sound
Sources (Sound Mode)
You can easily enjoy pre-programmed
sound effects that are tailored to
different kinds of sound sources.
[Setup] -
This function works when
[Advanced Settings] - [Audio Settings] -
[Sound Effect] is set to [Sound Mode On].
AUTO SOUND
MUSIC
STANDARD
CINEMA
1 Press AUTO SOUND, CINEMA,
MUSIC, or STANDARD to select the
sound mode.
The selected sound mode appears
on the TV screen.
Sound mode
Explanation
[Auto Sound]
[Cinema]
The appropriate
sound setting is
automatically
selected for the
sound source.
You feel immersed by
the sound that travels
behind you and
surrounds your entire
body. This mode is
suitable for watching
movies.
36US
Sound mode
Explanation
[Music]
Vividness and
glossiness of the
sound are expressed
in detail. This mode is
suitable for enjoying
music in a way that
moves you.
The sound of a TV
program can be
heard clearly.
[Standard
Surround]
Notes
• The sound mode function is disabled in
the following conditions.
– Chromecast built-in is used.
– AirPlay is used.
– The BLUETOOTH device is connected in
BLUETOOTH transmission mode
(page 29).
– A test tone is emitted.
• The sound mode does not appear on the
TV screen while the TV input is selected. In
this case, you can check the sound mode
in the front panel display.
• Depending on the combination of the
sound mode setting and sound source,
the effect of [Sound Field Optimization]
may not be applied.
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm
masterpage: Right
010COV.book Page 37 Wednesday, November 25, 2020 3:33 PM
Making Dialogs Clearer
(VOICE)
Enjoying Clear Sound
with Low Volume at
Midnight (NIGHT)
VOICE
NIGHT
1 Press VOICE to set the function on
or off.
The voice mode setting appears on
the TV screen.
Mode
Explanation
[Voice: On]
[Voice: Off]
Dialog is easily heard by
enhancing dialog
range.
Deactivates the voice
mode function.
Notes
• The voice mode setting does not appear
on the TV screen while the TV input is
selected. In this case, you can check the
voice mode setting in the front panel
display.
• When the BLUETOOTH device is
connected in BLUETOOTH transmission
mode (page 29), the voice mode is
disabled.
1 Press NIGHT to set the function on
or off.
The night mode setting appears on
the TV screen.
Mode
Explanation
[Night: On]
Sound is output at low
volume with minimum
loss of fidelity and
clarity of dialog.
Deactivates the night
mode function.
[Night: Off]
Notes
• When you turn the speaker system off,
this setting is set to [Night: Off]
automatically.
• The night mode setting does not appear
on the TV screen while the TV input is
selected. In this case, you can check the
night mode setting in the front panel
display.
• When the BLUETOOTH device is
connected in BLUETOOTH transmission
mode (page 29), the night mode is
disabled.
37US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm
masterpage: Left
010COV.book Page 38 Wednesday, November 25, 2020 3:33 PM
Adjusting the Delay
Between the Picture and
Sound
When the sound does not match the
pictures on the TV screen, you can adjust
the delay between the picture and
sound.
The setting method differs depending
on the input.
For details, refer to Help Guide.
Enjoying Multiplex
Broadcast Sound (AUDIO)
You can enjoy multiplex broadcast
sound when the speaker system
receives a Dolby Digital multiplex
broadcast signal.
AUDIO
1 Press AUDIO repeatedly to select
the desired audio signal.
The audio signal appears on the TV
screen.
Audio signal
Explanation
[Audio:
Main]
[Audio: Sub]
[Audio:
Main/Sub]
Sound of the main
language is output.
Sound of the sub
language is output.
Main sound is output
from the left speaker
and sub sound is
output from the right
speaker.
Notes
• To output Dolby Digital sound, you need
to connect a TV that is compatible with
eARC or ARC (page 16) to the HDMI OUT
(TV ARC/eARC) jack with the HDMI cable
(supplied), or other devices to the HDMI IN
jack with an HDMI cable (not supplied).
• The audio signal does not appear on the
TV screen while the TV input is selected. In
this case, you can check the audio signal
in the front panel display.
HT-A9
5-025-229-11(1)
38US
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\110SOU.fm
masterpage: Right
010COV.book Page 39 Wednesday, November 25, 2020 3:33 PM
Adjusting the Dialog
Volume While the DTS:X
Content is Played Back
By adjusting the dialog volume, you can
easily listen to dialog since it stands out
from the ambient noise. This function
works while playing content that is
compatible with the DTS:X dialog
control function.
The setting method differs depending
on the input.
When Playing Content on an
AV Device
1 Press OPTIONS.
The options menu appears on the
TV screen.
2 Select [DTS Dialog Control].
3 Adjust the dialog volume using /
(enter).
, then press
You can adjust from 0.0 dB to 6.0 dB
in 1.0 dB increments.
///,
(enter)
OPTIONS
When Watching the TV
1 Press OPTIONS, display [DIALOG]
in the front panel display using /
, then press
(enter).
2 Adjust the dialog volume using /
, then press
You can adjust from 0.0 dB to 6.0 dB
in 1.0 dB increments.
(enter).
3 Press OPTIONS.
The options menu in the front panel
display turns off.
39US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\120HDM.fm
masterpage: Left
010COV.book Page 40 Wednesday, November 25, 2020 3:33 PM
Using the Speaker System by
Interlocking with a TV
Operating the Speaker
System by Interlocking
with a TV (Control for
HDMI function)
Connecting a TV compatible with the
Control for HDMI function using an HDMI
cable enables you to interlock the
speaker system operation such as power
on/off or volume adjustment with a TV.
About the Control for HDMI
function
The Control for HDMI function is a
function that enables operation of
devices connected with an HDMI (High-
Definition Multimedia Interface) cable by
interlocking them.
Although this function works for devices
compatible with the Control for HDMI
function, it may not work if connecting
devices other than those manufactured
by Sony.
Preparing to Operate by
Interlocking with a TV
Enable the Control for HDMI function
settings of the TV connected to the
speaker system with an HDMI cable.
The default setting of the Control for
HDMI function of the speaker system is
[On].
Tips
• When connecting a device such as a Blu-
ray Disc player to a TV with an HDMI cable,
enable its Control for HDMI function.
• To enable the Control for HDMI function of
a TV or Blu-ray Disc player, refer to their
operating instructions.
40US
• If you enable the Control for HDMI
(“BRAVIA” sync) function when using a TV
manufactured by Sony, the Control for
HDMI function of the speaker system is
also enabled automatically. When the
setting is complete, [DONE] appears in the
front panel display.
Performing Power Operation
or Volume Adjustment by a
TV Remote Control
When turning the TV on/off or adjusting
the volume using the TV remote control,
the speaker system power operation or
volume adjustment is interlocked.
TV remote control
Power interlocking
When you turn on or off the TV, the
speaker system will turn on or off
automatically.
Note
If you turn off the speaker system before
turning off the TV, the speaker system may
not turn on automatically even though you
turn on the TV next time. In this case,
perform the following operation.
– Select the speaker system for the sound
output device in the TV menu.
– When using Sony TV, turn on the
speaker system while the TV is turned
on.
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\120HDM.fm
masterpage: Right
010COV.book Page 41 Wednesday, November 25, 2020 3:33 PM
Volume adjustment
The sound of the TV you are watching is
output from the speaker system
automatically. You can adjust the
speaker system volume by the TV
remote control.
Other Interlocking Functions
Menu Operation by TV Remote
Control
You can operate the menu of the
speaker system by selecting the name of
the speaker system when changing
input or operating the Sync Menu on the
TV.
Note
Some Sony TVs support the Sync Menu.
Refer to the operating instructions of your
TV to see if your TV supports the Sync
Menu.
Language Follow
When you change the language for the
on-screen display of the TV, the speaker
system’s on-screen display language is
also changed.
One-Touch Play Function
When you play content on a Blu-ray Disc
player or “PlayStation®4,” etc. connected
to the TV, the speaker system and TV are
turned on automatically.
Tip
You can change the Control for HDMI
settings by selecting
[Advanced Settings] - [HDMI Settings] on
the Home menu.
[Setup] -
Operating the Speaker
System by Interlocking
with a TV Compatible with
the “BRAVIA” Sync
Function
“BRAVIA” Sync is an extended function
developed by Sony based on the Control
for HDMI function. By connecting
“BRAVIA” Sync-compatible devices such
as a TV or a Blu-ray Disc player using an
HDMI cable, you can control the devices
by interlocking them with each other.
To use “BRAVIA” Sync
“BRAVIA” Sync is enabled by enabling
the Control for HDMI function of the
Sony device. For the operation to enable
the Control for HDMI function, see
“Preparing to Operate by Interlocking
with a TV” (page 40).
What You Can Do with
“BRAVIA” Sync
Control for HDMI function
• Power interlocking (page 40)
• Volume adjustment (page 41)
• Menu Operation by TV Remote Control
(page 41)
• Language Follow (page 41)
• One-Touch Play Function (page 41)
Sound mode/Scene Select
Function
The sound mode of the speaker system
is automatically switched according to
the setting of the TV’s Scene Select
function or sound mode. To use this
function, you need to set the sound
mode to [Auto Sound] (page 36).
41US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\120HDM.fm
masterpage: Left
010COV.book Page 42 Wednesday, November 25, 2020 3:33 PM
Home Theatre Control
Function
Setting the speaker system, setting the
sound mode settings, input switching,
etc. can be done without switching the
TV input.
42US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\130SET.fm
masterpage: Right
010COV.book Page 43 Wednesday, November 25, 2020 3:33 PM
about 10 seconds. However, in some
cases, the front panel display and
indicators may not turn off. In this case,
the brightness of the front panel display
and indicators are the same as [Dimmer:
Dark].
