all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual | Users Manual | 2.30 MiB | February 09 2009 | |||
1 2 3 |
|
User Manual Safety Guide | Users Manual | 893.25 KiB | February 09 2009 | |||
1 2 3 | Cover Letter(s) | February 09 2009 | ||||||
1 2 3 | Cover Letter(s) | February 09 2009 | ||||||
1 2 3 | Attestation Statements | February 09 2009 | ||||||
1 2 3 | External Photos | February 09 2009 | ||||||
1 2 3 | Internal Photos | February 09 2009 | ||||||
1 2 3 | Internal Photos | February 09 2009 | ||||||
1 2 3 | ID Label/Location Info | February 09 2009 | ||||||
1 2 3 | RF Exposure Info | February 09 2009 | ||||||
1 2 3 | RF Exposure Info | February 09 2009 | ||||||
1 2 3 | RF Exposure Info | February 09 2009 | ||||||
1 2 3 | RF Exposure Info | February 09 2009 | ||||||
1 2 3 | RF Exposure Info | February 09 2009 | ||||||
1 2 3 | RF Exposure Info | February 09 2009 | ||||||
1 2 3 | RF Exposure Info | February 09 2009 | ||||||
1 2 3 | Test Setup Photos | February 09 2009 | ||||||
1 2 3 | Cover Letter(s) | February 09 2009 | ||||||
1 2 3 | Test Report | February 09 2009 | ||||||
1 2 3 | Test Report | February 09 2009 | ||||||
1 2 3 | Test Setup Photos | February 09 2009 | ||||||
1 2 3 | Internal Photos | February 09 2009 | ||||||
1 2 3 | Internal Photos | February 09 2009 | ||||||
1 2 3 | Test Report | February 09 2009 | ||||||
1 2 3 | Test Report | February 09 2009 | ||||||
1 2 3 | Internal Photos | February 09 2009 | ||||||
1 2 3 | Internal Photos | February 09 2009 | ||||||
1 2 3 | RF Exposure Info | February 09 2009 | ||||||
1 2 3 | RF Exposure Info | February 09 2009 | ||||||
1 2 3 | RF Exposure Info | February 09 2009 | ||||||
1 2 3 | RF Exposure Info | February 09 2009 | ||||||
1 2 3 | Test Report | February 09 2009 | ||||||
1 2 3 | Test Report | February 09 2009 |
1 2 3 | User Manual | Users Manual | 2.30 MiB | February 09 2009 |
N Operating Instructions - Hardware GuideUser GuideHardware GuideUser GuideOperating Instructions - Hardware GuideUser Guide
2n N Personal Computer VPCX SeriesVPCX SeriesVPCX seriesVPCX SeriesVPCX Series 3n N Contents Before Use.......................................................................... 5 Finding More about Your VAIO Computer .................... 6 Ergonomic Considerations .......................................... 12 Getting Started.................................................................. 15 Locating Controls and Ports........................................ 15 About the Indicator Lights ........................................... 22 Connecting a Power Source ....................................... 23 Using the Battery Pack................................................ 24 Shutting Down Your Computer Safely ........................ 30 Using the Power Saving Modes .................................. 30 Updating Your Computer ............................................ 32 Using Your VAIO Computer.............................................. 33 Using the Keyboard..................................................... 33 Using the Touch Pad................................................... 35 Using the Built-in Camera ........................................... 37 Using "Memory Stick".................................................. 38 Using Other Modules / Memory Cards........................ 43 Using the Internet........................................................ 46 Using the Network (LAN) ............................................ 48 Using the Wireless LAN .............................................. 49 Using the Wireless WAN............................................. 56 Using the Bluetooth Function ...................................... 60 Using the GPS Function ..............................................65 Using Peripheral Devices..................................................67 Connecting an Optical Disc Drive ................................67 Connecting External Speakers or Headphones ..........69 Connecting an External Display ..................................70 Selecting Display Modes .............................................72 Using the Multiple Monitors Function ..........................73 Connecting a USB Device ...........................................74 Customizing Your VAIO Computer....................................76 Setting the Password...................................................76 Using Intel VT ..............................................................82 Using the VAIO Control Center ...................................83 Using the VAIO Power Management...........................84 Precautions .......................................................................86 Safety Information .......................................................86 Care and Maintenance Information .............................90 Handling Your Computer .............................................91 Handling the LCD Screen............................................93 Using the Power Source..............................................94 Handling the Built-in Camera.......................................95 Handling Discs.............................................................95 Using the Battery Pack ................................................96 4n N Handling "Memory Stick"............................................. 97 Handling the Built-in Storage Device .......................... 97 Troubleshooting ................................................................ 99 Computer .................................................................. 100 System Security ........................................................ 109 Battery....................................................................... 110 Built-in Camera ......................................................... 111 Networking ................................................................ 113 Bluetooth Technology ............................................... 117 GPS........................................................................... 121 Display ...................................................................... 122 Printing ...................................................................... 125 Speakers ................................................................... 125 Touch Pad................................................................. 127 Keyboard................................................................... 128 Floppy Disks.............................................................. 128 Audio/Video............................................................... 129 Memory Cards........................................................... 131 Peripherals ................................................................ 132 Trademarks..................................................................... 134 Notice.............................................................................. 140 Before Use >
5n N Before Use Congratulations on your purchase of this Sony VAIO computer, and welcome to the on-screen User Guide. Sony has combined leading-edge technology in audio, video, computing, and communications to provide a state-of-the-art personal computing experience.
External views illustrated in this manual may look slightly different from those of your computer. How to find specifications Some features, options, and supplied items may not be available on your computer. US model_BGN To find out about the configuration of your computer, visit the Sony online support web site at the following URLs:
For customers in USA http://esupport.sony.com/EN/VAIO/
For customers in Canada http://www.sony.ca/support/
For customers in Spanish-speaking Latin American countries or areas http://esupport.sony.com/LA/
For customers in Brazil http://esupport.sony.com/BR/
US model_END Euro model_BGN To find out about the configuration of your computer, visit the VAIO Link web site at http://www.vaio-link.com. Before Use >
Finding More about Your VAIO Computer Euro model_END Except US model_BGN Except Euro_BGN To find out about the configuration of your computer, see the Specifications (supplied with your computer). 6n N Except Euro_END Except US model_END Finding More about Your VAIO Computer This section provides support information about your VAIO computer. 1. Printed Documentation US model_BGN Quick Start Guide An overview of components connection, set-up information, etc. Safety Information Safety guidelines and owner information. US model_END Euro model_BGN Quick Start Guide An overview of components connection, set-up information, etc. Troubleshooting and Recovery Guide Regulations, Guarantee, and Service Support Euro model_END Except US model_BGN Except Euro_BGN Quick Start Guide An overview of components connection, set-up information, etc. Specifications The hardware configurations of your VAIO computer. Before Use >
Finding More about Your VAIO Computer Troubleshooting and Recovery Guide Safety Regulations China model_BGN Warranty Card Approval sheet, etc. China model_END Except Euro_END Except US model_END 2. On-screen Documentation US model_BGN 7n N Help and Support General information and technical assistance for your VAIO computer. To access Help and Support:
1 Click Start 2 Choose from the following categories to find the answers you need. and Help and Support. Get started with my VAIO Get help with Internet and wireless setup, security setup, personalizing your VAIO computer, and creating recovery discs and more. Use my VAIO Access interactive help in the form of VAIO tutorials, how-to articles, the VAIO technology page, specifications, and system and software information. You can find useful documentation such as below:
- VAIO User Guide (This manual)
- VAIO Recovery Center User Guide - Information about restoring individual software programs, hardware drivers, and drive partition(s) or your entire built-in storage device to the original factory settings
- Software Information Before Use >
Finding More about Your VAIO Computer 8n N Troubleshoot my VAIO Maintain and troubleshoot your VAIO computer with VAIO Care, system restore, backup and recovery, and contact Sony support. Program help files May be included with the preinstalled software programs on your computer. You may be able to access the help files from the help menu on a specific program. SmartWi Connection Utility Help Information about setting up Bluetooth, wireless LAN, GPS, and wireless WAN functions. Features and options may not be available on your computer. See the specifications to find out about configuration of your computer. To access this on-screen guide:
1 Click Start, All Programs, and SmartWi Connection Utility. 2 Click SmartWi Connection Utility Help. US model_END Euro model_BGN Except US model_BGN User Guide (This manual) Features of your computer and information about solving common problems. To view this on-screen guide:
1 Click Start, All Programs, and VAIO Documentation. 2 Open the folder for your language. 3 Select the guide you want to read. You can manually browse to the user guides by going to Computer > VAIO (C:) (your C drive) > Documentation > Documentation and opening the folder for your language. Before Use >
Finding More about Your VAIO Computer 9n N Euro model_END Except Euro_BGN VAIO Manual General information and technical assistance for your VAIO computer. To access VAIO Manual, double-click VAIO Manual on the desktop. Except Euro_END Windows Help and Support A comprehensive resource for practical advice, tutorials, and demonstrations to help you learn to use your computer. To access Windows Help and Support, click Start key and press the F1 key. Except US model_END 3. Support Web Sites US model_BGN Sony online support web site and Help and Support, or press and hold the Microsoft Windows The Sony online support web site provides instant access to information on commonly encountered problems. Type a description of the problem and the Knowledge Database searches for the corresponding solutions online. For customers in USA http://esupport.sony.com/EN/VAIO/
For customers in Canada http://www.sony.ca/support/
For customers in Spanish-speaking Latin American countries or areas http://esupport.sony.com/LA/
Before Use >
Finding More about Your VAIO Computer For customers in Brazil http://esupport.sony.com/BR/
Operating system online support web site 10n N Your computer comes preinstalled with a Microsoft Windows operating system. For operating system support, you can visit Microsoft customer support at http://support.microsoft.com/directory/. US model_END Euro model_BGN If you have any problem with the computer, you can visit the VAIO-Link web site at http://www.vaio-link.com for troubleshooting. Before contacting VAIO-Link by telephone, try to solve the problem by reading the supplied documentation and visiting other Sony web sites. For more about VAIO and becoming part of the growing VAIO community, visit the web site at http://www.club-vaio.com. For online purchases, visit the web site at http://www.sonystyle-europe.com. For other Sony products, visit the web site at http://www.sony.net. When you contact VAIO-Link by telephone, have the serial number of your VAIO computer ready at hand. The serial number is located on the bottom, the back panel, or inside the battery compartment of your VAIO computer. Euro model_END GVD model_BGN If you have any problem with the computer, you can visit the following VAIO online web sites for troubleshooting:
http://www.sony-asia.com/support/vaio/ (English) http://scs.sony.co.kr/ (Korean) http://service.sony.com.tw/ (Traditional Chinese) Before Use >
Finding More about Your VAIO Computer 11n N Before contacting VAIO Helpdesk by telephone, try to solve the problem by reading the supplied documentation and visiting other Sony web sites. For other Sony products, visit the web site at http://www.sony.net. For available optional accessories, visit the following web sites:
http://vaio-online.sony.com/ (English) http://vaio-online.sony.co.kr/ (Korean) http://www.sonystyle.com.tw/vaio/ (Traditional Chinese) GVD model_END China model_BGN If you have any problem with the computer, you can visit the VAIO online web sites at http://service.sony.com.cn/vaio/ for troubleshooting. Before contacting VAIO Helpdesk by telephone, try to solve the problem by reading the supplied documentation and visiting other Sony web sites. For other Sony products, visit the web site at http://www.sony.net. For available optional accessories, visit the web site at http://vaio-online.sony.com/cn/. China model_END US model_BGN 4. Customer Information Center If you do not find the information you are looking for at our site, you may call Sony directly. You can find the contact numbers on the Sony online support web site. In order to receive the fastest and most efficient services, have the following information readily available:
1 Your VAIO computer model Before Use >
Ergonomic Considerations 12n N You can find it at the lower right corner of the display on the computer. 2 Your computer's serial number You can find it on the bottom, the back panel, or inside the battery compartment of your Sony VAIO computer. The serial number is the last 7 digits of the number below the barcode. 3 The operating system on your computer 4 The hardware component or the software program that is causing the problem 5 A brief description of the problem 5. In Store Service & Support (available in USA only) Make an appointment with a Sony certified technician at a U.S. Sony Style store and get personalized service and support for your VAIO PC. Sony Style Backstage Technicians can assist with the setup of your new VAIO PC, system optimization, data rescue, and any repair service you might need. Visit the web site at www.sonystyle.com/backstage to find the nearest location. US model_END Ergonomic Considerations You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations for both stationary and portable environments:
Before Use >
Ergonomic Considerations 13n N Position of your computer Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard or the pointing device. Let your upper arms hang naturally at your sides. Take frequent breaks while using your computer. Excessive use of the computer may strain eyes, muscles, or tendons. Furniture and posture Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning far backwards. Viewing angle of the computer's display Use the display's tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display as well. Lighting Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect lighting to avoid bright spots on the display. Proper lighting adds to your comfort and work efficiency. Before Use >
Ergonomic Considerations 14n N Positioning an external display When using an external display, set the display at a comfortable viewing distance. Make sure the display screen is at eye level or slightly lower when you are sitting in front of the monitor. Getting Started >
Locating Controls and Ports 15n N Getting Started This section describes how to get started using your VAIO computer. US model_BGN
Before starting your computer for the first time, do not connect any other hardware that did not originally come with your computer. Upon completion, connect one device (for example, a printer, an external hard disk drive, a scanner, and so on) at a time, following the manufacturer's instructions. US model_END Locating Controls and Ports (page 15) About the Indicator Lights (page 22) Connecting a Power Source (page 23) Using the Battery Pack (page 24) Shutting Down Your Computer Safely (page 30) Using the Power Saving Modes (page 30) Updating Your Computer (page 32) Locating Controls and Ports Take a moment to identify the controls and ports shown on the following pages. Getting Started >
Locating Controls and Ports Front 16n N US model_BGN A WIRELESS switch (page 49), (page 60) US model_END GVD model_BGN A WIRELESS switch (page 49), (page 56), (page 60) GVD model_END China model_BGN A WIRELESS switch (page 49), (page 56), (page 60) ON means "ON," and OFF means "OFF."
China model_END Euro model_BGN A WIRELESS switch (page 49), (page 56), (page 60), (page 65) Euro model_END B Built-in microphone (monaural) C Num lock indicator (page 22) D Caps lock indicator (page 22) E Scroll lock indicator (page 22) F LCD screen (page 93) G Power button/Power indicator (page 22) H Keyboard (page 33) I Touch pad (page 35) J Left button (page 35) K Right button (page 35) Getting Started >
Locating Controls and Ports 17n N A Built-in MOTION EYE camera indicator (page 22) B Built-in MOTION EYE camera (page 37) C Charge indicator (page 22) D Disc drive indicator (page 22) E WIRELESS indicator (page 22) F SD memory card slot (page 43) G Media Access indicator (page 22) H "Memory Stick Duo" slot* (page 38)
Your computer supports only Duo-size "Memory Stick". Getting Started >
Locating Controls and Ports Back 18n N A Air vent Getting Started >
Locating Controls and Ports Right 19n N A Network (LAN) port (page 48) Pull the port cover down before using the network (LAN) port. The port cover may disengage if you exert pressure on it when opening it or disconnecting a LAN cable. To attach the port cover, align the cover with the edge (1) of the port and push the cover down until it clicks into place. B Monitor port (page 70) Getting Started >
Locating Controls and Ports Left 20n N A DC IN port (page 23) B Security slot C Hi-Speed USB (USB 2.0) ports* (page 74) D Headphones jack (page 69)
Support high-/full-/low- speeds. Getting Started >
Locating Controls and Ports Bottom 21n N A Tilt feet Unfold the tilt feet to adjust the angle of your computer before using the network (LAN) port and the monitor port. The tilt feet may disengage if you exert pressure on it when unfolding it. To attach the tilt feet, push it down while aligning the projections (1) with the snap-fit joint (2) until it snaps into place. B Built-in speaker (monaural) Except US model_BGN C SIM card slot* (page 56) Except US model_END US model_BGN D SIM card slot*
US model_END E Battery connector (page 24) F Air vent
On selected models only. Getting Started >
About the Indicator Lights About the Indicator Lights Your computer is equipped with the following indicator lights:
22n N IRX-4860_BGN Indicator Power 1 Charge Functions Illuminates in green while the computer is on, blinks slowly in orange while the computer is in Sleep mode, and goes out when the computer is turned off or enters Hibernate mode. Illuminates while the battery pack is charging. See Charging the Battery Pack (page 28) for more information. Built-in MOTION EYE camera Illuminates while the built-in camera is in use. Media Access Disc drive Num lock Caps lock Scroll lock WIRELESS IRX-4860_END Illuminates while data access to a memory card, such as "Memory Stick" and an SD memory card, is in progress. (Do not place the computer into Sleep mode or turn it off while this indicator light is lit.) When the indicator light is unlit, the memory card is not in use. Illuminates while data access to the built-in storage device or the optical disc drive is in progress. Do not place the computer into Sleep mode or turn it off while this indicator light is lit. Press the Num Lk key to activate the numeric keypad. Press it a second time to deactivate the numeric keypad. The numeric keypad is not active when the indicator light is unlit. Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key while the indicator light is lit. Press the key a second time to turn off the indicator light. Normal typing resumes when the Caps lock indicator light is turned off. Press the Fn+Scr Lk keys to change how you scroll the display. Normal scrolling resumes when the Scroll lock indicator light is turned off. The Scr Lk key functions differently depending on the program you are using and does not work with all programs. Illuminates while one or more wireless options are enabled. Getting Started >
Connecting a Power Source Connecting a Power Source Except IRX-4860_BGN 23n N You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer. Except IRX-4860_END IRX-4860_BGN You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer. Before using the computer for the first time, you need to connect an AC adapter to your computer.
The uncharged battery pack is installed on your computer at the time of delivery. Do not use your computer without the battery pack installed as it may cause the computer to malfunction. IRX-4860_END Using the AC Adapter While your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet. Use only the supplied AC adapter for your computer. To use the AC adapter 1 Plug one end of the power cord (1) into the AC adapter (3). 2 Plug the other end of the power cord into an AC outlet (2). 3 Plug the cable from the AC adapter (3) into the DC IN port (4) on the computer. Getting Started >
Using the Battery Pack 24n N
The shape of the DC In plug varies depending on the AC adapter. To disconnect your computer completely from AC power, unplug the AC adapter. Make sure that the AC outlet is easily accessible. If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page 32). Using the Battery Pack Except IRX-4860_BGN The battery pack supplied with your computer is not fully charged at the time of delivery. Except IRX-4860_END IRX-4860_BGN The battery pack supplied with your computer is installed on your computer and is not charged at the time of delivery.
Do not use your computer without the battery pack installed as it may cause the computer to malfunction. IRX-4860_END Getting Started >
Using the Battery Pack Installing/Removing the Battery Pack IRX-4860_BGN To install the battery pack 1 Turn off the computer and close the LCD screen lid. 2 Slide the battery LOCK switches (1) inward. 25n N 3 Place the battery pack into the battery compartment until the projection (2) on either side of the battery pack fits into the U-shaped cut (3) on either side of the battery compartment. Getting Started >
Using the Battery Pack 26n N 4 Push the battery pack down into the compartment until it clicks into place. 5 Slide the battery LOCK switches outward to secure the battery pack on the computer. To remove the battery pack
You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack while the computer is in Sleep mode. Getting Started >
Using the Battery Pack 27n N 1 Turn off the computer and close the LCD screen lid. 2 Slide the battery LOCK switches (1) inward. 3 Slide and hold the battery RELEASE latch (2) inward, put your fingertip underneath the tab (3) on the battery pack, and lift the battery pack in the direction of the arrow, and then slide it away from the computer. IRX-4860_END US model_BGN
This computer is designed to operate only with genuine Sony battery packs. US model_END Euro model_BGN
Certain rechargeable batteries do not meet Sony quality and safety standards. For safety reasons this computer only functions with genuine Sony battery packs designed for this model. If an unauthorized battery pack is installed, the battery will not be charged and the computer will not function. Getting Started >
Using the Battery Pack Euro model_END GVD model_BGN 28n N
For your safety, it is highly recommended that you use genuine Sony rechargeable battery packs and AC adapters that meet the quality assurance standards and supplied by Sony for your VAIO computer. Some VAIO computers may operate only with genuine Sony battery packs. GVD model_END China model_BGN
For your safety, Sony recommends only using the genuine Sony battery packs that are designed to this model. China model_END Charging the Battery Pack The battery pack supplied with your computer is not fully charged at the time of delivery. To charge the battery pack 1 2 Connect the computer to a power source with the AC adapter. Install the battery pack. The charge indicator light is on while the battery pack is charging. When the battery pack charges close to the maximum charge level you selected with the battery charge functions, the charge indicator turns off. Charge indicator status Meaning Lit in orange The battery pack is charging. Blinks along with the green power indicator Blinks along with the orange power indicator The battery pack is running out of power.
(Normal mode) The battery pack is running out of power.
(Sleep mode) Getting Started >
Using the Battery Pack 29n N Charge indicator status Meaning Blinks fast in orange A battery error has occurred due to a failed battery pack or an unlocked battery pack.
Charge the battery pack as described in this manual from your first battery charge. When the battery pack is running out of power and both the charge and power indicator lights blink, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack. Your computer is supplied with a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect the life of battery. You can extend the life of your battery pack if you enable the battery care function of the Battery Charge Functions with the VAIO Control Center. China model_BGN By default, your computer enters Sleep mode automatically after about 30 minutes of inactivity when running on AC power. Press any key to bring it back into Normal mode. When running on battery power, it switches the power saving mode automatically from Sleep mode to Hibernate mode if the computer is not used for a certain period of time. To bring it back from Hibernate mode to Normal mode, press the power button. China model_END While some software applications or peripheral devices are in use, your computer may not enter Hibernate mode even when the remaining battery life becomes short. To avoid loss of data while the computer is running on the battery, you should save your data frequently and manually activate a power management mode, such as Sleep or Hibernate. If the battery pack runs out of power while the computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is impossible. To avoid loss of data, you should save your data frequently. When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet. Getting Started >
Shutting Down Your Computer Safely 30n N Extending Your Battery Life When your computer is running on battery power, you can extend your battery life using the following methods. Decrease the LCD brightness of your computer screen. Use the power saving mode. See Using the Power Saving Modes (page 30) for more information. Change the power saving settings on the Windows Power Options. See Using the VAIO Power Management (page 84) for more information. Set the wallpaper in Long Battery Life Wallpaper Setting as your desktop background with the VAIO Control Center. Shutting Down Your Computer Safely To avoid losing unsaved data, be sure to shut down your computer properly, as described below. To shut down your computer 1 Turn off any peripherals connected to the computer. 2 Click Start and the Shut down button. 3 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off automatically. The power indicator light turns off. Using the Power Saving Modes You can take advantage of the power management settings to conserve battery life. In addition to the normal operating mode, your computer has two distinct power saving modes to suit your preference: Sleep and Hibernate. Getting Started >
Using the Power Saving Modes 31n N
If you do not intend to use your computer for a long period of time while it is disconnected from AC power, place the computer into Hibernate mode or turn it off. If the battery pack runs out of power while your computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is impossible. To avoid loss of data, you should save your data frequently. Mode Normal mode Sleep mode Hibernate mode Description This is the normal state of your computer while it is in use. The green power indicator light is lit while the computer is in this mode. Sleep mode turns off the LCD screen and places the built-in storage device(s) and the CPU into a low power consumption mode. The orange power indicator light blinks slowly while your computer is in this mode. Your computer comes out of Sleep mode quicker than out of Hibernate mode. However, Sleep mode uses more power than Hibernate mode. While your computer is in Hibernate mode, the state of the system is saved on the built-in storage device(s) and power is turned off. Even when the battery pack runs out of power, no data will be lost. The power indicator light is unlit while your computer is in this mode. Using Sleep Mode To activate Sleep mode next to the Shut down button, and Sleep. Click Start, the arrow To return to Normal mode Press any key. Press the power button on your computer.
If you press and hold the power button for more than four seconds, your computer will turn off automatically. You will lose all unsaved data. Getting Started >
Updating Your Computer 32n N Using Hibernate Mode To activate Hibernate mode Press the Fn+F12 keys. Alternatively, you can click Start, the arrow next to the Shut down button, and Hibernate.
Do not move your computer before its power indicator light turns off. To return to Normal mode Press the power button.
If you press and hold the power button for more than four seconds, your computer will turn off automatically. Updating Your Computer Be sure to install the latest updates on your computer with the following software applications so that the computer can run more efficiently. Windows Update Click Start, All Programs, and Windows Update and then follow the on-screen instructions. VAIO Update 4 Click Start, All Programs, VAIO Update 4, and Go to VAIO Web Support and then follow the on-screen instructions.
Your computer must be connected to the Internet to download the updates. Using Your VAIO Computer >
Using the Keyboard 33n N Using Your VAIO Computer This section describes how to get the most out of using your VAIO computer. Using the Keyboard (page 33) Using the Touch Pad (page 35) Using the Built-in Camera (page 37) Using "Memory Stick" (page 38) Using Other Modules / Memory Cards (page 43) Using the Internet (page 46) Using the Network (LAN) (page 48) Using the Wireless LAN (page 49) Except US model_BGN Using the Wireless WAN (page 56) Except US model_END Using the Bluetooth Function (page 60) Euro model_BGN Using the GPS Function (page 65) Euro model_END Using the Keyboard Your keyboard has additional keys that perform model-specific tasks. Using Your VAIO Computer >
Using the Keyboard 34n N Combinations and Functions with the Fn Key Some keyboard functions can be used only after the operating system is finished launching. IRX-4860_BGN Combination/Feature Fn + % (F2): muting Fn + 2 (F3/F4): volume control Fn + 8 (F5/F6): brightness control Fn +
/T (F7): display output Function Turns on and off the built-in speakers or the headphones. Changes the volume level. To increase the volume, keep pressing the Fn+F4 keys or press the Fn+F4 keys and then the M or , key. To decrease the volume, keep pressing the Fn+F3 keys or press the Fn+F3 keys and then the m or < key. Changes the LCD brightness of your computer screen. To increase lighting intensity, keep pressing the Fn+F6 keys or press the Fn+F6 keys and then the M or , key. To decrease lighting intensity, keep pressing the Fn+F5 keys or press the Fn+F5 keys and then the m or < key. Switches the display output between your computer screen, an external display, simultaneous output to both, and multiple displays with both that function as a single desktop. Press the Enter key to select the display output.
If you select an external display as the display output destination when no external display is connected to your computer, the computer screen goes blank. In such a case, press the Fn+F7 keys twice and then the Enter key. Multiple displays may not be supported depending on the operating system on your computer. Using Your VAIO Computer >
Using the Touch Pad 35n N Combination/Feature Function Fn +
(F9/F10): zooming Fn +
(F12): hibernation Changes the size of an image or a document displayed on some software. To make the view look smaller and further away (zoom out), press the Fn+F9 keys. To make the view look bigger and closer (zoom in), press the Fn+F10 keys. See the help file included with the VAIO Control Center for more information. Provides the lowest level of power consumption. When you execute this command, the states of the system and the connected peripheral devices are saved to the built-in storage device and the system power is turned off. To return the system to its original state, use the power button to turn on the power. For details on power management, see Using the Power Saving Modes (page 30). IRX-4860_END Using the Touch Pad You can point to, select, drag, and scroll objects on the screen using the touch pad. Except IRX-4860_BGN Action Point Click Double-click Right-click Description Slide your finger on the touch pad (1) to place the pointer (2) on an item or object. Press the left button (3) once. Press the left button twice in a row. Press the right button (4) once. With many applications, this action displays a context-sensitive shortcut menu (if any). Using Your VAIO Computer >
Using the Touch Pad 36n N Action Drag Scroll Except IRX-4860_END IRX-4860_BGN Action Point Click Double-click Right-click Drag Scroll Flick Pinch Description Slide your finger on the touch pad while pressing the left button. Slide your finger along the right edge of the touch pad to scroll vertically. Slide your finger along the bottom edge to scroll horizontally (the scroll function is available only with applications that support a touch pad scroll feature). Slide your finger along the right edge of the touch pad to scroll vertically. Slide your finger along the bottom edge to scroll horizontally. Once vertical or horizontal scrolling is engaged, you can move your finger in circles on the touch pad to keep scrolling without taking the finger off the touch pad (the scroll function is available only with applications that support a touch pad scroll feature). Description Slide your finger on the touch pad (1) to place the pointer (2) on an item or object. Press the left button (3) once. Press the left button twice in a row. Press the right button (4) once. With many applications, this action displays a context-sensitive shortcut menu (if any). Slide your finger on the touch pad while pressing the left button. Slide your finger along the right edge of the touch pad to scroll vertically. Slide your finger along the bottom edge to scroll horizontally. Once vertical or horizontal scrolling is engaged, you can move your finger in circles on the touch pad to keep scrolling without taking the finger off the touch pad (the scroll function is available only with applications that support a touch pad scroll feature). Slide your finger linearly in quick motion on the touch pad. On web browser software or image viewer software, you can flick left to move backward and flick right to move forward. With some software applications, you can pinch on the touch pad with two fingers for zooming. Pinch open to zoom in or pinch close to zoom out. Using Your VAIO Computer >
Using the Built-in Camera IRX-4860_END 37n N You can disable/enable the touch pad while a mouse is connected to your computer. To change the touch pad settings, use the VAIO Control Center.
Be sure to connect a mouse before disabling the touch pad. If you disable the touch pad before connecting a mouse, you will be able to use only the keyboard for pointer operations. Using the Built-in Camera Your computer is equipped with a built-in MOTION EYE camera. Except IRX-4860_BGN With the preinstalled image capture software, you can perform the following operations:
Capturing still images and movies Sensing and capturing object movements for monitoring purposes Editing captured data Except IRX-4860_END IRX-4860_BGN With the communication software, such as the Skype, you can join a video conference through the Internet. IRX-4860_END Turning on the computer activates the built-in camera. Video conferences are possible with the appropriate software. Using Your VAIO Computer >
Using "Memory Stick"
38n N
Launching or exiting your instant messaging or video editing software does not activate or deactivate the built-in camera. Do not place your computer into Sleep or Hibernate mode while you are using the built-in camera. Except IRX-4860_BGN To use the preinstalled image capture software 1 Click Start, All Programs, ArcSoft WebCam Companion 3, and WebCam Companion 3. 2 Click your desired icon in the main window. For detailed information on how to use the software, see the help file included with the software. When capturing an image or a movie in a dark place, click the Capture icon in the main window, and then click the WebCam Settings icon and select the low light or low light compensation option in the properties window. Except IRX-4860_END Using "Memory Stick"
"Memory Stick" is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones, and other devices. Because it is removable, it can be used for external data storage. Before You Use "Memory Stick"
Except IRX-4860_BGN The "Memory Stick Duo" slot on your computer can accommodate both standard- and Duo-size media and supports "Memory Stick PRO", "Memory Stick PRO Duo", and "Memory Stick PRO-HG Duo" with high-speed data transfer and large data capacity capabilities. Using Your VAIO Computer >
Using "Memory Stick"
Except IRX-4860_END IRX-4860_BGN 39n N The "Memory Stick Duo" slot on your computer can accommodate Duo-size media and supports "Memory Stick PRO Duo"
and "Memory Stick PRO-HG Duo" with high-speed data transfer and large data capacity capabilities. IRX-4860_END For the latest information about "Memory Stick", visit [memorystick.com] at http://www.memorystick.com/en/. Inserting and Removing "Memory Stick"
To insert "Memory Stick"
1 2 Hold "Memory Stick" with the arrow facing upward and pointing toward the slot. 3 Carefully slide "Memory Stick" into the slot until it clicks into place. Locate the "Memory Stick Duo" slot.
"Memory Stick" is automatically detected by your system and the contents of "Memory Stick" are displayed. If nothing appears on the desktop, click Start, Computer, and double-click the "Memory Stick" icon. IRX-4860_BGN Using Your VAIO Computer >
Using "Memory Stick"
40n N IRX-4860_END Except IRX-4860_BGN You can insert Duo-size "Memory Stick" directly into the "Memory Stick" slot without using a "Memory Stick Duo" adaptor. Except IRX-4860_END
Be sure to hold "Memory Stick" with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the media, do not force "Memory Stick" into the slot if you cannot insert it smoothly. Except IRX-4860_BGN Before using "Memory Stick Micro" ("M2"), be sure to insert it into an "M2" Standard-size adaptor or "M2" Duo adaptor. If you insert the media directly into the "Memory Stick" slot without the adaptor, you may not be able to remove it from the slot.
"Memory Stick Micro" in an "M2" Duo adaptor may not operate properly if it is additionally inserted into a "Memory Stick Duo" adaptor. Using Your VAIO Computer >
Using "Memory Stick"
Except IRX-4860_END IRX-4860_BGN 41n N Before using "Memory Stick Micro" ("M2"), be sure to insert it into an "M2" Duo adaptor. If you insert the media directly into the "Memory Stick Duo"
slot without the adaptor, you may not be able to remove it from the slot. IRX-4860_END To remove "Memory Stick"
Do not remove "Memory Stick" while the Media Access indicator light is lit. If you do, you may lose data. Large volumes of data may take time to load, so make sure the indicator light is unlit before removing "Memory Stick". 1 Check that the Media Access indicator light is unlit. 2 Push in "Memory Stick" toward the computer and release.
"Memory Stick" ejects. 3 Pull "Memory Stick" out of the slot.
Be sure to remove "Memory Stick" gently, or it may pop out unexpectedly. Formatting "Memory Stick"
To format "Memory Stick"
"Memory Stick" has been formatted by default and is ready for use. If you want to reformat the media with your computer, follow these steps. Using Your VAIO Computer >
Using "Memory Stick"
42n N
Be sure to use the device that is designed to format the media and supports "Memory Stick" when formatting the media. Formatting "Memory Stick" erases the entire data stored on the media. Before formatting the media, make sure that it does not contain your valuable data. Do not remove "Memory Stick" from the slot while formatting. This could cause a malfunction. 1 Carefully slide "Memory Stick" into the slot until it clicks into place. 2 Click Start and Computer to open the Computer window. 3 Right-click the "Memory Stick" icon and select Format. 4 Click Restore device defaults.
The size of the allocation unit and file system may change. Do not select NTFS from the File system drop-down list as it may cause a malfunction. The formatting process will be completed more quickly if you select Quick Format in Format options. 5 Click Start. 6 Follow the on-screen instructions.
It may take time to format "Memory Stick" depending on the media type. Notes on Using "Memory Stick"
Your computer has been tested and found compatible with Sony branded "Memory Stick" with capacity of up to 16 GB that are available as of May 2009. However, not all "Memory Stick" that meet the same specifications as the compatible media are guaranteed of compatibility. Using Your VAIO Computer >
Using Other Modules / Memory Cards 43n N Inserting "Memory Stick" with multiple conversion adaptors is not guaranteed of compatibility.
"MagicGate" is the general name of the copyright protection technology developed by Sony. Use "Memory Stick" with the
"MagicGate" logo to take advantage of this technology. Except for your personal use, it is against the copyright law to use any audio and/or image data you recorded without prior consent from the respective copyright holders. Accordingly, "Memory Stick" with such copyrighted data can be used only within the law. Except IRX-4860_BGN The "Memory Stick Duo" slot on your computer does not support 8-bit parallel data transfer (high-speed data transfer). Except IRX-4860_END Do not insert more than one "Memory Stick" into the slot. Improper insertion of the media may damage both your computer and the media. Using Other Modules / Memory Cards Using the SD Memory Card Your computer is equipped with an SD memory card slot. You can use this slot to transfer data among digital cameras, camcorders, music players, and other audio/video devices. Before you use the SD memory card The SD memory card slot on your computer supports the following memory cards:
SD memory card SDHC memory card For the latest information on compatible memory cards, see Finding More about Your VAIO Computer (page 6) to visit the appropriate support web site. Using Your VAIO Computer >
Using Other Modules / Memory Cards 44n N To insert an SD memory card 1 Locate the SD memory card slot. 2 Hold the SD memory card with the arrow facing upward and pointing toward the slot. 3 Carefully slide the SD memory card into the slot until it clicks into place. Do not force the card into the slot. IRX-4860_BGN IRX-4860_END If the SD memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction. To remove an SD memory card 1 Check that the Media Access indicator light is unlit. Using Your VAIO Computer >
Using Other Modules / Memory Cards 45n N 2 Push in the SD memory card toward the computer and release. The SD memory card ejects. 3 Pull the SD memory card out of the slot. Notes on Using Memory Cards General notes on using the memory card Be sure to use memory cards that are compliant with the standards supported by your computer. Be sure to hold the memory card with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the media, do not force the memory card into the slot if you cannot insert it smoothly. Use care when inserting or removing the memory card from the slot. Do not force it in or out of the slot. Do not remove the memory card while the media access indicator light is lit. If you do, you may lose data. Do not attempt to insert a memory card or memory card adaptor of a different type into the memory card slot. An incompatible memory card or memory card adaptor may cause difficulty in removing from the slot and can cause damage to your computer. Notes on using the SD memory card Your computer has been tested and found compatible only with major memory cards available as of May 2009. However, not all memory cards that meet the same specifications as the compatible media are guaranteed of compatibility. SD memory cards with capacity of up to 2 GB and SDHC memory cards with capacity of up to 32 GB have been tested and found compatible with your computer. The SD memory card slot on your computer does not support the high-speed data transfer feature of the SD memory card and the SDHC memory card. Using Your VAIO Computer >
Using the Internet 46n N Using the Internet Before using the Internet, you need to sign up with an Internet Service Provider (ISP) and set up devices required for connecting your computer to the Internet. The following types of Internet connection services may be available from your ISP:
Fiber to the Home (FTTH) Digital Subscriber Line (DSL) Cable modem Satellite Dial-up For detailed information on devices required for Internet access and how to connect your computer to the Internet, ask your ISP. To connect your computer to the Internet using the wireless LAN function, you need to set up the wireless LAN network. See Using the Wireless LAN
(page 49) for more information.
When you connect your computer to the Internet, be sure to take appropriate security measures to protect the computer against online threats. IRX-4860_BGN Depending on the service contract with your ISP, you may need to connect an external modem device, for example a USB telephone modem, a DSL modem, or a cable modem, to your computer to connect to the Internet. For the detailed instructions on connection setups and modem configuration, see the manual that came with your modem. IRX-4860_END Using Your VAIO Computer >
Using the Internet Except IRX-4860_BGN 47n N If your computer is not equipped with a built-in modem, you may need to connect an external modem device, for example a USB telephone modem, a DSL modem, or a cable modem, to your computer. For the detailed instructions on connection setups and modem configuration, see the manual that came with your modem. To connect a telephone cable
The following procedure applies to models with a built-in modem only. 1 Plug one end of the phone cable (1) into the modem port 2 Plug the other end into the wall jack (2). on the computer.
Your computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a private branch exchange (PBX). Some of these connections may result in excess electrical current and could cause a malfunction in the built-in modem. If you connect a telephone cable coming through a splitter, the modem or connected device may not work properly. To set up a dial-up connection to the Internet
The following procedure applies to models with a built-in modem only. 1 Click Start and Control Panel. 2 Click Network and Internet. Using Your VAIO Computer >
Using the Network (LAN) 3 Click Network and Sharing Center. 4 Click Set up a new connection or network. 5 Click Set up a dial-up connection and Next. 6 Follow the on-screen instructions. 48n N Except IRX-4860_END Using the Network (LAN) You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T type networks with a LAN cable. Connect one end of a LAN cable (not supplied) to the network (LAN) port on the computer and the other end to your network. For detailed settings and devices required for LAN access, ask your network administrator. IRX-4860_BGN
You need to unfold the tilt feet before using the network (LAN) port on your computer. IRX-4860_END Using Your VAIO Computer >
Using the Wireless LAN 49n N You can connect your computer to any network without changing the default settings.
Do not plug a telephone cable into the network (LAN) port on your computer. If the network (LAN) port is connected to one of the telephone lines mentioned below, high electric current to the port may cause damage, overheating, or fire.
- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)
- Public telephone subscriber line
- Private branch exchange (PBX) Using the Wireless LAN Using the Wireless LAN (WLAN), all your digital devices with the built-in WLAN function communicate freely with each other through a network. A WLAN is a network in which a user can connect to a Local Area Network (LAN) through a wireless (radio) connection. The WLAN supports all normal LAN connectivity, but with the added benefits of mobility and roaming. You can still access information, Internet/intranet and network resources, even in the middle of a meeting, or as you move from one place to another. You can communicate without an access point, which means that you can communicate with a limited number of computers
(ad-hoc). Or you can communicate through an access point, which allows you to create a full infrastructure network. US model_BGN Using Your VAIO Computer >
Using the Wireless LAN 50n N To use the wireless LAN function
Be sure to turn on the WIRELESS switch before starting the wireless LAN function. The IEEE 802.11a standard, using the 5 GHz band, and the IEEE 802.11n draft standard, using the 2.4 GHz or 5 GHz band, are not available on ad-hoc networks. To use the wireless LAN function, you first need to set up the wireless LAN function. Use the SmartWi Connection Utility to set up the wireless LAN function. See the SmartWi Connection Utility Help for more information. To access this on-screen guide:
1 Click Start, All Programs, and SmartWi Connection Utility. 2 Click SmartWi Connection Utility Help. In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the WLAN function, read the Safety Information carefully. US model_END Euro model_BGN In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the WLAN function, read the wireless LAN regulations guide carefully. Euro model_END Except Euro_BGN Except US model_BGN Using Your VAIO Computer >
Using the Wireless LAN 51n N In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the WLAN function, read the Safety Regulations carefully. Except US model_END Except Euro_END WLAN uses the IEEE 802.11a*/b/g standard or the IEEE 802.11n* draft standard, which specifies the type of technology used. The standard includes the encryption methods: Wired Equivalent Privacy (WEP), which is a security protocol, Wi-Fi Protected Access 2 (WPA2), and Wi-Fi Protected Access
(WPA). Proposed jointly by the IEEE and Wi-Fi Alliance, both WPA2 and WPA are specifications of standards based on interoperable security enhancements that increase the level of data protection and access control for existing Wi-Fi networks. WPA is designed to be forward compatible with the IEEE 802.11i specification. It utilizes the enhanced data encryption Temporal Key Integrity Protocol (TKIP) in addition to user authentication using 802.1X and Extensible Authentication Protocol (EAP). Data encryption protects the vulnerable wireless link between clients and access points. Besides that, there are other typical LAN security mechanisms to ensure privacy, such as: password protection, end-to-end encryption, virtual private networks, and authentication. WPA2, the second generation of WPA, provides stronger data protection and network access control and is also designed to secure Using Your VAIO Computer >
Using the Wireless LAN 52n N all versions of 802.11 devices, including 802.11b, 802.11a, 802.11g, and 802.11n draft standard, multi-band and multi-mode. In addition, based on the ratified IEEE 802.11i standard, WPA2 provides government grade security by implementing the National Institute of Standards and Technology
(NIST) FIPS 140-2 compliant AES encryption algorithm and 802.1X-based authentication. WPA2 is backward compatible with WPA.
* See the specifications to find out about the configuration of your computer. The IEEE 802.11b/g standard is a wireless LAN standard, using the 2.4 GHz band. The IEEE 802.11g standard provides higher-speed communications than the IEEE 802.11b standard. The IEEE 802.11a standard is a wireless LAN standard, using the 5 GHz band. The IEEE 802.11n draft standard is a wireless LAN standard, using the 2.4 GHz or 5 GHz band. Wireless LAN devices using the 2.4 GHz band cannot communicate with devices using the 5 GHz band because the frequencies are different. The 2.4 GHz band used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference from other devices that use the same band are employed on wireless LAN compatible devices, such interference may cause lower communication speed, narrower communication range, or broken wireless connections. The communication speed varies depending on the distance between communication devices, existence of obstacles between such devices, the device configuration, the radio conditions, and the software in use. In addition, communications may be cut off depending on the radio conditions. The communication range varies depending on the actual distance between communication devices, existence of obstacles between such devices, the radio conditions, the ambient environment that includes existence of walls and materials of such walls, and the software in use. Actual communication speed may not be as fast as the one displayed on your computer. Deploying IEEE 802.11b and IEEE 802.11g products on the same wireless network may reduce the communication speed due to radio interference. Taking this into consideration, the IEEE 802.11g products are designed to reduce the communication speed to ensure communications with IEEE 802.11b products. When the communication speed is not as fast as expected, changing the wireless channel on the access point may increase the communication speed. Except US model_BGN Using Your VAIO Computer >
Using the Wireless LAN 53n N Communicating without an Access Point (Ad-hoc) An ad-hoc network is a network in which a LAN is created only by wireless devices themselves, with no other central controller or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home. To communicate without an access point (ad-hoc)
The IEEE 802.11a standard, using the 5 GHz band, and the IEEE 802.11n draft standard, using the 2.4 GHz or 5 GHz band, are not available on ad-hoc networks. 1 Turn on the WIRELESS switch. 2 Click the VAIO Smart Network icon on the taskbar and select Show main window. 3 Click the switch next to your desired wireless option(s) to toggle it to On in the VAIO Smart Network window. Make sure the WIRELESS indicator light turns on. 4 Click Start and Control Panel. 5 Click View network status and tasks under Network and Internet. 6 Click Set up a new connection or network. Using Your VAIO Computer >
Using the Wireless LAN 54n N 7 Select an option to specify the ad-hoc network settings and click Next. 8 Follow the on-screen instructions. Communicating with an Access Point (Infrastructure) An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access point (not supplied). The access point bridges the wireless and wired LAN and acts as a central controller for the wireless LAN network. The access point coordinates transmission and reception from multiple wireless devices within a specific range. The access point will select which channel to use on an infrastructure network.
For details on how to select the channel that will be used by the access point, see the manual that came with your access point. To connect to a wireless network 1 Make sure an access point is set up. See the manual that came with your access point for more information. 2 Turn on the WIRELESS switch. Using Your VAIO Computer >
Using the Wireless LAN 55n N 3 Click the VAIO Smart Network icon on the taskbar and select Show main window. 4 Click the switch next to your desired wireless option(s) to toggle it to On in the VAIO Smart Network window. Make sure the WIRELESS indicator light turns on. Euro model_BGN Except IRX-4860_BGN
Wireless LAN communication (IEEE 802.11a standard) using only the 5 GHz band, available on selected models only, is disabled by default. To enable 5 GHz band communication, you need to select the option to use the 5 GHz band or both the 2.4 GHz and 5 GHz bands from the drop-down list for Wireless LAN Settings in the VAIO Smart Network settings window. Euro model_END GVD model_BGN
Wireless LAN communication (IEEE 802.11a standard) using only the 5 GHz band, available on selected models only, is disabled by default. To enable 5 GHz band communication, you need to select the option to use the 5 GHz band or both the 2.4 GHz and 5 GHz bands from the drop-down list for Wireless LAN Settings in the VAIO Smart Network settings window. GVD model_END China model_BGN
Wireless LAN communication (IEEE 802.11a standard) using only the 5 GHz band, available on selected models only, is disabled by default. To enable 5 GHz band communication, you need to select the option to use the 5 GHz band or both the 2.4 GHz and 5 GHz bands from the drop-down list for Wireless LAN Settings in the VAIO Smart Network settings window. China model_END Except IRX-4860_END 5 Right-click 6 Select the desired access point and click Connect. or on the taskbar and select Connect to a network. Using Your VAIO Computer >
Using the Wireless WAN 56n N For WPA-PSK or WPA2-PSK authentication, you must enter a passphrase. The passphrase is case sensitive and must be a text string between 8 and 63 characters in length or a hexadecimal string of 64 characters. Stopping Wireless LAN Communications To stop wireless LAN communications Click the switch next to Wireless LAN to toggle it to Off in the VAIO Smart Network window.
Turning off the wireless LAN function while accessing remote documents, files, or resources may result in data loss. Except US model_END Except US model_BGN Using the Wireless WAN Using the wireless WAN (WWAN) allows your computer to connect to the Internet through the wireless network wherever there is the mobile phone coverage. Euro model_BGN The WWAN may not be available in some countries or areas. See Wireless WAN Regulations Guide in Regulations, Guarantee, and Service Support to find out in which countries or areas the WWAN is available. Euro model_END Features and options in this section may not be available on your computer. See the specifications to find out about the configuration of your computer. Using Your VAIO Computer >
Using the Wireless WAN 57n N Inserting a SIM Card To use the wireless WAN function, you first need to insert a SIM card into the SIM card slot on your computer. Your SIM card is contained within a base plate, about the size of a credit card. Depending on your country and model, you might receive an offer from the VAIO selected telecom operator. In that case the SIM card is either in the operator SIM pack inside the carton box or already inserted in the SIM card slot. If the SIM card is not provided with your computer, you can purchase one from your preferred telecom operator. To insert a SIM card 1 Turn off your computer. 2 Remove the battery pack from the computer. 3 Remove the SIM card (1) by pushing it out from the base plate. 4 Insert the SIM card into the SIM card slot with its printed circuit side down. IRX-4860_BGN Using Your VAIO Computer >
Using the Wireless WAN 58n N IRX-4860_END
Do not touch the printed circuit on the SIM card. Be sure to hold your computer firmly before inserting or removing the card. Do not damage the SIM card in any way, either by bending or exerting pressure on the card. 5 Reinstall the battery pack.
Make sure the battery pack is installed properly. Starting the Wireless WAN Communications To start the wireless WAN communications Euro model_BGN 1 Turn on the WIRELESS switch. 2 Click the VAIO Smart Network icon on the taskbar and select Show main window. 3 Click the switch next to Wireless WAN to toggle it to On in the VAIO Smart Network window. Using Your VAIO Computer >
Using the Wireless WAN 59n N 4 Click the down arrow button next to the WWAN switch and the Connect button to launch Mobile Broadband Connection. Depending on your model, country, or area, you might need to use the GlobeTrotter Connect, the 3G Connection Manager, or the software specified by a telecom operator in order to connect to a network. 5 Enter your PIN code when prompted. 6 if requested, enter the APN information of your telecom operator. Euro model_END GVD model_BGN 1 Turn on the WIRELESS switch. 2 Click the VAIO Smart Network icon on the taskbar and select Show main window. 3 Click the switch next to Wireless WAN to toggle it to On in the VAIO Smart Network window. 4 5 Enter your PIN code when prompted. 6 7 Click Connect. If requested, enter the APN information of your telecom operator. Launch the Windows Network Connection. GVD model_END China model_BGN Pending China model_END For more information on how to use the wireless WAN function, see the help file included with the VAIO Smart Network software or your telecom operator's documentation. Using Your VAIO Computer >
Using the Bluetooth Function Except US model_END Using the Bluetooth Function US model_BGN 60n N You can establish wireless communications between your computer and other Bluetooth devices such as another computer or a mobile phone. You can transfer data between these devices without cables at a range of up to 33 feet (10 meters) in an open area. To use the Bluetooth function
Be sure to turn on the WIRELESS switch before starting the Bluetooth function. To use the Bluetooth function, you first need to set up the Bluetooth function. Use the SmartWi Connection Utility to set up the Bluetooth function. See the SmartWi Connection Utility Help for more information. To access this on-screen guide:
1 Click Start, All Programs, and SmartWi Connection Utility. 2 Click SmartWi Connection Utility Help. US model_END Euro model_BGN You can establish wireless communications between your computer and other Bluetooth devices such as another computer or a mobile phone. You can transfer data between these devices without cables at a range of up to 10 meters in an open area. Euro model_END GVD model_BGN Using Your VAIO Computer >
Using the Bluetooth Function 61n N You can establish wireless communications between your computer and other Bluetooth devices such as another computer or a mobile phone. You can transfer data between these devices without cables at a range of up to 10 meters in an open area. GVD model_END China model_BGN You can establish wireless communications between your computer and other Bluetooth devices such as another computer or a mobile phone. You can transfer data between these devices without cables at a range of up to 10 meters in an open area. China model_END Bluetooth Security The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to communicate. With the authentication function, you can prevent any anonymous Bluetooth devices from accessing your computer. The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be determined for both devices to be registered. Once a device is registered, there is no need to re-enter the passkey. The passkey can be different each time, but must be the same at both ends. For certain devices, such as a mouse, no passkey can be entered. Communicating with Another Bluetooth Device You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a mouse, or a digital camera without the use of any cables. Using Your VAIO Computer >
Using the Bluetooth Function 62n N To communicate with another Bluetooth device To communicate with another Bluetooth device, you first need to set up the Bluetooth function. For setting up and using the Bluetooth function, search Windows Help and Support for Bluetooth information. US model_BGN
Be sure to turn on the WIRELESS switch before starting the Bluetooth function. US model_END Except US model_BGN 1 Turn on the WIRELESS switch. Using Your VAIO Computer >
Using the Bluetooth Function 63n N 2 Click the VAIO Smart Network icon on the taskbar and select Show main window. 3 Click the switch next to Bluetooth to toggle it to On in the VAIO Smart Network window. Make sure the WIRELESS indicator light turns on. Except US model_END Except US model_BGN Stopping Bluetooth Communications To stop Bluetooth communications 1 Turn off the Bluetooth device that is communicating with your computer. 2 Click the switch next to Bluetooth to toggle it to Off in the VAIO Smart Network window. Except US model_END Notes on Using the Bluetooth Function The data transfer rate varies, depending on the following conditions:
Obstacles, such as walls, located between devices Distance between devices Material used in walls Proximity to microwaves and cordless telephones Radio frequency interference and other environmental conditions Device configuration Type of software application Type of operating system Using Your VAIO Computer >
Using the Bluetooth Function 64n N Use of both wireless LAN and Bluetooth functions at the same time on your computer Size of file being exchanged Large files may occasionally be corrupted during continuous transfer due to limitations of the Bluetooth standard and electromagnetic interference in the environment. All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained. Even if standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange may not be possible in all situations. Video and audio may not be synchronized if you play videos on your computer with audio output from a connected Bluetooth device. This is a frequent occurrence with Bluetooth technology and is not a malfunction. The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous use of the Bluetooth function and wireless communication devices, however, may cause radio interference and result in reduced communication speeds and distances than the standard values. Euro model_BGN Read the Bluetooth regulations guide before using the Bluetooth function. Euro model_END The Bluetooth function may not work with other devices, depending on the manufacturer or the software version employed by the manufacturer. Connecting multiple Bluetooth devices to your computer may cause channel congestion, resulting in poor performance of the devices. This is normal with Bluetooth technology and is not a malfunction. Euro model_BGN Using Your VAIO Computer >
Using the GPS Function 65n N Using the GPS Function You can view location information in the Internet Explorer window with the VAIO Location Search feature that uses the Global Positioning System (GPS). Features and options in this section may not be available on your computer. See the specifications to find out about the configuration of your computer. To use the GPS function 1 Turn on the WIRELESS switch. 2 Click the VAIO Smart Network icon on the taskbar and select Show main window. 3 Click the switch next to GPS to toggle it to On in the VAIO Smart Network window. Make sure the WIRELESS indicator light turns on. Driver software will be installed when you first activate the GPS function on the VAIO Smart Network. Using the VAIO Location Search The VAIO Location Search feature takes advantage of GPS functions on a Wide Area Network (WAN) module to obtain and provide location information, such as your current location or nearby area information. This feature is integrated into the Internet Explorer and appears as one of its toolbars, as shown below, when you launch the Internet Explorer. To view your current location, click the search button (Google Maps in the following example). For detailed information on the VAIO Location Search, click
(Settings/Help) on the toolbar to see the help file. Using Your VAIO Computer >
Using the GPS Function
Shown above is the English toolbar as an example. 66n N Customizing the VAIO Location Search You can change settings, such as location log file settings and security settings, to customize the VAIO Location Search. To customize the VAIO Location Search 1 Click Start, All Programs, and VAIO Control Center. 2 Click Location Info/GPS and then VAIO Location Search Settings. 3 Select the desired tab in the right pane and change the settings. 4 Once finished, click OK. Alternatively, you can click the Settings/Help icon on the VAIO Location Search toolbar to access the setup window. Euro model_END Using Peripheral Devices >
Connecting an Optical Disc Drive 67n N Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer. Connecting an Optical Disc Drive (page 67) Connecting External Speakers or Headphones (page 69) Connecting an External Display (page 70) Selecting Display Modes (page 72) Using the Multiple Monitors Function (page 73) Connecting a USB Device (page 74) Connecting an Optical Disc Drive IRX-4860_BGN To use optical disc media with your computer, connect an external optical disc drive (not supplied) to your computer. IRX-4860_END Features and options in this section may not be available on your computer. See the specifications to find out about the configuration of your computer. Connecting an Optical Disc Drive
Be sure to connect an external optical disc drive before you launch any preinstalled disc operation program. Using Peripheral Devices >
Connecting an Optical Disc Drive 68n N To connect an optical disc drive 1 Plug the power cord (if any) of your external optical disc drive (1) into an AC outlet. 2 Choose the USB port (2) 3 Plug one end of a USB cable (3) into the USB port, and the other end to the optical disc drive. you prefer to use. See the manual that came with your external optical disc drive for the detailed instructions on connecting the USB cable to the drive. Disconnecting an Optical Disc Drive You can disconnect an optical disc drive while your computer is either on or off. Disconnecting the drive while the computer is in a power saving mode (Sleep or Hibernate), however, may cause the computer to malfunction. To disconnect an optical disc drive To disconnect an optical disc drive while your computer is off, skip steps 1 to 5. 1 Close all software applications accessing the optical disc drive. 2 Double-click the Safely Remove Hardware icon on the taskbar. Using Peripheral Devices >
Connecting External Speakers or Headphones 69n N 3 Select the optical disc drive you want to disconnect. 4 Click Stop. 5 Follow the on-screen instructions for disconnecting the optical disc drive. 6 Unplug the USB cable from the computer. Connecting External Speakers or Headphones You can connect external sound output devices (not supplied), such as speakers or headphones, to your computer. To connect external speakers Make sure your speakers are designed for computer use.
Turn down the volume of the speakers before you turn them on. Connect external speakers (1) to the headphones jack (2) i with a speaker cable (3) (not supplied). Using Peripheral Devices >
Connecting an External Display 70n N Connecting an External Display You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer display or a projector. Features and options in this section may not be available on your computer. Connect the power cord of your external display after connecting all other cables. Connecting a Computer Display or a Projector You can connect a computer display (analog monitor) or a projector to your computer. To connect a computer display or a projector Except IRX-4860_BGN 1 If you want to connect a computer display (an analog monitor), plug one end of the display's power cord (1) into your display if necessary, and the other end into an AC outlet. 2 Plug the display cable (2) into the monitor port (3) a on the computer. 3 4 Plug one end of the display cable (5) into the monitor port on the projector, and the other end into the monitor port (3) on If you want to connect a projector, plug the projector's power cord (4) into an AC outlet. the computer. 5 Plug one end of the speaker cable (6) into the headphones jack on the projector, and the other end into the headphones jack (7) i on the computer. Except IRX-4860_END IRX-4860_BGN 1 Unfold the tilt feet (page 21). Using Peripheral Devices >
Connecting an External Display 71n N 2 If you want to connect a computer display (an analog monitor), plug one end of the display's power cord (1) into your display if necessary, and the other end into an AC outlet. 3 Plug the display cable (2) into the monitor port (3) a on the computer. 4 5 Plug one end of the display cable (5) into the monitor port on the projector, and the other end into the monitor port (3) on If you want to connect a projector, plug the projector's power cord (4) into an AC outlet. the computer. 6 Plug one end of the speaker cable (6) into the headphones jack on the projector, and the other end into the headphones jack (7) i on the computer. IRX-4860_END Using Peripheral Devices >
Selecting Display Modes 72n N Selecting Display Modes When an external display is connected, you can select either your computer screen or the connected display to use as the primary monitor. If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors Function (page 73) for more information. IRX-4860_BGN
You need to unfold the tilt feet before using the monitor port on your computer. IRX-4860_END You may not be able to display the same contents on your computer screen and the external display or projector at the same time, depending on the type of your external display or projector. Turn on the external display before turning on your computer. To select a display mode with the Fn+F7 keys You can select a display mode with the Fn+F7 keys. See Combinations and Functions with the Fn Key (page 34) for the detailed procedure. To select a display mode from the display settings 1 Right-click on the desktop and select Screen resolution. 2 Click the drop-down list next to Multiple Displays, select your desired setting, and then click OK. Using Peripheral Devices >
Using the Multiple Monitors Function 73n N Using the Multiple Monitors Function The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you have an external display connected to the monitor port, your computer screen and the external display can function as a single desktop. You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window or a toolbar, from one display to the other. To use the Multiple Monitors function IRX-4860_BGN
You need to unfold the tilt feet before using the monitor port on your computer. IRX-4860_END Using Peripheral Devices >
Connecting a USB Device 74n N Your external display may not support the Multiple Monitors function. Certain software applications may not be compatible with Multiple Monitors settings. Make sure that your computer does not enter Sleep or Hibernate mode while you are using the Multiple Monitors function. Otherwise, the computer may not return to Normal mode. If you set different colors on each display, do not expand a single window across two displays. Otherwise, your software may not work properly. Set fewer colors or a lower resolution for each display. 1 Right-click on the desktop and select Screen resolution. 2 Click the drop-down list next to Multiple Displays, select Extend these displays, and then click OK. Additionally, you can set the display colors and resolution for each display and customize the Multiple Monitors function. Connecting a USB Device You can connect a Universal Serial Bus (USB) device to your computer, such as a mouse, floppy disk drive, speaker, and printer. To connect a USB device 1 Choose the USB port (1) you prefer to use. 2 Plug the USB device cable (2) into the USB port. Using Peripheral Devices >
Connecting a USB Device 75n N Notes on connecting a USB device You may need to install the driver software supplied with your USB device before use. See the manual that came with the USB device for more information. Be sure to use a USB printer compatible with your version of Windows to print documents. For information on how to remove a USB device, see the manual that came with the device. To protect your computer and/or USB devices from damage, observe the following:
When moving the computer with USB devices connected, avoid exposing the USB ports to shock or impact. Do not put the computer into a bag or carrying case when it has USB devices connected. GVD model_BGN The optional USB floppy disk drive may not be available in some countries or regions. GVD model_END Customizing Your VAIO Computer >
Setting the Password 76n N Customizing Your VAIO Computer This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn how to use and customize the look of your Sony software and utilities. Setting the Password (page 76) Using Intel VT (page 82) Using the VAIO Control Center (page 83) Using the VAIO Power Management (page 84) Setting the Password In addition to the Windows password, you can use BIOS functions to set two types of passwords to protect your computer:
the power-on password and the hard disk password. Once you have set the power-on password, you will be prompted to enter the password after the VAIO logo appears to start your computer. The power-on password allows you to protect your computer from unauthorized access. The hard disk password provides additional security for the data stored on your built-in storage device. If you set the hard disk password, other users will not be able to access the data without knowing the password, even if the password-protected built-in storage device is removed from your computer and is installed in another computer. Adding the Power-on Password The power-on password is provided to protect your computer from unauthorized access. There are two types of the power-on passwords: the machine password and the user password. The machine password is provided for users with administrative rights on the computer to change all the setup options in the BIOS setup screen, as well as to start the computer. The user password is provided for the standard users to allow for changing some of the BIOS setup options, as well as starting the computer. To set the user password, you must first set the machine password. Customizing Your VAIO Computer >
Setting the Password 77n N
Once you have set the power-on password, you cannot start your computer without entering the password. Be sure not to forget the password. Write down your password and keep it safe and private from other people. If you forget the power-on password and need assistance to reset it, a password reset fee will be charged, and your computer may need to be sent in for service to reset the password. To add the power-on password (machine password) 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the Enter key. 4 On the password entry screen, enter the password twice and press the Enter key. The password can be up to 32 alphanumeric characters (including spaces) long. 5 Select Password when Power On under Security and press the Enter key. 6 Change the setting from Disabled to Enabled. 7 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key. To add the power-on password (user password)
Make sure you set the machine password before setting the user password. 1 Turn on the computer. Customizing Your VAIO Computer >
Setting the Password 78n N 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Enter the machine password and press the Enter key. 4 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the Enter key. 5 On the password entry screen, enter the password twice and press the Enter key. The password can be up to 32 alphanumeric characters (including spaces) long. 6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key. Changing/Removing the Power-on Password To change or remove the power-on password (machine password) 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Enter the machine password and press the Enter key. 4 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the Enter key. 5 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key. To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter key. Customizing Your VAIO Computer >
Setting the Password 79n N 6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key. To change or remove the power-on password (user password) 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Enter the user password and press the Enter key. 4 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the Enter key. 5 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key. To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter key. 6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key. Adding the Hard Disk Password The hard disk password provides additional security for the data stored on your built-in storage device. If you enable the hard disk password, this adds an extra level of security. When adding the hard disk password, you must set both the master and user passwords. The master password is provided for users with administrative rights on the computer to reset the user password in the BIOS setup screen. The user password is provided to lock your built-in storage device. Once you set the user password, you will have to enter the password along with the power-on password (if set), after the VAIO logo appears. Customizing Your VAIO Computer >
Setting the Password
You cannot start your computer with the master password. 80n N If you forget the master password or the keyboard fails, which is critical to password entry, no bypass is possible and the data stored on the built-in storage device will not be accessible. There is NO RESET of this password. You will have to replace the built-in storage device at your own expense and lose all the data originally stored on the device. Be sure to write down the master password and keep it safe and private from other people. Except IRX-4860_BGN If you have set the hard disk password in conjunction with the fingerprint authentication function, you can substitute fingerprint authentication for password entry when turning on your computer. For more information, see Using Fingerprint Authentication . Except IRX-4860_END To add the hard disk password 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. If you have set the power-on password, enter your power-on password. 3 Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the Enter key. The Hard Disk Password entry screen appears. 4 Select Enter Master and User Passwords and press the Enter key. 5 Select Continue on the warning screen and press the Enter key. 6 Enter the master password twice and press the Enter key. The password should be up to 32 alphanumeric characters (including spaces) long. Customizing Your VAIO Computer >
Setting the Password 81n N 7 Enter the user password twice and press the Enter key. The password should be up to 32 alphanumeric characters (including spaces) long. 8 At the confirmation prompt, press the Enter key. 9 Press the Esc key and then the < or , key to select the Exit tab. 10 Press the M or m key to select Exit Setup and press the Enter key. At the confirmation prompt, press the Enter key. Changing/Removing the Hard Disk Password To change the hard disk password 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. If you have set the power-on password, enter your power-on password. 3 Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the Enter key. The Hard Disk Password entry screen appears. 4 Select Change Master Password or Change User Password and press the Enter key. 5 Enter the current password once and then a new password twice. 6 Press the Enter key. 7 Press the Enter key when the success message appears. 8 Press the Esc key and then the < or , key to select the Exit tab. Customizing Your VAIO Computer >
Using Intel VT 82n N 9 Press the M or m key to select Exit Setup and press the Enter key. At the confirmation prompt, press the Enter key. To remove the hard disk password 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. If you have set the power-on password, enter your power-on password. 3 Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the Enter key. The Hard Disk Password entry screen appears. 4 Select Enter Master and User Passwords and press the Enter key. 5 Enter the current password for Enter Current Hard Disk Master Password and press the Enter key. 6 Press the Enter key without entering any letter for the remaining fields. 7 Press the Enter key when the success message appears. 8 Press the Esc key and then the < or , key to select the Exit tab. 9 Press the M or m key to select Exit Setup and press the Enter key. At the confirmation prompt, press the Enter key. Using Intel VT Intel Virtualization Technology (VT) allows you to use hardware virtualization software for enhancing your computer's performance. Customizing Your VAIO Computer >
Using the VAIO Control Center 83n N
For information on virtualization and how to use hardware virtualization software, contact the software publisher. Intel VT may not be available depending on the CPU installed on your computer. To enable Intel VT 1 Turn on your computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Press the < or , key to select Advanced. 4 Press the M or m key to select Intel(R) Virtualization Technology or Intel(R) VT, press the Enter key, select Enabled, and press the Enter key.
If the Advanced tab is not displayed in the BIOS setup window or you cannot select Intel(R) Virtualization Technology, Intel VT is not available on the computer. 5 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key. Using the VAIO Control Center The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior. To use the VAIO Control Center 1 Click Start, All Programs, and VAIO Control Center. 2 Select your desired control item and change the settings. Customizing Your VAIO Computer >
Using the VAIO Power Management 84n N 3 Once finished, click OK. The setting of the desired item has been changed. For more information about each option, see the help file included with the VAIO Control Center. Some of the control items will not be visible if you open the VAIO Control Center as a standard user. Using the VAIO Power Management Power management helps you set up power plans for running on AC or battery power to suit your requirements for power consumption. The VAIO Power Management function is added to the Windows Power Options. With this software application, you can enhance the Windows power management functions to ensure better operation of your computer and longer battery life. Selecting a Power Plan When you start the computer, a power status icon appears on the taskbar. This icon indicates what kind of power source you are using at that time, for example, AC power. Click this icon to display the window that shows your power status. To select a power plan 1 Right-click the power status icon on the taskbar and select Power Options. 2 Select your desired power plan. To change the power plan settings 1 Click Change plan settings on the right of your desired power plan in the Power Options window. 2 Change the Sleep mode and display settings as needed. If you need to change the advanced settings, click Change advanced power settings and go to step 3. Otherwise, click Save changes. Customizing Your VAIO Computer >
Using the VAIO Power Management 3 Click the VAIO Power Management tab. Change the settings for each item. 4 Click OK. You can check the current power plan settings with Power Management Viewer in the VAIO Control Center. 85n N Precautions >
Safety Information 86n N Precautions This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage. Safety Information (page 86) Care and Maintenance Information (page 90) Handling Your Computer (page 91) Handling the LCD Screen (page 93) Using the Power Source (page 94) Handling the Built-in Camera (page 95) Handling Discs (page 95) Using the Battery Pack (page 96) Handling "Memory Stick" (page 97) Handling the Built-in Storage Device (page 97) Safety Information Computer Use your computer on a solid, stable surface. Except China_BGN Except Euro_BGN Provide adequate air circulation to prevent internal overheating. Do not place your computer on porous surfaces such as rugs, blankets, couches, or beds, or near draperies that may block its air vents. Precautions >
Safety Information 87n N Do not use your computer directly on your lap. The temperature of the base of the unit will rise during normal operation and over time could result in discomfort or burns. Except Euro_END Except China_END China model_BGN Provide adequate air circulation to prevent internal overheating. Do not place your computer on porous surfaces such as rugs, blankets, couches, or beds, or near draperies that may block its air vents. Do not use your computer on your lap for an extended period of time. Use of your computer for an extended period of time will heat up the bottom of the computer and may cause low-temperature burns. China model_END Euro model_BGN We advise not to use your computer directly on your lap. The temperature of the bottom of the unit may rise during normal operation, and after an extended period of time, could cause discomfort or burns. Provide adequate air circulation to prevent internal overheating. Do not place your computer on porous surfaces such as rugs, blankets, couches, or beds, or near draperies that may block its air vents. Euro model_END Use only specified peripheral equipment and interface cables. Otherwise, problems may occur. Power Source Do not place heavy objects on the power cord. Doing so may cause fire. To disconnect the cord, pull it out by holding the plug. Never pull the cord itself. Unplug your computer from the AC outlet if you are not planning to use the computer for a long period of time. When the AC adapter is not used, unplug it from the AC outlet. Precautions >
Safety Information Make sure that the AC outlet is easily accessible. Battery Pack US model_BGN 88n N Do not leave battery packs in temperatures above 140F (60C), such as in a car parked in the sun or under direct sunlight. US model_END Except US model_BGN Do not leave battery packs in temperatures above 60C, such as in a car parked in the sun or under direct sunlight. Except US model_END US model_BGN For your safety, Sony recommends using the genuine Sony battery pack and AC adapter that are provided with this product. If either of these items needs to be replaced during the life of the product, be sure to use a compatible genuine Sony battery pack or AC adapter. Information about compatible models can be found at the following URLs:
For customers in USA and Canada http://www.sony.com/vaio For customers in Latin American countries or areas http://www.sony.net/
Sony disclaims and shall assume no responsibility in case of any losses or damages arising from:
The use of non-genuine Sony battery packs or AC adapters with your VAIO computer. The disassembly, alteration of, or tampering with any Sony battery pack. US model_END China model_BGN Precautions >
Safety Information 89n N For your safety, Sony recommends using the genuine Sony battery pack and AC adapter that are provided with this product. Sony disclaims and shall assume no responsibility in case of any losses or damages arising from:
The use of non-genuine Sony battery packs or AC adapters with your VAIO computer. The disassembly, alteration of, or tampering with any Sony battery pack. China model_END Euro model_BGN Certain rechargeable battery packs do not meet Sony quality and safety standards. For safety reasons this computer only functions with genuine Sony battery packs designed for this model. If an unauthorized battery pack is installed, the battery pack will not be charged and the computer will not function. Euro model_END GVD model_BGN For your safety, it is highly recommended that you use genuine Sony rechargeable battery packs and AC adapters that meet the quality assurance standard, supplied by Sony for your VAIO computer. Some VAIO computers may only function with a genuine Sony battery pack. GVD model_END Keep the battery pack away from all sources of heat. Keep the battery pack dry. Do not open or try to disassemble the battery pack. Do not expose the battery pack to any mechanical shock, such as dropping it on a hard surface. If you are not using your computer for a long period of time, remove the battery pack from the computer to prevent damage to the battery pack. Precautions >
Care and Maintenance Information 90n N If you have not used the battery pack for a considerable amount of time, the remaining battery life may become short. However, this is normal and does not indicate a malfunction, because the battery pack will gradually discharge over time even while not in use. Connect the AC adapter to your computer and recharge the battery pack before using the computer again. Headphones Road safety Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings. Preventing hearing damage Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.
"Memory Stick"
Keep "Memory Stick" and "Memory Stick" adaptors out of reach of children. There is a risk of swallowing them. Care and Maintenance Information Computer Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer. Make sure you unplug the AC adapter and remove the battery pack before cleaning your computer. LCD Screen Use a soft, dry cloth to wipe the surface of the LCD screen. Rubbing the surface could damage the screen. Precautions >
Handling Your Computer 91n N Built-in Camera Clean the lens protection cover of the built-in camera with a blower brush or a soft brush. If the cover is extremely dirty, wipe it off with a soft dry cloth. Do not rub the cover, as it is sensitive to pressure. Discs Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol, commercially available cleaners, or anti-static spray) which may cause damage to the disc. For normal cleaning, hold the disc by its edges and use a soft cloth to wipe the surface from the center out. If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from the center out. Wipe off any remaining moisture with a dry soft cloth. Handling Your Computer If you drop a solid object or any liquid onto your computer, shut down the computer, unplug it, and remove the battery pack. You may want to have the computer checked by qualified personnel before operating it again. Do not drop your computer or place any objects on top of the computer. Do not place your computer in a location subject to:
Heat sources, such as radiators or air ducts Direct sunlight Excessive dust Moisture or rain Mechanical vibration or shock Strong magnets or speakers that are not magnetically shielded Precautions >
Handling Your Computer US model_BGN Ambient temperature of more than 95F (35C) or less than 41F (5C) US model_END Except US model_BGN Ambient temperature of more than 35C or less than 5C Except US model_END High humidity 92n N Do not place electronic equipment near your computer. The electromagnetic field of the equipment may cause the computer to malfunction. IRX-4860_BGN Do not use your computer without the battery pack installed as it may cause the computer to malfunction. IRX-4860_END Your computer uses high-frequency radio signals and may cause interference to radio or TV reception. If this occurs, relocate the computer a suitable distance away from the set. Do not use cut or damaged connection cables. US model_BGN If your computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In such a case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact an authorized Sony Service Center. To find the nearest center or agent, see Finding More about Your VAIO Computer (page 6). US model_END Except US model_BGN Precautions >
Handling the LCD Screen 93n N If your computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In such a case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact VAIO HelpdeskVAIO-LinkVAIO HelpdeskSony Computing SupportVAIO-LinkVAIO HelpdeskSony Computing Support. Except US model_END To avoid losing data when your computer is damaged, back up your data regularly. Do not exert pressure on the LCD screen or its edges when opening the LCD screen lid or lifting your computer. The LCD screen may be sensitive to pressure or added stress, and exerting pressure may damage the screen or cause it to malfunction. To open the computer, hold the base with one hand and gently lift the LCD screen lid with the other. To carry the computer with the lid open, be sure to hold the computer with both hands. Use a carrying case specially designed to carry your computer. Handling the LCD Screen Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be sure to block direct sunlight when using your computer near a window. Precautions >
Using the Power Source 94n N Do not scratch the surface of the LCD screen or exert pressure on it. This could cause a damage. Using your computer in low temperature conditions may produce a residual image on the LCD screen. This is not a malfunction. When the computer returns to normal temperature, the screen returns to normal. A residual image may appear on the LCD screen if the same image is displayed for a long period of time. The residual image disappears after a while. You can use a screen saver to prevent residual images. The LCD screen becomes warm during operation. This is normal and does not indicate a malfunction. The LCD screen is manufactured using high-precision technology. You may, however, see tiny black points and/or bright points (red, blue, or green) that continuously appear on the LCD screen. This is a normal result of the manufacturing process and does not indicate a malfunction. Do not change the LCD screen orientation setting in the Tablet PC Settings window even when there are change options available for selection, as this may make your computer unstable. Sony assumes no liability for any malfunctions arising from changes to the settings. Do not exert pressure on the LCD screen lid with the lid closed as it may scratch the LCD screen or soil it. Using the Power Source See the specifications to find out about the configuration of your computer. Do not share the AC outlet with other power-consuming equipment, such as a photocopier or a shredder. You can purchase a power strip with a surge protector. This device helps prevent damage to your computer caused by sudden power surges, in an electrical storm, for example. Use the AC adapter supplied with your computer or genuine Sony products. Do not use any other AC adapter as it may cause a malfunction. Precautions >
Handling the Built-in Camera Handling the Built-in Camera Except IRX-4860_BGN 95n N Features and options in this section may not be available on your computer. See the specifications to find out about the configuration of your computer. Except IRX-4860_END Do not touch the lens protection cover of the built-in camera, as it may cause scratches on the cover and such scratches will appear on the captured images. Do not let the direct sunlight get into the lens of the built-in camera regardless of your computer's power state, as it may cause the camera to malfunction. Except IRX-4860_BGN The built-in camera is disabled while videos or still images are imported from an i.LINK-compatible device connected to the i.LINK port. Except IRX-4860_END Handling Discs Fingerprints and dust on the surface of a disc may cause read errors. Be sure to hold the disc by its edges and central hole, as shown below:
Never affix an adhesive label to a disc. This will affect the use of the disc and may result in irreparable damage. Precautions >
Using the Battery Pack 96n N Using the Battery Pack Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures. US model_BGN Charge battery packs at temperatures between 50F to 86F (10C to 30C). Lower temperatures require longer charging time. US model_END Except US model_BGN Charge battery packs at temperatures between 10C to 30C. Lower temperatures require longer charging time. Except US model_END US model_BGN Do not charge the battery pack in any way other than as described in this user guide or as designated by Sony in writing. US model_END China model_BGN Do not charge the battery pack in any way other than as described in this user guide or as designated by Sony in writing. China model_END While the battery pack is in use or being charged, heat builds up in the battery pack. This is normal and is not cause for concern. You do not need to discharge the battery pack before recharging. If the battery pack quickly runs out of power after being fully charged, it may be reaching the end of its life and should be replaced. Precautions >
Handling "Memory Stick"
97n N Handling "Memory Stick"
Do not touch the "Memory Stick" connector with your finger or metallic objects. Use only the adhesive label supplied with "Memory Stick" as a label. Do not bend, drop, or expose "Memory Stick". Do not disassemble or modify "Memory Stick". Do not let "Memory Stick" get wet. Do not use or store "Memory Stick" in a location subject to:
Static electricity Electrical noise Extremely high temperatures, such as in a car parked in the sun Direct sunlight High humidity Corrosive substances Use the storage case supplied with "Memory Stick". Be sure to make a backup copy of your valuable data. When using "Memory Stick Duo", do not use a fine-tipped pen to write on the label adhered to "Memory Stick Duo". Exerting pressure on the media may damage internal components. Handling the Built-in Storage Device The built-in storage device (hard disk drive or solid state drive) has a high storage density and reads or writes data in a short time. However, it can be easily damaged if improperly used. If the built-in storage device is damaged, the data cannot be restored. To prevent losing data, you should be careful when handling your computer. Precautions >
Handling the Built-in Storage Device 98n N Features and options in this section may not be available on your computer. See the specifications to find out about the configuration of your computer. To avoid damaging your hard disk drive Do not subject your computer to sudden movements. Keep your computer away from magnets. Do not place your computer in a location subject to mechanical vibration or in an unstable position. Do not move your computer while the power is on. Do not turn off the power or restart your computer while reading or writing data to the hard disk drive. Do not use your computer in a place subject to extreme changes in temperature. China model_BGN Do not use your computer in a place at 3,000 meters or higher above sea level. The hard disk drive may not work properly under such an environment due to low air pressure. China model_END Do not remove the hard disk drive from your computer. To avoid damaging your solid state drive Do not turn off the power or restart your computer while reading or writing data to the solid state drive. Do not remove the solid state drive from your computer. Troubleshooting >
Troubleshooting US model_BGN 99n N This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems have simple solutions. Try these suggestions before visiting the Sony online support web site at the following URLs:
For customers in USA http://esupport.sony.com/EN/VAIO/
For customers in Canada http://www.sony.ca/support/
For customers in Spanish-speaking Latin American countries or areas http://esupport.sony.com/LA/
For customers in Brazil http://esupport.sony.com/BR/
US model_END Except US model_BGN This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems have simple solutions. Try these suggestions before contacting VAIO HelpdeskVAIO-LinkVAIO HelpdeskSony Computing SupportVAIO-LinkVAIO HelpdeskSony Computing Support. Except US model_END Features and options in this section may not be available on your computer. Computer (page 100) System Security (page 109) Troubleshooting >
Computer Battery (page 110) Built-in Camera (page 111) Networking (page 113) Bluetooth Technology (page 117) Euro model_BGN GPS (page 121) 100n N Euro model_END Display (page 122) Printing (page 125) Speakers (page 125) Touch Pad (page 127) Keyboard (page 128) Floppy Disks (page 128) Audio/Video (page 129) Memory Cards (page 131) Peripherals (page 132) Computer What should I do if my computer does not start?
Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit. Make sure the battery pack is installed properly and charged. Troubleshooting >
Computer 101n N Disconnect all connected USB devices (if any), and then restart your computer. Except IRX-4860_BGN Remove any extra memory modules you may have installed since purchase, and then restart your computer. Except IRX-4860_END If your computer is plugged into a power strip or an uninterruptible power supply (UPS), make sure the power strip or UPS is plugged into a power source and turned on. If you are using an external display, make sure it is plugged into a power source and turned on. Make sure the brightness and contrast controls are adjusted correctly. See the manual that came with your display for more information. Unplug the AC adapter and remove the battery pack. Wait three to five minutes. Reinstall the battery pack, plug the AC adapter, and then press the power button to turn on your computer. Condensation may cause your computer to malfunction. If this occurs, do not use the computer for at least one hour. Check that you are using the supplied Sony AC adapter. For your safety, use only the genuine Sony rechargeable battery pack and AC adapter, which are supplied by Sony for your VAIO computer. What should I do if the green power indicator light turns on but my screen remains blank?
Press the Alt+F4 keys several times to close the application window. An application error may have occurred. If the Alt+F4 keys do not work, click Start, the arrow next to the Shut down button, and Restart to restart your computer. If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart. If the Windows Security window appears, click Restart. If this procedure does not work, press and hold the power button for more than four seconds to shut down your computer. Unplug the AC adapter and leave the computer for about five minutes. Then plug the AC adapter and turn on the computer again. Troubleshooting >
Computer 102n N
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data. What should I do if my computer or software stops responding?
If your computer stops responding while a software application is running, press the Alt+F4 keys to close the application window. If the Alt+F4 keys do not work, click Start and the Shut down button to turn off your computer. If your computer does not turn off, press the Ctrl+Alt+Delete keys and click the Shut down button. If the Windows Security window appears, click Shut Down. If this procedure does not work, press and hold the power button until the computer turns off.
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data. Unplug the AC adapter and remove the battery pack. Wait three to five minutes. Reinstall the battery pack, plug the AC adapter, and then press the power button to turn on your computer. Try reinstalling the software. Contact the software publisher or designated provider for technical support. Why doesn't my computer enter Sleep or Hibernate mode?
Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep or Hibernate mode. To restore your computer to Normal mode 1 Close all open programs. 2 Click Start, the arrow next to the Shut down button, and Restart. Troubleshooting >
Computer 103n N 3 4 If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart. If the Windows Security window appears, click Restart. If this procedure does not work, press and hold the power button until the computer turns off.
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data. What should I do if the charge indicator light is blinking fast and my computer does not start?
This problem could be due to the battery pack not being installed properly. To resolve this problem, turn off your computer and remove the battery pack. Then reinstall the battery pack to the computer. For details, see Installing/Removing the Battery Pack (page 25). US model_BGN If the problem persists after performing the above, it means the installed battery pack is not compatible. Remove the battery pack and contact an authorized Sony Service Center. To find the nearest center or agent, see Finding More about Your VAIO Computer (page 6). US model_END Except US model_BGN If the problem persists after performing the above, it means the installed battery pack is not compatible. Remove the battery pack and contact VAIO HelpdeskVAIO-LinkVAIO HelpdeskSony Computing SupportVAIO-LinkVAIO HelpdeskSony Computing Support. Except US model_END Troubleshooting >
Computer 104n N What should I do if a message appears notifying of either incompatibility or the improper installation of the battery pack and my computer then enters Hibernate mode?
This problem could be due to the battery pack not being installed properly. To resolve this problem, turn off your computer and remove the battery pack. Then reinstall the battery pack to the computer. For details, see Installing/Removing the Battery Pack (page 25). US model_BGN If the problem persists after performing the above, it means the installed battery pack is not compatible. Remove the battery pack and contact an authorized Sony Service Center. To find the nearest center or agent, see Finding More about Your VAIO Computer (page 6). US model_END Except US model_BGN If the problem persists after performing the above, it means the installed battery pack is not compatible. Remove the battery pack and contact VAIO HelpdeskVAIO-LinkVAIO HelpdeskSony Computing SupportVAIO-LinkVAIO HelpdeskSony Computing Support. Except US model_END Why does the System Properties window display a slower CPU speed than the maximum?
This is normal. Because your computer's CPU utilizes a type of CPU speed controlling technology for power conservation purposes, System Properties may display the current CPU speed instead of the maximum speed. Troubleshooting >
Computer 105n N What should I do if my computer does not accept my password and returns a message, Enter Onetime Password?
If you enter a wrong power-on password three times consecutively, the Enter Onetime Password message appears and Windows will not start. Press and hold the power button for more than four seconds to check that the power indicator light turns off. Wait for 10 or 15 seconds, then restart your computer and enter the correct password. When entering the password, check that the Num lock and Caps lock indicator lights are unlit. If both or either of the lights is lit, press the Num Lk (or Num Lock) key or the Caps Lock key to turn off the indicator light before entering the password. What should I do if my game software does not work or it keeps crashing?
Check the web site of the game if there are any patches or updates to download. Make sure you have installed the latest video driver software. On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in such a case is not guaranteed. What should I do if I cannot remember the power-on password?
US model_BGN If you have forgotten the power-on password, contact an authorized Sony Service Center to reset it. A reset fee will be charged. To find the nearest center or agent, see Finding More about Your VAIO Computer (page 6). US model_END Except US model_BGN If you have forgotten the power-on password, contact VAIO HelpdeskVAIO-LinkVAIO HelpdeskSony Computing SupportVAIO-LinkVAIO HelpdeskSony Computing Support to reset it. A reset fee will be charged. Except US model_END Troubleshooting >
Computer 106n N How can I change the boot device order?
You can use one of the BIOS functions to change the boot device order. Follow these steps:
1 Turn on your computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Press the < or , key to select Boot. IRX-4860_BGN 4 Press the M or m key to select the drive whose boot device order you want to change. 5 Press the F5 or F6 key to change the boot device order. IRX-4860_END Except IRX-4860_BGN 6 Press the M or m key to select your desired priority under Boot Priority and press the Enter key. 7 Press the M or m key to select the device to which you want to assign the priority and press the Enter key. Except IRX-4860_END 8 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. At the confirmation prompt, press the Enter key. Why doesn't my screen turn off after the automatic turn-off time has passed?
The VAIO original screen saver disables the timer setting, which you can select using the Windows power options, for your screen to turn off. Select a screen saver other than the VAIO original screen saver. Troubleshooting >
Computer 107n N What should I do if I cannot boot my computer from the external device connected to the computer?
Except IRX-4860_BGN To boot your computer from the external device, for example the USB floppy disk drive or the USB/i.LINK optical disc drive, you need to change the boot device. Except IRX-4860_END IRX-4860_BGN To boot your computer from the external device, for example the USB floppy disk drive or the USB optical disc drive, you need to change the boot device. IRX-4860_END Turn on your computer and press the F11 key when the VAIO logo appears. How do I reduce the volume of the recovery partition?
Your built-in storage device contains the recovery partition where the data for the system recovery is stored. If your computer includes a solid state drive, you might want to reduce the volume of the recovery partition by following these steps:
Except IRX-4860_BGN 1 Insert a recovery disc into the optical disc drive while your computer is on, turn off the computer, and then turn it on once again. Except IRX-4860_END IRX-4860_BGN 1 Insert a recovery disc into an external optical disc drive (not supplied) while your computer is on, turn off the computer, and then turn it on once again. 2 Press the F11 key when the VAIO logo appears during the startup process. 108n N Troubleshooting >
Computer IRX-4860_END
Use recovery disc(s) you created upon delivery of your computer. 3 Select your keyboard layout from the drop-down list and click Next. 4 Select your operating system and click Next. 5 Click VAIO Recovery Center. 6 Click Restore Complete System and Start. 7 Select Skip and click Next. You will be prompted to select whether or not to keep the VAIO Value-added contents. 8 Select No and click Next. 9 Follow the on-screen instructions.
The above procedure involves system recovery. The applications and data you added on the storage drive before reducing the volume of the recovery partition will all be lost. Once you have reduced the volume of the recovery partition, you need the recovery disc(s) for later system recovery. How do I check the volume of the recovery partition?
Your built-in storage device contains the recovery partition where the data for the system recovery is stored. To check the volume of the recovery partition, follow these steps:
1 Click Start, right-click Computer, and select Manage. 2 Click Disk Management under Storage in the left pane. The volume of the recovery partition and the total volume of the C drive are displayed in the Disk 0 row in the center pane. Troubleshooting >
System Security 109n N System Security How can I protect my computer against security threats, such as viruses?
The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against security threats, such as viruses, is to download and install the latest Windows updates regularly. You can get important Windows updates by doing the following:
Your computer must be connected to the Internet to download the updates. 1 Click Start and Control Panel. 2 Click System and Security. 3 Click Action Center. 4 Follow the on-screen instructions to set up automatic or scheduled updates. How do I keep my antivirus software updated?
US model_BGN You can keep the Norton Internet Security software program current with the latest updates from Symantec Corporation. To download and install the latest security updates, follow these steps:
Your computer must be connected to the Internet to download the updates. 1 Click Start, All Programs, Norton Internet Security, and LiveUpdate. 2 Follow the on-screen instructions to complete the updates. US model_END Troubleshooting >
Battery Except US model_BGN 110n N You can keep the McAfee software program current with the latest updates from McAfee, Inc. To download and install the latest security updates, follow these steps:
Your computer must be connected to the Internet to download the updates. 1 Click Start, All Programs, McAfee, and McAfee SecurityCenter. 2 Click the button located at the upper left corner of the window to update the software. 3 Follow the on-screen instructions to download updates. See the help file included with your software program for more information. Except US model_END Battery How do I find the battery charging status?
You can check the charge indicator for the battery charging status. See Charging the Battery Pack (page 28) for more information. When is my computer using AC power?
When your computer is connected to an AC outlet with the AC adapter, it uses AC power, even if the battery pack is installed. When should I recharge the battery pack?
Recharge the battery pack when:
The battery pack is running out of power and both the charge and power indicator lights blink. Troubleshooting >
Built-in Camera 111n N You have not used the battery pack for a long period of time. When should I replace the battery pack?
If the battery pack quickly runs out of power after being fully charged, it may be reaching the end of its life and should be replaced. Should I be concerned that the installed battery pack is warm?
No, it is normal for the battery pack to be warm while it is powering your computer. Can my computer enter Hibernate mode while running on battery power?
Your computer can enter Hibernate mode while running on battery power, but some software programs and peripheral devices prevent the system from entering Hibernate mode. If you are using a program that prevents the system from entering Hibernate mode, save your data frequently to avoid losing data. See Using Hibernate Mode (page 32) for information on how you can manually activate Hibernate mode. Built-in Camera Why does the viewfinder show no images or poor-quality images?
The built-in camera cannot be shared by more than one software application. Exit the current application before launching another. The viewfinder may show some noise, for example horizontal streaks, when you are viewing a rapid-moving object. This is normal and does not indicate a malfunction. If the problem persists, restart your computer. Troubleshooting >
Built-in Camera 112n N Why are captured images poor in quality?
The images captured under the fluorescent light may show reflections of light. A dark portion in captured images may appear as a noise. If the lens protection cover is dirty, you cannot take a clear shot. Clean the cover. See Handling the Built-in Camera
(page 95). What should I do if captured images flicker?
This problem occurs when you use the camera under fluorescent lights due to a mismatch between the lighting output frequency and the shutter speed. To reduce flicker noise, change the direction of the camera or the brightness of camera images. In some software applications, you can set an appropriate value to one of the camera properties (e.g. light source, flicker, etc.) to eliminate flicker noise. Why is the video input from the built-in camera suspended for a few seconds?
The video input may be suspended for a few seconds if:
a shortcut key with the Fn key is used. the CPU load increases. This is normal and does not indicate a malfunction. What should I do if my computer becomes unstable when it enters a power saving mode while the built-in camera is in use?
If your computer automatically enters Sleep or Hibernate mode, change the corresponding power saving mode setting. To change the setting, see Using the Power Saving Modes (page 30). Troubleshooting >
Networking 113n N Networking What should I do if my computer cannot connect to a wireless LAN access point?
Connection capability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using. Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer. Make sure power to the access point is on. Euro model_BGN Except IRX-4860_BGN If you want to connect your computer to a wireless LAN access point using the 5 GHz band, make sure the option to use the 5 GHz band or both the 2.4 GHz and 5 GHz bands is selected for Wireless LAN Settings in the VAIO Smart Network settings window. Wireless LAN communication (IEEE 802.11a standard) using only the 5 GHz band, available on selected models only, is disabled by default. Euro model_END GVD model_BGN If you want to connect your computer to a wireless LAN access point using the 5 GHz band, make sure the option to use the 5 GHz band or both the 2.4 GHz and 5 GHz bands is selected for Wireless LAN Settings in the VAIO Smart Network settings window. Wireless LAN communication (IEEE 802.11a standard) using only the 5 GHz band, available on selected models only, is disabled by default. GVD model_END China model_BGN Troubleshooting >
Networking 114n N If you want to connect your computer to a wireless LAN access point using the 5 GHz band, make sure the option to use the 5 GHz band or both the 2.4 GHz and 5 GHz bands is selected for Wireless LAN Settings in the VAIO Smart Network settings window. Wireless LAN communication (IEEE 802.11a standard) using only the 5 GHz band, available on selected models only, is disabled by default. China model_END Except IRX-4860_END Follow these steps to check the settings:
1 Click Start and Control Panel. 2 Click View network status and tasks under Network and Internet. 3 Click Connect to a network to confirm that your access point is selected. Make sure the encryption key is correct. Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. To change the settings, follow these steps:
1 Right-click the power status icon on the taskbar and select Power Options. 2 Click Change plan settings. 3 Click Change advanced power settings. 4 Select the Advanced settings tab. 5 Double-click Wireless Adapter Settings and Power Saving Mode. 6 Select Maximum Performance from the drop-down list both for On battery and Plugged in. What should I do if I cannot access the Internet?
Check the access point settings. See the manual that came with your access point for more information. Make sure your computer and the access point are connected to one another. Troubleshooting >
Networking 115n N Move your computer away from obstacles or closer to any access point you may be using. Make sure your computer is properly configured for Internet access. Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot connect to a wireless LAN access point? (page 113) to change the settings. Why is the data transfer speed slow?
The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed, move your computer away from obstacles or closer to any access point you may be using. If you are using a wireless LAN access point, the device may be temporarily overloaded depending on how many other devices are communicating via the access point. If your access point interferes with other access points, change the access point channel. See the manual that came with your access point for more information. Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot connect to a wireless LAN access point? (page 113) to change the settings. How do I avoid data transfer interruptions?
While your computer is connected to an access point, data transfer interruptions may occur if a large file is exchanged or the computer is placed in close proximity to microwaves and cordless telephones. Move your computer closer to the access point. Make sure the access point connection is intact. Change the access point channel. See the manual that came with your access point for more information. Troubleshooting >
Networking 116n N Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot connect to a wireless LAN access point? (page 113) to change the settings. What are channels?
Wireless LAN communication uses divided frequency bands known as channels. Third-party wireless LAN access point channels may be preset to different channels from Sony devices. If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your access point. Why does the network connection stop when I change the encryption key?
Two computers with the wireless LAN function may lose a peer-to-peer network connection if the encryption key is changed. You can either change the encryption key back to the original profile or re-enter the key on both computers so the key matches. Except US model_BGN What should I do if my computer cannot connect to the wireless WAN?
Make sure the battery pack is installed properly and charged. Make sure the SIM card is 3G data enabled and activated by your telecom operator. When inserting the SIM card, be sure to follow the procedure in Inserting a SIM Card (page 57). Your mobile phone network needs to cover your area. Contact your network provider for information on the network coverage. Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer. Make sure the switch next to Wireless WAN is set to On in the VAIO Smart Network window. Troubleshooting >
Bluetooth Technology 117n N You may need to manually enter Access Point Name (APN) information in your connection manager software. In such a case, make sure you have correct APN information from your telecom operator. See the help file included with the connection manager software for more information. Check that your connection manager software has detected the wireless WAN modem successfully. It may take some time for the software to detect the wireless WAN modem. Euro model_BGN For further information on the wireless WAN function, visit the VAIO support web site at http://www.vaio-link.com/troubleshoot/wwan/ regularly. Euro model_END Except US model_END Bluetooth Technology What should I do if other Bluetooth devices cannot find my computer?
Make sure both devices have the Bluetooth function enabled. Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer. You cannot use the Bluetooth function while your computer is in a power saving mode. Bring the computer back to Normal mode, then turn on the WIRELESS switch. US model_BGN Your computer and the device may be too far apart. Wireless Bluetooth technology works best when the devices are within 33 feet (10 meters) of each other. US model_END Except US model_BGN Troubleshooting >
Bluetooth Technology 118n N Your computer and the device may be too far apart. Wireless Bluetooth technology works best when the devices are within 10 meters of each other. Except US model_END What should I do if I cannot find the Bluetooth device I want to communicate with?
Check that the Bluetooth function of the device you want to communicate with is on. See the other device's manual for more information. If the device you want to communicate with is already communicating with another Bluetooth device, it may not be found or it may not be able to communicate with your computer. To allow other Bluetooth devices to communicate with your computer, follow these steps:
1 Click Start and Devices and Printers. 2 Right-click the Bluetooth device icon and click Bluetooth settings. 3 Click the Options tab and select the Allow Bluetooth devices to find this computer check box. What should I do if other Bluetooth devices cannot connect to my computer?
Check the suggestions in What should I do if I cannot find the Bluetooth device I want to communicate with? (page 118). Make sure the other devices are authenticated. US model_BGN The data transfer distance can be shorter than 33 feet (10 meters) depending on existing obstacles between the two devices, on radio wave quality, and on the operating system or the software in use. Move your computer and Bluetooth devices closer to each other. US model_END Troubleshooting >
Bluetooth Technology Except US model_BGN 119n N The data transfer distance can be shorter than 10 meters depending on existing obstacles between the two devices, on radio wave quality, and on the operating system or the software in use. Move your computer and Bluetooth devices closer to each other. Except US model_END Why is my Bluetooth connection slow?
The data transfer speed depends on the obstructions and/or the distance between the two devices, on the radio wave quality, and on the operating system or the software in use. Move your computer and Bluetooth devices closer to each other. The 2.4 GHz radio frequency used by Bluetooth and wireless LAN devices is also used by other devices. Bluetooth devices incorporate technology that minimizes interference from other devices using the same wavelength, however, communication speed and connection range may be reduced. Interference from other devices may also stop communications altogether. Connection capability is affected by distance and obstructions. You may need to move your computer away from obstacles or closer to the device to which it is connected. Identify and remove obstacles between your computer and the device to which it is connected. Why can't I use the services supported by the connected Bluetooth device?
Connection is only possible for services also supported by the computer with the Bluetooth function. For more details, search Windows Help and Support for Bluetooth information. Troubleshooting >
Bluetooth Technology 120n N Can I use a device with Bluetooth technology on airplanes?
With Bluetooth technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals and airplanes, may have restrictions on use of Bluetooth devices to avoid radio interference. Check with facility staff to see if use of the Bluetooth function on the computer is permitted. Why can't I use the Bluetooth function when I log onto my computer as a user with a standard user account?
The Bluetooth function may not be available to a user with a standard user account on your computer. Log onto the computer as a user with administrative rights. Why can't I use the Bluetooth devices when I switch users?
If you switch users without logging off your system, the Bluetooth devices will not work. Be sure to log off before switching users. To log off your system, click Start, the arrow next to the Shut down button, and Log off. Why can't I exchange business card data with a mobile phone?
The business card exchange function is not supported. What should I do if I do not hear sound from my headphones or audio/video controller?
Check the SCMS-T settings. If your headphones or audio/video controller does not support SCMS-T content protection, you need to connect the device using the Advanced Audio Distribution Profile (A2DP). Follow these steps:
1 Click Start and Devices and Printers. 2 Right-click the icon for the device that you want to connect using the A2DP and select Control. 3 Click SCMS-T Settings. Troubleshooting >
GPS 121n N 4 Click to cancel the Connect to a device only if it supports SCMS-T content protection check box. Except US model_BGN What should I do if the Bluetooth icon is not displayed on the taskbar?
Make sure that the switch next to Bluetooth is set to On in the VAIO Smart Network window. To display the Bluetooth icon on the taskbar, follow these steps:
1 Click Start and Devices and Printers. 2 Right-click the Bluetooth device icon and click Bluetooth settings. 3 Click the Options tab and select the Show the Bluetooth icon in the notification area check box. Except US model_END Euro model_BGN GPS What should I do if I cannot use the GPS function?
Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer. Make sure the switch next to GPS is set to On in the VAIO Smart Network window. What should I do if I cannot obtain location information or if the current location obtained is incorrect?
Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer. Make sure the switch next to GPS or Wireless LAN is set to On in the VAIO Smart Network window. Troubleshooting >
Display 122n N To successfully obtain location information, your current location must be free of obstacles. Move around to find an optimum location for receiving GPS information. Euro model_END Display Why did my screen go blank?
Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If the computer is in LCD (Video) Sleep mode, press any key to bring the computer back into Normal mode. See Using the Power Saving Modes (page 30) for more information. Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit. If your computer is running on battery power, make sure the battery pack is installed properly and is charged. See Using the Battery Pack (page 24) for more information. If the display output is directed to the external display, press the Fn+F7 keys. See Combinations and Functions with the Fn Key (page 34) for more information. What should I do if I do not see proper images or videos?
Be sure to select True Color (32 bit) for the display colors before using video/image software or starting DVD playback. Selecting any other option may prevent such software from displaying images successfully. To change the display colors, follow these steps:
1 Right-click on the desktop and select Screen resolution. 2 Click Advanced settings. 3 Click the Monitor tab. 4 Select True Color (32 bit) under Colors. Troubleshooting >
Display 123n N Do not change the display resolution or colors while using video/image software or playing DVDs, as it may cause unsuccessful playback/display or unstable system operations. Additionally, it is recommended you disable your screen saver before starting DVD playback. If the screen saver is enabled, it may be activated during DVD playback and prevent the playback from running successfully. Some screen savers have been found to even change the display resolution and colors. Why doesn't my screen display a video?
If the display output is directed to the external display and the external display is disconnected, you cannot display a video on your computer screen. Stop video playback, change the display output to the computer screen, and then restart video playback. See Selecting Display Modes (page 72) for changing the display output. Alternatively, you can press the Fn+F7 keys to change the display output. See Combinations and Functions with the Fn Key (page 34) for more information. The video memory of your computer may be insufficient for displaying high resolution videos. In such a case, lower the resolution of the LCD screen. To change the screen resolution, follow these steps:
1 Right-click on the desktop and select Screen resolution. 2 Click the drop-down list next to Resolution. 3 Move the slider up to increase or down to decrease the screen resolution. You can check the total amount of the graphics and video memory available. Right-click on the desktop, select Screen resolution, and click Advanced Settings and the Adapter tab. The displayed value may be different from the actual amount of memory on your computer. What should I do if my screen is dark?
Press the Fn+F6 keys to brighten your computer screen. Troubleshooting >
Display 124n N What should I do if the LCD brightness of my screen changes?
LCD brightness, adjusted by the Fn+F5/F6 keys, is only temporary and may be restored to the original level when your computer returns to Normal mode from Sleep or Hibernate mode. To save your preference for the brightness, follow these steps:
1 Right-click the power status icon on the taskbar and select Power Options. 2 Click Change plan settings on the right of the current power plan. 3 Click Change advanced power settings. 4 Select the Advanced settings tab. 5 Double-click Display. 6 Double-click Display brightness. 7 Click your desired item and adjust the LCD brightness setting. What should I do if the external display remains blank?
If you cannot change the display output with the Fn+F7 keys, you need to change the settings for the external display with the VAIO Control Center. To change the settings, launch the VAIO Control Center, select the control item for the external display, and then click to select the check box for changing the options to detect the external display. Then, use the Fn+F7 keys to change the display output. How do I run Windows Aero?
To run Windows Aero, follow these steps:
1 Right-click on the desktop and select Personalize. 2 Select your desired theme from Aero Themes. For information about the Windows Aero features, such as Windows Flip 3D, see Windows Help and Support. Troubleshooting >
Printing 125n N Printing What should I do if I cannot print a document?
Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and your computer. Make sure your printer is compatible with the Windows operating system installed on your computer. You may need to install the printer driver software before you use your printer. See the manual that came with your printer for more information. If your printer is not functioning after your computer resumes from a power saving mode (Sleep or Hibernate), then restart the computer. If the bidirectional communication functions are provided with your printer, disabling the functions on your computer may enable printing. Follow these steps:
1 Click Start and Devices and Printers. 2 Right-click the printer icon and select Properties. 3 Click the Ports tab. 4 Click to cancel the Enable bidirectional support check box. 5 Click OK. This disables the bidirectional communication functions of the printer, such as data transfer, status monitoring, and remote panel. Speakers Except IRX-4860_BGN Troubleshooting >
Speakers 126n N What should I do if I do not hear sound from the built-in speakers?
If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information. The volume may have been turned off by the Fn+F2 keys. Press them once again. The volume may have been minimized by the Fn+F3 keys. Keep pressing the Fn+F4 keys to turn up the volume loud enough to hear sound. Check the Windows volume controls by clicking the volume icon on the taskbar. Except IRX-4860_END IRX-4860_BGN What should I do if I do not hear sound from the built-in speaker?
If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information. The volume may have been turned off by the Fn+F2 keys. Press them once again. The volume may have been minimized by the Fn+F3 keys. Keep pressing the Fn+F4 keys to turn up the volume loud enough to hear sound. Check the Windows volume controls by clicking the volume icon on the taskbar. Your sound output device may have been incorrectly configured. To change the sound output device, see How do I change the sound output device? (page 130). IRX-4860_END What should I do if my external speakers do not work?
Except IRX-4860_BGN Check the suggestions in What should I do if I do not hear sound from the built-in speakers? (page 126). Troubleshooting >
Touch Pad 127n N Except IRX-4860_END IRX-4860_BGN Check the suggestions in What should I do if I do not hear sound from the built-in speaker? (page 126). IRX-4860_END Make sure your speakers are properly connected and the volume is turned up loud enough to hear sound. Make sure your speakers are designed for computer use. If your speakers have a muting button, set the button to off. If your speakers require external power, make sure the speakers are connected to a power source. See the manual that came with your speakers for more information. Touch Pad What should I do if the touch pad does not work?
You may have disabled the touch pad before connecting a mouse to your computer. See Using the Touch Pad (page 35). Make sure that a mouse is not connected to your computer. If the pointer does not move while a software application is running, press the Alt+F4 keys to close the application window. If the Alt+F4 keys do not work, press the Windows key once and then the , key several times, select Restart with the M or m key, and press the Enter key to restart your computer. If your computer does not restart, press the Ctrl+Alt+Delete keys, select the arrow next to the Shut down button with the m and , keys, press the Enter key, select Restart with the M or m key, and press the Enter key to restart your computer. If this procedure does not work, press and hold the power button until the computer turns off.
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data. Troubleshooting >
Keyboard 128n N Keyboard What should I do if the keyboard configuration is wrong?
The language layout of your computer's keyboard is labeled on the packaging box. If you choose a different regional keyboard when you complete the Windows setup, the key configuration will be mismatched. To change the keyboard configuration, follow these steps:
1 Click Start and Control Panel. 2 Click Clock, Language, and Region, and then Change keyboards or other input methods under Region and Language. 3 Click Change keyboards on the Keyboards and Languages tab. 4 Change the settings as desired. What should I do if I cannot enter certain characters with the keyboard?
If you cannot enter U, I, O, P, J, K, L, M, and so on, the Num Lk key may be activated. Check that the Num lock indicator light is unlit. If the Num lock indicator is lit, press the Num Lk key to turn it off before entering these characters. Floppy Disks Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is connected?
Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps:
Troubleshooting >
Audio/Video 129n N 1 Close all programs that are accessing the floppy disk drive. 2 Wait until the indicator light on the floppy disk drive turns off. 3 Push the eject button to remove the disk, and unplug the USB floppy disk drive from your computer. 4 Reconnect the floppy disk drive by plugging the USB cable into the USB port. 5 Restart the computer by clicking Start, the arrow next to the Shut down button, and Restart. What should I do if I cannot write data to a floppy disk?
Make sure the floppy disk is properly inserted in the drive. If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected. You can either use a floppy disk that is not write-protected or disable the write-protect feature. Audio/Video How do I turn off the Windows startup sound?
To turn off the Windows startup sound, follow these steps:
1 Click Start and Control Panel. 2 Click Hardware and Sound. 3 Click Manage audio devices under Sound. 4 On the Sounds tab, click to cancel the Play Windows Startup sound check box. 5 Click OK. Troubleshooting >
Audio/Video 130n N How do I change the sound output device?
If you do not hear sound from the device connected to a port, such as the USB port, HDMI output port, optical output port, or headphones jack, you need to change the device for sound output. 1 Close all open programs. 2 Click Start and Control Panel. 3 Click Hardware and Sound. 4 Click Manage audio devices under Sound. 5 On the Playback tab, select your desired device for sound output and click Set Default. What should I do if I do not hear the sound from the sound output device connected to the HDMI output port, optical output port, or headphones jack?
Except IRX-4860_BGN You need to change the sound output device if you want to hear sound from the device connected to a port, such as the HDMI output port, optical output port, or headphones jack. For the detailed procedure, see How do I change the sound output device? (page 130). If you still hear no sound from the sound output device, follow these steps:
1 Follow steps 1 to 4 in How do I change the sound output device? (page 130). 2 On the Playback tab, select the HDMI or S/PDIF icon and click Properties. 3 Click the Advanced tab. 4 Select the sample rate and bit depth (for example, 48000 Hz, 16 bit) which the device supports. 5 Click OK. Except IRX-4860_END Troubleshooting >
Memory Cards IRX-4860_BGN 131n N You need to change the sound output device if you want to hear sound from the device connected to a port, such as the HDMI output port, optical output port, or headphones jack. For the detailed procedure, see How do I change the sound output device? (page 130). IRX-4860_END Why do sound interruptions and/or dropped frames occur when I play high-definition videos, such as those recorded with the AVCHD digital video camcorder?
Playing high-definition videos requires substantial hardware resources, such as CPU, GPU, or system memory performance on your computer. During the video playback, some operations and/or functions may become unavailable, and sound interruptions, dropped frames, and playback failure may occur depending on the configuration of your computer. Memory Cards What should I do if I cannot find any memory card icons in the Computer window?
The "Memory Stick Duo" icon and the SD / MMC icon do not appear in the Computer window before you insert either of the media. Insert "Memory Stick" or a memory card. It may take some time but both icons eventually appear in the Computer window. What should I do if I cannot use "Memory Stick" that was formatted on a VAIO computer on other devices?
You may need to reformat your "Memory Stick". Formatting "Memory Stick" erases all data, including music data previously saved on it. Before you reformat "Memory Stick", back up important data and confirm that "Memory Stick" does not contain files you want to keep. Troubleshooting >
Peripherals 132n N 1 Copy the data from "Memory Stick" onto your built-in storage device to save data or images. 2 Format "Memory Stick" by following the steps in Formatting "Memory Stick" (page 41). Can I copy images from a digital camera using "Memory Stick"?
Yes, and you can view video clips that you have recorded with digital cameras that are compatible with "Memory Stick". Why can't I write data to "Memory Stick"?
Some versions of "Memory Stick" are equipped with an erasure prevention switch to protect data from unintentional erasure or overwriting. Make sure the erasure prevention switch is off. Peripherals What should I do if I cannot connect a USB device?
If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to the AC outlet. Try using another USB port on your computer. The driver software could be installed to the specific port you used the first time you connected the device. See the manual that came with your USB device for more information. You may need to install software before you connect the device. Try connecting a simple, low-powered device such as a mouse to test if the port is working at all. USB hubs may prevent a device from working because of a power distribution failure. We recommend you connect the device directly to your computer without a hub. Troubleshooting >
Peripherals Except IRX-4860_BGN 133n N What should I do if I cannot use a peripheral device?
The following built-in devices on your computer may have been disabled in the BIOS setup screen:
USB ports PC Card slot i.LINK port Follow the steps and the tip in Disabling Built-in Devices %%Customizing Your VAIO Computer&&Protecting Data from Unauthorized Use&&Disabling Built-in Devices%% to enable your desired port(s) or slot(s). Except IRX-4860_END Trademarks >
Trademarks US model_BGN 134n N 2009 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Except IRX-4860_BGN Sony, the Sony logo, "Memory Stick", "Memory Stick Duo", "MagicGate", "OpenMG", "OpenMG X", "Memory Stick PRO Duo",
"Memory Stick PRO", "Memory Stick PRO-HG Duo", "Memory Stick Micro", "M2", the "Memory Stick" logo, Micro Vault, Micro Vault EX, MOTION EYE, Sony Style, DVgate, DVgate Plus, i.LINK, VAIO Care, VAIO Media, VAIO Media Music Server, VAIO Media Photo Server, VAIO Media Console, VAIO Sphere, VAIO World, VAIO Zone, Vegas, VAIO Media Video Server, Click to BD, G-Sensor, like.no.other, Handycam, LocationFree Player, SonicStage, SonicFlow, SmartWi, ATRAC, ATRAC3plus, XBRITE, XBRITE DuraView, XBRITE-ECO, XBRITE-Full HD, and XBRITE-HiColor are trademarks or registered trademarks of Sony Corporation. Except IRX-4860_END IRX-4860_BGN Sony, the Sony logo, "Memory Stick", "Memory Stick Duo", "MagicGate", "OpenMG", "OpenMG X", "Memory Stick PRO Duo",
"Memory Stick PRO", "Memory Stick PRO-HG Duo", "Memory Stick Micro", "M2", the "Memory Stick" logo, Micro Vault, Micro Vault EX, MOTION EYE, Sony Style, DVgate, DVgate Plus, VAIO Care, VAIO Media, VAIO Media Music Server, VAIO Media Photo Server, VAIO Media Console, VAIO Sphere, VAIO World, VAIO Zone, Vegas, VAIO Media Video Server, Click to BD, G-Sensor, like.no.other, Handycam, LocationFree Player, SonicStage, SonicFlow, SmartWi, ATRAC, ATRAC3plus, XBRITE, XBRITE DuraView, XBRITE-ECO, XBRITE-Full HD, and XBRITE-HiColor are trademarks or registered trademarks of Sony Corporation. IRX-4860_END VAIO, the VAIO logo, MY MEMORY CENTER, Backstage, Backstage Access, VAIO DIGITAL STUDIO, LOCATIONFREE, HDNA, and the HDNA logo are trademarks or registered trademarks of Sony Electronics Inc. Intel, Centrino, Core, Celeron, Xeon, and Pentium are trademarks or registered trademarks of Intel Corporation in the United States and/or other countries. Trademarks >
135n N Microsoft, Windows, Windows Media, Windows Mobile, Windows NT, Windows Vista, BitLocker, Outlook, Excel, MS-DOS, PowerPoint, ReadyBoost, Internet Explorer, Aero, Windows Live, OneCare, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Blu-ray Disc and the Blu-ray Disc logo are trademarks of the Blu-ray Disc Association. IRX-4860_BGN The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. SD Logo is a trademark. SDHC Logo is a trademark. IRX-4860_END
"AVCHD" is a trademark of Panasonic Corporation and Sony Corporation. Dolby is a registered trademark of Dolby Laboratories. All other names of systems, products, and services are trademarks of their respective owners. In the manual, the or marks may not be specified. Features and specifications are subject to change without notice. All other trademarks are trademarks of their respective owners. US model_END Euro model_BGN Sony, VAIO, the VAIO logo, VAIO Control Center, VAIO Power Management, VAIO Power Management Viewer, VAIO Update, and "BRAVIA" are trademarks or registered trademarks of Sony Corporation. Trademarks >
136n N and "Memory Stick", "Memory Stick Duo", "MagicGate", "OpenMG", "Memory Stick PRO", "Memory Stick PRO Duo", "Memory Stick PRO-HG Duo", "Memory Stick Micro", "M2", and the "Memory Stick" logo are trademarks or registered trademarks of Sony Corporation. Walkman is a registered trademark of Sony Corporation. Blu-ray Disc and the Blu-ray Disc logo are trademarks of the Blu-ray Disc Association. Intel, Pentium, Intel SpeedStep, and Atom are trademarks or registered trademarks of Intel Corporation. Microsoft Windows Vista, the Windows logo, and BitLocker are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. Roxio Easy Media Creator is a trademark of Sonic Solutions. WinDVD for VAIO and WinDVD BD for VAIO are trademarks of InterVideo, Inc. ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. ArcSoft WebCam Companion is a trademark of ArcSoft, Inc. ATI and ATI Catalyst are trademarks of Advanced Micro Devices, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. SD Logo is a trademark. Trademarks >
137n N SDHC Logo is a trademark. CompactFlash is a trademark of SanDisk Corporation. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
"PlaceEngine" is a registered trademark of Koozyt, Inc.
"PlaceEngine" was developed by Sony Computer Science Laboratories, Inc. and is licensed by Koozyt, Inc.
, "XMB," and "xross media bar" are trademarks of Sony Corporation and Sony Computer Entertainment Inc.
"AVCHD" is a trademark of Panasonic Corporation and Sony Corporation. All other names of systems, products, and services are trademarks of their respective owners. In the manual, the or marks are not specified. Specifications are subject to change without notice. All other trademarks are trademarks of their respective owners. Not all the software listed above may be delivered with your model. See the online specifications to find out what software is available for your model. Euro model_END GVD model_BGN Except Euro_BGN Except US model_BGN The trademarks, including but not limited to Sony, the Sony logo, VAIO, the VAIO logo are either trademarks or registered trademarks of Sony Corporation. GVD model_END China model_BGN Sony, the Sony logo, VAIO and the VAIO logo are registered trademarks of Sony Corporation. Trademarks >
China model_END 138n N and "Memory Stick", "Memory Stick Duo", "MagicGate", "OpenMG", "Memory Stick PRO", "Memory Stick PRO Duo", "Memory Stick PRO-HG Duo", "Memory Stick Micro", "M2", and the "Memory Stick" logo are trademarks or registered trademarks of Sony Corporation. Blu-ray Disc and the Blu-ray Disc logo are trademarks of the Blu-ray Disc Association. Except IRX-4860_BGN i.LINK is a designation referring to IEEE 1394-1995 and IEEE 1394a-2000. i.LINK and the i.LINK logo "
Sony Corporation.
" are trademarks of Except IRX-4860_END Intel, Pentium, and Intel SpeedStep are trademarks or registered trademarks of Intel Corporation. Microsoft, MS-DOS, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. IRX-4860_BGN The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. SD Logo is a trademark. SDHC Logo is a trademark. IRX-4860_END
"AVCHD" is a trademark of Panasonic Corporation and Sony Corporation. Trademarks >
139n N All other names of systems, products, and services are trademarks of their respective owners. In the manual, the or marks are not specified. Specifications are subject to change without notice. All other trademarks are trademarks of their respective owners. GVD model_BGN See the printed specifications sheet to find out what software is available for your model. GVD model_END China model_BGN Not all the software listed above may be delivered with your model. China model_END Except US model_END Except Euro_END Notice >
140n N Notice 2009 Sony Corporation. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval. Sony Corporation provides no warranty with regard to this manual, the software, or other information contained herein and hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this manual, the software, or such other information. In no event shall Sony Corporation be liable for any incidental, consequential, or special damages, whether based on tort, contract, or otherwise, arising out of or in connection with this manual, the software, or other information contained herein or the use thereof. In the manual, the or marks are not specified. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement. Sony Corporation is not liable and will not compensate for any lost recordings made to your computer, external recording media, or recording devices or any relevant losses, including when recordings are not made due to reasons including your computer failure, or when the contents of a recording are lost or damaged as a result of your computer failure or repair undertaken to your computer. Sony Corporation will not restore, recover, or replicate the recorded contents made to your computer, external recording media, or recording devices under any circumstances. n 2009 Sony Corporation
1 2 3 | User Manual Safety Guide | Users Manual | 893.25 KiB | February 09 2009 |
4860_LegalSafety.fm Page 1 Thursday, June 25, 2009 4:39 PM Safety Information Renseignements relatifs la scurit Informacin de Seguridad Informaes sobre Segurana Personal Computer / Ordinateur personnel /
Computadora Personal / Computador Pessoal VPCX11 Series IMPORTANTE!
Por favor lea detalladamente este manual de instrucciones antes de conectar y operar este equipo. Recuerde que un mal uso de su aparato podra anular la garanta. 4860_LegalSafety.fm Page 2 Thursday, June 25, 2009 4:39 PM For customers in USA and Canada Pour les utilisateurs aux Etats-Unis et au Canada Owners Record The model number and serial number are located on the bottom, the back panel, or inside the battery compartment of your Sony VAIO computer. Record the model and serial numbers in the space provided here, and keep in a secure location. Refer to the model and serial numbers when you call your Sony Service Center. Model Number:
Serial Number:
Notice 2009 Sony Electronics Inc. Reproduction in whole or in part without written permission is prohibited. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval. SONY ELECTRONICS INC. PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION. IN NO EVENT SHALL SONY ELECTRONICS INC. BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. SONY CANNOT WARRANT THAT THE FUNCTIONS DESCRIBED IN THIS GUIDE WILL BE UNINTERRUPTED OR ERROR-FREE. SONY ALSO ASSUMES NO RESPONSIBILITY, AND SHALL NOT BE LIABLE FOR ANY DAMAGES TO, OR VIRUSES THAT MAY INFECT, YOUR COMPUTER EQUIPMENT, OR OTHER PROPERTY ON ACCOUNT OF YOUR ACCESS TO, USE OF, OR BROWSING IN ANY DESCRIBED WEB SITE, OR YOUR DOWNLOADING OF ANY MATERIALS, DATA, TEXT, IMAGES, VIDEO, OR AUDIO FROM ANY DESCRIBED WEB SITE. WEB SITE INFORMATION IS OBTAINED FROM VARIOUS SOURCES AND MAY BE INACCURATE. COPIES OF COPYRIGHTED INFORMATION MAY ONLY BE MADE FOR LEGALLY PERMISSIBLE PURPOSES. Sony Electronics Inc. reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement. This product contains software owned by Sony and licensed by third parties. Use of such software is subject to the terms and conditions of license agreements enclosed with this product. Some of the software may not be transported or used outside the United States. Software specifications are subject to change without notice and may not necessarily be identical to current retail versions. 2 4860_LegalSafety.fm Page 3 Thursday, June 25, 2009 4:39 PM Certain product(s) included with this computer may include features such as copy protection and content management technology. USE OF THE SOFTWARE PRODUCT(S) REQUIRES AGREEMENT TO APPLICABLE END USER AGREEMENTS AND FULL COMPLIANCE WITH APPLICABLE PRODUCT ACTIVATION PROCEDURES. Product activation procedures and privacy policies will be detailed during initial launch of the software product(s), or upon certain reinstallations of the software product(s), or reconfigurations of the computer, and may be completed by Internet or telephone (toll charges may apply). Updates and additions to software may require an additional charge. Subscriptions to online service providers may require a fee and credit card information. Financial services may require prior arrangements with participating financial institutions. Important information for Canadian customers: Your new VAIO computer includes certain software versions or upgrades, and Internet services or offers that are available to U.S. customers only. i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection. The i.LINK connection may vary, depending on the software applications, operating system, and compatible i.LINK devices. All products with an i.LINK connection may not communicate with each other. Please refer to the documentation that came with your compatible i.LINK device for information on operating conditions and proper connection. Before connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk drive, confirm their operating system compatibility and required operating conditions. Sony, VAIO, and the VAIO logo are trademarks or registered trademarks of Sony Corporation. All other trademarks are trademarks or registered trademarks of their respective owners. The Wireless LAN functionality, which is incorporated into selected models only, has passed Wi-Fi certification and complies with the interoperability specifications established by WFA (Wi-Fi Alliance). Reverse engineering or disassembly is prohibited. End User / Product Activation Requirements Certain software product(s) included with this computer may include features such as copy protection and content management technology. Use of the software product(s) requires agreement to applicable end user agreements and full compliance with applicable product activation procedures. Product activation procedures and privacy policies will be detailed during initial launch of the software product(s), or upon certain reinstallations of the software product(s) or reconfiguration of the computer, and may be completed by Internet or telephone (toll charges may apply). 3 4860_LegalSafety.fm Page 4 Thursday, June 25, 2009 4:39 PM Safety Information and Caution For questions regarding your product or for the Sony Service Center nearest you, visit the Sony online support Web site at http://esupport.sony.com/EN/VAIO/ for customers in USA or at http://www.sony.ca/support/ for customers in Canada. To prevent fire or shock hazard, do not expose your computer to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not use your computer directly on your lap. The temperature of the base of the unit will rise during normal operation and over time could result in discomfort or burns. To prevent possible damage and risk of ignition to your computer during transportation, first attach any supplied connector covers and slot protectors in their appropriate locations, and secure the battery pack in the battery compartment. Always keep the battery pack installed while the computer is in use. Do not use or store your computer in a location subject to heat sources, such as radiators or air ducts; direct sunlight; excessive dust; moisture or rain; mechanical vibration or shock; strong magnets or speakers that are not magnetically shielded; ambient temperature higher than 95F (35C) or less than 40F (5C); and high humidity. Do not charge the battery pack in any way other than as described in the user guide or as designated by Sony in writing. Do not short-circuit the metal terminals of the battery pack or wet them with any liquid, for example, water, coffee, or juice. For your safety, Sony recommends using the genuine Sony battery pack and AC adapter that are provided with this product. If either of these items needs to be replaced during the life of the product, be sure to use a compatible genuine Sony battery pack or AC adapter. Information about compatible models can be found at http://www.sony.com/vaio. Sony disclaims and shall assume no responsibility in case of any losses and damages arising from:
- the use of non-genuine Sony battery packs or AC adapters with your VAIO computer.
- the disassembly, alteration of, or tampering with any Sony battery pack. Do not use wireless LAN on hospital premises. Doing so may cause medical devices to malfunction. Do not use wireless LAN on an aircraft, as doing so may cause the aircraft's equipment to malfunction. If using wireless LAN near a pacemaker, make sure it is at least 8 inches (20 cm) away from the pacemaker. Sony is not responsible for any interference that you may experience or that may be caused when operating this device. Keep small parts away from children. 4 4860_LegalSafety.fm Page 5 Thursday, June 25, 2009 4:39 PM To change the backup battery, please contact your nearest Sony Service Center. Wireless LAN Security Creating security settings for the Wireless LAN is extremely important. Sony assumes no responsibility for any security problems that may arise from the use of the Wireless LAN. Licensed by QUALCOMM Incorporated under one or more of the following Patents:
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501 5,506,865 5,109,390 5,511,073 5,228,054 5,535,239 5,267,261 5,544,196 5,267,262 5,568,483 5,337,338 5,600,754 5,414,796 5,657,420 5,416,797 5,659,569 5,710,784 5,778,338 5 4860_LegalSafety.fm Page 6 Thursday, June 25, 2009 4:39 PM Avertissement Pour toute question concernant ce produit, veuillez crire Sony Customer Information Service Center au 12451 Gateway Blvd., Fort Myers, FL 33913, USA ou se trouve le Sony Customer Service (service consommateur de Sony) sur Internet : http://www.sony.ca/support/. Pour prvenir tout risque dincendie ou dlectrocution, garder cet appareil labri de la pluie et de lhumidit. Pour prvenir tout risque dlectrocution, ne pas ouvrir le chssis de cet appareil et ne confier son entretien qu une personne qualifie. Lappareil doit tre le plus prs possible dune prise murale pour en faciliter laccs. Ne posez pas l'ordinateur directement sur vos genoux. Durant le fonctionnement normal, la temprature augmente et cela pourrait crer un inconfort ou des brlures. Afin de prvenir des indemnits votre ordinateur pendant le transport, attachez dabord tous les volets de connecteurs et protecteurs demplacements comme il convient, et insrez la batterie dans le logement de la batterie. Toujours conserver la batterie installe pendant que lordinateur est en cours dutilisation. vitez d'utiliser ou de ranger votre ordinateur dans un endroit soumis : des sources de chaleur telles que des radiateurs ou des bouches d'aration, la lumire directe du soleil, une poussire excessive, l'humidit ou la pluie, des vibrations ou des chocs mcaniques, des aimants puissants ou des haut-parleurs dpourvus de blindage antimagntique, une temprature ambiante suprieure 35C (95F) ou infrieure 5C (40F), et une forte humidit. N'essayez pas de charger le module batterie d'une autre faon que celle dcrite dans le Guide de l'utilisateur ou dans la documentation crite de Sony. Ne court-circuitez pas les bornes mtalliques de la batterie et ne les humidifiez pas avec un liquide comme de l'eau, du caf ou du jus. Pour votre scurit, Sony recommande d'utiliser uniquement le module batterie et l'adaptateur secteur de marque Sony fournis avec ce produit. Si l'un de ces lments devait tre remplac durant le cycle de vie du produit, veillez utiliser un module batterie ou un adaptateur secteur compatibles de marque Sony. Des informations sur les modles compatibles sont disponibles sur : http://www.sony.com/vaio. Sony rejette toute responsabilit en cas de perte ou de dommages engendrs par l'utilisation de modules batterie ou d'adaptateurs secteur de marque autre que Sony avec votre ordinateur VAIO, ou par le dsassemblage ou l'altration des modules batterie Sony. Ne pas utiliser le rseau local sans fil dans les hpitaux car cela risquerait de provoquer le mauvais fonctionnement des appareils mdicaux. Ne pas utiliser le rseau local sans fil dans un avion car cela risquerait de provoquer le mauvais fonctionnement des appareils de vol. Si vous utilisez le rseau local sans fil proximit dun stimulateur cardiaque, assurez-vous quil est au moins 8 pouces (20 cm) du stimulateur cardiaque. Sony n'est pas responsable des interfrences que vous risquez de rencontrer ou qui risquent d'tre provoques lors du fonctionnement de cet appareil. Garder les petites pices hors de la porte des enfants. 6 4860_LegalSafety.fm Page 7 Thursday, June 25, 2009 4:39 PM Pour changer la pile de rechange, veuillez contacter votre centre de service Sony le plus prs. Scurit du rseau local sans fil La cration de paramtres de scurit pour le rseau local sans fil est extrmement importante. Sony nest pas tenu responsable des problmes de scurit susceptibles de se produire lors de lutilisation du rseau local sans fil. 7 4860_LegalSafety.fm Page 8 Thursday, June 25, 2009 4:39 PM Regulatory Information If you have questions about this product, you can write to the Sony Customer Information Service Center at 12451 Gateway Blvd., Fort Myers, FL 33913, USA or find Sony Customer Service on the Web site at:
http://esupport.sony.com/EN/VAIO/ for customers in USA or http://www.sony.ca/support/ for customers in Canada. The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations. Declaration of Conformity Trade Name:
Model No.:
SONY PCG-21111L, PCG-21112L Responsible Party:
Sony Electronics Inc. Address:
16530 Via Esprillo, San Diego, CA 92127, USA Telephone:
(For FCC-related matters only.) 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC Class B limits may be attached to this computer product. Operation with noncompliant peripherals is likely to result in interference to radio and television reception. All cables used to connect peripherals must be shielded and grounded. Operation with cables connected to peripherals that are not shielded and grounded may result in interference to radio and television reception. 8 4860_LegalSafety.fm Page 9 Thursday, June 25, 2009 4:39 PM Telephone Consumer Protection Act of 1991 (United States) For models with the wireless WAN function only The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains, in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long distance transmission charges.) In order to program this information into your facsimile machine, see your fax software documentation. Industry Canada Notice This Class B digital apparatus complies with Canadian ICES-003. Avis de LIndustrie Canada Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. FCC/IC Radio Frequency Exposure The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The following models (Table 1) that are conformitied have been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. Table 1 Product Name PCG-21111L PCG-21112L FCC ID AK8PCG21111L AK8PCG21112L IC Number 409B-PCG21111L 409B-PCG21112L
(FCC) Please refer to the SAR test report that was uploaded at FCC website.
(IC) Please refer to the information that consult Safety Code 6, obtainable from Health Canada's Website. This device and its antenna(s) must not be co-located or operating with any other antenna or transmitter except Grant condition. Users are not permitted to modify this transmitter device. Any unauthorized changes made to this device could void your authority to operate this device. 9 4860_LegalSafety.fm Page 10 Thursday, June 25, 2009 4:39 PM Exposition aux radiofrquences FCC/IC Selon les preuves scientifiques disponibles, aucun problme de sant n'est associ l'utilisation d'appareils sans fil de faible puissance. Rien ne prouve cependant que ces appareils sont absolument sans danger. Lorsqu'ils sont utiliss, les appareils sans fil de faible puissance mettent de faibles niveaux d'nergie radiofrquence (RF) dans la gamme des hyperfrquences. Bien que les niveaux levs de radiofrquence puissent avoir un effet sur la sant
(rchauffement des tissus), l'exposition de faibles niveaux n'ayant pas d'effet thermique n'a aucun impact ngatif connu sur la sant. De nombreuses tudes sur l'exposition aux radiofrquences de faible niveau n'ont rvl aucun effet biologique. Certaines d'entre elles ont sous-entendu qu'il pourrait y avoir de tels effets, mais leurs rsultats n'ont pas t confirms par des recherches supplmentaires. Les modles suivants (Tableau 1 ) ont t tests et se sont avrs conformes aux limites d'exposition aux rayonnements dfinies par la FCC et IC pour les quipements non contrls ; ils rpondent aux rgles sur l'exposition aux rayonnements RF (radiofrquence) figurant dans le Supplment C de la norme OET65 de la FCC et celles de la norme RSS-102 d'IC. Tableau 1 Nom du produit ID FCC PCG-21111L PCG-21112L AK8PCG21111L AK8PCG21112L Numro IC 409B-PCG21111L 409B-PCG21112L
(FCC) Veuillez vous reporter au rapport de test SAR tlcharg sur le site Web FCC.
(IC) Veuillez vous reporter aux informations relatives au code de scurit 6 que vous pouvez obtenir sur le site Web de Sant Canada. Cet appareil et sa ou ses antennes ne doivent pas tre placs proximit d'autres antennes ou metteurs ni fonctionner avec eux, sauf dans la condition Grant. Les utilisateurs ne sont pas autoriss modifier cet metteur. Toute modification apporte cet metteur peut annuler vos droits d'utilisation de l'appareil. IC RSS-210 (Canada) Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Lutilisation de ce dispositif est autorise seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) lutilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. 10 4860_LegalSafety.fm Page 11 Thursday, June 25, 2009 4:39 PM Personal Medical Devices For models with the wireless WAN function only When Wireless WAN (EV-DO module) power is transmitting, it may affect the operation of cardiac pacemakers and other implanted medical devices. If a minimum distance of 8 inches (20 cm) is kept between the PC and the pacemaker, the risk of interference is reduced. If you have any reason to suspect that interference is taking place, immediately turn off the WAN feature. Contact your cardiologist for more information. For other medical devices, please consult the manufacture of the device. Emergency Calls For models with the wireless WAN function only The embedded EV-DO module does not support voice calls. Recycling Information RECYCLING LITHIUM-ION BATTERIES RECYCLING LITHIUM-ION BATTERIES Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/. RECYCLAGE DES ACCUMULATEURS AUX IONS DE LITHIUM RECYCLAGE DES ACCUMULATEURS AUX IONS DE LITHIUM Les accumulateurs aux ions de lithium sont recyclables. Vous pouvez contribuer prserver lenvironnement en rapportant les piles uses dans un point de collection et recyclage le plus proche. Pour plus dinformations sur le recyclage des accumulateurs, tlphonez le numro gratuit 1-800-822-8837
(Etats-Units et Canada uniquement), ou visitez http://www.rbrc.org/. 11 4860_LegalSafety.fm Page 12 Thursday, June 25, 2009 4:39 PM Do not handle damaged or leaking lithium ion batteries. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturers instructions. The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 140F
(60C) or incinerate. Dispose of used battery promptly. Keep away from children. Do not short-circuit. Ne pas utiliser des batteries au lithium ionis qui sont endommages ou qui fuient. Une batterie non conforme prsente un danger d'explosion. La remplacer seulement par une batterie identique ou de type quivalent recommand par le fabricant. vacuer les batteries uses selon les directives du fabricant. La manutention incorrecte du module de batterie de cet appareil prsente un risque d'incendie ou de brlures chimiques. Ne pas dmonter, incinrer ou exposer une temprature de plus de 60C. vacuer promptement la batterie use. Garder hors de porte des enfants. vitez les courts-circuits. Specifications of the supplied battery pack Model number VGP-BPS19 Maximum charge current Maximum charge voltage 1.1 A 8.38 V Model number VGP-BPL19, VGP-BPX19 Maximum charge current Maximum charge voltage 2.2 A 8.38 V 12 4860_LegalSafety.fm Page 13 Thursday, June 25, 2009 4:39 PM 4860_LegalSafety.fm Page 14 Thursday, June 25, 2009 4:39 PM 4860_LegalSafety.fm Page 15 Thursday, June 25, 2009 4:39 PM 4860_LegalSafety.fm Page 16 Thursday, June 25, 2009 4:39 PM VAIO Support Homepage http://esupport.sony.com/EN/VAIO/ (for customers in USA) http://www.sony.ca/support/ (for customers in Canada) http://esupport.sony.com/LA/ (for customers in Spanish speaking Latin American countries or areas) http://esupport.sony.com/BR/ (for customers in Brazil) 2009 Sony Corporation / Printed in Japan 4-161-258-11(1)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-09-02 | 1851.25 ~ 1908.75 | PCB - PCS Licensed Transmitter | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
3 | 2422 ~ 2452 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2009-09-02
|
||||
1 2 3 | Applicant's complete, legal business name |
Sony Corporation
|
||||
1 2 3 | FCC Registration Number (FRN) |
0003739166
|
||||
1 2 3 | Physical Address |
1-7-1 Konan
|
||||
1 2 3 |
Tokyo, N/A 108-0075
|
|||||
1 2 3 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
j******@ict.cetecom.de
|
||||
1 2 3 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
1 2 3 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
AK8
|
||||
1 2 3 | Equipment Product Code |
PCG21111L
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
R****** T****
|
||||
1 2 3 | Title |
Senior Manager
|
||||
1 2 3 | Telephone Number |
81-50********
|
||||
1 2 3 | Fax Number |
81-50********
|
||||
1 2 3 |
c******@jp.sony.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/21/2009 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | PCB - PCS Licensed Transmitter | ||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Notebook PC | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power Output listed is ERP for Part 22 and EIRP for Part 24. This filing is applicable for BT, WLAN and CDMA operations as demonstrated in the filing. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. The SAR data in this filing are applicable to demonstrate compliance for the final product. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported body worn (lap-held) SAR values are: Part 15: 0.005 W/kg; Part 22: 0.025 W/kg; Part 24: 0.022 W/kg. | ||||
1 2 3 | Power Output listed is conducted. This filing is applicable for BT, WLAN and CDMA operations as demonstrated in the filing. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. The SAR data in this filing are applicable to demonstrate compliance for the final product. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported body worn (lap-held) SAR values are: Part 15: 0.005 W/kg; Part 22: 0.025 W/kg; Part 24: 0.022 W/kg. | |||||
1 2 3 | Power Output listed is Conducted. This filing is applicable for BT, WLAN and CDMA operations as demonstrated in the filing. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. The SAR data in this filing are applicable to demonstrate compliance for the final product. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported body worn (lap-held) SAR values are: Part 15: 0.005 W/kg; Part 22: 0.025 W/kg; Part 24: 0.022 W/kg. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
CETECOM Inc.
|
||||
1 2 3 | Name |
K****** L********
|
||||
1 2 3 | Telephone Number |
408-5********
|
||||
1 2 3 | Fax Number |
408-5********
|
||||
1 2 3 |
k******@cetecom.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | 824.7 | 848.31 | 0.263 | 2.5 ppm | 1M25F9W | ||||||||||||||||||||||||||||||||||
1 | 2 | 24E | 1851.25 | 1908.75 | 1.445 | 2.5 ppm | 1M25F9W | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0027300 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2412 | 2462 | 0.337 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC | 2422 | 2452 | 0.157 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC