|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2024-09-11
|
|
1 2 3 4
|
Applicant's complete, legal business name |
Sony Group Corporation
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0003739166
|
|
1 2 3 4
|
Physical Address |
1-7-1 Konan
|
|
1 2 3 4
|
Tokyo, N/A 108-0075
|
|
1 2 3 4
|
Japan
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
L******@ul.com
|
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
AK8
|
|
1 2 3 4
|
Equipment Product Code |
M23TFU1
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
K****** H******
|
|
1 2 3 4
|
Title |
Chief EMC/RF Compliance Specialist
|
|
1 2 3 4
|
Telephone Number |
81-50********
|
|
1 2 3 4
|
Fax Number |
81-50********
|
|
1 2 3 4
|
E-mail |
q******@sony.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4
|
Firm Name |
UL Japan, Inc.
|
|
1 2 3 4
|
Name |
T****** S******
|
|
1 2 3 4
|
Physical Address |
4383-326 Asama-cho, Ise-shi
|
|
1 2 3 4
|
Mie-ken, 516-0021
|
|
1 2 3 4
|
Japan
|
|
1 2 3 4
|
Telephone Number |
81-59********
|
|
1 2 3 4
|
Fax Number |
81-59********
|
|
1 2 3 4
|
E-mail |
T******@ul.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/11/2025 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 | DTS - Digital Transmission System |
| 1 2 3 4 | 6XD - 15E 6 GHz Low Power Indoor Client |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless communication module |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 3 4 | Modular Equipment Type | Limited Single Modular Approval |
| 1 2 3 4 | Purpose / Application is for | Original Equipment |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | Limited Modular Approval. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Output power listed is Conducted(Peak). Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the integration instructions provided. |
| 1 2 3 4 | Limited Modular Approval. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes for 5 GHz bands. This module can only be used with a host antenna circuit trace layout design in strict compliance with the integration instructions provided. |
| 1 2 3 4 | Limited Modular Approval. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Output power listed is Conducted(Peak). Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 1 MHz and 2 MHz bandwidth modes for Bluetooth Low energy. This module can only be used with a host antenna circuit trace layout design in strict compliance with the integration instructions provided. |
| 1 2 3 4 | Limited Modular Approval. This module is limited to use by the grantee in the grantee's products and is not intended for sale to third parties. Host systems must provide regulated supply voltages to the module. Output power listed is EIRP. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes for 6 GHz bands. This module can only be used with a host antenna circuit trace layout design in strict compliance with the integration instructions provided. |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
UL Japan, Inc.(Ise)
|
|
1 2 3 4
|
Name |
T******** S********
|
|
1 2 3 4
|
Telephone Number |
81-59********
|
|
1 2 3 4
|
Fax Number |
81-59********
|
|
1 2 3 4
|
E-mail |
T******@ul.com
|
|