• The display mode does not appear on the
TV screen while the TV input is selected. In
this case, you can check the display mode
in the front panel display.
Changing the Settings
Changing the Brightness
of the Front Panel Display
and Indicators (DIMMER)
You can change the brightness of the
front panel display and power indicator
of the speaker. The brightness of the
power indicator for the optional
subwoofer also changes.
DIMMER
1 Press DIMMER repeatedly to select
the desired display mode.
The display mode appears on the TV
screen.
Mode
Explanation
[Dimmer:
Bright]
[Dimmer:
Dark]
[Dimmer:
Off]
The front panel display
and indicators light
brightly.
The front panel display
and indicators light
darkly.
The front panel display
and indicators are
turned off.
Notes
• The front panel display and indicators are
turned off when [Dimmer: Off] is selected.
They turn on automatically when you
press any button, then turn off again if you
do not operate the speaker system for
43US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\130SET.fm
masterpage: Left
010COV.book Page 44 Wednesday, November 25, 2020 3:33 PM
Saving Power in Standby
Mode
Check that you have made the following
settings:
–
[Setup] - [Advanced Settings] -
[HDMI Settings] - [Standby Through] is
set to [Off].
–
[Setup] - [Advanced Settings] -
[System Settings] - [Network/
Bluetooth Standby] is set to [Off].
Performing Easy Setup
You can make basic initial settings,
speaker settings, and network settings
for the speaker system easily by
performing Easy Setup.
1 Press HOME.
The home menu appears on the TV
screen.
2 Select
[Setup] - [Easy Setup]
on the home menu.
The [Easy Setup] screen appears on
the TV screen.
3 Select the desired setting.
• [Easy Initial Setup]: Performs the
basic initial settings including the
speaker settings and network
settings.
• [Easy Sound Setup]: Performs the
basic speaker settings for
optimizing the surround sound for
your environment.
• [Easy Network Setup]: Performs
the basic network settings.
4 Perform settings by following the
on-screen instructions.
44US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\130SET.fm
masterpage: Right
010COV.book Page 45 Wednesday, November 25, 2020 3:33 PM
Performing Advanced Settings
Using the [Advanced Settings] Menu
You can make various adjustments to items such as picture and sound on the
[Advanced Settings] menu.
1 Press HOME.
The home menu appears on the TV screen.
2 Select
[Setup] - [Advanced Settings] on the home menu.
The [Advanced Settings] screen appears on the TV screen.
3 Select the setting item.
For details about the setting items, refer to Help Guide.
Setting item
Explanation
[Speaker Settings]
Makes the speakers settings for installing and
connections.
[Audio Settings]
Makes the audio output settings.
[HDMI Settings]
Makes the HDMI settings.
[Bluetooth Settings]
Makes detailed settings for the BLUETOOTH
function.
[System Settings]
Makes the speaker system-related settings.
[Network Settings]
Makes detailed settings for the Internet.
[Resetting]
[Software Update]
Resets the speaker system to the factory default
settings.
Updates the software of the speaker system or
optional subwoofer.
45US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\130SET.fm
masterpage: Left
010COV.book Page 46 Wednesday, November 25, 2020 3:33 PM
Updating the Software
By updating your software to the latest
version, you can take advantage of the
newest functions.
For information about update functions,
visit the following website:
• For customers in Americas
https://www.sony.com/am/support
• For customers in Europe
https://www.sony.eu/support
• For customers in Asia-Pacific, Oceania,
Middle East, and Africa
https://www.sony-asia.com/support
Notes
• It may take up to 20 minutes for the
update to be completed.
• An Internet environment is necessary to
perform updates via the Internet.
• While the updating operation is in
progress, do not turn on or off the speaker
system, disconnect the AC power cord
(mains lead), disconnect/connect an
HDMI cable, or operate the speaker
system or TV. Wait for the software
update to complete.
• Set
[Setup] - [Advanced Settings] -
[Network Settings] - [Auto Update
Settings] - [Auto Update] to [On] when you
want to perform software updates
automatically. Software update may be
performed even if you select [Off] in [Auto
Update] depending on the details of the
updates. For details, refer to Help Guide.
1 Make sure that the speakers are
turned on and connected to the
speaker system. When using the
optional subwoofer, make sure
that it is turned on and connected
to the speaker system.
The power indicators of the
speakers and optional subwoofer
light in green.
2 Press HOME.
The home menu appears on the TV
screen.
46US
3 Select
[Setup] - [Advanced
Settings] on the home menu.
If the speaker system detects
update information for the speaker
system on the network, the update
notification and [Software Update]
appears on the home menu. In this
case, select [Software Update] and
follow the on-screen instructions.
4 Select [Software Update].
The [Software Update] screen
appears on the TV screen.
5 Select the item for updating.
Select the updating item from the
following items by pressing / and
, then update the software by
following the on-screen
instructions.
When a software update starts, the
speaker system automatically
reboots.
During a software update, [UPDATE]
appears in the front panel display.
After the update is complete, the
speaker system automatically
reboots.
[Network Update]
Updates the software using the available
network. Make sure that the network is
connected to the Internet.
[USB Update]
Updates the software using a USB
memory. For details on updating, refer
to the instructions that are displayed
when downloading the update file.
[Wireless Speakers Update]
Updates the software of the speakers or
optional subwoofer when the software
of the speaker system is the latest
version.
Note
If updating of the speakers or optional
subwoofer does not work, move them to a
location near the control box and update.
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm
masterpage: Right
010COV.book Page 47 Wednesday, November 25, 2020 3:33 PM
Troubleshooting
Troubleshooting
If the speaker system does not work
properly, handle it in the following order.
1 Search for the cause and
solution of the issue by referring
to these Operating Instructions
or Help Guide.
The troubleshooting method is
listed in “Troubleshooting.”
For the functions that are not
mentioned in Operating
Instructions, refer to Help Guide.
• For customers in Americas
https://
rd1.sony.net/help/
ht/a9/h_uc/
• For customers in other countries/
regions
https://
rd1.sony.net/help/
ht/a9/h_zz/
2 Search for the cause and
solution of the issue on the Sony
support site.
Sony support site provides latest
support information and
Frequently Asked Questions.
• For customers in Americas
https://www.sony.com/am/
support
• For customers in Europe
https://www.sony.eu/support
• For customers in Asia-Pacific,
Oceania, Middle East, and Africa
https://www.sony-asia.com/
support
3 Reset the speaker system.
All the settings of the speaker
system return to their initial
status.
4 Should any problems persist,
consult your nearest Sony
dealer.
Be sure to bring your control box
and speakers, even if it seems as
though only one has a problem,
when you request to repair.
47US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm
masterpage: Left
010COV.book Page 48 Wednesday, November 25, 2020 3:33 PM
Power
The speaker system does not power
up.
Check that the AC power cord (mains
lead) is connected securely.
Disconnect the AC power cord (mains
lead) from the wall outlet (mains), and
then reconnect after several minutes.
The speaker system does not turn
on even when the TV is turned on.
Set
[Setup] - [Advanced Settings]
- [HDMI Settings] - [Control for HDMI]
to [On]. The TV must support the
Control for HDMI function (page 40).
For details, refer to the operating
instructions of your TV.
Check the speaker settings of the TV.
The speaker system power syncs with
the speaker settings of the TV. For
details, refer to the operating
instructions of your TV.
Depending on the TV, if the sound
was output from the speakers of the
TV the previous time, the speaker
system may not turn on by
interlocking with the TV power even
when the TV is turned on.
The speaker system turns off when
the TV is turned off.
Check the setting of
[Setup] -
[Advanced Settings] - [HDMI Settings]
- [Standby Linked to TV]. When
[Standby Linked to TV] is set to [On] or
[Auto], the speaker system turns off
automatically when you turn off the
TV.
The speaker system does not turn
off even when the TV is turned off.
Check the setting of
[Setup] -
[Advanced Settings] - [HDMI Settings]
- [Standby Linked to TV]. To turn the
speaker system off automatically,
regardless of the input when you turn
off the TV, set [Standby Linked to TV]
to [On]. The TV must support the
Control for HDMI function (page 40).
48US
For details, refer to the operating
instructions of your TV.
The speaker system cannot be
turned off.
The speaker system may be in demo
mode. To cancel demo mode, reset
the speaker system. Press and hold
(power) on the control box for more
than 10 seconds (page 55).
Picture
There is no picture or the picture is
not output correctly.
Select the appropriate input
(page 24).
When there is no picture while the TV
input is selected, select the TV
channel that you want using the TV
remote control.
When there is no picture while the
HDMI input is selected, press the
playback button of the connected
device.
Disconnect an HDMI cable, then
connect it again. Make sure that the
cable is firmly inserted.
When there is no picture from the
connected device or the picture from
the connected device is not output
correctly, change the setting of
[Setup] - [Advanced Settings] -
[HDMI Settings] - [HDMI Signal
Format] - [HDMI IN]. For details, refer
to Help Guide.
The speaker system is connected to
an input device that is not HDCP
(High-bandwidth Digital Content
Protection) compliant. In this case,
check the specifications of the
connected device.
The picture on the TV screen is
distorted.
Interference of the wireless function
between the TV/other wireless
devices and the control box may have
occurred. Move the control box,
change the direction of the control
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm
masterpage: Right
010COV.book Page 49 Wednesday, November 25, 2020 3:33 PM
box, or install the control box far away
from the TV/other wireless devices.
There is an interference of the
frequency band between the wireless
LAN and the wireless connection of
the speakers. Switch the band of the
wireless LAN connection of the TV or
device that is playing an image to 2.4
GHz.
3D content from the HDMI IN jack
does not appear on the TV screen.
Depending on the TV or video device,
3D content may not appear. Check the
supported HDMI video format. For
details, refer to Help Guide.
High definition video signal (4K/60p
4:4:4, 4:2:2 and 4K/60p 4:2:0 10 bit,
etc.) from the HDMI IN jack does not
appear on the TV screen.
Depending on the TV or the video
device, high definition video signals
such as 4K may not appear. Check the
video capability and settings of your
TV and video device.
Change the setting of
[Setup] -
[Advanced Settings] - [HDMI Settings]
- [HDMI Signal Format] - [HDMI IN]
according to the video signal that is
supported by a connected TV or
device. For details, refer to Help
Guide.
When you play high definition video
signals such as 4K video content that
is protected by copyright, connect the
speaker system to the HDMI input jack
that supports HDCP2.2 or HDCP2.3 on
the TV. For details, refer to the
operating instructions of your TV.
An image is not displayed on the
entire TV screen.
The aspect ratio on the media is fixed.
Picture and sound of the device that
is connected to the speaker system
are not output from the TV when the
speaker system is not turned on.
Set
[Setup] - [Advanced Settings]
- [HDMI Settings] - [Control for HDMI]
to [On] on the speaker system, and
then set [Standby Through] to [Auto]
or [On].
Turn on the speaker system, and then
switch the input for the device
playing.
If connected to devices other than
those manufactured by Sony that
support the Control for HDMI function,
set
[Setup] - [Advanced Settings]
- [HDMI Settings] - [Standby Through]
to [On].
HDR contents cannot be shown in
high-dynamic range.
Check the settings of the TV and
connected device. For details, refer to
the operating instructions of your TV
and the connected device.
Depending on the [HDMI Signal
Format] setting, an AV device may not
be able to output HDR contents in
HDR format. Change the setting of
[Setup] - [Advanced Settings] -
[HDMI Settings] - [HDMI Signal
Format] - [HDMI IN] according to the
video format that is supported by the
AV device. For details, refer to Help
Guide.
Sound
No sound is output from the
speaker system.
Check that the AC power cords (mains
leads) of the control box and speakers
are connected securely.
If the power indicator of the speaker is
turned off, try the following.
– Check that the AC power cord
(mains lead) of the speaker is
connected securely.
– Press (power) on the bottom of
the speaker to turn on the speaker.
If the power indicator on the speaker
flashes slowly in green or lights in red,
try the following.
– Move the speaker to a location near
the control box so that the power
49US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm
masterpage: Left
010COV.book Page 50 Wednesday, November 25, 2020 3:33 PM
indicator on the speaker lights in
green.
– Connect the speaker and control
box manually (page 22).
– The Control for HDMI function of the
– The eARC or ARC function of the TV
TV is set to on.
is enabled.
– Check the status of the wireless
– On the speaker system,
[Setup]
[Setup] -
connection in
[Advanced Settings] - [Speaker
Settings] - [Wireless Speaker
Settings] - [Check wireless
connection].
It may take about 1 minute until the
sound is output if
[Setup] -
[Advanced Settings] - [Speaker
Settings] - [Wireless Speaker Settings]
- [RF Channel] is switched from [Off] to
[On].
Press (volume) + on the remote
control to increase the volume or
cancel muting (page 12).
The speakers may be connected to
another compatible device. Try
manual connection (page 22).
The speaker system cannot connect
to a TV with the BLUETOOTH
function.
When you connect the speaker
system and TV with an HDMI cable,
the BLUETOOTH connection is
canceled.
No TV sound is output from the
speaker system.
Check the type and connection of an
HDMI cable or TV center speaker
mode cable that is connected to the
speaker system and the TV (page 16).
Disconnect the cables that are
connected to the TV and the speaker
system, then connect them firmly
again. Disconnect the AC power cords
(mains leads) of the TV and the
speaker system from the AC outlets
(mains), then connect them again.
When the speaker system and TV are
connected with an HDMI cable, check
the following.
– The HDMI jack of the connected TV is
labeled with “eARC” or “ARC.”
50US
- [Advanced Settings] - [HDMI
Settings] - [Control for HDMI] is set
to [On].
If your TV is not compatible with
[Setup] - [Advanced
eARC, set
Settings] - [HDMI Settings] - [eARC] to
[Off].
Switch the input of the speaker
system to the TV input.
Increase the volume on the speaker
system or cancel muting.
If sound of a Blu-ray Disc player, set-
top box, gaming console, etc.
connected to the TV is not output,
connect the device to the HDMI IN jack
of the speaker system and switch
input of the speaker system to the
input for the connected device
([HDMI]) (page 18).
Depending on the order in which you
turn on the TV and the speaker
system, the speaker system may be
muted and [MUTING] is displayed on
the front panel display of the speaker
system. If this happens, turn on the TV
first, then the speaker system.
Press TV/AUDIO SYSTEM on the
remote control to switch the output
for the connected TV sound or set the
speakers setting of your TV to Audio
System. Refer to the operating
instructions of your TV regarding how
to set the TV.
The sound skips or noise is
generated.
If a device that generates
electromagnetic radiation, such as a
wireless LAN device or a microwave
oven is nearby, move the speaker
system away from the device.
Interference may occur by a wireless
LAN connection of a peripheral
device. Change the network
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm
masterpage: Right
010COV.book Page 51 Wednesday, November 25, 2020 3:33 PM
connection of the peripheral device to
the wired LAN.
- [HDMI Settings] - [Standby Through]
to [On].
The control box and speakers are
installed too far away from each
other. Bring them closer together.
If there is any obstacle between the
control box and speakers, remove it or
move the control box and speakers
away from the obstacle.
Do not install the control box in the
inner position of a shelf. Install the
control box in or on a shelf so that the
front panel display is not hidden.
Move the control box, change the
direction of the control box, or install
the control box far away from a TV.
Set
[Setup] - [Advanced Settings]
- [Speaker Settings] - [Wireless
Speaker Settings] - [Wireless Playback
Quality] to [Connection].
Set
[Setup] - [Advanced Settings]
- [Speaker Settings] - [Wireless
Speaker Settings] - [RF Channel] to
[Off], then set to [On].
Interference of wireless bandwidth
between the network connection and
speaker connection may occur.
Change the wireless LAN connection
of the speaker system to the wired
LAN connection, or switch the band of
the wireless LAN connection to 2.4
GHz.
Picture and sound of the device that
is connected to the speaker system
are not output from the TV when the
speaker system is not turned on.
Set
[Setup] - [Advanced Settings]
- [HDMI Settings] - [Control for HDMI]
to [On] on the speaker system, and
then set [Standby Through] to [Auto]
or [On].
Turn on the speaker system, and then
switch the input for the device
playing.
If connected to devices other than
those manufactured by Sony that
support the Control for HDMI function,
[Setup] - [Advanced Settings]
set
The sound is output from both the
speaker system and TV.
Mute the sound of the speaker system
or TV.
When you connect the speaker
system and TV with the TV center
speaker mode cable and set
[Setup] - [Advanced Settings] -
[Speaker Settings] - [TV Center
Speaker Mode] to [On], the center part
of the speaker system sound is output
from the TV. For detail, refer to Help
Guide.
The sound is interrupted while
watching a TV program or content
on a Blu-ray Disc, etc.
Check the sound mode setting
(page 36). If the sound mode is set to
[Auto Sound], the sound may be
interrupted when the sound mode is
changed automatically according to
the information of the program that is
being played. If you do not want to
change the sound mode
automatically, set the sound mode to
a setting other than [Auto Sound].
The TV sound from this speaker
system lags behind the image.
Set the adjustment value of the delay
between the picture and sound to 0
msec if it is set to the range between
25 msec and 300 msec. For details,
refer to Help Guide.
A time gap between the sound and
picture may occur depending on the
sound source. If your TV has a
function that delays the image, use it
for adjustment. For details, refer to
the operating instructions of your TV.
No sound or only a very low-level
sound of the device connected to
the speaker system is heard.
Press (volume) + on the remote
control and check the volume level
(page 12).
51US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm
masterpage: Left
010COV.book Page 52 Wednesday, November 25, 2020 3:33 PM
Press or (volume) + on the
remote control to cancel the muting
function (page 12).
Make sure the input source is selected
correctly. You should try other input
sources by pressing the input select
button on the remote control (TV/
HDMI/BLUETOOTH).
Make sure that the connectors are
firmly inserted.
When you play content compatible
with copyright protection technology
(HDCP), sound may not be output
from the speaker system.
Change the setting of
[Setup] -
[Advanced Settings] - [HDMI Settings]
- [HDMI Signal Format] - [HDMI IN]. For
details, refer to Help Guide.
The surround effect cannot be
obtained.
Depending on the input signal and
the sound mode setting, surround
sound processing may not work
effectively. The surround effect may
be subtle, depending on the program
or disc.
To play multi-channel audio, check
the digital audio output setting on the
device connected to the speaker
system. For details, refer to the
operating instructions of the
connected device.
No sound is output from the
optional subwoofer.
It may be improved by setting
[Setup] - [Advanced Settings] -
[Speaker Settings] - [Wireless Speaker
Settings] - [Wireless Playback Quality]
to [Connection].
Refer to the operating instructions of
the optional subwoofer.
Sound Field Optimization
Sound Field Optimization failed.
Speakers may not be correctly
located. Check the installation
location on the labels on the bottom
52US
of the four speakers and install them
in the correct location.
Install the speakers upright so that the
labels on the bottom of the speakers
are directed downwards.
