FCC ID: PY7-87607S GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac/ax, GPS, WPC and NFC

FCC Statement for the USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Radio Wave Exposure and Specific Absorption Rate (SAR) Information United States THIS PHONE MODEL HAS BEEN CERTIFIED IN COMPLIANCE WITH THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. The SOG01 Series mobile phones have been designed to comply with applicable safety requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed to not exceed the limits* of exposure to radio frequency (RF) energy set by governmental authorities. These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by international scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a safety margin designed to assure the safety of all individuals, regardless of age and health. The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate (SAR). Tests for SAR are conducted using standardized methods with the phone transmitting at its highest certified power level in all used frequency bands. While there may be differences between the SAR levels of various phone models, they are all designed to meet the relevant guidelines for exposure to radio waves. For more information on SAR, please refer to the important information chapter in the User Guide. The highest SAR value as reported to the authorities for this phone model when tested for use by the ear is 0.35 W/kg*, when worn on the body is 0.27 W/kg* and when WiFi hotspot mode is 0.58 W/kg. For body-worn operation, the phone has been tested when positioned a minimum of 15 mm from the body without any metal parts in the vicinity of the phone or when properly used with an appropriate accessory and worn on the body. For devices which include "WiFi hotspot"

functionality, SAR measurements for the device operating in WiFi hotspot mode were taken using a separation distance of 10 mm. Use of third-party accessories may result in different SAR levels than those reported.

** Before a phone model is available for sale to the public in the US, it must be tested and certified by the Federal Communications Commission (FCC) that it does not exceed the limit established by the government-adopted requirement for safe exposure*. The tests are performed in positions and locations (i.e., by the ear and worn on the body) as required by the FCC for each model. The FCC has granted an Equipment Authorization for this phone model with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. While there may be differences between the SAR levels of various phones, all mobile phones granted an FCC equipment authorization meet the government requirement for safe exposure. SAR information on this phone model is on file at the FCC and can be found under the Display Grant section of https://www.fcc. gov/oet/ea/fccid after searching on FCC ID PY7-87607S. Additional information on SAR can be found on the Mobile Manufacturers Forum EMF website at http://

www.emfexplained.info/.

* In the United States, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a margin of safety to give additional protection for the public and to account for any variations in measurements.

** This paragraph is only applicable to authorities and customers in the United States.

SOG01 SOG01 Basic Manual Basic Manual Online Manual (Japanese) Check "Online Manual" (Japanese) which describes detail explanations on various functions on the product from this procedure. In the Home screen, slide the screen up [

(Customer support)] [

(Online Manual)] (Japanese) Also, you can check "Online Manual" (Japanese) on the au homepage.

(https://www.au.com/online-manual/sog01/(Japanese)) 1 3 Checking the Online Manual Preface Preface Check "Online Manual" (Japanese) which describes detail explanations on various functions on the product from this procedure. Also, you can check "Online Manual" (Japanese) on the au homepage.

(https://www.au.com/online-manual/sog01/(Japanese)) 2 In the Home screen, slide the screen up

(Customer support)]

Thank you for buying "Xperia" (simply called "the Thank you for buying "Xperia" (simply called "the product" or "main unit" from here on). product" or "main unit" from here on). Before using the product, read "Basic Manual" (this Before using the product, read "Basic Manual" (this manual) and "Cautions on using the product" for manual) and "Cautions on using the product" for proper handling. proper handling. About Operating Instructions About Operating Instructions

"Basic Manual" (this manual)

"Basic Manual" (this manual) Handles only basic operations for main features. Handles only basic operations for main features.

"Online Manual" (Japanese)

"Online Manual" (Japanese) Check "Online Manual" (Japanese) which describes Check "Online Manual" (Japanese) which describes detail explanations on various functions on the detail explanations on various functions on the product from this procedure. For details on checking, product from this procedure. For details on checking, see "Checking the Online Manual" in this manual. see "Checking the Online Manual" in this manual.

" (Full Instruction Manual)"

" (Full Instruction Manual)"

(Japanese)

(Japanese) For detailed descriptions on various functions, you For detailed descriptions on various functions, you can refer to the " (Full Instruction can refer to the " (Full Instruction Manual)" (Japanese) available on the au homepage. Manual)" (Japanese) available on the au homepage.

(https://www.au.com/support/service/mobile/guide/

(https://www.au.com/support/service/mobile/guide/

manual/(Japanese)) manual/(Japanese)) For Those Requiring an English Instruction Manual For Those Requiring an English Instruction Manual Download URL:

Download URL:

(https://www.au.com/english/support/manual/)

(https://www.au.com/english/support/manual/) Regarding notations used in this Regarding notations used in this document document In this manual, operations of tapping menu items/

In this manual, operations of tapping menu items/

icons/buttons on the screen, etc. are indicated as icons/buttons on the screen, etc. are indicated as

[(name of the item, etc.)].

[(name of the item, etc.)]. In this manual, screens and operations for the In this manual, screens and operations for the product with au Nano IC Card 04 attached are product with au Nano IC Card 04 attached are described. described. Screen illustrations shown in this manual may look Screen illustrations shown in this manual may look different from the actual screens. In some cases, different from the actual screens. In some cases, minor details or a part of a screen may be omitted. minor details or a part of a screen may be omitted. In this manual, "Basic Manual" (this manual), In this manual, "Basic Manual" (this manual),

"Cautions on using the product" and "

"Cautions on using the product" and "

(Full instruction manual)" (Japanese) are

(Full instruction manual)" (Japanese) are collectively referred to as "Instruction Manual". collectively referred to as "Instruction Manual". In this manual, explanations for the wallpaper In this manual, explanations for the wallpaper

"Black" are provided.

"Black" are provided. In this manual, operations in portrait view are In this manual, operations in portrait view are described as a standard. In horizontal view, menu described as a standard. In horizontal view, menu items, icons, buttons on the screen, etc. may differ. items, icons, buttons on the screen, etc. may differ. In this manual, "au Nano IC Card 04" is abbreviated In this manual, "au Nano IC Card 04" is abbreviated as "au IC card (SIM card)". as "au IC card (SIM card)". In this manual, "microSD memory card In this manual, "microSD memory card

(commercially available)", "microSDHC memory

(commercially available)", "microSDHC memory card (commercially available)" and "microSDXC card (commercially available)" and "microSDXC memory card (commercially available)" are memory card (commercially available)" are abbreviated as "microSD memory card". abbreviated as "microSD memory card". All of the indicated amounts exclude tax unless All of the indicated amounts exclude tax unless otherwise specified. otherwise specified. Company names and product names referred to in Company names and product names referred to in this manual are trademarks or registered this manual are trademarks or registered trademarks of respective companies. The TM and trademarks of respective companies. The TM and marks may be omitted in this manual. marks may be omitted in this manual.

"The Company" as appears in the manual refers to

"The Company" as appears in the manual refers to these companies:

these companies:

Sold by: KDDI CORPORATION, OKINAWA Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY CELLULAR TELEPHONE COMPANY Manufactured by: Sony Mobile Communications Inc. Manufactured by: Sony Mobile Communications Inc. quality of call/communication. memory card/au IC card (SIM card) slot cover. memory card/au IC card (SIM card) slot cover. 3 4 5 6 Packaged items Packaged items Packaged items Before your start using the product, make sure that Before your start using the product, make sure that Before your start using the product, make sure that you have all these packaged items with the product. you have all these packaged items with the product. you have all these packaged items with the product. Xperia Xperia Xperia USB Type-C-3.5 USB Type-C-3.5 USB Type-C-3.5 conversion/TV Antenna cable conversion/TV Antenna cable conversion/TV Antenna cable 01 (03SOHSA) 01 (03SOHSA) 01 (03SOHSA) Getting Ready Names and functions of parts Headset connection

(Basic Manual)

(Basic Manual)

(Basic Manual)

(Japanese)

(Japanese)

(Japanese)

(Cautions on using the

(Cautions on using the

(Cautions on using the product)(Japanese) product)(Japanese) product)(Japanese) These items are not included in the package. These items are not included in the package. These items are not included in the package. microSD memory card microSD memory card microSD memory card AC adapter AC adapter AC adapter Earphones Earphones Earphones USB Type-C cable USB Type-C cable USB Type-C cable Information Information Information Purchase a specified charger (sold separately). Purchase a specified charger (sold separately). Purchase a specified charger (sold separately). The battery is built into the product. The battery is built into the product. The battery is built into the product. Illustrations used in this manual are just images for Illustrations used in this manual are just images for Illustrations used in this manual are just images for explanations. They may be different from actual ones. explanations. They may be different from actual ones. explanations. They may be different from actual ones. Attaching/Removing a microSD Attaching/Removing a microSD memory card memory card Before attaching/removing microSD memory card, Before attaching/removing microSD memory card, make sure to turn off the product. make sure to turn off the product. Attaching a microSD memory card Attaching a microSD memory card 1 Remove the tray from the main unit 1 Remove the tray from the main unit Put your fingertip (nail) into the groove of the Put your fingertip (nail) into the groove of the microSD memory card/au IC card (SIM card) slot microSD memory card/au IC card (SIM card) slot and draw the cover straight out. and draw the cover straight out. 2 Set a microSD memory card into the tray with the 2 Set a microSD memory card into the tray with the terminal side facing up terminal side facing up Surely set a microSD memory card into the tray Surely set a microSD memory card into the tray not to come off. not to come off. terminal Second microphone*1:

Reduces noise so that the other party can easily hear your voice. microSD memory card/au IC card (SIM card) slot Front camera Earpiece/Speaker Proximity/Light sensor:

Switches the touch panel on and off to prevent from erroneous operation during a call/

Auto-control for display brightness. Notification LED (

P. 8) Display (Touch panel) Speaker Mouthpiece/

Microphone*1 USB Type-C connection terminal 3 Keep the product horizontal and then push the 3 Keep the product horizontal and then push the tray in straight tray in straight Pay attention to the direction the tray is being Pay attention to the direction the tray is being pushed in. pushed in. Firmly press where circled , and check that there Firmly press where circled , and check that there is no gap between the main unit and the microSD is no gap between the main unit and the microSD memory card/au IC card (SIM card) slot cover. memory card/au IC card (SIM card) slot cover. Removing a microSD memory card Removing a microSD memory card 1 Remove the tray from the main unit 1 Remove the tray from the main unit Put your fingertip (nail) into the groove of the Put your fingertip (nail) into the groove of the microSD memory card/au IC card (SIM card) slot microSD memory card/au IC card (SIM card) slot and draw the cover straight out. and draw the cover straight out. 2 Remove the microSD memory card from the tray 2 Remove the microSD memory card from the tray Removing au IC card (SIM card) Removing au IC card (SIM card) 1 Remove the tray from the main unit 1 Remove the tray from the main unit Put your fingertip (nail) into the groove of the Put your fingertip (nail) into the groove of the microSD memory card/au IC card (SIM card) slot microSD memory card/au IC card (SIM card) slot and draw the cover straight out. and draw the cover straight out. 2 Remove the au IC card (SIM card) from the tray 2 Remove the au IC card (SIM card) from the tray 3 Keep the product horizontal and then push the 3 Keep the product horizontal and then push the tray in straight tray in straight Pay attention to the direction the tray is being Pay attention to the direction the tray is being pushed in. pushed in. Firmly press where circled , and check that there Firmly press where circled , and check that there is no gap between the main unit and the microSD is no gap between the main unit and the microSD memory card/au IC card (SIM card) slot cover memory card/au IC card (SIM card) slot cover

(P. 10).

(P. 10). 10 11 12 13 Initial settings Initial settings STEP2: Setting up the network STEP2: Setting up the network connection connection Connecting headphones or earphones Connecting headphones or earphones To hear sound from commercially available To hear sound from commercially available headphones or earphones, connect the supplied USB headphones or earphones, connect the supplied USB Type-C-3.5 conversion/TV Antenna cable 01. Type-C-3.5 conversion/TV Antenna cable 01. 1 Insert the plug on the commercially available 1 Insert the plug on the commercially available headphones or earphones in the headset socket headphones or earphones in the headset socket on the USB Type-C-3.5 conversion/TV on the USB Type-C-3.5 conversion/TV Antenna cable 01 Antenna cable 01 2 Insert the USB Type-C plug of USB Type-C-3.5 2 Insert the USB Type-C plug of USB Type-C-3.5 conversion/TV Antenna cable 01 to the USB conversion/TV Antenna cable 01 to the USB Type-C connection terminal of the product Type-C connection terminal of the product When " (Welcome)" appears after the product When " (Welcome)" appears after the product is powered on, follow the onscreen instructions to is powered on, follow the onscreen instructions to set functions and services. set functions and services. 1 1 STEP1: Start of setting STEP1: Start of setting 1 1 2 2 Select a network Select a network connection method connection method When you select "Use mobile network for setup", When you select "Use mobile network for setup", tap "CONTINUE" to proceed to "STEP 4". tap "CONTINUE" to proceed to "STEP 4".

[GET STARTED]

[GET STARTED]

Confirm contents*1 Confirm contents*1 Mark items you agree to Mark items you agree to

[ACCEPT]

[ACCEPT]

To change the language, tap " (Japanese)" to To change the language, tap " (Japanese)" to open the language list, select "English" "United open the language list, select "English" "United States". States".

*1 Tap "Data charges", "Detailed Diagnostics", and

*1 Tap "Data charges", "Detailed Diagnostics", and

"Privacy Policy" to confirm the contents.

"Privacy Policy" to confirm the contents. 7 7 8 8 1 1 1 2 2 2 of using fingerprint of using fingerprint Set whether to use the fingerprint authentication Set whether to use the fingerprint authentication function. Before registering a fingerprint, set the function. Before registering a fingerprint, set the screen lock unlock method. screen lock unlock method. 1 1 2 2 In this manual, the contents on Android 9 are provided. For the latest edition, refer to " (Basic Manual)" (Japanese) available on the au homepage.

(https://www.au.com/support/service/mobile/guide/manual/

(Japanese))

[ (Online Manual)] (Japanese) Flash/Photo light Flash/Photo light RGBC-IR sensor:

RGBC-IR sensor:

Detects element of Detects element of lighting source of lighting source of shooting environment shooting environment to adjust white balance to adjust white balance automatically when automatically when shooting. shooting. Wi-Fi antenna*2 Wi-Fi antenna*2 Built-in antenna/Wi-Fi Built-in antenna/Wi-Fi antenna*2 antenna*2 Built-in antenna*2 Built-in antenna*2 Camera lens Camera lens au IC card (SIM card) au IC card (SIM card) Wi-Fi/GPS/Bluetooth Wi-Fi/GPS/Bluetooth antenna*2 antenna*2 Laser AF sensor:

Laser AF sensor:

Detects distance from an object when shooting to Detects distance from an object when shooting to focus the camera on automatically. focus the camera on automatically. mark mark Wireless charging touch point Wireless charging touch point Back cover*3 Back cover*3 Volume key/Zoom key Volume key/Zoom key Power key/Screen lock key/Fingerprint sensor Power key/Screen lock key/Fingerprint sensor Camera key Camera key

*1 Do not jab with a sharp object such as a needle.

*1 Do not jab with a sharp object such as a needle. Doing so may cause a malfunction. Doing so may cause a malfunction.

*2 The antenna is built into the main unit. Covering

*2 The antenna is built into the main unit. Covering around the antenna by your hand may affect the around the antenna by your hand may affect the 7

*3 The back cover is not removable. Removing forcibly might cause damage or a malfunction. Also, battery is built into the main unit and not removable by customers. FCC ID To view the regulatory compliance mark Find and tap [Settings] [About phone]

[Certificates]

Regulatory compliance mark such as FCC ID is displayed on the screen. au IC card (SIM card) Your phone number etc. is recorded in au IC card (SIM card). The product is compatible with au Nano IC Card 04. LED LED Status Status Red Red Orange Orange Green Green Flashing Flashing red red Flashing Flashing white*1 white*1 Description Description The battery is charging when the The battery is charging when the remaining battery level is 14% or lower. remaining battery level is 14% or lower. The battery is charging when the The battery is charging when the remaining battery level is 15% - 89%. remaining battery level is 15% - 89%. The battery is charging when the The battery is charging when the remaining battery level is 90% or remaining battery level is 90% or higher. higher. The remaining battery level is 14% or The remaining battery level is 14% or lower. lower. Indicates a missed call, new au-mail, Indicates a missed call, new au-mail, new message, etc. new message, etc. au Nano IC Card 04 IC (metal) part

*1 Flashes in sleep mode.

*1 Flashes in sleep mode. Attaching/removing au IC card (SIM Attaching/removing au IC card (SIM card) card) Front Back Before attaching/removing au IC card (SIM card), Before attaching/removing au IC card (SIM card), make sure to turn off the product. make sure to turn off the product. Notification LED The Notification LED prompts charging, or informs battery level while charging, missed calls, new mails, etc. by turning on or flashing. Attaching au IC card (SIM card) Attaching au IC card (SIM card) 1 Remove the tray from the main unit 1 Remove the tray from the main unit Put your fingertip (nail) into the groove of the Put your fingertip (nail) into the groove of the microSD memory card/au IC card (SIM card) slot microSD memory card/au IC card (SIM card) slot and draw the cover straight out. and draw the cover straight out. 1 8 2 9 3 Keep the product horizontal and then push the 3 Keep the product horizontal and then push the tray in straight tray in straight Pay attention to the direction the tray is being Pay attention to the direction the tray is being pushed in. pushed in. Firmly press where circled , and check that there is Firmly press where circled , and check that there is no gap between the main unit and the microSD memory no gap between the main unit and the microSD memory card/au IC card (SIM card) slot cover (P. 13). card/au IC card (SIM card) slot cover (P. 13). 2 Insert the USB Type-C plug of TypeC Common AC 2 Insert the USB Type-C plug of TypeC Common AC 2 Insert the USB Type-C plug of TypeC Common AC Adapter 02 (sold separately) into the USB Type-C Adapter 02 (sold separately) into the USB Type-C Adapter 02 (sold separately) into the USB Type-C connection terminal of the product straight connection terminal of the product straight connection terminal of the product straight When charging is started with the product When charging is started with the product When charging is started with the product powered on, the start sound for charging sounds powered on, the start sound for charging sounds powered on, the start sound for charging sounds and the Notification LED of the product lights. and the Notification LED of the product lights. and the Notification LED of the product lights. Charging Charging When you purchase your product, the internal battery When you purchase your product, the internal battery is not fully charged. Charge the battery before use. is not fully charged. Charge the battery before use. Information Information When charging starts, the Notification LED of the When charging starts, the Notification LED of the product lights according to the battery level. To product lights according to the battery level. To check the battery level, see the status bar in the check the battery level, see the status bar in the top of the screen, or in the Home screen, slide the top of the screen, or in the Home screen, slide the screen up [Settings] [Battery]. screen up [Settings] [Battery]. If you start charging with the product turned off, a If you start charging with the product turned off, a screen launches indicating the charging status but screen launches indicating the charging status but operations are not available. Thus, do not charge operations are not available. Thus, do not charge the product in a place where the use is prohibited. the product in a place where the use is prohibited. The charging time may take longer when charging The charging time may take longer when charging with a PC or while using the camera function. with a PC or while using the camera function. Charging with the AC Adapter Charging with the AC Adapter Charging with connecting TypeC Common AC Charging with connecting TypeC Common AC Adapter 02 (sold separately) is explained. Adapter 02 (sold separately) is explained. 1 Insert the power plug of TypeC Common AC 1 Insert the power plug of TypeC Common AC Adapter 02 (sold separately) into an outlet Adapter 02 (sold separately) into an outlet connection connection 1 1 You can use a home wireless LAN (Wi-Fi) or public You can use a home wireless LAN (Wi-Fi) or public wireless LAN to access the Internet services. Set it wireless LAN to access the Internet services. Set it in a place where the signal of Wi-Fi network can be in a place where the signal of Wi-Fi network can be received. received. 1 1 2 2 3 When charging is complete, remove the USB 3 When charging is complete, remove the USB 3 When charging is complete, remove the USB Type-C plug of TypeC Common AC Adapter 02 Type-C plug of TypeC Common AC Adapter 02 Type-C plug of TypeC Common AC Adapter 02

(sold separately) from the product

(sold separately) from the product

(sold separately) from the product 4 Remove the power plug of TypeC Common AC 4 Remove the power plug of TypeC Common AC 4 Remove the power plug of TypeC Common AC Adapter 02 (sold separately) from the outlet Adapter 02 (sold separately) from the outlet Adapter 02 (sold separately) from the outlet Turning the power on/off Turning the power on/off Turning the power on Turning the power on 1 Press and hold Power key until the product 1 Press and hold Power key until the product vibrates once vibrates once The lock screen appears. The lock screen appears. When " (Welcome)" appears after the When " (Welcome)" appears after the product is powered on, follow the onscreen product is powered on, follow the onscreen instructions to set the initial settings. instructions to set the initial settings. For details on the initial settings, see "Initial For details on the initial settings, see "Initial settings" in this manual. settings" in this manual. 2 Swipe (flick) the screen up 2 Swipe (flick) the screen up The Home screen appears. The Home screen appears. Turning the power off Turning the power off 1 Press and hold Power key (over one sec.) 1 Press and hold Power key (over one sec.) 2 [Power off]

2 [Power off]

Information Information To restart the product in safe mode (start with To restart the product in safe mode (start with almost default state), press and hold Power key almost default state), press and hold Power key

(over one sec.) Long-touch "Power off" [OK].

(over one sec.) Long-touch "Power off" [OK]. Forcedly turning the power off Forcedly turning the power off 1 Press and hold Power key and the upper part of 1 Press and hold Power key and the upper part of the volume key at the same time for the volume key at the same time for approximately nine seconds, and release your approximately nine seconds, and release your fingers after the product vibrates three times fingers after the product vibrates three times consecutively consecutively Set up a Google account to synchronize with Gmail, Set up a Google account to synchronize with Gmail, Set up a Google account to synchronize with Gmail, contacts of online service, calendar, etc. Setting for contacts of online service, calendar, etc. Setting for contacts of online service, calendar, etc. Setting for creating a new Google account is explained here. creating a new Google account is explained here. creating a new Google account is explained here. If you set up a Google account, you can use Google If you set up a Google account, you can use Google If you set up a Google account, you can use Google apps such as "Gmail" or "Google Play". apps such as "Gmail" or "Google Play". apps such as "Gmail" or "Google Play". Although you can use the product without setting Although you can use the product without setting Although you can use the product without setting of a Google account, some apps using it cannot be of a Google account, some apps using it cannot be of a Google account, some apps using it cannot be used. When you activate the app, the setup screen used. When you activate the app, the setup screen used. When you activate the app, the setup screen for a Google account appears. for a Google account appears. for a Google account appears. 1 1 1 2 2 2 2 Set au IC card (SIM card) into the tray with the IC 2 Set au IC card (SIM card) into the tray with the IC 2 Set au IC card (SIM card) into the tray with the IC

(metal) part facing up

(metal) part facing up

(metal) part facing up Pay attention to the location of the notch. Pay attention to the location of the notch. Pay attention to the location of the notch. Surely set au IC card (SIM card) into the tray not Surely set au IC card (SIM card) into the tray not Surely set au IC card (SIM card) into the tray not to come off. to come off. to come off. 3 Keep the product horizontal and then push the 3 Keep the product horizontal and then push the 3 Keep the product horizontal and then push the tray in straight tray in straight tray in straight Pay attention to the direction the tray is being Pay attention to the direction the tray is being Pay attention to the direction the tray is being pushed in. pushed in. pushed in. Firmly press where circled , and check that there Firmly press where circled , and check that there Firmly press where circled , and check that there is no gap between the main unit and the microSD is no gap between the main unit and the microSD is no gap between the main unit and the microSD Locking the screen/Unlocking Locking the screen/Unlocking screen lock screen lock Locking the screen Locking the screen Turn off the screen to set sleep mode to prevent the Turn off the screen to set sleep mode to prevent the touch panel or key from operating mistakenly or lock touch panel or key from operating mistakenly or lock the screen. the screen. 1 While the screen is displayed, press Power key 1 While the screen is displayed, press Power key Unlocking screen lock Unlocking screen lock The lock screen appears when turning the power on The lock screen appears when turning the power on or sleep mode is canceled by pressing Power key. or sleep mode is canceled by pressing Power key. While Ambient display (which allows you to check While Ambient display (which allows you to check date & time or notifications in sleep mode) is date & time or notifications in sleep mode) is activated, double-tap the screen or press Power activated, double-tap the screen or press Power key to display the lock screen. key to display the lock screen. 1 On the lock screen, swipe (flick) the screen up 1 On the lock screen, swipe (flick) the screen up Information Information In the lock screen, swipe (flick) "

In the lock screen, swipe (flick) "

" or "

" or "

" to use

" to use Google Assistant or Camera. Google Assistant or Camera. 3 3 5 5 4 4 6 6 Enter your birthday Enter your birthday Select your gender Select your gender

[Next]

[Next]

[Create your own Gmail

[Create your own Gmail address]*2 Enter your address]*2 Enter your Gmail address [Next]

Gmail address [Next]

STEP3: Setting wireless LAN (Wi-Fi) STEP3: Setting wireless LAN (Wi-Fi) STEP4: Copy apps & data STEP4: Copy apps & data STEP5: Setting up a Google account STEP5: Setting up a Google account STEP5: Setting up a Google account STEP6: Setting Google services STEP6: Setting Google services STEP6: Setting Google services STEP7: Setting the unlock method STEP7: Setting the unlock method 14 15 16 17 18 19 20

[DON'T COPY]

[DON'T COPY]

To use the data of the other Android phone etc. To use the data of the other Android phone etc. successively, tap "NEXT" and follow the onscreen successively, tap "NEXT" and follow the onscreen instruction. instruction. Select a Wi-Fi network Select a Wi-Fi network Enter a password Enter a password

(security key)

(security key)

[CONNECT]

[CONNECT]

21 22 23 24 25 26

[Create account]

[Create account]

[Create account]

[For myself]*1

[For myself]*1

[For myself]*1 Enter "First name", Enter "First name", Enter "First name",

"Last name" [Next]

"Last name" [Next]

"Last name" [Next]

Enter a password Enter a password

[Yes, I'm in]

[Yes, I'm in]

[Next]

[Next]

[Next]

[Next]

Confirm the Privacy Confirm the Privacy Policy, Terms of Service, Policy, Terms of Service, etc. [I agree]

etc. [I agree]

Confirm/change each Confirm/change each Confirm/change each setting [MORE]

setting [MORE]

setting [MORE]

Confirm/change each Confirm/change each Confirm/change each setting [ACCEPT]

setting [ACCEPT]

setting [ACCEPT]

*1 If you have your Google account, enter the Gmail

*1 If you have your Google account, enter the Gmail address or the phone number and tap "Next", and address or the phone number and tap "Next", and follow the onscreen instructions. follow the onscreen instructions.

*2 You can also select a Gmail address you have

*2 You can also select a Gmail address you have prepared. prepared.

[NEXT]*1

[NEXT]*1 Follow the onscreen Follow the onscreen instructions*2 instructions*2

*1 To not register your fingerprint, tap "SKIP". To not

*1 To not register your fingerprint, tap "SKIP". To not set screen lock, continue by tapping "SKIP". set screen lock, continue by tapping "SKIP".

*2 To change screen lock unlock method, tap "Screen

*2 To change screen lock unlock method, tap "Screen lock options". lock options". Next page 27 7 7 9 9 3 3 STEP8: Setting up Google Assistant STEP8: Setting up Google Assistant STEP9: Setting up additional apps STEP9: Setting up additional apps STEP9: Setting up additional apps STEP10: Setting up more things STEP10: Setting up more things STEP10: Setting up more things 1 1 2 2 1 1 1 2 2 2 1 1 1 2 2 2

[MORE] [TURN ON]*1

[MORE] [TURN ON]*1

[NEXT] [I AGREE]

[NEXT] [I AGREE]

Unmark apps not to add*1 Unmark apps not to add*1 Unmark apps not to add*1

[OK]

[OK]

[OK]

[NO THANKS]*1

[NO THANKS]*1

[NO THANKS]*1

[FINISH]

[FINISH]

[FINISH]

*1 Tap an item to open an app introduction.

*1 Tap an item to open an app introduction.

*1 Tap an item to open an app introduction.

*1 To make other settings, tap items you want to set,

*1 To make other settings, tap items you want to set,

*1 To make other settings, tap items you want to set, Enter PIN number*2 Enter PIN number*2 Enter a password Enter a password

[ (Next)]

[ (Next)]

[ (Agree, and

[ (Agree, and next)]

next)]

[ALLOW]*3

[ALLOW]*3 Mark apps to install*4 Mark apps to install*4

[Next]

[Next]

au initial settings au initial settings au initial settings Update preinstalled apps, setting au ID, download Update preinstalled apps, setting au ID, download Update preinstalled apps, setting au ID, download previously used apps, or make settings for using the previously used apps, or make settings for using the previously used apps, or make settings for using the product more convenient. product more convenient. product more convenient. By setting au ID, you can use various services By setting au ID, you can use various services By setting au ID, you can use various services provided by au such as au (au Smart provided by au such as au (au Smart provided by au such as au (au Smart Pass) or "au Kantan Kessai (Easy Payment)", which Pass) or "au Kantan Kessai (Easy Payment)", which Pass) or "au Kantan Kessai (Easy Payment)", which allows you to do things such as purchase apps allows you to do things such as purchase apps allows you to do things such as purchase apps from Google Play. from Google Play. from Google Play. Alternatively, after the initial setting, in the Home Alternatively, after the initial setting, in the Home Alternatively, after the initial setting, in the Home screen, slide the screen up [Settings] [au screen, slide the screen up [Settings] [au screen, slide the screen up [Settings] [au Settings Menu] [au Initial Setting]. Settings Menu] [au Initial Setting]. Settings Menu] [au Initial Setting]. 1 1 1 2 2 2 3 3 5 5 4 4 6 6

*1 If you have already been registered au ID, step 3 and 4 do not appear. Proceed to step 5.

*2 PIN number is a four digit number chosen by the customer and noted on the application form.

*3 The conformation screen for app permission appears several times. Operate in the same way.

*4 When "Select apps" appears in "Backed up", tap it to check the apps.

*5 If there is any data backed up by "Data Storage App", you can restore them. Tap "Restore from backup now" and follow the onscreen instructions. 8 8 10 10 and follow the onscreen instructions. and follow the onscreen instructions. and follow the onscreen instructions. The screen for setting more things does not appear The screen for setting more things does not appear The screen for setting more things does not appear if you do not set the fingerprint authentication or if you do not set the fingerprint authentication or if you do not set the fingerprint authentication or screen lock unlock method. screen lock unlock method. screen lock unlock method. Tap "FINISH" to complete initial settings. Tap "FINISH" to complete initial settings. Tap "FINISH" to complete initial settings. Downloading of the applications selected in "STEP Downloading of the applications selected in "STEP Downloading of the applications selected in "STEP 9" starts when the product is connected to Wi-Fi. 9" starts when the product is connected to Wi-Fi. 9" starts when the product is connected to Wi-Fi. information]

information]

Checking the operations of au-mail Checking the operations of au-mail app app 1 1 2 2 28 29 32 33 34 Mark/unmark "Update"

Mark/unmark "Update"

Mark/unmark "Update"

[Sign in]*1

[Sign in]*1

[Sign in]*1 30

[GET STARTED]

[GET STARTED]

[GET STARTED]

31

[ (Next)]

[ (Next)]

[OK]

[OK]

Mark items to set [Next]

Mark items to set [Next]

[Finish]*5

[Finish]*5 Making the initial settings Making the initial settings Checking your au-mail address Checking your au-mail address Changing your au-mail address Changing your au-mail address 1 From the Home screen, [

1 From the Home screen, [

] [E-mail

] [E-mail 1 From the Home screen, [

1 From the Home screen, [

] [Change

] [Change From the Home screen, From the Home screen, Confirm the content Confirm the content

[Agree]

[Agree]

Confirm the content Confirm the content

[Agree] Follow the

[Agree] Follow the onscreen instruction onscreen instruction Checking au-mail Checking au-mail address*1 [

address*1 [

(Close)]

(Close)]

*1 For change of model, the au-mail address which you

*1 For change of model, the au-mail address which you have been used so far is displayed. have been used so far is displayed. From the Home screen, From the Home screen,

[Operation guide]

[Operation guide]

(Japanese)

(Japanese) Address/Setting Filter] [OK]

Address/Setting Filter] [OK]

2 [ (To change Mail address)]

2 [ (To change Mail address)]

Enter the security code*1 [ (Send)]

Enter the security code*1 [ (Send)]

[OK]

[OK]

3 Confirm the content [ (I agree)] Mark 3 Confirm the content [ (I agree)] Mark

" (Change to your

" (Change to your desired mail address)" and enter a mail address of desired mail address)" and enter a mail address of your choice [ (Send)] [OK]

your choice [ (Send)] [OK]

*1 PIN number is a four digit number chosen by the

*1 PIN number is a four digit number chosen by the customer and noted on the application form. customer and noted on the application form. When the confirmation screen appears, follow the When the confirmation screen appears, follow the onscreen instructions. onscreen instructions. The operations or the screen displays are subject The operations or the screen displays are subject to change without notice. to change without notice. Transferring data from au Settings Menu Transferring data from au Settings Menu Import or export data between the product and your Import or export data between the product and your previous au mobile phone by using microSD memory previous au mobile phone by using microSD memory card or via the au server. card or via the au server. To import data via the au server, save data to the To import data via the au server, save data to the au server from your previous au mobile phone in au server from your previous au mobile phone in advance. To use the au server, set au ID (If there is advance. To use the au server, set au ID (If there is no au Settings Menu on your previous au mobile no au Settings Menu on your previous au mobile phone, use "au Cloud" app). phone, use "au Cloud" app). To import data by using a microSD memory card, To import data by using a microSD memory card, save the data to a microSD memory card from your save the data to a microSD memory card from your previous au mobile phone in advance (If there is no previous au mobile phone in advance (If there is no au Settings Menu on your previous au mobile au Settings Menu on your previous au mobile phone, use "au backup" app). phone, use "au backup" app). 2 2 1 1 Phone 4 4 Making a call Direct input calling 1 From the Home screen, [

2 Enter a phone number [

To make a call to a land-line phone, enter from the city code even when you stay in the same city. 3 Call [

To adjust the in-coming volume (volume of the other party's voice), press the upper part or lower part of the volume key while calling. Calling from history 1 From the Home screen, [

2 [

] of call history

] Tap "

" tab Calling from contacts 1 In the Home screen, slide the screen up

[Contacts]

2 Tap a contact to call 3 Tap [Call]/phone number

[Data Transfer]

[Data Transfer]

* When the confirmation

* When the confirmation screen appears, follow screen appears, follow the onscreen the onscreen instructions. instructions.

[ (For

[ (For change of model, tap change of model, tap here)] Follow the here)] Follow the onscreen instructions onscreen instructions To back up photos and contacts to the au server To back up photos and contacts to the au server automatically using "Data storage App", use this automatically using "Data storage App", use this procedure. procedure. In the Home screen, slide the screen up In the Home screen, slide the screen up

[Settings] [au Settings Menu] [Backup

[Settings] [au Settings Menu] [Backup Setting] Mark items to back up automatically Setting] Mark items to back up automatically 35 36 37 38 39 40 41 Setting wireless LAN (Wi-Fi) Setting wireless LAN (Wi-Fi) Setting the lighting time of screen Setting the lighting time of screen Setting the lighting time of screen Appendix Appendix Main specifications Main specifications Main specifications Charging time Charging time Charging time You can use a home wireless LAN (Wi-Fi) or public You can use a home wireless LAN (Wi-Fi) or public wireless LAN to access the Internet services. Set it wireless LAN to access the Internet services. Set it in a place where the signal of Wi-Fi network can be in a place where the signal of Wi-Fi network can be received. received. The screen turns off automatically when the set time The screen turns off automatically when the set time The screen turns off automatically when the set time has elapsed while no operation is made. When you has elapsed while no operation is made. When you has elapsed while no operation is made. When you cannot operate readily because the screen turns off cannot operate readily because the screen turns off cannot operate readily because the screen turns off soon, change the lighting time. soon, change the lighting time. soon, change the lighting time. In the Home screen, In the Home screen, slide the screen up slide the screen up

[Settings]

[Settings]

[Network & internet]

[Network & internet]

In the Home screen, In the Home screen, In the Home screen, slide the screen up slide the screen up slide the screen up

[Settings] [Display]

[Settings] [Display]

[Settings] [Display]

1 1 1 3 3 3 2 2 2 4 4 4

[Wi-Fi]*1

[Wi-Fi]*1 Select a Wi-Fi network Select a Wi-Fi network Enter a password (security Enter a password (security key) [CONNECT]

key) [CONNECT]

*1 If Wi-Fi is off, set it on.

*1 If Wi-Fi is off, set it on.

[Sleep]

[Sleep]

[Sleep]

Select the lighting time Select the lighting time Select the lighting time Peripheral devices Peripheral devices USB Type-C-3.5 conversion/TV Antenna cable USB Type-C-3.5 conversion/TV Antenna cable 01 (03SOHSA) 01 (03SOHSA) TypeC Common AC Adapter 01 (0601PQA) (sold TypeC Common AC Adapter 01 (0601PQA) (sold TypeC Common AC Adapter 02 (0602PQA) (sold TypeC Common AC Adapter 02 (0602PQA) (sold separately) separately) separately) separately) separately)*1 separately)*1 separately)*1 separately)*1 separately) separately) separately) separately) needed. needed. Common AC Adapter 05 (0501PWA) (sold Common AC Adapter 05 (0501PWA) (sold Common DC Adapter 03 (0301PEA) (sold Common DC Adapter 03 (0301PEA) (sold Micro-B Type-C Adapter (0601PHA) (sold Micro-B Type-C Adapter (0601PHA) (sold au Carrying Case G Black (0106FCA) (sold au Carrying Case G Black (0106FCA) (sold

*1 For use, Micro-B Type-C Adapter (sold separately) is

*1 For use, Micro-B Type-C Adapter (sold separately) is Information Information Accessories can be purchased from the au Online Accessories can be purchased from the au Online Shop. Shop.

(https://onlineshop.au.com/) (Japanese)

(https://onlineshop.au.com/) (Japanese) In the Home screen, In the Home screen, slide the screen up slide the screen up

[Settings]

[Settings]

[au Settings Menu]

[au Settings Menu]

Main unit Main unit Main unit Display Display Display Approx. 6.1 inches Approx. 6.1 inches Approx. 6.1 inches Organic EL (HDR-capable), Organic EL (HDR-capable), Organic EL (HDR-capable), Approx. 16.77 million colors Approx. 16.77 million colors Approx. 16.77 million colors Weight Weight Weight Dimension (W x H x T) Approx. 71 mm x 165 mm x Dimension (W x H x T) Approx. 68 mm x 158 mm x Dimension (W x H x T) Approx. 68 mm x 158 mm x 1,080 x 2,520 dots 1,080 x 2,520 dots 1,080 x 2,520 dots Approx. 178 g Approx. 164 g Approx. 164 g Internal memory Internal memory Internal memory Camera pixels Camera pixels Camera pixels 7.9 mm (9.1 mm where 8.2 mm (9.1 mm where 8.2 mm (9.1 mm where thickest) thickest) thickest) ROM: Approx. 64 GB ROM: Approx. 64 GB ROM: Approx. 64 GB RAM: Approx. 6 GB RAM: Approx. 6 GB RAM: Approx. 6 GB Camera: Effective pixels Camera: Effective pixels Camera: Effective pixels Approx. 12.2 million pixels Approx. 12.2 million pixels Approx. 12.2 million pixels 12.2 million pixels12.2 12.2 million pixels12.2 12.2 million pixels12.2 million pixels million pixels million pixels Front camera: Effective pixels Front camera: Effective pixels Front camera: Effective pixels Approx. 8 million pixels Approx. 8 million pixels Approx. 8 million pixels Continuous Continuous Continuous call time call time call time Continuous Continuous Continuous stand-by stand-by stand-by time time time Overseas Overseas Overseas

(GSM)

(GSM)

(GSM) Overseas Overseas Overseas

(GSM)

(GSM)

(GSM) In Japan In Japan In Japan Approx. 1,760 min. Approx. 1,760 min. Approx. 1,760 min. Approx. 590 min. Approx. 590 min. Approx. 590 min. In Japan In Japan In Japan Approx. 410 hours Approx. 410 hours Approx. 410 hours Approx. 420 hours Approx. 420 hours Approx. 420 hours Using TypeC Common AC Using TypeC Common AC Using TypeC Common AC Adapter 01 (sold separately):

Adapter 01 (sold separately):

Adapter 01 (sold separately):

Approx. 170 min. Approx. 170 min. Approx. 170 min. Using TypeC Common AC Using TypeC Common AC Using TypeC Common AC Adapter 02 (sold separately):

Adapter 02 (sold separately):

Adapter 02 (sold separately):

Approx. 140 min. Approx. 140 min. Approx. 140 min. Approx. 11 hours 20 min. Approx. 11 hours 20 min. Approx. 11 hours 20 min. Approx. 12 hours 0 min. Approx. 12 hours 0 min. Approx. 12 hours 0 min. Approx. 660 min. Approx. 660 min. Approx. 660 min. 10 10 10 Continuous Full Seg Continuous Full Seg Continuous Full Seg watching time watching time watching time Continuous 1Seg Continuous 1Seg Continuous 1Seg watching time watching time watching time Continuous tethering Continuous tethering Continuous tethering time time time Wi-Fi tethering Wi-Fi tethering Wi-Fi tethering maximum connection maximum connection maximum connection number number number Bluetooth Bluetooth Bluetooth function function function Communication Communication Communication type type type Output Output Output Compliant with Bluetooth Compliant with Bluetooth Compliant with Bluetooth standard Ver.5.0 standard Ver.5.0 standard Ver.5.0 Compliant with Bluetooth Compliant with Bluetooth Compliant with Bluetooth standard Power Class 1 standard Power Class 1 standard Power Class 1 Within 10 m with good Within 10 m with good Within 10 m with good visibility visibility visibility HSP, HFP, PBAP*3, A2DP, HSP, HFP, PBAP*3, A2DP, HSP, HFP, PBAP*3, A2DP, apt-X, AVRCP, SPP, OPP, apt-X, AVRCP, SPP, OPP, apt-X, AVRCP, SPP, OPP, HID, HOGP, MAP, DUN*4, HID, HOGP, MAP, DUN*4, HID, HOGP, MAP, DUN*4, GATT, PAN-NAP, PANU GATT, PAN-NAP, PANU GATT, PAN-NAP, PANU Communication Communication Communication coverage coverage coverage distance*1 distance*1 distance*1 Supported Supported Supported Bluetooth Bluetooth Bluetooth profile*2 profile*2 profile*2 Bluetooth function Radio frequency band 2.4 GHz band (2,400 MHz -

2,483.5 MHz)

*1 Varies by obstruction between communication devices or radio wave reception status.

*2 It is a specification according to purpose of use of Bluetooth device and is defined by Bluetooth standard.

*3 Some contacts data may not be displayed correctly

*4 Supported to some car navigation systems. For use, on the other party's device. refer to the au homepage. Information The continuous call time, continuous stand-by time, continuous Full Seg watching time, continuous 1Seg watching time and continuous tethering time may drop to less than half depending on the battery charging status, usage environment such as temperature, reception condition at the location where the product is used, and the function settings. USB Type-C-3.5 conversion/TV Antenna cable 01 Size Weight Length Approx. 117 mm Approx. 5 g 2 2 4 4 2 2 4 4 42 43 44 45 46 47 48 1 1 3 3 1 1 3 3 Follow the onscreen Follow the onscreen instruction instruction

*1 To not set, tap "NO THANKS".

*1 To not set, tap "NO THANKS". If Google account is not set, the setting of Google If Google account is not set, the setting of Google Assistant is not displayed. Assistant is not displayed. When a settings screen for Google Pay, etc. When a settings screen for Google Pay, etc. appears, follow the onscreen instructions. appears, follow the onscreen instructions. au-mail setting To use au-mail, subscription to LTE NET is required. If you did not subscribe it when you purchased the product, contact an au shop or Customer Service Center. Perform the initial settings in a place with good signal condition in Japan. If you perform in a place with bad signal condition or while moving, the settings may fail. The initial setting cannot be made via Wi-Fi communication. Depending on time zone, the initial settings may take from 30 seconds to 3 minutes. Wait for a while with "E

(Setting email address. Wait for a while.)" displayed on the screen. Receiving a call Receiving a call When the screen is OFF or on the lock When the screen is OFF or on the lock screen screen 1 Incoming call screen Swipe (flick) "

1 Incoming call screen Swipe (flick) "

" up

" up To reject the incoming call, swipe (flick) "

To reject the incoming call, swipe (flick) "

To answer with Answering Machine, swipe (flick) To answer with Answering Machine, swipe (flick)

" down.

" down.

". 2 Call [

2 Call [

screen) screen) When the screen is ON (except on the lock When the screen is ON (except on the lock 1 In the displayed notification, [ANSWER]

1 In the displayed notification, [ANSWER]

To reject an incoming call, tap "DECLINE". To reject an incoming call, tap "DECLINE". To answer with Answering Machine, tap the top To answer with Answering Machine, tap the top part of the notification Swipe (flick) "

part of the notification Swipe (flick) "

". 2 Call [

2 Call [

For inquiries, call: Customer Service Center For general information (toll free) Business hours 9:0020:00 (7 days a week) From non-au mobile phones/general subscriber phones From au mobile phones 157 without area code 0077-7-111 In case above numbers are not available (toll free). 0120-977-033 (except Okinawa) 0120-977-699 (Okinawa) For theft, loss, or malfunction (toll free) Business hours : 24 hours live support From au mobile phones 113 without area code From non-au mobile phones/general subscriber phones 0077-7-113 In case above numbers are not available (toll free). 0120-925-314 Repair and Delivery Support Center For theft, loss, or malfunction (toll free) Business hours 9:0020:00 (7 days a week) From au mobile phones/non-au mobile phones/general subscriber phones 0120-925-919 Mobile phone and PHS operators collect and recycle unused telephones, batteries and battery chargers at stores bearing the logo regardless of brand and manufacturer to protect the environment and reuse valuable resources. Sold by: KDDI CORPORATION, OKINAWA CELLULAR TELEPHONE COMPANY Manufactured by: Sony Mobile Communications Inc. November 2019, 1st Edition 1320-4683.1

Sony Mobile Communications Prepared by:

Contents responsible if other than preparer:

Approved by:

Confidential General Document number:

000335176 Date:

12 Remarks:

1(1) Revision:

4 E-Label and Label Location PY7-87607S 1 E-Label Location Users can access the FCC ID information within 3 step as the followings. Setting from Main Menu Settings -> About Phone -> Certificates FCC ID: PY7-87607S 2 Access to the required information on the e-label

(1) The user manual directs the user where to find the FCC ID E-Label. To view the regulatory compliance mark Find and tap [Settings]->[About Phone]->[Certificates]

Regulatory compliance mark such as FCC ID is displayed on the screen. Special codes or permissions are not required the above steps beyond the normal security protection to unlock the screen.

(2) Products must not require special accessories or supplemental plug-ins.

(3) The regulatory information is clearly legible without the aid of magnification.

(4) The regulatory information is secure. The user can not access and modify the regulatory information.

(5) The physical temporary label or the label on the packaging for purchasing and importation is attached in case of the device is sold in the United States. 3 FCC Statement FCC15.19(a) statement can be seen in the manual. It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.

Sony Mobile Communications, Inc. 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Remarks This document is managed in Infodoc. Date: February 21, 2020 SPORTON INTERNATIONAL, INC No. 52, Hwa Ya 1st Road Hwa Ya Technology Park Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan R.O.C FCC ID: PY7-87607S To Whom It May Concern:

Authorization Letter for Sporton I, the undersigned, hereby authorize Sporton to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Sporton on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Sporton as our representative, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

c) make claims regarding certification only in respect of the scope for which certification has been granted;

d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. Sony Mobile Communications, Inc. 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Remarks This document is managed in Infodoc. f) use certification only to indicate the products are certified as being in conformity with specified standards;

manner;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

i) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;

j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. Yours sincerely, ________________________________ Tomonori Nagano Head of Type Approval, Product Compliance Quality Assurance & Customer Services Sony Mobile Communications Inc. It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.

Remarks This document is managed in Infodoc. Sony Mobile Communications, Inc. 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Date: January 16, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To Whom It May Concern:

Power of Attorney for FCC applications Below individual is hereby authorized to sign applications, attestations and cover letters in regards of Sony Mobile Communications INC. applications, Grantee Code PY7. Tomonori Nagano Senior Manager Sony Mobile Communications Inc. Tel: +81367103241 Address: 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan E-mail: Tomonori.Nagano@sony.com Yours sincerely, ________________________________ Mika Kaneko Chief Regulatory Compliance Manager Sony Mobile Communications Inc. Tel: +81 3 6710 3225 Address: 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan E-mail: mika.kaneko@sony.com It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.

Sony Mobile Communications, Inc. 4-12-3 Higashi-shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Remarks This document is managed in Infodoc. Date: February 21, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC ID: PY7-87607S To Whom It May Concern:

Confidentiality Request Letter Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely.

- Schematic Diagram

- Block Diagram

- Theory of Operation

- Antenna Specification

- Parts List

- Tune up Information Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 180days from date of the Grant of Equipment Authorization.

- External Photos

Internal Photos

- Test Setup Photos

- User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Yours sincerely, ________________________________ Tomonori Nagano Head of Type Approval, Product Compliance Quality Assurance & Customer Services Sony Mobile Communications Inc. It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.