| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 |
|
User Manual | Users Manual | 742.17 KiB | June 03 2013 | |||
| 1 2 |
|
User Manual-UPdate | Users Manual | 724.53 KiB | / July 03 2013 | |||
| 1 2 | Cover Letter(s) | July 03 2013 | ||||||
| 1 2 | Cover Letter(s) | July 03 2013 | ||||||
| 1 2 | Cover Letter(s) | July 03 2013 | ||||||
| 1 2 | RF Exposure Info | July 03 2013 | ||||||
| 1 2 | RF Exposure Info | July 03 2013 | ||||||
| 1 2 | Test Setup Photos | July 03 2013 | ||||||
| 1 2 | RF Exposure Info | July 03 2013 | ||||||
| 1 2 | Attestation Statements | June 03 2013 | ||||||
| 1 2 | External Photos | June 03 2013 | ||||||
| 1 2 | Internal Photos | June 03 2013 | ||||||
| 1 2 | Cover Letter(s) | June 03 2013 | ||||||
| 1 2 | ID Label/Location Info | June 03 2013 | ||||||
| 1 2 | ID Label/Location Info | June 03 2013 | ||||||
| 1 2 | RF Exposure Info | June 03 2013 | ||||||
| 1 2 | Cover Letter(s) | June 03 2013 | ||||||
| 1 2 | Test Report | June 03 2013 | ||||||
| 1 2 | Test Setup Photos | June 03 2013 |
| 1 2 | User Manual | Users Manual | 742.17 KiB | June 03 2013 |
4-460-179-11(1) Owners Record The model and serial numbers are located on the rear of the receiver (under the belt clip). Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. NTM-DA1 Serial No. Model No. AC-P5004 Serial No. For customers who purchased this product in the USA Please register this product on line at http://www.sony.com/productregistration. Proper registration will enable us to send you periodic mailings about new products, services, and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you. Digital Audio Nursery Monitor Operating Instructions WARNING Observe the following cautions, as there may be a risk of heat generation, fire or explosion.
* Nickel Metal Hydride battery is built into the product. Charge the product by the designated charging method. Do not place the product in or near fire, or put the product in a microwave. Do not leave the product in a car in hot weather. Do not store or use the product in a hot and humid place such as in a sauna bath. Do not disassemble, crush or pierce the product. Do not expose the product to excessive shock such as dropping from a high place. Do not expose the product to high temperatures above 60C (140F). Keep the product dry. Dispose of the product appropriately. Charge the product by the designated charging method in the instruction manual. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. CAUTION Precautions on Usage
[ T E N T A T I V E ]
2013 Sony Corporation Printed in China NTM-DA1 http://www.sony.net/
To reduce fire or shock hazard, do not expose the unit to rain or moisture. For the customers in the U.S.A. IMPORTANT SAFETY INSTRUCTIONS
-SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet. STRANGULATION HAZARD Children have STRANGLED in cords. Keep the cord out of the reach of children (more than 0.9m (3ft) away). Do not remove the tag on the cord. To prevent cord entanglement and strangulation:
Do not place the transmitter or AC adaptor cord within reach of children. Do not place the transmitter or AC adaptor cord in, or attach it to, a crib or playpen. Fasten the AC adaptor cord of the transmitter on the wall with cord clips (not supplied). Never use extension cords with AC adaptors. Use only AC adaptors provided. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. This Transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. NTM-DA1 has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. Precautions Safety Precautions Operate the transmitter and receiver on 5V DC. To operate them from house current, use only the supplied AC adaptors; do not use any other type. Place the transmitter more than 0.9m (3ft) away from your child. Should any solid object or liquid fall into the unit, disconnect the AC adaptor after turning the unit is power off and have the unit checked by qualified personnel before operating it any further. Notes on the AC adaptor Connect the AC adaptor to a nearby easily accessible wall outlet. If trouble occurs while the adaptor is in use, immediately set the Power/VOICE ACT switch of the receiver to OFF and disconnect the AC adaptor from the wall outlet. And also set the Power switch of the transmitter to OFF and disconnect the AC adaptor from the wall outlet. The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. If you are not going to use the Digital Audio Nursery Monitor for a long time, disconnect both the transmitter and receiver from the wall outlet by pulling out the AC adaptors. If you have any questions or problems concerning your Digital Audio Nursery Monitor, please consult your nearest Sony dealer. This product cannot replace responsible adult supervision of a child. It is designed to assist