Prepared by Johan Nerman (23017235) Contents responsible if other than preparer Approved by Company Internal Label content specification Document number 1277-2545 Date 2013-07-08 Remarks This document is managed in SPACE State: Preliminary 1(4) Revision 2 Type number: RD-0060 FCC ID: PY7-RD0060 IC : 4170B-RD0060 Label Content Specification Product Label
(For Type numbers, see contents below) General Information ........................................................................... 1 SCOPE .............................................................................................. 1 DOCUMENTATION ........................................................................... 1 LABEL INFORMATION ..................................................................... 1 PRINTING INFORMATION ............................................................... 1 LANGUAGE (optional) ....................................................................... 2 TESTS (optional) ............................................................................... 2 CONTENTS AND POSITIONING OF LABEL PRINTING .................. 2 CONTENTS....................................................................................... 2 POSITIONING OF LABEL PRINTING ............................................... 3 REVISION INFORMATION ............................................................... 4 Contents 1 1.1 1.2 1.3 1.4 1.5 1.6 2 2.1 2.2 3 SCOPE General Information 1 1.1 This document specifies the label printing for SBH52 (ROW: 1274-8295, JPN: 1274-
8302) 1.2 DOCUMENTATION 1.3 LABEL INFORMATION All documents are listed in the SPACE BOMs 1274-8295 and 1274-8302 Material and measurements are specified in document 1277-2544. 1.4 PRINTING INFORMATION Colour text:
Printing:
Text height:
Text font:
"Text gray color"
All printing shall be sharp, well readable and permanent Refer to Chapter 2.1
"Arial or equivalent"
1.5 LANGUAGE (optional) Company Internal Label content specification Document number 1277-2545 2(4) Revision 1 Only English text shall be printed on the label according to specification in section 2 below. 1.6 TESTS (optional) 2 2.1 CONTENTS The label shall be tested and approved according to valid safety requirements. CONTENTS AND POSITIONING OF LABEL PRINTING The label shall have the following content, Line and alignment may vary:
RTL type LINE Unibody LOGO TEXT SONY Line 1:
Model: SBH52 Line 2:
XXXX-XXXX.Y Line 3:
Type: RD-0060 Line 4:
FCC ID: PY7-RD0060 Line 5:
IC: 4170B-RD0060 Clip Icon Icon:
Icon Icon 0682 NOTE Note 1 Note 2 ALIGN Left, Height:1.8mm Left, Height:1.4mm Left, Height:1.4mm Left, Height:1.4mm Left, Height:1.4mm Left, Height:1.4mm Left, Height:1.4mm Left, Height: 5.0mm Right Hight5.7mm width:5.0 mm Japanese TA number and logo Symbol size: 3mm, Text: 1mm height Left, Circle 3.0mm, text height 0.96 Left Height : 0.8 mm Line 6:
Made in China Note 4 Company Internal Label content specification Document number 1277-2545 3(4) Revision 1 Icon Icon Line 5:
Line 4:
BDA: XXXXXXXXXXXX Serial No.:
YYWWSSPCXXXXXXC Note 1:
Note 2:
C-tick icon with N12878 number Australian EMC requirement Ref. doc Min size: 3mm New Zealand EMC-
requirement. Shall be put together with C-tick 1001-5788 Right, Height:3mm Right, Height:1.1mm Left, Height:1.0mm Left, Height:1.0 mm Note 3 Sony trademark according to: 190 89-EN/LZT 108 5347. XXXX-XXXX is the SPACE id. Y is the revision number (1,2,3 etc) 1274-8295 for ROW ,black 1274-8302 for Japan ,black Note 3:
Serial No according to 4/159 35-LXE 108 179 YYWWSSPCXXXXXXC YY = Year WW = Week of production SS = Supplier/site (07) P = Production Line/Product Code (A) XXXXXX = Serial value C = Checksum ( in two positions) Note 4:
Country of origin 2.2 POSITIONING OF LABEL PRINTING The logotype, text and safety approval symbols mentioned shall be placed according to the following schematic sketch (only layout, no measurements). Company Internal Label content specification Document number 1277-2545 4(4) Revision 1 3 REVISION INFORMATION Rev. 1.2013-07-08 Rev. 2.2013-07-18