– If the speaker is installed sideways,
Sound Field Optimization cannot be
performed properly.
– If the speaker is installed in an
inclined state, the microphone for
measurement of the speaker is also
inclined and the sound for
measurement ceiling distance is
output in an inclined state. These
may be the cause that the Sound
Field Optimization failed.
Perform Sound Field Optimization
again in a situation where the
surrounding is quiet.
Install the speakers with a distance of
more than 50 cm (19 3/4 in). If the
distance between speakers is too
close, Sound Field Optimization
cannot be performed properly.
Bring the speakers closer if the
speakers are installed at a distance far
away from each other.
If there is any obstacle between
speakers or the microphone for
measurement of the speaker is
blocked by an obstacle, Sound Field
Optimization cannot be performed
properly. Remove it if there is any
obstacle between speakers or in front
of speakers.
Mobile Device Connection
Pairing cannot be achieved.
Bring this speaker system and the
BLUETOOTH device closer together.
Make sure this speaker system is not
receiving interference from a wireless
LAN device, other 2.4 GHz wireless
devices, or a microwave oven. If a
device that generates
electromagnetic radiation is nearby,
move the device away from this
speaker system.
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm
masterpage: Right
010COV.book Page 53 Wednesday, November 25, 2020 3:33 PM
BLUETOOTH connection cannot be
completed.
Make sure that [BT] appears in the
front panel display (page 27).
Make sure the BLUETOOTH device to
be connected with is turned on and
the BLUETOOTH function is enabled.
Bring this speaker system and the
BLUETOOTH device closer together.
Pair this speaker system and the
BLUETOOTH device again. You may
need to cancel the pairing with this
speaker system using your
BLUETOOTH device first.
Pairing information may be deleted.
Perform the pairing operation again
(page 27).
Sound of the connected BLUETOOTH
mobile device is not output from the
speaker system.
Make sure that [BT] appears in the
front panel display (page 27).
Bring this speaker system and the
BLUETOOTH device closer together.
If a device that generates
electromagnetic radiation, such as a
wireless LAN device, other
BLUETOOTH devices, or a microwave
oven is nearby, move the device away
from this speaker system.
Remove any obstacle between this
speaker system and the BLUETOOTH
device or move this speaker system
away from the obstacle.
Reposition the connected
BLUETOOTH device.
Switch the wireless LAN frequency of
any nearby wireless LAN router or PC
to the 5 GHz range.
Increase the volume on the connected
BLUETOOTH device.
Headphones Connection
with the BLUETOOTH
Function
Pairing cannot be achieved.
Bring this speaker system and the
BLUETOOTH headphones closer
together.
Make sure this speaker system is not
receiving interference from a wireless
LAN device, other 2.4 GHz wireless
devices, or a microwave oven. If a
device that generates
electromagnetic radiation is nearby,
move the device away from this
speaker system.
BLUETOOTH connection cannot be
completed.
Make sure that [BT TX] appears in the
front panel display (page 29).
Make sure the BLUETOOTH
headphones to be connected with is
turned on and the BLUETOOTH
function is enabled.
Bring this speaker system and the
BLUETOOTH headphones closer
together.
Pair this speaker system and the
BLUETOOTH headphones again. You
may need to cancel the pairing for the
BLUETOOTH headphones with this
speaker system first. See “To remove
the paired headphones from the
device list” (page 30).
Pairing information may be deleted.
Perform the pairing operation again
(page 29).
No sound is output from the
connected BLUETOOTH
headphones.
Make sure that [BT TX] appears in the
front panel display (page 29).
Bring this speaker system and the
BLUETOOTH headphones closer
together.
If a device that generates
electromagnetic radiation, such as a
53US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm
masterpage: Left
010COV.book Page 54 Wednesday, November 25, 2020 3:33 PM
Some content may not be output due
– Playback devices (Blu-ray Disc
wireless LAN device, other
BLUETOOTH devices, or a microwave
oven is nearby, move the device away
from this speaker system.
Remove any obstacle between this
speaker system and the BLUETOOTH
headphones, or move this speaker
system away from the obstacle.
Reposition the connected
BLUETOOTH headphones.
Switch the wireless LAN frequency of
any nearby wireless LAN router or PC
to the 5 GHz range.
Increase the volume on the connected
BLUETOOTH headphones.
Set
[Setup] - [Advanced Settings]
- [Bluetooth Settings] - [Wireless
Playback Quality] to [LDAC Stable
Connection (Auto)] or [SBC Stable
Connection (Auto)].
to content protection.
Remote Control
The remote control of this speaker
system does not function.
Point the remote control at the
remote control sensor on the control
box (page 10).
Remove any obstacles in the path
between the remote control and the
speaker system.
Replace both batteries in the remote
control with new ones if they are
weak.
Make sure you are pressing the
correct button on the remote control.
Others
The Control for HDMI function does
not work properly.
Check the connection with the
speaker system (page 15).
Enable the Control for HDMI function
on the TV. For details, refer to the
operating instructions of your TV.
54US
Wait a while, and then try again. If you
unplug the speaker system, it will take
a while before operations can be
made. Wait for 15 seconds or longer,
and then try again.
Make sure the devices connected to
the speaker system support the
Control for HDMI function.
Enable the Control for HDMI function
on the devices connected to the
speaker system. For details, refer to
the operating instructions of your
device.
The type and number of devices that
can be controlled by the Control for
HDMI function is restricted by the
HDMI CEC standard as follows:
– Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up to 3
devices
player, DVD player, etc.): up to 3
devices (this speaker system uses
one of them)
– Tuner-related devices: up to 4
devices
– Audio system (receiver/
headphones): up to 1 device (used
by this speaker system)
[PRTCT], [PUSH], speaker name ([FL],
[FR], [RL], [RR], or [SUB]), and
[POWER] flash alternately in the
front panel display.
Press (power) on the corresponding
speaker ([FL]: left front speaker, [FR]:
right front speaker, [RL]: left rear
speaker, [RR]: right rear speaker,
[SUB]: optional subwoofer) to turn
each off. For the speaker, disconnect
the AC power cord (mains lead), then
restart the speaker system. For the
optional subwoofer, disconnect the
AC power cord (mains lead) and make
sure nothing is obstructing the
ventilation holes of the optional
subwoofer, then restart the speaker
system. If they are reconnected
properly, the display in the front panel
display returns to the normal display.
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm
masterpage: Right
010COV.book Page 55 Wednesday, November 25, 2020 3:33 PM
[HIGH], [TEMP], and [ERROR] appear
alternately for 2 seconds each in the
front panel display, [STANDBY]
appears in the front panel display,
then the speaker system is turned
off.
High-temperature is detected in the
speaker system. Press (power) to
restart the speaker system.
[BT TX] appears in the front panel
display.
Set
[Setup] - [Advanced Settings]
- [Bluetooth Settings] - [Bluetooth
Mode] to [Receiver]. [BT TX] appears
in the front panel display if [Bluetooth
Mode] is set to [Transmitter].
Wireless functions (wireless LAN,
the BLUETOOTH function, speakers,
or optional subwoofer) are
unstable.
Do not place metal objects other than
a TV around the speaker system.
The speaker system restarts.
When connecting to a TV with a
resolution that is different from that of
the speaker system, the speaker
system may restart to reset the
picture output setting.
Resetting the Speaker
System
If the speaker system still does not
operate properly, reset the speaker
system as follows.
1 Press HOME.
The home menu appears on the TV
screen.
2 Select
[Setup] - [Advanced
Settings] on the home menu.
3 Select [Resetting].
4 Select the menu item you want to
reset.
5 Select [Start].
To cancel resetting
Select [Cancel] in step 5.
If You Cannot Perform
Resetting Using the Home
Menu
1 Press and hold (power) on the
control box for more than 10
seconds.
The settings return to their initial
status.
Note
By resetting, the link with the speakers and
optional subwoofer may be lost. In this
case, reconnect the speakers (page 22) and
optional subwoofer by referring to its
operating instructions.
55US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\140TBS.fm
masterpage: Left
010COV.book Page 56 Wednesday, November 25, 2020 3:33 PM
Resetting the Speakers
1 Press and hold (power) on the
bottom of the speaker for more
than 10 seconds.
The power indicator of the speaker
flashes slowly in red and resetting
starts.
The power indicator of the speaker
flashes in green and orange
alternately when resetting is
completed.
When resetting is completed,
disconnect the AC power cord
(mains lead), then connect the AC
power cord (mains lead) after the
power indicator turns off.
56US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Right
010COV.book Page 57 Wednesday, November 25, 2020 3:33 PM
Additional Information
Specifications
Speakers (SA-FLA9/SA-
FRA9/SA-RLA9/SA-RRA9)
Tweeter: 42 W (at 6 ohms, 10 kHz)
Woofer: 42 W (at 6 ohms, 100 Hz)
Front speaker section
Speaker system
2way speaker system bass reflex type
Woofer
Tweeter
70 mm × 82 mm (2 7/8 in × 3 1/4 in)
cone type
19 mm (3/4 in) soft dome type
The following descriptions are the
specifications per speaker.
Top speaker section
Speaker system
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
Speaker
Full range speaker system acoustic
suspension type
46 mm × 54 mm (1 13/16 in × 2 1/4 in)
cone type
DISTORTION:
(FTC)
Top speaker:
With 6 ohms loads, both channels
driven, from 200 - 10k Hz; rated 30 W
per channel minimum RMS power,
with no more than 1% total harmonic
distortion from 250 mW to rated
output.
Tweeter:
With 6 ohms loads, both channels
driven, from 5,000 - 10k Hz; rated 20 W
per channel minimum RMS power,
with no more than 1% total harmonic
distortion from 250 mW to rated
output.
Woofer:
With 6 ohms loads, both channels
driven, from 200 - 5,000 Hz; rated
30 W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250 mW to
rated output.
Canadian models:
POWER OUTPUT (rated)
Top speaker: 35 W (at 6 ohms, 1 kHz, 1%
THD)
Tweeter: 25 W (at 6 ohms, 10 kHz, 1%
THD)
Woofer: 35 W (at 6 ohms, 100 Hz, 1%
THD)
POWER OUTPUT (reference)
Top speaker: 42 W (at 6 ohms, 1 kHz)
General
Power requirements
120 V AC, 60 Hz
Power consumption
On: 22 W
Stand by mode: 1 W or less
Turned off: 0.5 W or less
Dimensions* (approx.) (w/h/d)
160 mm × 312.4 mm × 147 mm (6 3/8 in
× 12 3/8 in × 5 7/8 in)
* Not including projection portion
Mass (approx.)
2.6 kg (5 lb 2 oz)
Control Box (TMR-A9WT)
Inputs
HDMI IN*
Outputs
HDMI OUT (TV ARC/eARC)*
S-CENTER OUT
* HDMI IN and HDMI OUT (TV ARC/eARC)
jacks support HDCP2.2 and HDCP2.3
protocols. HDCP2.2 and HDCP2.3 are
newly enhanced copyright protection
technology that is used to protect
content such as 4K movies.
HDMI Section
Connector
Type A (19pin)
57US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Left
010COV.book Page 58 Wednesday, November 25, 2020 3:33 PM
USB section (For update use only)
(USB) port: Type A (For connecting USB
memory)
LAN section
LAN(100) terminal
100BASE-TX Terminal
Wireless LAN section
Communication system
IEEE 802.11 a/b/g/n/ac
Frequency band
2.4 GHz, 5 GHz
BLUETOOTH section
Communication system
BLUETOOTH Specification version 5.0
Output
BLUETOOTH Specification Power
Class 1
Maximum communication range
Line of sight approx. 30 m1)
Maximum number of devices to be
registered
9 devices
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles2)
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
Supported Codecs3)
SBC4), AAC5), LDAC
Transmission range (A2DP)
20 Hz - 40,000 Hz (LDAC sampling
frequency 96 kHz with 990 kbps
transmission)
20 Hz - 20,000 Hz (Sampling frequency
44.1 kHz)
1) The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
2) BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
58US
3) Codec: Audio signal compression and
conversion format
4) Abbreviation for Subband Codec
5) Abbreviation for Advanced Audio
Coding
General
Power requirements
DC 12 V (using the supplied AC adaptor
connected to AC 120 V 60 Hz power
supply)
Power consumption
On: xx W
[Network/Bluetooth Standby] - [On]:
Less than xx W
[Network/Bluetooth Standby] - [Off]:
Less than 0.5 W*
* When [Standby Through] is set to
[Off], or [Standby Through] is set to
[Auto] while the connected TV is
turned off.
Dimensions* (approx.) (w/h/d)
150 mm × 52 mm × 150 mm (6 in ×
2 1/8 in × 6 in)
* Not including projection portion
Mass (approx.)
0.7 kg (1 lb 9 oz)
Devices you can stream audio from
• iPhone, iPad, or iPod touch with iOS 11.4 or
• Apple TV 4K or Apple TV HD with tvOS11.4
later
or later1
• HomePodwith iOS 11.4 or later
• Mac with either iTunes 12.8 or later or
macOS Catalina
• PC with iTunes 12.8 or later
Wireless Transmitter/
Receiver Section
Communication system
Wireless Sound Specification version
4.0
Frequency band
5 GHz
Modulation method
OFDM
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Right
010COV.book Page 59 Wednesday, November 25, 2020 3:33 PM
Supplied Accessories
• Remote control (1)
• R03 (size AAA) battery (2)
• HDMI cable (4K, 8K transmission
supported) (1)
• TV center speaker mode cable (1)
• AC adaptor (1)
• AC power cord (mains lead) for the
speaker (4)
• Startup Guide
• Operating Instructions (this document)
Design and specifications are subject to
change without notice.
59US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Left
010COV.book Page 60 Wednesday, November 25, 2020 3:33 PM
Supported Input Audio Formats
Supported audio formats differ depending on the input setting of the speaker system.
“” indicates the supported audio format and “–” indicates the unsupported audio
format in the table below.
HDMI
input
TV input
(eARC)
TV input
(ARC)
Format
LPCM 2ch
LPCM 5.1ch
LPCM 7.1ch
Dolby Digital
Dolby TrueHD
Dolby Digital Plus
Dolby Atmos
Dolby Atmos - Dolby TrueHD
Dolby Atmos - Dolby Digital Plus
DTS-ES Discrete 6.1, DTS-ES Matrix 6.1
DTS-HD High Resolution Audio
DTS-HD Master Audio
DTS
DTS 96/24
DTS:X
Note
–
–
–
–
–
–
–
–
The HDMI IN jack does not support audio formats that contain copy protections, such as Super
Audio CD or DVD-Audio.
60US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Right
010COV.book Page 61 Wednesday, November 25, 2020 3:33 PM
this security may be insufficient
depending on the setting content and
other factors, so always be careful when
performing communication using
BLUETOOTH technology.
• Sony cannot be held liable in any way for
damages or other loss resulting from
information leaks during communication
using BLUETOOTH technology.
• BLUETOOTH communication is not
necessarily guaranteed with all
BLUETOOTH devices that have the same
profile as this speaker system.
• BLUETOOTH devices connected with this
speaker system must comply with the
BLUETOOTH specification prescribed by
the Bluetooth SIG, Inc., and must be
certified to comply. However, even when
a device complies with the BLUETOOTH
specification, there may be cases where
the characteristics or specifications of the
BLUETOOTH device make it impossible to
connect, or may result in different control
methods, display or operation.
• Noise may occur or the audio may cut off
depending on the BLUETOOTH device
connected with this speaker system, the
communications environment, or
surrounding conditions.
If you have any questions or problems
concerning your speaker system, please
consult your nearest Sony dealer.
On BLUETOOTH
Communication
• BLUETOOTH devices should be used
within approximately 10 meters (33 feet)
(unobstructed distance) of each other.
The effective communication range may
become shorter under the following
conditions.
– When a person, metal object, wall or
other obstruction is between the
devices with a BLUETOOTH connection
– Locations where a wireless LAN is
installed
– Around microwave ovens that are in use
– Locations where other electromagnetic
waves occur
• BLUETOOTH devices and wireless LAN
(IEEE 802.11 b/g/n) use the same
frequency band (2.4 GHz). When using
your BLUETOOTH device near a device
with wireless LAN capability,
electromagnetic interference may occur.
This could result in lower data transfer
rates, noise, or inability to connect. If this
happens, try the following remedies:
– Use this speaker system at least
10 meters (33 feet) away from the
wireless LAN device.
– Turn off the power to the wireless LAN
device when using your BLUETOOTH
device within 10 meters (33 feet).
– Install this speaker system and
BLUETOOTH device as closer to each
other as possible.
• The radio waves broadcast by this speaker
system may interfere with the operation
of some medical devices. Since this
interference may result in malfunction,
always turn off the power on this speaker
system and BLUETOOTH device in the
following locations:
– In hospitals, on trains, in airplanes, at
gas stations, and any place where
flammable gasses may be present
– Near automatic doors or fire alarms
• This speaker system supports security
functions that comply with the
BLUETOOTH specification to ensure
secure connection during communication
using BLUETOOTH technology. However,
61US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Left
010COV.book Page 62 Wednesday, November 25, 2020 3:33 PM
END USER LICENSE
AGREEMENT
IMPORTANT:
BEFORE USING THE SOFTWARE, PLEASE
READ THIS END USER LICENSE
AGREEMENT (“EULA”) CAREFULLY. BY
USING THE SOFTWARE YOU ARE
ACCEPTING THE TERMS OF THIS EULA. IF
YOU DO NOT ACCEPT THE TERMS OF
THIS EULA, YOU MAY NOT USE THE
SOFTWARE.
This EULA is a legal agreement between
you and Sony Electronics Inc. (“SONY”).
This EULA governs your rights and
obligations regarding the SONY
software of SONY and/or its third party
licensors (including SONY’s affiliates)
and their respective affiliates
(collectively, the “THIRD-PARTY
SUPPLIERS”), together with any
updates/upgrades provided by SONY,
any printed, on-line or other electronic
documentation for such software, and
any data files created by operation of
such software (collectively, the
“SOFTWARE”).
Notwithstanding the foregoing, any
software in the SOFTWARE having a
separate end user license agreement
(including, but not limited to, GNU
General Public license and Lesser/
Library General Public License) shall be
covered by such applicable separate end
user license agreement in lieu of the
terms of this EULA to the extent required
by such separate end user license
agreement (“EXCLUDED SOFTWARE”).
SOFTWARE LICENSE
The SOFTWARE is licensed, not sold. The
SOFTWARE is protected by copyright
and other intellectual property laws and
international treaties.
62US
COPYRIGHT
All right and title in and to the
SOFTWARE (including, but not limited to,
any images, photographs, animation,
video, audio, music, text and “applets”
incorporated into the SOFTWARE) is
owned by SONY or one or more of the
THIRD-PARTY SUPPLIERS.
GRANT OF LICENSE
SONY grants you a limited license to use
the SOFTWARE solely in connection with
your compatible device (“DEVICE”) and
only for your individual, non-
commercial use. SONY and the THIRD-
PARTY SUPPLIERS expressly reserve all
rights, title and interest (including, but
not limited to, all intellectual property
rights) in and to the SOFTWARE that this
EULA does not specifically grant to you.