adults in child supervision. Do not use it for medical monitoring of a sick baby or child. The transmitter detects normal sound levels within a range of 2 to 3m (6 to 10feet) from your child. If the child moves outside of this range, it may not be able to detect sounds from him or her. The transmission range between the transmitter and receiver is up to 270m (900feet) (Line of Sight). It is essential that you check the transmission range and condition of the Digital Audio Nursery Monitor on initial installation, and on a regular basis after that. Stay close to the receiver in order to hear normal sounds from it. Check the volume regularly to ensure that it is set high enough. The sensitivity of the Digital Audio Nursery Monitor can be affected by other devices using 2.4GHz frequency, such as a wireless LAN device, a cordless telephone, or a microwave oven, that may be used near the transmitter and receiver. Using such devices may shorten the transmission range and cause sounds to be distorted. Avoid placing the transmitter and receiver near heat sources or where they are subject to direct sunlight, excessive dust, moisture, or mechanical shock. Cautions on Water-resistance (for the receiver only) The receiver is designed so that it can be used with slight exposure to water, rain, snow and other forms of moisture, but there are several points on which caution should be observed. Do not allow the receiver to come into contact with large amounts of water. Do not immerse the receiver in water. If the receiver is dropped into water, set the Power/
VOICE ACT switch to OFF immediately and disconnect the power cord. Do not use it any more and consult your nearest Sony dealer. If the receiver get wet, wipe it off with a dry cloth. Do not pour cold or hot water directly from a faucet or hose onto the product, as it is not of waterproof. If you use the product near water, close the waterproof cover of the DC IN 5V jack firmly. If it is left open, moisture may get inside the product and may cause a malfunction. If moisture has getten inside the product, some may remain in its openings. Shake the product lightly to shed water then wipe the surface. If not, the remaining water will spill out when you move the product. Specifications Frequency: Digital 2.4 GHz Transmitting Distance: Approx. 270 m (900 feet) (Line of Sight) Transmitter Power requirement: AC adaptor (DC IN 5 V jack): 100 V-240 V AC, 50 Hz/60 Hz Dimensions:
Normal position Approx. 53 mm 62.3 mm 56.1 mm (w/h/d)
(2 1/8 in. 2 1/2 in. 2 1/4 in.) incl. projecting parts When mounting on the wall Approx. 53 mm 45.1 mm 70.3 mm (w/h/d)
(2 1/8 in. 1 13/16 in. 2 7/8 in.) incl. projecting parts Mass: Approx. 41 g (1.45 oz) Power consumption:
At the maximum load: ## W (IR LED On) Normal mode: ## W (IR LED Off) Receiver Power requirement: AC adaptor (DC IN 5 V jack): 100 V-240 V AC, 50 Hz/60 Hz Audio power output:
0.65 W Speaker: 28 mm dia., 8 Dimensions:
When the stand is closed Approx. 51.1 mm 99.1 mm 36.1 mm (w/h/d)
(2 1/8 in. 4 in. 1 7/16 in.) incl. projecting parts When the stand is open Approx. 51.1 mm 97.7 mm 69.5 mm (w/h/d)
(2 1/8 in. 3 7/8 in. 2 3/4 in.) incl. projecting parts Mass: Approx. 100 g (3.53 oz) Operating temperature: 0 C - 40 C (32 F - 104 F) Power consumption:
At the maximum load: ## W Normal mode *: ## W
* When operated with the medium volume level, and Voice Activation off AC adaptor:
Input: 100 V - 240 V AC, 50 Hz/60 Hz, 0.3 A Output: DC 5 V/0.4 A Dimensions:
Approx. 63mm 26.8mm 44mm (w/h/d)
(2 1/2 in. 1 1/16 in. 1 3/4 in.) excl. projecting parts Mass: Approx. 71 g (2.5 oz) Design and specifications are subject to change without notice. NTM-DA1 4-460-179-11(1) Installation Transmitter Power switch Power indicator light Microphone 5.7 mm 6.5 mm
(7/32 in. 17/64 in.) 3.1 mm 3.5 mm
(1/8 in. 9/64 in.) 2.3 mm 2.5 mm
(3/32 in. 7/64 in.) More than 20 mm
(More than 25/32 in.) 1 Screw the screw into the wall. Be sure the screw protrude between 2.5mm and 3mm (1/8in.) from the surface of the wall. 2 Hold the transmitter and turn it until it clicks. Mounting the transmitter on a wall A screw is not supplied. Prepare commercially available screw (diameter: 3.1 mm to 3.5 mm
(1/8 in. to 9/64 in.), length: more than 20 mm (25/32 in.)) suitable for the mounting hole at the bottom of the transmitter. Built-in battery (Receiver only) When the receiver is connected to the AC adaptor and the built-in battery has discharged to a certain level, the built-in battery starts charging automatically and is charged up to full charge. DC IN 5 V jack Base Receiver BATT/CHG
(Battery/Charge) indicator light RANGE ALM
(Range alarm) indicator light Power/VOICE ACT switch Waterproof cover*/
DC IN 5 V jack Built-in Stand/
Belt clip VOLUME control VOLUME indicator SOUND LEVEL indicator lights Speaker Strap hole 3 Mount the transmitter on the screw. Between 2.5 mm and 3 mm (1/8 in.) CAUTION The transmitter clicks when it is turned to the maximum angle. Do not try to turn it any further. When mounting the transmitter on a wall, use the screw suitable to the wall material or strength. Attaching screw may damage the wall. Attach the screw firmly to a pillar or a stud in a wall, if possible. Connect the AC adaptor cord to the transmitter, mount the transmitter on the wall, then connect the AC adaptor to a wall outlet. Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. Fasten the screw securely so that the transmitter does not fall off the wall.
* If you use the product near water, close the waterproof cover of the DC IN 5V jack firmly. If it is left open, moisture may get inside the product and may cause a malfunction. Indicator information (Receiver only) Receiver (when using it with the AC adaptor) BATT/CHG indicator light Off: power off/ Green: power on/ Orange: charging/ Flashing in red: low battery RANGE ALM indicator light Red: indicates the receiver has been moved out of the reception range. SOUND LEVEL indicator lights Red: indicates the input sound volume level from the transmitter (off [low] to 3
[high]). 3 1, 2 2 In the box Transmitter (1) Receiver (1) AC adaptors (2) Operating Instructions (this sheet) Tip The same AC adaptor is supplied for the transmitter and the receiver. Transmitter 1 Open the waterproof cover of the DC IN 5V jack. 2 Connect the supplied AC adaptor to the DC IN 5V jack and plug it into a wall outlet. 3 Open the stand, and adjust the receiver angle. Notes Place the receiver on a stable surface. If the receiver is placed on an unstable surface or in an inclined position, it may fall or topple over, and may cause injury. Adjust the receiver angle until it is stable. If you incline the receiver too much, the it may topple over. Carrying the receiver When you carry the receiver by hanging it on your neck or attaching it to your belt, the receiver operates on the built-in battery. The BATT/CHG indicator light will show the remaining battery power. Attaching a strap to the receiver More than 0.9 m (3 ft) Place the transmitter more than 0.9m (3feet) away from your child. 1 Connect the supplied AC adaptor to the DC IN 5V jack and plug it into a wall outlet. Notes The transmitter clicks when it is turned to the maximum angle. Do not try to turn it any further. Do not place the transmitter or the AC adaptor cord within reach of children. Do not place the transmitter or the AC adaptor cord in, or attach it to, a crib or playpen. Never use extension cords with the AC adaptor. Use only the AC adaptor provided. Make sure that the transmitter is not covered or obstructed in picking up sounds. Note No strap is supplied. Use a strap of sufficient strength. Attaching the receiver to your belt Belt Note If you attach the receiver to your belt using the belt clip, handle it carefully to avoid dropping it. Using the Voice Activation function The VOICE Activation function eliminates most background noise when the receiver does not detect any sound. This function is usable when it is not required for the receiver to constantly check for sounds from the nursery, such as when the baby is sleeping quietly or the parents are sleeping. 1 Set the power/VOICE ACT switch to VOICE ACT to turn the function on. The SOUND LEVEL indicator lights on the receiver turn on according to the sound level from the transmitter (0 [low] to 3 [high] indicators from the left). Tips If no sound is detected, no SOUND LEVEL indicator lights turn on. If the sound is very loud, all 3 indicator lights turn on. You can also hear sound from the speaker. Troubleshooting Should any problem persist after you have made the following checks, consult your nearest Sony dealer. For checking or repairing the Digital Audio Nursery Monitor, the Sony dealer must have your transmitter and receiver together, even if only one of them seems to have a problem. No sound The AC adaptor is disconnected from the wall outlet. The battery of the receiver is used up. The receiver is too far from the transmitter. Volume is low. (The volume is turned down.) In quiet surroundings, the power/VOICE ACT switch of the receiver is set to the VOICE ACT position. Too much noise The receiver is too far from the transmitter. Interference from another device (microwave oven, Wi-Fi device, Bluetooth device, etc.) using 2.4GHz frequency. Turn off the device, or move it further from the transmitter and receiver. Weak reception The transmitting distance of the radio is 270m (900ft) in the line of sight, however, it may be shortened by obstructions between the transmitter and the receiver, such as walls or furniture. Change the location of the transmitter and receiver so that they are close to each other. Feedback noise The receiver is too close to the transmitter. Volume is too high. The alarm sounds The transmitter is not turned on. The receiver is too far from the transmitter. There is an obstruction between the transmitter and the receiver. The battery charge is getting low. Warning alarm The receiver sounds the warning alarm in the following cases. Take appropriate action, according to the alarm. When the receiver is moved out of the reception range:
The receiver sounds 4 beeps per second consecutively. The RANGE ALM indicator light turns in red. Move the receiver closer to the transmitter. When the power of the built-in battery of the receiver is running out:
If the battery power is getting low, the receiver sounds 3 beeps per second 3times. If you continue using the receiver, the receiver sounds a beep for several seconds then turns off automatically. Connect the receiver to the AC adaptor. When the problem indicated by the alarm is corrected, the alarm stops automatically. If you want to turn off the alarm, set the power/VOICE ACT switch to OFF to turn off the receiver. Notes You cannot adjust the alarm volume. There is no setting allowing you to disable the alarm function. Battery life It will last about 20hours after it has been fully charged (when operated with the medium volume level, and Voice Activation off). Charging duration About 9 hours are required to charge the empty battery to its full capacity, in an ambient temperature of 25 C (77 F). Charging may take longer, depending on whether or not the receiver is turned on and other ambient conditions. Checking the remaining battery power When the battery power is getting low, a beep sounds and BATT/CHG indicator light of the receiver flashes red. Notes If you consume the battery power completely and leave it like that, the battery life may be affected. Charge the battery by connecting it to the AC adaptor as soon as it has been used up. Even if you do not intend to use the receiver for a long period, charge the battery to its full capacity once every 6months to maintain its performance. Setting up Turning on the power Transmitter Receiver Power switch Power/VOICE ACT switch 1 Set the power switch of the transmitter to ON. 2 Set the power/VOICE ACT switch of the receiver to ON or VOICE ACT. You will hear sound from the speaker. Notes When the receiver is turned on while the transmitter is not on, an alarm sounds in the receiver as no signal can be transmitted. We recommend turning the transmitter on first. Do not turn the power on when the receiver is close to the transmitter. Feedback noise will be generated. Tips According to the level of sound detected by the microphone of the transmitter, more SOUND LEVEL indicator lights
(up to 3 lights) turn on in red. The receiver sounds an alarm when it is moved out of the transmission range. Turning off the power 1 Set the power/VOICE ACT switch of the receiver to OFF. 2 Set the power switch of the transmitter to OFF. Customizing the Digital Audio Nursery Monitor Adjusting the volume The volume of the sounds you receive varies depending on the loudness of the babys voice, distance between the transmitter and the baby, direction of the built-in microphone of the transmitter, obstructions, etc. Set the volume as required using the VOLUME control. If the volume level is set too high and is accompanied by a shrill noise, reduce the volume. To increase sound volume, turn the VOLUME control downward. The green area of the VOLUME indicator is extended. To decrease sound volume, turn the VOLUME control upward. The green area of the VOLUME indicator is reduced. The sound volumes decreased. VOLUME indicator
(Green) Note The SOUND LEVEL indicator lights turn on according to the input sound level received from the transmitter. The level setting of the VOLUME control does not affect it. The sound volumes increased. VOLUME control
[ T E N T A T I V E ]
NTM-DA1 4-460-179-11(1)
| 1 2 | User Manual-UPdate | Users Manual | 724.53 KiB | / July 03 2013 |
4-460-179-11(1) Owners Record The model and serial numbers are located on the rear of the receiver (under the belt clip). Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. NTM-DA1 Serial No. Model No. AC-P5004 Serial No. For customers who purchased this product in the USA Please register this product on line at http://www.sony.com/productregistration. Proper registration will enable us to send you periodic mailings about new products, services, and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you. Digital Audio Nursery Monitor Operating Instructions WARNING Observe the following cautions, as there may be a risk of heat generation, fire or explosion.
* Nickel Metal Hydride battery is built into the product. Charge the product by the designated charging method. Do not place the product in or near fire, or put the product in a microwave. Do not leave the product in a car in hot weather. Do not store or use the product in a hot and humid place such as in a sauna bath. Do not disassemble, crush or pierce the product. Do not expose the product to excessive shock such as dropping from a high place. Do not expose the product to high temperatures above 60C (140F). Keep the product dry. Dispose of the product appropriately. Charge the product by the designated charging method in the instruction manual. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. CAUTION Precautions on Usage
[ T E N T A T I V E ]
2013 Sony Corporation Printed in China NTM-DA1 http://www.sony.net/
To reduce fire or shock hazard, do not expose the unit to rain or moisture. For the customers in the U.S.A. IMPORTANT SAFETY INSTRUCTIONS
-SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet. STRANGULATION HAZARD Children have STRANGLED in cords. Keep the cord out of the reach of children (more than 0.9m (3ft) away). Do not remove the tag on the cord. To prevent cord entanglement and strangulation:
Do not place the transmitter or AC adaptor cord within reach of children. Do not place the transmitter or AC adaptor cord in, or attach it to, a crib or playpen. Fasten the AC adaptor cord of the transmitter on the wall with cord clips (not supplied). Never use extension cords with AC adaptors. Use only AC adaptors provided. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. This Transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. NTM-DA1 has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. Precautions Safety Precautions Operate the transmitter and receiver on 5V DC. To operate them from house current, use only the supplied AC adaptors; do not use any other type. Place the transmitter more than 0.9m (3ft) away from your child. Should any solid object or liquid fall into the unit, disconnect the AC adaptor after turning the unit is power off and have the unit checked by qualified personnel before operating it any further. Notes on the AC adaptor Connect the AC adaptor to a nearby easily accessible wall outlet. If trouble occurs while the adaptor is in use, immediately set the Power/VOICE ACT switch of the receiver to OFF and disconnect the AC adaptor from the wall outlet. And also set the Power switch of the transmitter to OFF and disconnect the AC adaptor from the wall outlet. The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. If you are not going to use the Digital Audio Nursery Monitor for a long time, disconnect both the transmitter and receiver from the wall outlet by pulling out the AC adaptors. If you have any questions or problems concerning your Digital Audio Nursery Monitor, please consult your nearest Sony dealer. This product cannot replace responsible adult supervision of a child. It is designed to assist adults in child supervision. Do not use it for medical monitoring of a sick baby or child. The transmitter detects normal sound levels within a range of 2 to 3m (6 to 10feet) from your child. If the child moves outside of this range, it may not be able to detect sounds from him or her. The transmission range between the transmitter and receiver is up to 270m (900feet) (Line of Sight). It is essential that you check the transmission range and condition of the Digital Audio Nursery Monitor on initial installation, and on a regular basis after that. Stay close to the receiver in order to hear normal sounds from it. Check the volume regularly to ensure that it is set high enough. The sensitivity of the Digital Audio Nursery Monitor can be affected by other devices using 2.4GHz frequency, such as a wireless LAN device, a cordless telephone, or a microwave oven, that may be used near the transmitter and receiver. Using such devices may shorten the transmission range and cause sounds to be distorted. Avoid placing the transmitter and receiver near heat sources or where they are subject to direct sunlight, excessive dust, moisture, or mechanical shock. Cautions on Water-resistance (for the receiver only) The receiver is designed so that it can be used with slight exposure to water, rain, snow and other forms of moisture, but there are several points on which caution should be observed. Do not allow the receiver to come into contact with large amounts of water. Do not immerse the receiver in water. If the receiver is dropped into water, set the Power/
VOICE ACT switch to OFF immediately and disconnect the power cord. Do not use it any more and consult your nearest Sony dealer. If the receiver get wet, wipe it off with a dry cloth. Do not pour cold or hot water directly from a faucet or hose onto the product, as it is not of waterproof. If you use the product near water, close the waterproof cover of the DC IN 5V jack firmly. If it is left open, moisture may get inside the product and may cause a malfunction. If moisture has getten inside the product, some may remain in its openings. Shake the product lightly to shed water then wipe the surface. If not, the remaining water will spill out when you move the product. Specifications Frequency: Digital 2.4 GHz Transmitting Distance: Approx. 270 m (900 feet) (Line of Sight) Transmitter Power requirement: AC adaptor (DC IN 5 V jack): 100 V-240 V AC, 50 Hz/60 Hz Dimensions:
Normal position Approx. 53 mm 62.3 mm 56.1 mm (w/h/d)
(2 1/8 in. 2 1/2 in. 2 1/4 in.) incl. projecting parts When mounting on the wall Approx. 53 mm 45.1 mm 70.3 mm (w/h/d)
(2 1/8 in. 1 13/16 in. 2 7/8 in.) incl. projecting parts Mass: Approx. 41 g (1.45 oz) Power consumption:
At the maximum load: ## W (IR LED On) Normal mode: ## W (IR LED Off) Receiver Power requirement: AC adaptor (DC IN 5 V jack): 100 V-240 V AC, 50 Hz/60 Hz Audio power output:
0.65 W Speaker: 28 mm dia., 8 Dimensions:
When the stand is closed Approx. 51.1 mm 99.1 mm 36.1 mm (w/h/d)
(2 1/8 in. 4 in. 1 7/16 in.) incl. projecting parts When the stand is open Approx. 51.1 mm 97.7 mm 69.5 mm (w/h/d)
(2 1/8 in. 3 7/8 in. 2 3/4 in.) incl. projecting parts Mass: Approx. 100 g (3.53 oz) Operating temperature: 0 C - 40 C (32 F - 104 F) Power consumption:
At the maximum load: ## W Normal mode *: ## W
* When operated with the medium volume level, and Voice Activation off AC adaptor:
Input: 100 V - 240 V AC, 50 Hz/60 Hz, 0.3 A Output: DC 5 V/0.4 A Dimensions:
Approx. 63mm 26.8mm 44mm (w/h/d)
(2 1/2 in. 1 1/16 in. 1 3/4 in.) excl. projecting parts Mass: Approx. 71 g (2.5 oz) Design and specifications are subject to change without notice. NTM-DA1 4-460-179-11(1) Installation Transmitter Power switch Power indicator light Microphone 5.7 mm 6.5 mm
(7/32 in. 17/64 in.) 3.1 mm 3.5 mm
(1/8 in. 9/64 in.) 2.3 mm 2.5 mm
(3/32 in. 7/64 in.) More than 20 mm
(More than 25/32 in.) 1 Screw the screw into the wall. Be sure the screw protrude between 2.5mm and 3mm (1/8in.) from the surface of the wall. 2 Hold the transmitter and turn it until it clicks. Mounting the transmitter on a wall A screw is not supplied. Prepare commercially available screw (diameter: 3.1 mm to 3.5 mm
(1/8 in. to 9/64 in.), length: more than 20 mm (25/32 in.)) suitable for the mounting hole at the bottom of the transmitter. Built-in battery (Receiver only) When the receiver is connected to the AC adaptor and the built-in battery has discharged to a certain level, the built-in battery starts charging automatically and is charged up to full charge. DC IN 5 V jack Base Receiver BATT/CHG
(Battery/Charge) indicator light RANGE ALM
(Range alarm) indicator light Power/VOICE ACT switch Waterproof cover*/
DC IN 5 V jack Built-in Stand/
Belt clip VOLUME control VOLUME indicator SOUND LEVEL indicator lights Speaker Strap hole 3 Mount the transmitter on the screw. Between 2.5 mm and 3 mm (1/8 in.) CAUTION The transmitter clicks when it is turned to the maximum angle. Do not try to turn it any further. When mounting the transmitter on a wall, use the screw suitable to the wall material or strength. Attaching screw may damage the wall. Attach the screw firmly to a pillar or a stud in a wall, if possible. Connect the AC adaptor cord to the transmitter, mount the transmitter on the wall, then connect the AC adaptor to a wall outlet. Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. Fasten the screw securely so that the transmitter does not fall off the wall.
* If you use the product near water, close the waterproof cover of the DC IN 5V jack firmly. If it is left open, moisture may get inside the product and may cause a malfunction. Indicator information (Receiver only) Receiver (when using it with the AC adaptor) BATT/CHG indicator light Off: power off/ Green: power on/ Orange: charging/ Flashing in red: low battery RANGE ALM indicator light Red: indicates the receiver has been moved out of the reception range. SOUND LEVEL indicator lights Red: indicates the input sound volume level from the transmitter (off [low] to 3
[high]). 3 1, 2 2 In the box Transmitter (1) Receiver (1) AC adaptors (2) Operating Instructions (this sheet) Tip The same AC adaptor is supplied for the transmitter and the receiver. Transmitter 1 Open the waterproof cover of the DC IN 5V jack. 2 Connect the supplied AC adaptor to the DC IN 5V jack and plug it into a wall outlet. 3 Open the stand, and adjust the receiver angle. Notes Place the receiver on a stable surface. If the receiver is placed on an unstable surface or in an inclined position, it may fall or topple over, and may cause injury. Adjust the receiver angle until it is stable. If you incline the receiver too much, the it may topple over. Carrying the receiver When you carry the receiver by hanging it on your neck or attaching it to your belt, the receiver operates on the built-in battery. The BATT/CHG indicator light will show the remaining battery power. Attaching a strap to the receiver More than 0.9 m (3 ft) Place the transmitter more than 0.9m (3feet) away from your child. 1 Connect the supplied AC adaptor to the DC IN 5V jack and plug it into a wall outlet. Notes The transmitter clicks when it is turned to the maximum angle. Do not try to turn it any further. Do not place the transmitter or the AC adaptor cord within reach of children. Do not place the transmitter or the AC adaptor cord in, or attach it to, a crib or playpen. Never use extension cords with the AC adaptor. Use only the AC adaptor provided. Make sure that the transmitter is not covered or obstructed in picking up sounds. Note No strap is supplied. Use a strap of sufficient strength. Attaching the receiver to your belt Belt Note If you attach the receiver to your belt using the belt clip, handle it carefully to avoid dropping it. Using the Voice Activation function The VOICE Activation function eliminates most background noise when the receiver does not detect any sound. This function is usable when it is not required for the receiver to constantly check for sounds from the nursery, such as when the baby is sleeping quietly or the parents are sleeping. 1 Set the power/VOICE ACT switch to VOICE ACT to turn the function on. The SOUND LEVEL indicator lights on the receiver turn on according to the sound level from the transmitter (0 [low] to 3 [high] indicators from the left). Tips If no sound is detected, no SOUND LEVEL indicator lights turn on. If the sound is very loud, all 3 indicator lights turn on. You can also hear sound from the speaker. Troubleshooting Should any problem persist after you have made the following checks, consult your nearest Sony dealer. For checking or repairing the Digital Audio Nursery Monitor, the Sony dealer must have your transmitter and receiver together, even if only one of them seems to have a problem. No sound The AC adaptor is disconnected from the wall outlet. The battery of the receiver is used up. The receiver is too far from the transmitter. Volume is low. (The volume is turned down.) In quiet surroundings, the power/VOICE ACT switch of the receiver is set to the VOICE ACT position. Too much noise The receiver is too far from the transmitter. Interference from another device (microwave oven, Wi-Fi device, Bluetooth device, etc.) using 2.4GHz frequency. Turn off the device, or move it further from the transmitter and receiver. Weak reception The transmitting distance of the radio is 270m (900ft) in the line of sight, however, it may be shortened by obstructions between the transmitter and the receiver, such as walls or furniture. Change the location of the transmitter and receiver so that they are close to each other. Feedback noise The receiver is too close to the transmitter. Volume is too high. The alarm sounds The transmitter is not turned on. The receiver is too far from the transmitter. There is an obstruction between the transmitter and the receiver. The battery charge is getting low. Warning alarm The receiver sounds the warning alarm in the following cases. Take appropriate action, according to the alarm. When the receiver is moved out of the reception range:
The receiver sounds 4 beeps per second consecutively. The RANGE ALM indicator light turns in red. Move the receiver closer to the transmitter. When the power of the built-in battery of the receiver is running out:
If the battery power is getting low, the receiver sounds 3 beeps per second 3times. If you continue using the receiver, the receiver sounds a beep for several seconds then turns off automatically. Connect the receiver to the AC adaptor. When the problem indicated by the alarm is corrected, the alarm stops automatically. If you want to turn off the alarm, set the power/VOICE ACT switch to OFF to turn off the receiver. Notes You cannot adjust the alarm volume. There is no setting allowing you to disable the alarm function. Battery life It will last about 20hours after it has been fully charged (when operated with the medium volume level, and Voice Activation off). Charging duration About 9 hours are required to charge the empty battery to its full capacity, in an ambient temperature of 25 C (77 F). Charging may take longer, depending on whether or not the receiver is turned on and other ambient conditions. Checking the remaining battery power When the battery power is getting low, a beep sounds and BATT/CHG indicator light of the receiver flashes red. Notes If you consume the battery power completely and leave it like that, the battery life may be affected. Charge the battery by connecting it to the AC adaptor as soon as it has been used up. Even if you do not intend to use the receiver for a long period, charge the battery to its full capacity once every 6months to maintain its performance. Setting up Turning on the power Transmitter Receiver Power switch Power/VOICE ACT switch 1 Set the power switch of the transmitter to ON. 2 Set the power/VOICE ACT switch of the receiver to ON or VOICE ACT. You will hear sound from the speaker. Notes When the receiver is turned on while the transmitter is not on, an alarm sounds in the receiver as no signal can be transmitted. We recommend turning the transmitter on first. Do not turn the power on when the receiver is close to the transmitter. Feedback noise will be generated. Tips According to the level of sound detected by the microphone of the transmitter, more SOUND LEVEL indicator lights
(up to 3 lights) turn on in red. The receiver sounds an alarm when it is moved out of the transmission range. Turning off the power 1 Set the power/VOICE ACT switch of the receiver to OFF. 2 Set the power switch of the transmitter to OFF. Customizing the Digital Audio Nursery Monitor Adjusting the volume The volume of the sounds you receive varies depending on the loudness of the babys voice, distance between the transmitter and the baby, direction of the built-in microphone of the transmitter, obstructions, etc. Set the volume as required using the VOLUME control. If the volume level is set too high and is accompanied by a shrill noise, reduce the volume. To increase sound volume, turn the VOLUME control downward. The green area of the VOLUME indicator is extended. To decrease sound volume, turn the VOLUME control upward. The green area of the VOLUME indicator is reduced. The sound volumes decreased. VOLUME indicator
(Green) Note The SOUND LEVEL indicator lights turn on according to the input sound level received from the transmitter. The level setting of the VOLUME control does not affect it. The sound volumes increased. VOLUME control
[ T E N T A T I V E ]
NTM-DA1 4-460-179-11(1)
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2013-03-07 | 2414 ~ 2467 | DSS - Part 15 Spread Spectrum Transmitter | Class II Permissive Change |
| 2 | 2013-03-06 | 2414 ~ 2467 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 | Effective |
2013-03-07
|
||||
| 1 2 |
2013-03-06
|
|||||
| 1 2 | Applicant's complete, legal business name |
Sony Corporation
|
||||
| 1 2 | FCC Registration Number (FRN) |
0003739166
|
||||
| 1 2 | Physical Address |
1-7-1 Konan Minato-ku
|
||||
| 1 2 |
1-7-1 Konan
|
|||||
| 1 2 |
Tokyo, N/A
|
|||||
| 1 2 |
Japan
|
|||||
| app s | TCB Information | |||||
| 1 2 | TCB Application Email Address |
t******@siemic.com
|
||||
| 1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 2 | Grantee Code |
AK8
|
||||
| 1 2 | Equipment Product Code |
NTMDA1T
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 | Name |
R**** T****
|
||||
| 1 2 | Title |
Senior Manager
|
||||
| 1 2 | Telephone Number |
81-50********
|
||||
| 1 2 | Fax Number |
81-50********
|
||||
| 1 2 |
c******@jp.sony.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DIGITAL AUDIO NUSERY MONITOR | ||||
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 2 | Modular Equipment Type | Does not apply | ||||
| 1 2 | Purpose / Application is for | Class II Permissive Change | ||||
| 1 2 | Original Equipment | |||||
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 | Grant Comments | C2PC Listed Power is conducted power. The highest report SAR is 0.57W/kg. | ||||
| 1 2 | Listed Power is conducted power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
| 1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 | Firm Name |
Cerpass Technology (SuZhou) Co., Ltd.
|
||||
| 1 2 | Name |
M**** C****
|
||||
| 1 2 | Telephone Number |
86-05******** Extension:
|
||||
| 1 2 | Fax Number |
86-05********
|
||||
| 1 2 |
m******@cerpass.net
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2414.00000000 | 2467.00000000 | 0.0254100 | ||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 15C | 2414.00000000 | 2467.00000000 | 0.0254100 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC