SAR Information FCC Statement Declaration of Conformity
'
Sony 5503 UMTS HSPA Band 1 2 4 5 8 GSM GPRS/EDGE 850/900/1800/1900 LTE Band 1 2 3 4 5 7 8 20
Important Information United States & Canada THIS PHONE MODEL HAS BEEN CERTIFIED IN COMPLIANCE WITH THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. The 5503 Series mobile phones have been designed to comply with applicable safety requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed to not exceed the limits* of exposure to radio frequency (RF) energy set by governmental authorities. These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by international scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a safety margin designed to assure the safety of all individuals, regardless of age and health. The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate (SAR). Tests for SAR are conducted using standardized methods with the phone transmitting at its highest certified power level in all used frequency bands. While there may be differences between the SAR levels of various phone models, they are all designed to meet the relevant guidelines for exposure to radio waves. For more information on SAR, please refer to the Important Information chapter in the User Guide. The highest SAR value as reported to the authorities for this
:NJ
0.87 W/kg*
:NJ phone model when tested for use by the ear is . W/kg*, and when worn on the body is . W/kg*. For body-worn operation, the phone has been tested when positioned a minimum of 15 mm from the body without any metal parts in the vicinity of the phone or when properly used with an appropriate accessory and worn on the body. For devices which include WiFi hotspot functionality, SAR measurements for the device operating in WiFi hotspot mode were taken using a separation distance of 10 mm. Use of third-party 2 accessories may result in different SAR levels than those reported.
**Before a phone model is available for sale to the public in the US, it must be tested and certified by the Federal Communications Commission (FCC) that it does not exceed the limit established by the government-adopted requirement for safe exposure*. The tests are performed in positions and locations (i.e., by the ear and worn on the body) as required by the FCC for each model. The FCC has granted an Equipment Authorization for this phone model with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. While there may be differences between the SAR levels of various phones, all mobile phones granted an FCC equipment authorization meet the government requirement for safe exposure. SAR information on this phone model is on file at the FCC and can be found under the Display Grant section of http://transition.fcc.gov/oet/ea/fccid after searching on FCC
,' 3<30
ID PY7PM-0640. Additional information on SAR can be found on the Mobile Manufacturers Forum EMF website at http://www.emfexplained.info/.
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a margin of safety to give additional protection for the public and to account for any variations in measurements.
**This paragraph is only applicable to authorities and customers in the United States. 3 Renseignements importants tats-Unis et Canada CE MODLE DE TLPHONE A T CERTIFI CONFORME AUX EXIGENCES GOUVERNEMENTALES RELATIVES L'EXPOSITION AUX ONDES RADIOLECTRIQUES. Les tlphones mobiles de la 5503 ont t conus pour rpondre aux normes de scurit en vigueur en matire d'exposition aux ondes radiolectriques. Votre tlphone sans fil est un metteur et un rcepteur radio. Il est conu de manire ne pas dpasser les limites* d'exposition l'nergie des frquences radio (RF) tablies par les autorits gouvernementales. Ces limites fixent les niveaux maximaux d'nergie RF auxquels peut tre soumis le grand public. Ces lignes directrices sont bases sur des normes qui ont t labores par des organisations scientifiques internationales par le biais d'valuations priodiques et approfondies des tudes scientifiques. Ces normes prvoient une marge de scurit visant assurer la protection de tous les individus, peu importe leur ge et leur tat de sant. Les lignes directrices relatives l'exposition aux ondes radiolectriques utilisent une unit de mesure appele Taux d'absorption spcifique (TAS). Les tests de TAS sont effectus selon des mthodes standardises dans lesquelles le tlphone met dans toutes les bandes de frquences utilises, la plus forte puissance pour laquelle il a t homologu. Bien que le TAS puisse tre diffrent d'un modle de tlphone un autre, tous les appareils sont conus pour respecter les lignes directrices relatives aux ondes radiolectriques. Pour en savoir plus sur le DAS, reportez-vous au chapitre sur les renseignements importants du guide de l'utilisateur.
:NJ Le DAS le plus lev relev par les autorits pour ce modle de tlphone est de . W/kg* lorsqu'il est test en utilisation prs de l'oreille, et de . W/kg* lorsqu'il est port sur le corps. En mode dutilisation port sur le corps, le tlphone a t test lorsquil est au moins 15 mm du corps et lcart de toute pice en mtal, ou lorsquil est utilis de faon adquate
:NJ 4 avec un accessoire et port sur le corps. Pour les appareils munis de la fonctionnalit point d'accs WiFi , les mesures du DAS de l'appareil en mode WiFi ont t prises une distance de scurit de 10 mm. L'utilisation d'accessoires tiers peut produire des niveaux de DAS diffrents de ceux relevs.
**Avant qu'un modle de tlphone ne soit mis en vente auprs du public aux tats-Unis, la Commission fdrale des communications (CFC) doit le tester et certifier qu'il respecte les limites fixes dans les exigences gouvernementales d'exposition sans danger*. Pour chaque modle, les tests sont effectus en position et aux endroits d'usage (c.--d. prs de l'oreille et port sur le corps), tel que requis par la CFC. La CFC a accord une autorisation d'quipement pour ce modle de tlphone, aprs que tous les niveaux de TAS indiqus aient t valus et considrs conformes aux lignes directrices de la CFC en matire d'exposition aux radiofrquences. Mme s'il peut y avoir des diffrences entre les niveaux de TAS des diffrents tlphones, tous les tlphones mobiles auxquels la CFC a accord une autorisation d'quipement rpondent aux normes gouvernementales en matire d'exposition sans danger. La CFC conserve dans ses dossiers l'information relative aux TAS relevs pour ce modle de tlphone. Vous pouvez la consulter au http://transition.fcc.gov/oet/ea/fccid sous la rubrique Display Grant , aprs avoir effectu une recherche sur CFC
,' 3<30
ID PY7PM-0640. Vous trouverez des renseignements supplmentaires concernant le DAS sur le site Web du Mobile Manufacturers Forum MMF au http://www.emfexplained.info/.
* Aux tats-Unis et au Canada, la limite de TAS des tlphones mobiles utiliss par le public est de 1,6 watt/kg
(W/kg) en moyenne sur un gramme de tissus. Cette norme comporte une marge importante de scurit afin d'assurer une protection supplmentaire et de tenir compte de toute variation dans les mesures.
**Ce paragraphe ne concerne que les autorits et les clients des tats-Unis. 5 FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
&DXWLRQ
<RXUGHYLFHFDQRQO\FRQQHFWWRDQ)&&DSSURYHGDFFHVVSRLQWZKHQ
XVLQJ*+]:/$1IRULQGRRUDQGRXWGRRURSHUDWLRQ7KLVLVEHFDXVH
RSHUDWLRQLQWKH*+]WR*+]IUHTXHQF\EDQGLVRQO\
SHUPLWWHGIRULQGRRUXVH
17 Industry Canada Statement This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Please note that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avis dindustrie Canada Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et, and (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 18