FCC ID: PY7-02875J GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, GPS and NFC

FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines. Please use an accessory designated for this product or an accessory which contains no metal and which positions the handset a minimum of 15 mm from the body. For devices which include "WiFi hotspot" functionality, SAR measurements for the device operating in WiFi hotspot mode were taken using a separation distance of 10mm. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the Display Grant section of https://www.fcc.gov/oet/ea/ after searching on FCC ID PY7-02875J. Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at https://www.fcc.gov/general/radio-frequency-safety-0. FCC Statement for the USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. the equipment. Any change or modification not expressly approved by Sony may void the user's authority to operate This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Handset (Front) Part Description Front Camera Use to shoot still Earpiece/Speaker Hear the other party's images, videos of yourself, etc. voice here. Proximity/Light Detects surrounding Sensor brightness to automatically adjust Display or backlight and prevent Touchscreen misoperation during a call. notifications while Display is off. Lights while charging. display, operate with your fingers on Display. Notification Lamp Flashes for Display Touchscreen-type Part Description Second Mic Reduces noise for calling. Headphone Port Connect commercially available headphones. Internal Antenna Internal Antenna for Area calls and data communication. Flash/Photo Light Use as camera flash Camera Capture still images when taking photos, etc. and videos. Hold up to a reader/writer to use NFC / Osaifu-Keitai. NFC / Osaifu-

Keitai Detection Area Internal Internal Antennas for Antenna/GPS Antenna Area calls, data communication, and Wi-Fi/Bluetooth Antenna Area GPS. Internal Antenna for Wi-Fi, and Bluetooth features. SIM Card/SD Card Insert SIM Card/SD Card. USB Type-C Connect USB Type-C cable (commercially available), etc. Speak here. Slot Port Mic Handset (Back/Side) Handset Keys Part Description Volume/Zoom Adjust Volume. Up/Down Key Adjust Zoom while using Camera. Power Long Press for power Key/Screen Lock on/off. Key/Fingerprint Turn Display on/off. Sensor Or, use Fingerprint authentication. Inserting SIM Card SIM Card is an IC card containing phone number and other customer information. Always unmount SD Card beforehand. Pull SD Card Tray out from handset Pull SIM Card/SD Card Slot Cover out straight using fingernail in groove. Pull SIM Card Tray out from handset Pull SIM Card Tray out straight using fingernail in projecting part. Set SIM Card into SIM Card Tray with IC chip facing up Check SIM Card orientation by notch. Make sure SIM Card is in Tray securely. Holding handset held level, press SIM Card Tray in straight Check Tray orientation. Press firmly where circled , and make sure there is no gap between handset and SIM Card/SD Press SD Card Tray in straight SIM Card is inserted. Check Tray orientation. Card Slot Cover. Handling SIM Card For SIM Card handling, see following items. IC chip For SIM Card handling, see Ymobile Website. https://www.ymobile.jp/support/product/usim/

Always keep the IC chip clean. Wipe clean with a dry, soft cloth. Avoid applying labels. May damage SIM Card. SIM Card Cautions Observe the following when using SIM Card. Customer is responsible for any damage caused by inserting SIM Card in an other-

brand IC card reader, etc. Ymobile Corp. is not responsible in such case. SIM Card is the property of Ymobile Corp. SIM is replaceable (at cost) in case of loss/damage. Return SIM Card to Ymobile Corp. when cancelling subscription. Returned SIM Cards are recycled for environmental purposes. Note that SIM Card specifications and performance may change without notice. It is recommended that you keep a separate copy of information that is stored on SIM Card. Ymobile Corp. is not responsible for damages from stored information that is lost. Always follow emergency procedures to suspend service if your SIM Card or handset

(SIM Card inserted) is lost/stolen. For details, contact Customer Service. Powering On Long Press Power Key until handset vibrates once Lock Screen appears. Startup wizard appears for the first time handset is powered on. Follow onscreen instructions. Battery level is not sufficient if low battery indicator appears when Power Key is Pressed with handset powered off. Charge Internal Battery. FCC ID To view the regulatory compliance mark Find and tap Settings About Phone Certificates Regulatory compliance mark such as FCC ID is displayed on the screen. Supported frequency bands GSM/GPRS/EDGE : 850, 900, 1800, 1900MHz. UMTS : 2100 (Band I), 1700 (Band IV), 900 (Band VIII)MHz. LTE : Bands 1, 3, 4, 8, 12, 28, 38, 41. WLAN 2.4G/5G, NFC GSM 850/900 : 33dBm, DCS (1800)/PCS (1900) : 30dBm, UMTS : 24dBm, LTE : 23dBm, WLAN :

2.4GHz<100mW, 5.15-5.35GHz<200mW, 5.47-5.725GHz<200mW, 5.735-5.835GHz<25mW, NFC 13.56MHz

Sony Mobile Communications Prepared by:

Contents responsible if other than preparer:

Approved by:

Confidential General Document number:

000202682 Date:

12 Remarks:

1(1) Revision:

6 E-Label and Label Location PY7-02875J 1 E-Label Location Users can access the FCC ID information within 3 step as the followings. Setting from Main Menu Settings -> About Phone -> Certificates 2 Access to the required information on the e-label

(1) The user manual directs the user where to find the FCC ID E-Label. To view the regulatory compliance mark Find and tap [Settings]->[About Phone]->[Certificates]

Regulatory compliance mark such as FCC ID is displayed on the screen. Special codes or permissions are not required the above steps beyond the normal security protection to unlock the screen.

(2) Products must not require special accessories or supplemental plug-ins.

(3) The regulatory information is clearly legible without the aid of magnification.

(4) The regulatory information is secure. The user can not access and modify the regulatory information.

(5) The physical temporary label or the label on the packaging for purchasing and importation is attached in case of the device is sold in the United States. 3 FCC Statement FCC15.19(a) statement can be seen in the manual. It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.

Sony Mobile Communications, Inc. 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Remarks This document is managed in Infodoc. Date: February 20, 2020 SPORTON INTERNATIONAL, INC No. 52, Hwa Ya 1st Road Hwa Ya Technology Park Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan R.O.C FCC ID: PY7-02875J To Whom It May Concern:

Authorization Letter for Sporton I, the undersigned, hereby authorize Sporton to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Sporton on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Sporton as our representative, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

c) make claims regarding certification only in respect of the scope for which certification has been granted;

d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. Sony Mobile Communications, Inc. 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Remarks This document is managed in Infodoc. f) use certification only to indicate the products are certified as being in conformity with specified standards;

manner;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

i) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;

j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. Yours sincerely, ________________________________ Tomonori Nagano Head of Type Approval, Product Compliance Quality Assurance & Customer Services Sony Mobile Communications Inc. It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.

Remarks This document is managed in Infodoc. Sony Mobile Communications, Inc. 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Date: January 16, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To Whom It May Concern:

Power of Attorney for FCC applications Below individual is hereby authorized to sign applications, attestations and cover letters in regards of Sony Mobile Communications INC. applications, Grantee Code PY7. Tomonori Nagano Senior Manager Sony Mobile Communications Inc. Tel: +81367103241 Address: 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan E-mail: Tomonori.Nagano@sony.com Yours sincerely, ________________________________ Mika Kaneko Chief Regulatory Compliance Manager Sony Mobile Communications Inc. Tel: +81 3 6710 3225 Address: 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan E-mail: mika.kaneko@sony.com It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.

Sony Mobile Communications, Inc. 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Remarks This document is managed in Infodoc. Date: February 20, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern, Class II Permissive Change Request Letter FCC ID: PY7-02875J This is to request a Class II Permissive Change for FCC ID: PY7-02875J. The major changes filed under this application is:

The supported bands are handled by SW, please refer to the technical description for the detail. If you have any questions, please feel free to contact us. Yours sincerely ________________________________ Tomonori Nagano Head of Type Approval, Product Compliance Quality Assurance & Customer Services Sony Mobile Communications Inc. It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible

Sony Mobile Communications, Inc. 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Remarks This document is managed in Infodoc. Date: February 20, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC ID: PY7-02875J To Whom It May Concern:

Confidentiality Request Letter Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely.

- Block Diagram

- Theory of Operation

- Antenna Specification

- Tune up Information Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 180days from date of the Grant of Equipment Authorization.

- Test Setup Photos It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Yours sincerely, ________________________________ Tomonori Nagano Head of Type Approval, Product Compliance Quality Assurance & Customer Services Sony Mobile Communications Inc. It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.

Sony Mobile Communications, Inc. 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Remarks This document is managed in Infodoc. Date: February 20, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC ID: PY7-02875J To Whom It May Concern:

Confidentiality Request Letter Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 180days from date of the Grant of Equipment Authorization.

- External Photos

- User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Yours sincerely, ________________________________ Tomonori Nagano Head of Type Approval, Product Compliance Quality Assurance & Customer Services Sony Mobile Communications Inc. It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.

Sony Mobile Communications, Inc. 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Remarks This document is managed in Infodoc. Date: February 20, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Change in ID Request Letter-FCC ID: PY7-02875J To Whom It May Concern, Per 2.933 (b) We, Sony Mobile Communications Inc., request to apply for a new FCC ID as established in 47CFR 2.933(b) for currently approved device. 1. The original identification is FCC ID: PY7-45077R. 2. The original identification grant date is February 17, 2020. 3. The equipment is electrically identical with no change in design, circuitry and construction. 4. The original test results are applicable and representative. 5. External photos, label and label location are included in this application. If you have any questions, please feel free to contact us at the address shown below. Yours sincerely, ________________________________ Tomonori Nagano Head of Type Approval, Product Compliance Quality Assurance & Customer Services Sony Mobile Communications Inc. It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.