REQUIREMENTS AND
LIMITATIONS
You may not copy, publish, adapt,
redistribute, attempt to derive source
code, modify, reverse engineer,
decompile, or disassemble any of the
SOFTWARE, whether in whole or in part,
or create any derivative works from or of
the SOFTWARE unless such derivative
works are intentionally facilitated by the
SOFTWARE. You may not modify or
tamper with any digital rights
management functionality of the
SOFTWARE. You may not bypass,
modify, defeat or circumvent any of the
functions or protections of the
SOFTWARE or any mechanisms
operatively linked to the SOFTWARE.
You may not separate any individual
component of the SOFTWARE for use on
more than one DEVICE unless expressly
authorized to do so by SONY. You may
not remove, alter, cover or deface any
trademarks or notices on the
SOFTWARE. You may not share,
distribute, rent, lease, sublicense,
assign, transfer or sell the SOFTWARE.
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Right
010COV.book Page 63 Wednesday, November 25, 2020 3:33 PM
The software, network services or other
products other than SOFTWARE upon
which the SOFTWARE’S performance
depends might be interrupted or
discontinued at the discretion of the
suppliers (software suppliers, service
suppliers, or SONY). SONY and such
suppliers do not warrant that the
SOFTWARE, network services, contents
or other products will continue to be
available, or will operate without
interruption or modification.
USE OF SOFTWARE WITH
COPYRIGHTED MATERIALS
The SOFTWARE may be capable of being
used by you to view, store, process and/
or use content created by you and/or
third parties. Such content may be
protected by copyright, other
intellectual property laws, and/or
agreements. You agree to use the
SOFTWARE only in compliance with all
such laws and agreements that apply to
such content. You acknowledge and
agree that SONY may take appropriate
measures to protect the copyright of
content stored, processed or used by
the SOFTWARE. Such measures include,
but are not limited to, counting the
frequency of your backup and
restoration through certain SOFTWARE
features, refusal to accept your request
to enable restoration of data, and
termination of this EULA in the event of
your illegitimate use of the SOFTWARE.
CONTENT SERVICE
PLEASE ALSO NOTE THAT THE
SOFTWARE MAY BE DESIGNED TO BE
USED WITH CONTENT AVAILABLE
THROUGH ONE OR MORE CONTENT
SERVICES (“CONTENT SERVICE”). USE OF
THE SERVICE AND THAT CONTENT IS
SUBJECT TO THE TERMS OF SERVICE OF
THAT CONTENT SERVICE. IF YOU DECLINE
TO ACCEPT THOSE TERMS, YOUR USE OF
THE SOFTWARE WILL BE LIMITED. You
acknowledge and agree that certain
content and services available through
the SOFTWARE may be provided by third
parties over which SONY has no control.
USE OF THE CONTENT SERVICE REQUIRES
AN INTERNET CONNECTION. THE
CONTENT SERVICE MAY BE
DISCONTINUED AT ANY TIME.
INTERNET CONNECTIVITY AND
THIRD PARTY SERVICES
You acknowledge and agree that access
to certain SOFTWARE features may
require an Internet connection for which
you are solely responsible. Further, you
are solely responsible for payment of
any third party fees associated with your
Internet connection, including but not
limited to Internet service provider or
airtime charges. Operation of the
SOFTWARE may be limited or restricted
depending on the capabilities,
bandwidth or technical limitations of
your Internet connection and service.
The provision, quality and security of
such Internet connectivity are the sole
responsibility of the third party providing
such service.
EXPORT AND OTHER
REGULATIONS
You agree to comply with all applicable
export and re-export restrictions and
regulations of the area or country in
which you reside, and not to transfer, or
authorize the transfer, of the SOFTWARE
to a prohibited country or otherwise in
violation of any such restrictions or
regulations.
HIGH RISK ACTIVITIES
The SOFTWARE is not fault-tolerant and
is not designed, manufactured or
intended for use or resale as on-line
control equipment in hazardous
environments requiring fail-safe
performance, such as in the operation of
nuclear facilities, aircraft navigation or
communication systems, air traffic
control, direct life support machines, or
weapons systems, in which the failure of
63US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Left
010COV.book Page 64 Wednesday, November 25, 2020 3:33 PM
the SOFTWARE could lead to death,
personal injury, or severe physical or
environmental damage (“HIGH RISK
ACTIVITIES”). SONY, each of the THIRD-
PARTY SUPPLIERS, and each of their
respective affiliates specifically disclaim
any express or implied warranty, duty or
condition of fitness for HIGH RISK
ACTIVITIES.
EXCLUSION OF WARRANTY ON
SOFTWARE
You acknowledge and agree that use of
the SOFTWARE is at your sole risk and
that you are responsible for use of the
SOFTWARE. The SOFTWARE is provided
“AS IS,” without warranty, duty or
condition of any kind.
SONY AND EACH OF THE THIRD-PARTY
SUPPLIERS (for purposes of this Section,
SONY and each of the THIRD-PARTY
SUPPLIERS shall be collectively referred
to as “SONY”) EXPRESSLY DISCLAIM ALL
WARRANTIES, DUTIES OR CONDITIONS,
EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY,
NONINFRINGEMENT AND FITNESS FOR A
PARTICULAR PURPOSE. SONY DOES NOT
WARRANT OR MAKE ANY CONDITIONS
OR REPRESENTATIONS (A) THAT THE
FUNCTIONS CONTAINED IN ANY OF THE
SOFTWARE WILL MEET YOUR
REQUIREMENTS OR THAT THEY WILL BE
UPDATED, (B) THAT THE OPERATION OF
ANY OF THE SOFTWARE WILL BE
CORRECT OR ERROR-FREE OR THAT ANY
DEFECTS WILL BE CORRECTED, (C) THAT
THE SOFTWARE WILL NOT DAMAGE ANY
OTHER SOFTWARE, HARDWARE OR
DATA, (D) THAT ANY SOFTWARE,
NETWORK SERVICES (INCLUDING THE
INTERNET) OR PRODUCTS (OTHER THAN
THE SOFTWARE) UPON WHICH THE
SOFTWARE’S PERFORMANCE DEPENDS
WILL CONTINUE TO BE AVAILABLE,
UNINTERRUPTED OR UNMODIFIED, AND
(E) REGARDING THE USE OR THE RESULTS
OF THE USE OF THE SOFTWARE IN TERMS
64US
OF ITS CORRECTNESS, ACCURACY,
RELIABILITY, OR OTHERWISE.
NO ORAL OR WRITTEN INFORMATION
OR ADVICE GIVEN BY SONY OR AN
AUTHORIZED REPRESENTATIVE OF SONY
SHALL CREATE A WARRANTY, DUTY OR
CONDITION OR IN ANY WAY INCREASE
THE SCOPE OF THIS WARRANTY.
SHOULD THE SOFTWARE PROVE
DEFECTIVE YOU ASSUME THE ENTIRE
COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION. SOME
JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES,
SO THESE EXCLUSIONS MAY NOT APPLY
TO YOU.
LIMITATION OF LIABILITY
SONY AND EACH OF THE THIRD-PARTY
SUPPLIERS (for purposes of this Section,
SONY and each of the THIRD-PARTY
SUPPLIERS shall be collectively referred
to as “SONY”) SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY, BREACH OF
CONTRACT, NEGLIGENCE, STRICT
LIABILITY OR UNDER ANY OTHER LEGAL
THEORY RELATED TO THE SOFTWARE,
INCLUDING, BUT NOT LIMITED TO, ANY
DAMAGES ARISING OUT OF LOSS OF
PROFITS, LOSS OF REVENUE, LOSS OF
DATA, LOSS OF USE OF THE SOFTWARE
OR ANY ASSOCIATED HARDWARE,
DOWN TIME AND USER’S TIME, EVEN IF
ANY OF THEM HAVE BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN
ANY CASE, EACH AND ALL OF THEIR
AGGREGATE LIABILITY UNDER ANY
PROVISION OF THIS EULA SHALL BE
LIMITED TO THE AMOUNT ACTUALLY
PAID FOR THE PRODUCT. SOME
JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE EXCLUSION
OR LIMITATION MAY NOT APPLY TO
YOU.
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Right
010COV.book Page 65 Wednesday, November 25, 2020 3:33 PM
AUTOMATIC UPDATE FEATURE
From time to time, SONY or the THIRD-
PARTY SUPPLIERS may automatically
update or otherwise modify the
SOFTWARE, including, but not limited to,
for purposes of enhancement of security
functions, error correction and
improvement of functions, at such time
as you interact with SONY’s or third
parties’ servers, or otherwise. Such
updates or modifications may delete or
change the nature of features or other
aspects of the SOFTWARE, including, but
not limited to, functions you may rely
upon. You acknowledge and agree that
such activities may occur at SONY’s sole
discretion and that SONY may condition
continued use of the SOFTWARE upon
your complete installation or acceptance
of such update or modifications. Any
updates/ modifications shall be deemed
to be, and shall constitute part of, the
SOFTWARE for purposes of this EULA. By
acceptance of this EULA, you consent to
such update/modification.
ENTIRE AGREEMENT, WAIVER,
SEVERABILITY
This EULA and SONY’s privacy policy,
each as amended and modified from
time to time, together constitute the
entire agreement between you and
SONY with respect to the SOFTWARE.
The failure of SONY to exercise or
enforce any right or provision of this
EULA shall not constitute a waiver of
such right or provision. If any part of this
EULA is held invalid, illegal, or
unenforceable, that provision shall be
enforced to the maximum extent
permissible so as to maintain the intent
of this EULA, and the other parts will
remain in full force and effect.
GOVERNING LAW AND
JURISDICTION
The United Nations Convention on
Contracts for the International Sale of
Goods shall not apply to this EULA. This
EULA shall be governed by the laws of
Japan, without regards to conflict of laws
provisions. Any dispute arising out of
this EULA shall be subject to the
exclusive venue of the Tokyo District
Court in Japan, and the parties hereby
consent to the venue and jurisdiction of
such courts.
EQUITABLE REMEDIES
Notwithstanding anything contained in
this EULA to the contrary, you
acknowledge and agree that any
violation of or non-compliance with this
EULA by you will cause irreparable harm
to SONY, for which monetary damages
would be inadequate, and you consent
to SONY obtaining any injunctive or
equitable relief that SONY deems
necessary or appropriate in such
circumstances. SONY may also take any
legal and technical remedies to prevent
violation of and/or to enforce this EULA,
including, but not limited to, immediate
termination of your use of the
SOFTWARE, if SONY believes in its sole
discretion that you are violating or
intend to violate this EULA. These
remedies are in addition to any other
remedies SONY may have at law, in
equity or under contract.
TERMINATION
Without prejudice to any of its other
rights, SONY may terminate this EULA if
you fail to comply with any of its terms.
In case of such termination, you must
cease all use, and destroy any copies, of
the SOFTWARE.
AMENDMENT
SONY RESERVES THE RIGHT TO AMEND
ANY OF THE TERMS OF THIS EULA AT ITS
SOLE DISCRETION BY POSTING NOTICE
ON A SONY DESIGNATED WEB SITE, BY
EMAIL NOTIFICATION TO AN EMAIL
ADDRESS PROVIDED BY YOU, BY
PROVIDING NOTICE AS PART OF THE
PROCESS IN WHICH YOU OBTAIN
65US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Left
010COV.book Page 66 Wednesday, November 25, 2020 3:33 PM
UPGRADES/UPDATES OR BY ANY OTHER
LEGALLY RECOGNIZABLE FORM OF
NOTICE. If you do not agree to the
amendment, you should promptly
contact SONY for instructions. Your
continued use of the SOFTWARE after
the effective date of any such notice
shall be deemed your agreement to be
bound by such amendment.
THIRD-PARTY BENEFICIARIES
Each THIRD-PARTY SUPPLIER is an
express intended third-party beneficiary
of, and shall have the right to enforce,
each provision of this EULA with respect
to the SOFTWARE of such party.
Should you have any questions
concerning this EULA, you may contact
SONY by writing to SONY at applicable
contact address of each area or country.
Copyright © 2021 Sony Electronics Inc.
All rights reserved.
66US
Precautions
On safety
• Should any solid object or liquid fall into
the speaker system, unplug the speaker
system and have it checked by qualified
personnel before operating it any further.
• Do not climb on the speaker system, as
you may fall down and injure yourself, or
speaker system damage may result.
On power sources
• Before operating the speaker system,
check that the operating voltage is
identical to your local power supply. The
operating voltage is indicated on the
nameplate on the bottom of the control
box.
• If you are not going to use the speaker
system for a long time, be sure to
disconnect the speaker system from the
wall outlet (mains). To disconnect the AC
power cord (mains lead), grasp the plug
itself; never pull the cord.
• One blade of the plug is wider than the
other for the purpose of safety and will fit
into the wall outlet (mains) only one way.
If you are unable to insert the plug fully
into the outlet, contact your dealer.
• AC power cord (mains lead) must be
changed only at a qualified service shop.
On heat buildup
Although the speaker system heats up
during operation, this is not a malfunction.
If you continuously use this speaker system
at high volume, the speaker system
temperature at the rear and bottom rises
considerably. To avoid burning yourself, do
not touch the speaker system.
On placement
• Do not place the speaker system near
heat sources or in a place subject to direct
sunlight, excessive dust, or mechanical
shock.
• Do not place anything at the rear of the
speaker system that might block the
ventilation holes and cause malfunctions.
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Right
010COV.book Page 67 Wednesday, November 25, 2020 3:33 PM
Disclaimer regarding services
offered by third parties
Network services, content and the
(operating speaker system and) software of
this product may be subject to individual
terms and conditions and changed,
interrupted or discontinued at any time and
may require fees, registration and credit
card information.
Notes on updating
This speaker system allows you to update
the software automatically when
connected to the Internet via a wireless or
wired network.
You can add new features and use the
speaker system with more convenience
and safety by updating the speaker system.
If you do not want to update automatically,
you can disable the function by using Sony
| Music Center installed on your
smartphone or tablet. However, the
speaker system may update the software
automatically for reasons such as safety,
even if this function is disabled. You can
also update the software using the settings
menu when this function is disabled. For
details, refer to Help Guide.
You may not use the speaker system while
the software is being updated.
• Do not place metal objects other than a TV
around the speaker system. Wireless
functions may be unstable.
• If the speaker system is being used in
combination with a TV, VCR, or tape deck,
noise may result and picture quality may
suffer. In such a case, place the speaker
system away from the TV, VCR, or tape
deck.
• Use caution when placing the speaker
system on a surface that has been
specially treated (with wax, oil, polish,
etc.), as staining or discoloration of the
surface may result.
• Take care to avoid any possible injury from
the corners of the speaker system.
• Keep 3 cm (1 3/16 in) or more space under
the speaker system when you hang it on a
wall.
• The speakers of this speaker system are
not of magnetically shielded type. Do not
place magnetic cards on the speaker
system or near it.
On operation
Before connecting other devices, be sure to
turn off and unplug the speaker system.
If you encounter color irregularity
on a nearby TV screen
Color irregularities may be observed on
certain types of TV sets.
If color irregularity is observed...
Turn off the TV set, then turn it on again
after 15 to 30 minutes.
If color irregularity is observed
again...
Place the speaker system further away from
the TV set.
On cleaning
Clean the speaker system with a soft, dry
cloth. Do not use any type of abrasive pad,
scouring powder, or solvent such as alcohol
or benzine.
If you have any question or problem
concerning your speaker system, please
consult your nearest Sony dealer.
67US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Left
010COV.book Page 68 Wednesday, November 25, 2020 3:33 PM
Copyrights and
Trademarks
This speaker system incorporates Dolby*
Digital and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories. Dolby, Dolby Vision, Dolby
Atmos, and the double-D symbol are
registered trademarks of Dolby
Laboratories Licensing Corporation.
Confidential unpublished works.
Copyright © 2012–2020 Dolby
Laboratories. All rights reserved.
**For DTS patents, see http://
patents.dts.com. Manufactured under
license from DTS, Inc. DTS, DTS:X, and the
DTS:X logo are registered trademarks or
trademarks of DTS, Inc. in the United
States and other countries. © 2020 DTS,
Inc. ALL RIGHTS RESERVED.
The BLUETOOTH® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Sony
Corporation is under license. Other
trademarks and trade names are those of
their respective owners.
The terms HDMI, HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc.
Google, Google Play, Google Home and
Chromecast built-in are trademarks of
Google LLC. Google Assistant is not
available in certain languages and
countries.
Apple, AirPlay, iPad, iPad Air, iPad Pro,
iPhone, iPod, and iPod touch are
trademarks of Apple Inc., registered in the
U.S. and other countries.
Use of the Works with Apple badge means
that an accessory has been designed to
work specifically with the technology
identified in the badge and has been
68US
certified by the developer to meet Apple
performance.
“BRAVIA” logo is a trademark of Sony
Corporation.
WALKMAN® and WALKMAN® logo are
registered trademarks of Sony Corporation.
“PlayStation” is a registered trademark or
trademark of Sony Interactive
Entertainment Inc.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or
other countries.
This product is protected by certain
intellectual property rights of Microsoft
Corporation. Use or distribution of such
technology outside of this product is
prohibited without a license from Microsoft
or an authorized Microsoft subsidiary.
Wi-Fi®, Wi-Fi Protected Access® and Wi-Fi
Alliance® are registered trademarks of Wi-Fi
Alliance.
Wi-Fi CERTIFIED™, WPA™, and WPA2™ are
trademarks of Wi-Fi Alliance.
LDAC™ and LDAC logo are trademarks of
Sony Corporation.
LDAC is an audio coding technology
developed by Sony that enables the
transmission of High-Resolution (Hi-Res)
Audio content, even over a Bluetooth
connection. Unlike other Bluetooth
compatible coding technologies such as
SBC, it operates without any down-
conversion of the Hi-Res Audio content*,
and allows approximately three times more
data** than those other technologies to be
transmitted over a Bluetooth wireless
network with unprecedented sound
quality, by means of efficient coding and
optimized packetization.
* excluding DSD format contents
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\150OTH.fm
masterpage: Right
010COV.book Page 69 Wednesday, November 25, 2020 3:33 PM
**in comparison with SBC (Subband
* Depending on the country and region,
this function may not be available.
All other trademarks are trademarks of their
respective owners.
Coding) when the bitrate of 990 kbps (96/
48 kHz) or 909 kbps (88.2/44.1 kHz) is
selected
This product contains software that is
subject to the GNU General Public License
(“GPL”) or GNU Lesser General Public
License (“LGPL”). These establish that
customers have the right to acquire,
modify, and redistribute the source code of
said software in accordance with the terms
of the GPL or the LGPL.
For details of the GPL, LGPL and other
software licenses, please refer to [Software
License Information] under
[Advanced Settings] - [System Settings] on
the product.
[Setup] -
The software included in this product
contains copyrighted software that is
licensed under the GPLv2 and other
licenses which may require access to
source code. You may find a copy of the
relevant source code as required under the
GPLv2 (and other licenses) at
http://www.sony.net/Products/Linux/.
You may obtain the source code as
required by the GPLv2 on a physical
medium from us for a period of three years
after our last shipment of this product by
applying through the form at
http://www.sony.net/Products/Linux/.
This offer is valid to anyone in receipt of this
information.
Please note that Sony cannot answer or
respond to any inquiries regarding the
content of this source code.
“TRILUMINOS” and “TRILUMINOS” logo are
a registered trademark of Sony
Corporation.
The Spotify Software is subject to third
party licenses found here:
https://www.spotify.com/connect/
third-party-licenses
Spotify and Spotify logos are trademarks of
the Spotify Group.*
69US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\01GB-HTA9UC2\160COVIX.fm
masterpage: Left
010COV.book Page 70 Wednesday, November 25, 2020 3:33 PM
R
Remote control 12
Resetting 55
S
Settings
Item list 45
Resetting 55
Software update 46
Sound Mode 36
V
Voice mode 37
Volume 34
W
Wall mount 15
Wired connection
AV devices 18
TV 16
Wireless connection
BLUETOOTH devices 27
Headphones 29
TV 25
Index
Buttons
AUDIO 38
BLUETOOTH 27
DIMMER 43
IMMERSIVE AE 35
NIGHT 37
VOICE 37
A
ARC 10
Audio format 60
Audio Return Channel 10
B
BLUETOOTH
Function 27
Pairing 27
“BRAVIA” Sync 41
C
Connection (See “Wired connection”
or “Wireless connection” in “Index”)
Control for HDMI 40
D
DTS Dialog control 39
E
eARC 10
Easy Setup 44
Enhanced Audio Return Channel 10
I
Immersive Audio Enhancement 35
Initial settings 44
Installation 15
M
Multiplex broadcast sound 38
N
Night mode 37
P
PRTCT 54
70US
HT-A9
5-025-229-11(1)
C:\HT2020\AC\Data\UC2\5025229111\5025229111HTA9UC2\00COV-
HTA9UC2\170BCO_AC2_UC2.fm
170BCO_AC2_UC2.fm Page 98 Wednesday, November 25, 2020 2:50 PM
masterpage: BCO
The software of this system may be updated in the future. To find out details on any available
updates, please visit the following URL.
The software of this system may be updated in the future. To find out details on any available
updates, please visit the following URL.
The software of this system may be updated in the future. To find out details on any available
updates, please visit the following URL.
https://www.sony.com/am/support
©2021 Sony Corporation
Printed in Malaysia
Imprimé en Malaisie
5-025-229-11(1)
HT-A9
5-025-229-11(1)
1 2 3 | 04 Short-Term Confidential Internal Photo | Internal Photos | 1.34 MiB | March 02 2021 / September 01 2021 | delayed release |
1 2 3 | 04 Short-Term Confidential External Photo | External Photos | 613.17 KiB | March 02 2021 / September 01 2021 | delayed release |
1 2 3 | 06 Label | ID Label/Location Info | 203.75 KiB | March 02 2021 / March 04 2021 |
SONY MODEL No. TMR-AQWT Cerone 12 V == 1.5 A USB: 5 V == 500 mA Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Confidential unpublished works. Copyright 2012-2020 Dolby Laboratories. All rights reserved. For DTS patents, see http://patents.dts.com. STM Mle UM Ee Ue Oe]
OTe MMT) (4 COM UMC MOTOROLA ORM TCM UCN ACUMEN ILCIUC MECC PAR Ue CMa lee sd Tae T MUR Me Len 5 including interference that may cause undesired operation. FABRIQUE EN MALAISIE FCC ID: AK8TMRASWT In case of repairing, please bring the IC: 409B-TMRASWT entire system set to the service station. MADE IN MALAYSIA ore SS YAN VER tH SUS 503014201 UC2 LOT SERIAL No. B@@O@eesg
1 2 3 | 06 Label and Location | ID Label/Location Info | 238.78 KiB | March 02 2021 / March 04 2021 |
TMR-A9WT_Label Position LABEL, Bottom Side of Product Sony Home Entertainment & Sound Products Inc. 1
1 2 3 | 02 FCC Authorization Letter-simple format | Cover Letter(s) | 19.55 KiB | March 02 2021 / March 04 2021 |
Sony Global Manufacturing & Operations Corporation Date: January 6, 2021 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: Sony Corporation FCC ID: AK8TMRA9WT To whom it may concern:
We, the undersigned, hereby authorize Akiko Nishimura of Consumer Technology Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely Yours, Hideo Nomura Sony Global Manufacturing & Operations Corporation
1 2 3 | 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 29.53 KiB | March 02 2021 / March 04 2021 |
Sony Global Manufacturing & Operations Corporation Request for Confidentiality Date: January 6, 2021 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant : Sony Corporation FCC ID : AK8TMRA9WT To whom it may concern:
Please be advised that the following information is to be held confidential on behalf of us, referring to the FCC rules 0.457 and 0.459:
Block Diagram Theory of Operation Schematics The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Hideo Nomura Sony Global Manufacturing & Operations Corporation
1 2 3 | 02 FCC Request for Short-term Confidentiality Letter | Cover Letter(s) | 20.03 KiB | March 02 2021 / March 04 2021 |
Sony Global Manufacturing & Operations Corporation Request for Short-Term Confidentiality Date: January 6, 2021 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID : AK8TMRA9WT Applicant : Sony Corporation To whom it may concern:
Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of Equipment Authorization and behalf of us, referring to the FCC rules 0.457 and 0.459:
External Photos Internal Photos Test Setup Photos User Manual The application contains technical information, which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, ____________________________________ Hideo Nomura Sony Global Manufacturing & Operations Corporation
1 2 3 | 02 FCC Special Power of Attorney | Cover Letter(s) | 81.65 KiB | March 02 2021 / March 04 2021 |
Sony Corporation Special Power of Attorney I, Kazuyuki Hori of Sony Corporation, hereby appoint Hideo Nomura of Sony Global Manufacturing & Operations Corporation to represent me to act on my behalf to do any and all of the following. Sign on my behalf the agency, anti-drug and confidentiality cover letters and apply to FCC for the products. The rights, powers and authority in fact to exercise any and all of the rights and powers herein granted shall Manufacturing & commence and be in full force from December 1, 2020 and continue to be effective unless specifically terminated by either party. Dated December 1, 2020 Kazuyuki Hori Company: Sony Corporation Country: Japan
1 2 3 | 03 Short-Term Confidential FCC Test Setup Photo DSS Module-A | Test Setup Photos | 623.18 KiB | March 02 2021 / September 01 2021 | delayed release |
1 2 3 | 03 Short-Term Confidential FCC Test Setup Photo DTS Module-A | Test Setup Photos | 828.27 KiB | March 02 2021 / September 01 2021 | delayed release |
1 2 3 | 03 Short-Term Confidential FCC Test Setup Photo DFS Module-A | Test Setup Photos | 719.62 KiB | March 02 2021 / September 01 2021 | delayed release |
1 2 3 | 03 Short-Term Confidential FCC Test Setup Photo DFS Module-B | Test Setup Photos | 553.05 KiB | March 02 2021 / September 01 2021 | delayed release |
1 2 3 | 03 Short-Term Confidential FCC Test Setup Photo NII Module-A | Test Setup Photos | 1.42 MiB | March 02 2021 / September 01 2021 | delayed release |
1 2 3 | 03 Short-Term Confidential FCC Test Setup Photo NII Module-B | Test Setup Photos | 1.41 MiB | March 02 2021 / September 01 2021 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-03-04 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System | ||
3 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2021-03-04
|
||||
1 2 3 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 2 3 | FCC Registration Number (FRN) |
0003739166
|
||||
1 2 3 | Physical Address |
1-7-1 Konan Minato-ku
|
||||
1 2 3 |
1-7-1 Konan
|
|||||
1 2 3 |
Tokyo, N/A
|
|||||
1 2 3 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
L******@ul.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
AK8
|
||||
1 2 3 | Equipment Product Code |
TMRA9WT
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
K****** H********
|
||||
1 2 3 | Title |
Chief EMC/RF Compliance Specialist
|
||||
1 2 3 | Telephone Number |
81-50********
|
||||
1 2 3 | Fax Number |
81-50********
|
||||
1 2 3 |
q******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
UL Japan, Inc.
|
||||
1 2 3 | Name |
T****** I****
|
||||
1 2 3 | Physical Address |
1-22-3 Megumigaoka, Hiratsuka-shi
|
||||
1 2 3 |
Kanagawa-ken, 259-1220
|
|||||
1 2 3 |
Japan
|
|||||
1 2 3 | Telephone Number |
81-46********
|
||||
1 2 3 | Fax Number |
81-46********
|
||||
1 2 3 |
T******@ul.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/01/2021 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CONTROL BOX | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 3 | Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 1 MHz and 2 MHz bandwidth modes for Bluetooth Low Energy. | |||||
1 2 3 | Output power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements as both master and slave device. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
UL Japan, Inc.
|
||||
1 2 3 | Name |
I****** I******
|
||||
1 2 3 | Telephone Number |
81-46********
|
||||
1 2 3 | Fax Number |
81-46********
|
||||
1 2 3 |
I******@ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0043000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2412 | 2462 | 0.494 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 2402 | 2480 | 0.0042 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | CC MO | 5180 | 5320 | 0.0197 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | CC MO | 5500 | 5720 | 0.0188 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | CC MO | 5745 | 5825 | 0.0186 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC