FCC ID: PY7-35141E BT Sensor

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6477331.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case 5-049-062-15(1) QM-SS1 Web Web https://rd1.sony.net/help/mobile/qm-ss1/ja/

1 1 2 3 1 2 3 5-049-062-15(1) QM-SS1 Web Web https://rd1.sony.net/help/mobile/qm-ss1/ja/

1 1 2 3 1 2 3 5-049-062-15(1) QM-SS1 Web Web https://rd1.sony.net/help/mobile/qm-ss1/ja/

1 1 2 3 1 2 3 IH AC USB PVD AI 140cm 190cm Li-ion 00 About the manual for this product For details, refer to the "Help Guide" (Web manual).

"Help Guide" (Web manual) https://rd1.sony.net/help/mobile/qm-ss1/en/

Note! Read this information before using your device. Note Do not use the device while damaged. This may result in a fire, burns, or injury. Do not use or store the device in locations with high humidity or dust or in locations that reach high temperatures. This may result in a fire, burns, or electric shock. If the device is to be used by children, their guardians must teach them how to use it correctly, and must prevent them from using it incorrectly. Otherwise, it may result in accidental ingestion, injury, or electric shock. Do not place the device in a location within the reach of infants and pets. Otherwise, it may result in accidental ingestion, injury, or electric shock. Note that the temperature may rise when you use the sensors continuously or while charging. Also, be careful not to unintentionally touch the device continuously such as by placing the device in your pocket or falling asleep. During motion capture or while charging, the temperature of the sensors or charging case may rise. Since continued direct contact of high temperature parts may cause redness of the skin, itching, rashes, and low-temperature burns depending on the customers physical constitution or condition, do not fall asleep while the device is in your pocket. Since the sensors, clip, and the attachments on bands and charging case have parts that cause magnetic induction, check that there are no metallic fragments (cutter blades, staples, etc.) attached. Attached substances may result in injury. When the substance leaks out from the internal battery, do not let it come into contact with the skin of your face or hands, or clothes. This may result in eye or skin injuries. If the inner substance comes into contact with your eyes, mouth, skin or clothes, immediately rinse the substance with clean water. Consult a doctor immediately after rinsing if the inner substance contacts your eyes or mouth. When the bands are soiled, wipe them off to clean them. You are recommended to clean them on a regular basis. If skin abnormalities occur through use of the sensors or bands, immediately stop using the device, and consult with a doctor. Itching, rashes, eczema, etc. may result based on the constitution and physical condition of the customer. The sensors, clip, and the attachments on bands and charging case have magnet(s). Swallowing magnet(s) could cause serious harm, such as choking hazard or intestinal injuries. If magnets (or a magnet) were swallowed, consult a doctor immediately. Keep this product away from children or other supervised individuals to prevent accidental ingestion. Do not dispose of the device together with usual trash. This may result in a fire, burns, or injury. Also, it may result in environmental destruction. Bring the unnecessary device to a consultation service counter or follow the instructions of your local municipality that has a recycling program. The sensors, clip, and the attachments on bands and charging case have magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device. Keep the sensors, clip, and the attachments on bands and charging case away from magnetic cards. The sensors, clip, and the attachments of bands and charging case use magnets. If you bring magnetic cards close to the device, the magnetism may change, and the cards may become unavailable. Do not press the band forcibly on your skin when using. Do not fasten it too tightly. This may result in discomfort, dermatitis, etc. Set the sensors into the charging case in the right orientation. Applying excessive force or letting the charging terminals on the charging case come into contact with the sensors in the reverse orientation may result in injury, malfunction, etc. Notes on use The AI-based estimation technology is used for the motion capture function of the device. Accuracy of estimation may vary by the usage condition or user's physical constitution. Perform the motion capture in a wide place, taking care not to hit people or objects. Be careful not to hurt your body. Stop using the device if you feel something unusual. Otherwise, it may result in bodily injury, accident, or malfunction. Taking care of and using your device Danger Do not use, charge, store or leave the device in an area with high temperature or susceptible to heat accumulation (e.g. near a fire or heating appliances, under a blanket, in direct sunlight or a car in the hot sun). This may result in a fire, burns, injury, or electric shock. Do not place the device inside or near microwave ovens, cooking appliances such as IH cooking heaters, or high pressure containers such as pressure cookers. This may result in a fire, burns, injury, or electric shock. Do not splash sand, soil or mud, or directly place the device on surfaces. Do not touch the device with sandy hands. This may result in a fire, burns, injury, or electric shock. Do not charge when the device is wet with liquids such as water (e.g. drinking water, sweat, seawater, urine of pet animals). Also, do not charge in an area exposed to water such as in a bathroom or near a humidifier. This may result in a fire, burns, injury, or electric shock. Do not apply strong pressure to the sensor or break the sensor. Particularly, when carrying the device in your pocket, do not let it come in contact against something or be caught between objects. This may damage the battery and result in a fire, burns, or injury. Do not disassemble or modify the device. This may result in a fire, burns, injury, or electric shock. Do not remove the internal battery from the sensor. This may result in a fire, burns, or injury. Do not allow liquids such as water (e.g. drinking water, sweat, seawater, urine of pet animals) to enter the charging port. This may result in a fire, burns, injury, or electric shock. Use Sony-branded AC adapters and cables. Using adapters and cables other than the specified ones may result in a fire, burns, injury, or electric shock. Do not place the device in a fire or apply heat to it. This may result in a fire, burns, or injury. Do not pierce the device with a sharp object (such as a nail), hit it with a hard object (such as a hammer), or apply excessive force to it such as by stepping on it. This may result in a fire, burns, or injury. Warning Do not apply strong force, impact, or vibration to the device by letting it fall, stepping on it, or throwing it. This may result in a fire, burns, injury, or electric shock. Do not allow conductive foreign material (metallic fragment, pencil lead, etc.) to come in contact with the charging port or allow dust to enter inside. This may result in a fire, burns, injury, or electric shock. Stop charging if it does not complete even when the specified charging time has elapsed. Otherwise, a fire, burns, or injury may result due to overcharge, etc. When entering locations where flammable gases and dust may occur, be sure to switch off the power of the device and stop charging beforehand. Otherwise, it may result in an explosion, fire, etc. due to flammable gas igniting. When using the device within locations such as gas stations, follow the instructions of each facility. Do not charge the device within locations such as gas stations. Also, if using the device in locations such as gas stations, be careful not to drop it. Be sure not to use the device while refueling. Otherwise, it may result in an explosion, fire, etc. due to flammable gas igniting. If any abnormalities such as abnormal odors, abnormal noises, smoke generation, heat generation, discoloration, and deformation are detected during use, charging, and storage, pay attention to safety and remove the cable from the charging case. This may result in a fire, burns, injury, or electric shock. When using the device on airplanes, follow the instructions The body height that the device can recognize body of each airline company. The radio waves may affect on-board electronic equipment. Prohibited use of devices on airplanes may be punished by law. For use in hospitals, follow the instructions of each medical facility. Power off the device in a place where its use is prohibited. The radio waves may affect electronic equipment and electronic medical equipment. If you are wearing electronic medical equipment, check with the manufacturer or vendor how the radio waves affect them. The radio waves may affect electronic medical equipment. Power off the device near electronic equipment that use high precision control or weak signals. The radio waves may affect electronic equipment, resulting in malfunction.

* Examples of electronic equipment that you should be careful of:

Hearing aids, implantable cardiac pacemaker, implantable cardioverter defibrillator, other electronic medical equipment, and other automatic control equipment. For users of implantable cardiac pacemakers, implantable cardioverter defibrillators, or other electronic medical equipment, check with the manufacturer or vendor how the radio waves affect them. If the internal battery leaks or has abnormal odor, stop using immediately and keep away from fire. The leaked liquid may catch fire resulting in ignition, explosion, etc. Be careful not to allow your pets to bite the sensor. This may result in a fire, burns, or injury due to ignition, explosion, heat generation, or leakage of the internal battery. Do not apply excessive force to the connection part while the cable is connected to the charging case. This may result in a fire, burns, injury, or electric shock. When removing or inserting cables from or to the charging case, do not apply excessive force such as by pulling on the cord, but remove or insert the cable straight out of or into the port. Failing to correctly remove or insert the cables may result in a fire, burns, injury, or electric shock. If the port or charging pin is bent or deformed, immediately stop using the device. Also, refrain from using it after restoring the deformation. This may result in a fire, burns, injury, or electric shock due to a short circuit of the USB port, charging port, or charging pin. movement correctly is between 140 cm (4 feet and 8 inches) and 190 cm (6feet and 2 inches). The motion capture function may not work correctly depending on the communication environment for connecting the device to a smartphone or other surrounding conditions. Be careful not to pinch your finger with the clip. It may cause bodily injury. Do not allow medicament such as insect repellent spray, sunscreen, or body cream to adhere to the device. This may deform or discolor the device. When such medicament is adhered, wipe it off. Do not splash water on the charging case. The charging case is not waterproof. Avoid using in a humid place such as in a bathroom, or exposing to rain drops. Note that malfunctions caused by water is out of warranty and repair may be refused. If the repair is available, it is acceptable for a fee because it is out of the warranty. Do not charge in the following places. Extremely high or low temperature, or high humidity Damp, dusty, or with excessive vibration Charging may stop to protect the battery or take more time in an area with high or low temperature. Avoid areas with high or low temperatures to restore the normal charging. The operating temperature of the sensors and charging case between 0C (32F) and 40C (104F). Do not use the device in locations that exceed the operating temperature. If charging a sensor while it is attached to the charging case, use a Sony AC adapter Fast Charger XQZ-UC1. Instructions to prevent reasonably foreseeable mishandling of the battery This product has a built-in lithium-ion battery. Do not disassemble or alter the product. Do not expose this product, including the battery, to excessive heat, fire, etc., for an extended period of time. Do not subject this product, including the battery, to extreme low-temperature conditions that may result in overheating and thermal runaway. Disposing of the battery into fire or a hot oven or mechanically crushing or cutting the battery can result in an explosion. Leaving the battery in an extremely high-temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas. Subjecting the battery to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. The battery must be charged before use. Always use the Sony-branded charger and USB cable. Refer to the manufacturers instructions or equipment manual for proper charging instructions. After extended periods of storage, it may be necessary to charge and discharge the battery several times to obtain maximum performance. DISPOSAL OF RECHARGEABLE BATTERIES You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, visit www.sony.com/ecotrade Caution: Do not handle damaged or leaking rechargeable batteries. Limited warranty Subject to the conditions of this limited warranty, Sony or its relevant local affiliates warrants this device against defects in design, material and workmanship at the time of its original purchase by a consumer and for 1 year thereafter. Contact an authorized Sony service partner to get further information. What we will do If, during the warranty period, this device fails to operate under normal use and service, due to defects in materials or workmanship, authorized Sony distributors or service partners will, at their discretion, either repair or replace the device in accordance with the conditions stipulated herein. Conditions 1. The warranty is valid only if the original receipt issued to the original purchaser by the authorised dealer, specifying the date of purchase and serial number, is presented with the device to be repaired or replaced. For customers in the United States Sony is not responsible for any labor or parts costs you incur relating to repairs or service from providers/

services other than from an authorised Sony service partner. For customers in other countries and regions Tampering with any of the seals on the device will void the warranty. 2. If Sony repairs or replaces the device, the repaired or replaced device shall be warranted for the remaining time of the original warranty period or for ninety days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of Sony. 3. This warranty does not cover any damage, malfunctions and/or failures of the device due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the device. Nor does this warranty cover any damage, malfunctions and/or failures of the device due to accident, modication or adjustment, acts of God or damage resulting from liquid outside of the approved levels. 4. There are no express warranties, where written or oral, other than this limited warranty. All implied warranties, including without limitation the implied warranties of merchantability or tness for a particular purpose, are limited to the duration of this limited warranty. In no event shall Sony or its vendors be liable for incidental or consequential damages of any nature whatsoever, including but not limited to lost prots or commercial loss, to the full extent those damages can be disclaimed by law. Some countries/regions do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR). To avoid damage to the device and injury to yourself, always wear the product as instructed in the manual and with the applicable straps/accessories. For question regarding your product or for the Sony Service Center nearest you, call 1-800-222-7669 (SONY). Suppliers Declaration of Conformity Trade Name : SONY Model : QM-SS1C Responsible Party : Sony Electronics Inc. Address : 16535 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number : 858-942-2230 For customers in the United States Owner's record The model and serial numbers are located on the sensors and charging case. Record the serial number in the space provided below. Refer to them whenever you call upon Sony Customer Support regarding this product. Model No. Serial No. Other Information In this manual, descriptions of services or applications offered by third parties may be included. You may need separate registrations to the provider or license agreement to use the above-mentioned services or applications. For the applications you accessed through third party websites, confirm the terms of use of the applicable website and the applied privacy policy beforehand. Sony does not guarantee third party websites and their services, availability of applications, or performance. Trademarks The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademark and trade names belong to their respective owners. USB Type-C is a trademark of USB Implementers Forum. Other product and company names mentioned herein may be the trademarks of their respective owners. In the main text, and marks are not noted. QM-SS1S

: 003-220334 Bluetooth Bluetooth2.4GHz2.400GHz2.4835GHz Bluetooth 1. 2. 3. 2.4 GHz 10m Web Web Web Bluetooth Bluetooth SIG, Inc. USB Type-CUSB Implementers Forum 1 https://www.sony.jp/support/

3 QM-SS1 https://sony.jp/reg/mmc/

IH AC USB PVD AI 140cm 190cm Li-ion 00 QM-SS1S

: 003-220334 Bluetooth Bluetooth2.4GHz2.400GHz2.4835GHz Bluetooth 1. 2. 3. 2.4 GHz 10m Web Web Web Bluetooth Bluetooth SIG, Inc. USB Type-CUSB Implementers Forum 1 https://www.sony.jp/support/

3 QM-SS1 https://sony.jp/reg/mmc/

5-049-062-15(1) QM-SS1 IH 5-049-062-15(1) AC 2022 Sony Corporation Printed in China USB AI 140cm 190cm Li-ion 00 QM-SS1S

: 003-220334 Bluetooth Bluetooth2.4GHz2.400GHz2.4835GHz Bluetooth 1. 2. 3. 2.4 GHz 10m Web Web Web Bluetooth Bluetooth SIG, USB Type-CUSB Implementers Forum 1 https://www.sony.jp/support/

3 QM-SS1 https://sony.jp/reg/mmc/

Mobile Motion Capture Reference Guide QM-SS1 5-049-062-15(1) QM-SS1 Web Web https://rd1.sony.net/help/mobile/qm-ss1/ja/

1 1 2 3 1 2 3 IH AC USB PVD AI 140cm 190cm Li-ion 00 QM-SS1S

: 003-220334 Bluetooth Bluetooth2.4GHz2.400GHz2.4835GHz Bluetooth 1. 2. 3. 2.4 GHz 10m Web Web Web Bluetooth Bluetooth SIG, Inc. USB Type-CUSB Implementers Forum 1 https://www.sony.jp/support/

3 QM-SS1 https://sony.jp/reg/mmc/

PVD Inc. IH https://rd1.sony.net/help/mobile/qm-

ss1/zh-cn/

1. 2. IH Sony

USB 140 cm48 190 cm62 032 40104 Sony XQZ-UC1 Sony USB https://service.sony.com.cn/

Sony Corporation

Sony Corporation https://www.sony.net/Products/

smartphones/trademarks-and-copyright. html ISM 5 000 2 400MHz 2 483.5MHz 20dBmEIRP 10

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) SJ/T 11364 GB/T 26572 GB/T 26572 Sony 1 Sony Sony Bluetooth SIG, Inc. Sony Corporation USB Type-CUSB Implementers Forum https://rd1.sony.net/help/mobile/qm-

ss1/zh-cn/

1. 2. Sony

USB 140 cm48 190 cm62 032 40104 Sony XQZ-UC1 Sony USB https://service.sony.com.cn/

Sony Corporation

Sony Corporation https://www.sony.net/Products/

smartphones/trademarks-and-copyright. html ISM 5 000 2 400MHz 2 483.5MHz 20dBmEIRP 10

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) SJ/T 11364 GB/T 26572 GB/T 26572 Sony 1 Sony Sony Bluetooth SIG, Inc. Sony Corporation USB Type-CUSB Implementers Forum https://rd1.sony.net/help/mobile/qm-

ss1/zh-cn/

1. 2. IH Sony

USB 140 cm48 190 cm62 032 40104 Sony XQZ-UC1 Sony USB https://service.sony.com.cn/

Sony Corporation

Sony Corporation https://www.sony.net/Products/

html ISM 5 000 2 400MHz 2 483.5MHz 20dBmEIRP 10

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) SJ/T 11364 GB/T 26572 GB/T 26572 Sony 1 Sony Sony Bluetooth SIG, Inc. Sony Corporation USB Type-CUSB Implementers Forum https://rd1.sony.net/help/mobile/qm-

ss1/zh-cn/

1. 2. IH Sony

USB 140 cm48 190 cm62 032 40104 Sony XQZ-UC1 Sony USB https://service.sony.com.cn/

Sony Corporation

Sony Corporation https://www.sony.net/Products/

smartphones/trademarks-and-copyright. html ISM 5 000 2 400MHz 2 483.5MHz 20dBmEIRP 10 SJ/T 11364 GB/T 26572 GB/T 26572 Sony 1 Sony Sony Bluetooth SIG, Inc. Sony Corporation USB Type-CUSB Implementers Forum 5-049-062-15(1) QM-SS1 https://rd1.sony.net/help/mobile/qm-

ss1/zh-cn/

1. 2. IH Sony

140 cm48 190 cm62 032 40104 Sony XQZ-UC1 Sony Sony Corporation

Sony Corporation https://www.sony.net/Products/

smartphones/trademarks-and-copyright. html ISM 5 000 2 400MHz 2 483.5MHz 20dBmEIRP 10

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) SJ/T 11364 GB/T 26572 GB/T 26572 Sony 1 Sony Sony Bluetooth SIG, Inc. Sony Corporation USB Type-CUSB Implementers Forum USB

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) USB https://service.sony.com.cn/

smartphones/trademarks-and-copyright.

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6477330.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Help Guide Mobile Motion Capture QM-SS1 Quick Startup Guide Download the mocopi app The mocopi app is an application that allows Mobile Motion Capture to be used on smartphones. Download the version of the app for your smartphone. Lets start use Pairing the sensors When you are using the device for the first time, pair the sensors using the mocopi app to prepare for motion capture. Follow the on-screen instructions to connect the sensors, install the sensors, attach the sensors to your body and perform calibration. 1 Performing motion capture (Overview of the motion capture screen) Attach the sensors to your body and make movements to move an avatar, convert movements into motion data or record movements on the mocopi app. Related information Charging Connecting the sensors Recording in Video mode Recording in Motion mode Preparing About this Help Guide Device unit parts Charging Installing the mocopi app Pairing the sensors Performing motion capture Connecting the sensors Installing/Removing the sensors Installing the sensors Removing the sensors Attaching the sensors to your body Performing calibration Overview of the motion capture screen Video mode Recording in Video mode Changing avatars Importing a custom avatar Changing the background Motion mode 2 Recording in Motion mode Setting up an external device Sending motion data to an external device Resetting motion capture Resetting the pose Recalibration Important information Precautions When you have finished using the device units Maintenance If the sensors or charging case gets wet Trademarks Legal information FCC Statement H-242-100-11(1) Copyright 2023 Sony Corporation 3 Help Guide Mobile Motion Capture QM-SS1 About this Help Guide This is the Mobile Motion Capture QM-SS1 Help Guide. Note System and application updates can present the features in your device in another way than described in this Help Guide. Notes on use Please be sure to read the supplied Reference Guide. Overview of the device Attach the sensors of the device to your body and make movements. You can move an avatar and save it in MP4 format or record the motion data in the BVH file format with the mocopi app on your smartphone. Refer to Specifications on the support page for the smartphones compatible with the device. H-242-100-11(1) Copyright 2023 Sony Corporation 4 Help Guide Mobile Motion Capture QM-SS1 Device unit parts Sensor 1. 2. 3. 4. 5. 6. HEAD (Head) sensor Attached to your head. WRIST/L (Wrist/left) sensor Attached to your left wrist. WRIST/R (Wrist/right) sensor Attached to your right wrist. ANKLE/R (Ankle/right) sensor Attached to your right ankle. ANKLE/L (Ankle/left) sensor Attached to your left ankle. HIP (Hip) sensor Attached to your hip. Front of the sensor (same for each sensor) 1. 2. Button Indicator (blue/orange/green) The indicator flashes in blue when the power is turned on. When the battery level is at approximately 15% or lower, the indicator flashes in orange. To turn the sensor off, press and hold the button and then release your finger when the indicator lights up in green. If you long press the button (5 seconds), the indicator lights up in green again and the sensor force restarts. While the sensor is charging, the indicator flashes slowly in orange. When the battery level reaches over approximately 80%, the indicator on the sensor lights up in green. When the sensor is connected via Bluetooth using the mocopi app, the indicator flashes in green. 5 Back of the sensor (same for each sensor) 1. 2. 3. Indented parts for attachment Attaches the sensor to the protruding parts of the socket or the charging case. Serial number This is the sensor number. Charging port Fits the sensor onto the charging pins on the charging case. Head strap (for the head) 1. 2. Socket Strap adjuster Adjusts the length and fit of the head strap. Wrist straps (for the wrists/x2) The short straps are for the wrists. 1. Socket Ankle straps (for the ankles/x2) The long straps are for the ankles. 1. Socket Clip (for the hip) 1. Socket 6 Charging case 1. 2. 3. USB Type-C port Use a separately sold USB Type-C cable and AC adapter to connect the charging case to a power outlet and charge the sensors. Charging pins Lid Related Topic Charging Pairing the sensors Installing the sensors Removing the sensors H-242-100-11(1) Copyright 2023 Sony Corporation 7 Help Guide Mobile Motion Capture QM-SS1 Charging The sensors contain built-in lithium-ion rechargeable batteries. Always use the following Sony-branded charger (sold separately), as other types of chargers can increase charging time, not charge your device at all, or even damage your device. Fast Charger XQZ-UC1 1 Set the sensors into the charging case. Put each sensor into a concave part of the charging case. Each sensor will be set to the correct position in the charging case by the built-in magnet. Close the lid of the charging case. 2 Connect the charging case to an AC outlet. Use a separately sold USB Type-C cable and AC adapter. The indicator on each sensor slowly flashes in orange and charging starts. When the sensors are charged at 80% or higher in battery level, the indicator on each sensor lights up in green. 8 Disconnect the USB Type-C cable. Note Before charging, wipe away any moisture on the sensors and charging case and then set the sensors into the charging case. Make sure there is no dust or foreign material adhered to the sensors or the concave parts of the charging case when you set the sensors in the case. If the sensors are not set into the charging case correctly, charging may not start, or you may not be able to close the lid. Make sure that the sensors are not rotated. Charge with all the sensors set in the case correctly and check that the indicator on every sensor lights up. The rate the rechargeable battery is consumed may vary among the sensors depending on the settings or usage conditions. Therefore, the charging time of the rechargeable battery may vary for each sensor. However, this is not a malfunction. If you are storing the sensors for a long period of time, charge the battery once every 6 months to avoid over-discharge. If the sensors have not been used for a long time, it may take longer to charge the battery. If there is a problem with the rechargeable battery on the sensor, an error is detected during charging and the indicator on the sensor flashes in red. It is recommended to charge in a place with an ambient temperature between 15 C and 35 C (59 F - 95 F). Efficient charging may not be possible beyond this range. If the problem persists, consult your nearest Sony dealer. If the sensors have not been used for a long time, the indicators on the sensors may not immediately light up when charging. Wait a moment for the indicators to light up. Avoid exposure to extreme temperature changes, direct sunlight, moisture, sand, dust, and electrical shock. Never leave the device in a parked vehicle. The sensors and the charging case may become warm during charging or for a while after charging. However, this is not a malfunction. Related Topic Device unit parts H-242-100-11(1) Copyright 2023 Sony Corporation 9 Help Guide Mobile Motion Capture QM-SS1 Installing the mocopi app You can perform all the Mobile Motion Capture operations with the mocopi app installed on your smartphone. Make sure to install the mocopi app on your smartphone. 1 Download the mocopi app from the Google Play Store or App Store and install it on your smartphone. The mocopi app is an application that allows Mobile Motion Capture to be used on smartphones. Download the version of the app for your smartphone. Download from the Google Play Store: https://##############

Download from the App Store: https://##############

Hint Updates for the sensor firmware are available via the mocopi app. H-242-100-11(1) Copyright 2023 Sony Corporation 10 Help Guide Mobile Motion Capture QM-SS1 Pairing the sensors When using the device for the first time, pair the sensors with the mocopi app. 1 2 3 Find and tap the mocopi app on your smartphone to launch the app. On the initial setup screen, tap [SET UP]. Follow the on-screen instructions to proceed with the setup. On the [Pairing the sensors] screen, tap [NEXT]. Follow the on-screen instructions to set up the pairing. When the [Pairing request] screen appears, tap [PAIR & CONNECT] > [PAIR]. When pairing is complete, the [Connecting the sensors] screen appears. Hint If the [Pairing request] screen disappears, swipe down on the screen to display the message. Note Check that the Bluetooth function for your smartphone is enabled before pairing the sensors. If the pairing of the sensors failed, check the following. If the sensors are turned off, turn them on. If another Bluetooth device is connected to your smartphone, disconnect it. If the sensors are connected to another smartphone, disconnect them. Turn off the sensors, wait for about 10 seconds, and then turn them on again. If the sensors have previously been paired with your smartphone, delete them on the Bluetooth device list on your smartphone. Restart your smartphone. Reset the sensors. To reset a sensor, press the power button 10 times. The reset is complete when the indicator flashes in red and blue alternately. The Bluetooth device information registered to the sensor is erased by the reset. If you cannot turn on the sensor, check the following. The battery level may be low. Charge the sensor. If the sensor is charged but you cannot turn on the power, press and hold the button on the sensor for 5 seconds to restart. Unpairing the sensors 1. 2. On the [Sensor status] screen, tap Tap [UNPAIR].

(menu icon) for the sensor you want to unpair. Related Topic Connecting the sensors Installing the sensors Removing the sensors 11 Attaching the sensors to your body Performing calibration Charging Device unit parts H-242-100-11(1) Copyright 2023 Sony Corporation 12 Help Guide Mobile Motion Capture QM-SS1 Connecting the sensors To perform motion capture, first connect the sensors with the mocopi app. 1 2 3 4 Find and launch the mocopi app and tap [START MOTION CAPTURE]. Press the button on each sensor to turn the sensor on and place it on a flat surface. The indicator on each sensor flashes in blue. If the indicator does not light up or if it flashes in orange, charge the sensor before connecting it to the app. On the [Connecting the sensors] screen, tap [CONFIRM]. On the [Sensor status] screen, tap [CONNECT SENSORS]. The sensors begin connecting with the app. When the connection is established, the indicator on the sensor flashes in green. 5 On the [Turning on the sensors] screen, tap [CONFIRM]. The [Securing the sensors] screen appears. Note Make sure to turn on the Bluetooth function on your smartphone before connecting the sensors. Once you start connecting the sensors, check the information displayed on the screen and do not move the sensors until they are all connected with the app. When connecting the sensors, avoid placing vibrating devices (for example, a laptop PC) near the sensors. If [Could not find sensors] appears, check the following. If the sensors are turned off, turn them on. If another Bluetooth device is connected to your smartphone, disconnect it. If the sensors are connected to another smartphone, disconnect them. Turn off the sensor, wait about 10 seconds, and then turn it on again. Delete the sensor on the Bluetooth device list on your smartphone and then try pairing it again. Restart your smartphone. Reset the sensor. To reset the sensor, press the power button 10 times. When the reset is complete, the indicator flashes in red and blue alternately. The Bluetooth device information registered to the sensor is erased by the reset. Try pairing the sensor again. If you cannot turn on the sensor, check the following. The battery level may be low. Charge the sensor. If the sensor is charged but you cannot turn on the power, press and hold the button on the sensor for 5 seconds to restart. If a firmware update starts when you are connecting the sensors, wait until it ends. Firmware cannot be updated while the sensors are charging in the charging case because Bluetooth is disconnected at this time. 13 Related Topic Pairing the sensors Installing the sensors Attaching the sensors to your body Performing calibration Overview of the motion capture screen Charging Device unit parts H-242-100-11(1) Copyright 2023 Sony Corporation 14 Help Guide Mobile Motion Capture QM-SS1 Installing the sensors 1 2 Refer to [Straps and sockets] on the [Securing the sensors] screen to see the strap type. Set the sensor onto the socket. Hold the sensor close to the socket. The built-in magnet fits the sensor into the correct position on the socket, and the sensor is locked into place on both sides by the clips (A). You can check if the sensor is set correctly on the socket by seeing whether the marks on the sides (B) are aligned. 3 Once all the sensors are installed and secured in place on the sockets, tap [NEXT] on the [Securing the sensors] screen. The [Attaching the sensors] screen appears. Hint All the sensors can be installed in the same way. Note Before installing the sensors, make sure that there is no dust or foreign material adhered to the sensors or the sockets. After installing the sensors, make sure that the sensors are not rotated on the socket and that the clips of the sockets are locked in place. If the sensors are not secured properly, they may fall off during motion capture and become damaged or harm those in your surroundings. Related Topic 15 Attaching the sensors to your body Removing the sensors Device unit parts H-242-100-11(1) Copyright 2023 Sony Corporation 16 Help Guide Mobile Motion Capture QM-SS1 Removing the sensors 1 Pinch the clips on both sides of the socket to open up the clips. AClip 2 With the clips pinched open, carefully remove the sensor from the socket. Hint Carefully tilt the sensor to gently remove it from the socket. All the sensors can be removed in the same way. Note Carefully remove the sensor from the socket while taking care not to drop the sensor. When removing a sensor, first undo the sensor strap or the clip for the hip sensor and take it off your body before removing the sensor. Related Topic Installing the sensors Device unit parts H-242-100-11(1) Copyright 2023 Sony Corporation 17 Help Guide Mobile Motion Capture QM-SS1 Attaching the sensors to your body 1 2 Following the instructions on the [Attaching the sensors] screen, attach the sensors. When you are finished attaching the sensors, tap [CONFIRM]. The [Calibration] screen appears. Note Tighten the straps so that they do not come loose. Wear the wrist straps (for the wrists) directly against your skin. Avoid wearing the straps over clothing. Wear the ankle straps (for the ankles) directly against your skin or above your socks. Avoid wearing the straps over clothing. Firmly insert the clip (for the hip) into the top of your pants or belt and make sure the clip is secure. Attaching the sensor to your shirt or outerwear may cause the clip to come loose or fall off during intense movement. If the sensor falls off during use, your movements may not be recognized correctly. If a sensor sustains an impact after falling off, etc. after it is connected to the app, reconnect it. Related Topic Performing calibration Device unit parts H-242-100-11(1) Copyright 2023 Sony Corporation 18 Help Guide Mobile Motion Capture QM-SS1 Performing calibration Calibration is the detection of the orientation of the sensors on your body by the app for correct motion capture. The position of a sensor changes even when the same user is reattaching the sensor. Perform calibration every time you put on the sensors before starting motion capture. 1 2 On the [Calibration] screen, select the users height and tap [NEXT]. Tap [START CALIBRATION] and stand up straight. Hint While standing up straight, keep your feet shoulder-width apart and your arms relaxed and down at your sides. 3 After the sound and vibration signals from your smartphone, take one step forward and then stand up straight again.

[Successfully calibrated] appears on the screen and the motion capture screen appears. Note Do not hold your smartphone while you are standing up straight. Stand still without moving your body. Do not look at your smartphone screen during calibration. Doing so shifts your head sensor and prevents the sensors from being calibrated accurately. After you start the calibration, take one step forward with the sound and vibration and then stand up straight again. If the calibration fails, you may have incorrectly taken one step forward after you stood up straight the first time. Tap [WATCH AGAIN] in the center of the [Calibration] screen to check the movement. You can also watch a video of the calibration movements by accessing

(menu icon) > [Tutorial video]. If calibration fails even after you perform the steps correctly, reconnect the sensors. Take the sensors off your body, remove them from their sockets, place them on a flat surface and then reconnect them. Tap

(menu icon) > [Return to start menu]. Related Topic Overview of the motion capture screen Resetting the pose Recalibration H-242-100-11(1) Copyright 2023 Sony Corporation 19 Help Guide Mobile Motion Capture QM-SS1 Overview of the motion capture screen 1. 2. Check the sensors You can check the connection status or battery level of each sensor. Video Record the avatar's movements as a video. 20 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Motion Save recorded motion data in the BVH file format to the local storage of a smartphone, or send the data to an external device, etc. Menu icon Open the menu.

[Fix camera]: Turn this on to move the camera position and lock it in one place on the screen. Turn this off to enable the camera to automatically track the avatar. The avatar is always displayed in the center of the screen.

[Lock hip]: Turn this on to lock the hip position in one place when recording while sitting, etc. to keep the avatars movements steady. Sit in a chair, etc. to keep your hip in one position before turning on this setting.

[Settings]: Display the [Settings] screen.

- [Change unit]: Select Meters or Inches.

- [Pose reset sound]: Select ON or OFF.

- [PC connection settings]: Set the IP address, outbound port settings and transfer format for the transmission of recorded data to an external device.

[Tutorial video]: Start the tutorial video.

[Return to start menu]: Return to the start menu.

[About this app]: Display the app information. LIBRARY Check the recorded data. The icon changes depending on whether the app is in Video mode and Motion mode. MIC (Video mode) Turn the microphone on/off. When MIC is on, avatar lip-syncing is enabled. This function does not work with Bluetooth headsets. SAVE/SEND (Motion mode) Select [SAVE] to save data to the local storage on a smartphone. Select [SEND] to send data to an external device. RECALIBRATE Perform recalibration when changing the user or when an attached sensor has shifted. Record button (red/blue) Start or stop recording motion capture. The color of the button and the inside of the icon change according to the selected mode. RESET POSE Reset the pose to fix any inconsistencies between the avatars movements and your actual body movements. MIRROR Flip the avatar orientation. BACKGROUND Change the background of the screen. AVATAR Select an avatar to use. Related Topic Charging Connecting the sensors Recording in Video mode Recording in Motion mode Setting up an external device Sending motion data to an external device Recalibration Resetting the pose Changing the background Changing avatars H-242-100-11(1) Copyright 2023 Sony Corporation 21 Help Guide Mobile Motion Capture QM-SS1 Recording in Video mode In Video mode, you can move an avatar to record the movements in MP4 format. 1 2 3 On the motion capture screen, tap [Video]. Tap the record button (red) to start motion capture. Recording starts after the countdown. Tap the record button (red) to stop the motion capture. The video data is saved to your smartphone. Hint Recorded data can be played with a video player application, etc. on your smartphone. You can also play the data from

[LIBRARY] on the motion capture screen. You can select your preferred avatar from [AVATAR] on the motion capture screen. Note When using a custom avatar, depending on the avatar, this can lower the performance of the motion capture. When the [Low performance. The avatar quality may be too high.] message appears, it is recommended to lower the avatar data quality. Record button on the screen The record button on the screen changes as follows according to the shooting mode.

(Start recording button)

(Stop recording button) Related Topic Overview of the motion capture screen Changing avatars Importing a custom avatar Changing the background Resetting the pose Recalibration H-242-100-11(1) Copyright 2023 Sony Corporation 22 Help Guide Mobile Motion Capture QM-SS1 Changing avatars You can change the avatar you wish to use on the motion capture screen. 1 On the motion capture screen, tap [AVATAR]. The [Select avatar] screen appears. When you tap [AVATAR] for the first time on Android smartphones, the Documents folder is displayed. Tap [USE THIS FOLDER]. Custom avatars are saved to the Documents folder. 2 Select an avatar. You can select a preinstalled avatar or custom avatar in the VRM file format. Related Topic Overview of the motion capture screen Importing a custom avatar Recording in Video mode H-242-100-11(1) Copyright 2023 Sony Corporation 23 Help Guide Mobile Motion Capture QM-SS1 Importing a custom avatar You can import a custom avatar (VRM file) from an external device to your smartphone. Importing from Windows to an Android smartphone 1. 2. Connect an external device (Windows) and a smartphone with a USB cable. On File Explorer in Windows, copy a VRM file to the Documents folder on the smartphone. Note If you selected a folder other than Documents after you tapped [AVATAR] on the motion capture screen for the first time, copy the VRM file to the folder you selected at that time. Importing from macOS to an Android smartphone 1. 2. Connect an external device (macOS) and a smartphone with a USB cable. On Android File Transfer, copy a VRM file to the Documents folder on the smartphone. Note Android File Transfer must be installed on the external device (macOS) in advance. If you selected a folder other than Documents after you tapped [AVATAR] on the motion capture screen for the first time, copy the VRM file to the folder you selected at that time. Importing from macOS to an iPhone 1. 2. 3. 4. Connect an external device (macOS) and a smartphone with a USB cable. On Finder, select iPhone. Select [Files] on Finder. Copy a VRM file into the mocopi folder. Importing from Windows to an iPhone 1. 2. 3. 4. Connect an external device (Windows) and a smartphone with a USB cable. On the iTunes app, select iPhone and select [File Sharing]. Select the mocopi app. Drag and drop a VRM file to copy. Note The iTunes app must be installed on the external device (Windows) in advance. Related Topic Changing avatars 24 H-242-100-11(1) Copyright 2023 Sony Corporation 25 Help Guide Mobile Motion Capture QM-SS1 Changing the background You can change the background of the motion capture screen. 1 On the motion capture screen, tap [BACKGROUND]. The [EDIT BACKGROUND] screen appears. 2 Select the background. The screen background changes. Related Topic Overview of the motion capture screen H-242-100-11(1) Copyright 2023 Sony Corporation 26 Help Guide Mobile Motion Capture QM-SS1 Recording in Motion mode In motion mode, you can record motion data in the BVH file format. 1 2 3 4 On the motion capture screen, tap [Motion]. Tap [SAVE/SEND] and then select [SAVE]. The motion mode icon appears in the record button (red). Tap the record button (red) to start motion capture. Recording starts after the countdown. Tap the record button (red) to stop motion capture. The data (BVH file) is saved to the local storage on your smartphone. Hint The data (BVH file) is saved to the following location on your smartphone. iPhone: In MotionData in the mocopi folder Android: In the folder specified by the user when data is saved for the first time. You can also play back the recorded data (BVH file) by accessing [LIBRARY] on the motion capture screen. For the procedure to sending the data recorded in motion mode to an external device, see Sending motion data to an external device. Record button on the screen The record button on the screen changes as follows according to the shooting mode.

(Start recording button)

(Stop recording button) Related Topic Overview of the motion capture screen Setting up an external device Sending motion data to an external device H-242-100-11(1) Copyright 2023 Sony Corporation 27 Help Guide Mobile Motion Capture QM-SS1 Setting up an external device Set the IP address, outbound port number and transfer format for the external device to receive data. 1 Tap the menu icon on the motion capture screen. The menu appears. 2 Tap [Settings]. The [Settings] screen appears. 3 Tap [PC connection settings]. The [PC connection settings] screen appears. 4 Set the [IP address] and [Outbound port settings], and select the [Transfer format] for the external device to receive data. 5 Tap [OK]. Allows data to be sent from the mocopi app to the external device. Hint To send motion data to VRChat, select [VRChat (OSC)]. The default port number for VRChat is 9000. Note The motion capture data transmission function is designed to be used on a local network, and therefore, the data is not encrypted. If the data is transmitted via the internet, the communications data may be intercepted and leaked. Related Topic Overview of the motion capture screen Sending motion data to an external device Recording in Motion mode H-242-100-11(1) Copyright 2023 Sony Corporation 28 Help Guide Mobile Motion Capture QM-SS1 Sending motion data to an external device Send motion data to an external device with the mocopi app. 1 2 3 4 5 Connect your smartphone to an external device. On the motion capture screen, tap [Motion]. Tap [SAVE/SEND] to select [SEND]. The icon used to send data to an external device appears in the record button (green). Tap the record button (green) to start motion capture. Motion data transmission starts after the countdown. Tap the record button (green) to stop the motion capture. Motion data transmission stops. Note If data cannot be communicated to an external device, check for the following. The IP address, outbound port settings and transfer format set on the [PC connection settings] screen are correct. Data reception at the specified port number (UDP) is not being blocked by a firewall, etc. on the external device. Record button on the screen The record button on the screen changes as follows according to the shooting mode.

(Start recording button)

(Stop recording button) Related Topic Overview of the motion capture screen Setting up an external device Recording in Motion mode H-242-100-11(1) Copyright 2023 Sony Corporation 29 Help Guide Mobile Motion Capture QM-SS1 Resetting the pose When the avatars movements do not follow your actual movements while you are recording motion capture, try resetting the pose to remove any inconsistencies between your movements and motion capture. 1 On the motion capture screen, tap [RESET POSE]. Follow the on-screen instructions to reset the pose. Hint If the inconsistencies between your movements and the avatars movements persist after you reset the pose, try recalibrating. Related Topic Overview of the motion capture screen Recalibration H-242-100-11(1) Copyright 2023 Sony Corporation 30 Help Guide Mobile Motion Capture QM-SS1 Recalibration Recalibrate after you reattach a sensor during motion capture or when changing the user. 1 2 3 On the motion capture screen, tap [RECALIBRATE].

[Motion capture will end.] appears. Tap [CONTINUE]. Tap [START CALIBRATION] and stand up straight. Hint When standing up straight, keep your feet shoulder-width apart and your arms relaxed and down at your sides. 4 After the sound and vibration signals from your smartphone, take one step forward and then stand up straight again.

[Successfully calibrated] appears on the screen and then the motion capture screen appears. Hint If you notice an inconsistency between the avatars movements and your own while performing motion capture over an extended period of time, perform RESET POSE. Note Do not hold your smartphone while you are standing up straight. Stand still without moving your body. Do not look at your smartphone screen during calibration. Doing so shifts your head sensor and prevents the sensors from being calibrated accurately. After you start the calibration, take one step forward with the sound and vibration and then stand up straight again. If the calibration fails, you may have incorrectly taken one step forward after you stood up straight the first time. Tap [WATCH AGAIN] in the center of the [Calibration] screen to check the movement. You can also watch a video of the calibration movements by accessing

(menu icon) > [Tutorial video]. If calibration fails even after you perform the steps correctly, reconnect the sensors. Take the sensors off your body, remove them from their sockets, place them on a flat surface and then reconnect them. Tap

(menu icon) > [Return to start menu]. Related Topic Overview of the motion capture screen Resetting the pose 31 H-242-100-11(1) Copyright 2023 Sony Corporation 32 Help Guide Mobile Motion Capture QM-SS1 Precautions Notes on motion capture The AI-based estimation technology is used for the motion capture function of the device. Accuracy of estimation may vary by the usage condition or user's physical constitution. Perform the motion capture in a wide place, taking care not to hit people or objects. Be careful not to hurt your body. Stop using the device if you feel something unusual. Otherwise, it may result in bodily injury, accident, or malfunction. The body height that the device can recognize body movement correctly is between 140 cm (4 feet and 8 inches) and 190 cm (6 feet and 2 inches). The motion capture function may not work correctly depending on the communication environment for connecting the device to a smartphone or other surrounding conditions. Note on attaching the devices Be careful not to pinch your finger with the clip. It may cause bodily injury. Other notes Do not allow medicament such as insect repellent spray, sunscreen, or body cream to adhere to the device. This may deform or discolor the device. When such medicament is adhered, wipe it off. Do not splash water on the charging case. The charging case is not waterproof. Avoid using in a humid place such as in a bathroom, or exposing to rain drops. Note that malfunctions caused by water is out of warranty and repair may be refused. If the repair is available, it is acceptable for a fee because it is out of the warranty. Do not leave the sensors, clip, sockets on the straps or charging case in places where they are exposed to high temperatures and keep them away from objects that reach high temperatures. Do not charge or use the devices in places with the following properties. Extremely high or low temperature, or high humidity Damp, dusty, or with excessive vibration Charging may stop to protect the battery or take more time in an area with high or low temperature. Avoid areas with high or low temperatures to restore the normal charging. Cleaning the device If the surface is dirty, wipe it clean with a soft dry cloth. If you wipe it using detergent, etc., this can cause discoloration on the surface of the device units. Do not use solvents such as thinner, benzene, or alcohol, as they may damage the finish on the surface of the device units or cause other damages. For details, see the Maintenance section. Do not use the sensors, clip, and the sockets on straps and charging case near medical devices Radio waves can affect cardiac pacemakers and medical devices. Do not use the device units and charging case in crowded places or inside a medical institution. The sensors, clip, and the sockets on straps and charging case have magnets which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place the sensors close to persons who use such medical devices. Consult your doctor before using the sensors if you use any such medical device. Keep the sensors, clip, and the sockets on straps and charging case away from magnetic cards The sensors, clip, and the sockets on straps and charging case contain magnets. If you bring magnetic cards close to them, the magnetism may change, and the cards may become unavailable. 33 Related Topic Maintenance H-242-100-11(1) Copyright 2023 Sony Corporation 34 Help Guide Mobile Motion Capture QM-SS1 When you have finished using the device units When you have finished using the sensors, be sure to set the sensors in the charging case. Close the lid of the charging case. Note If perspiration or water is left on the charging ports of the sensors, it may impair the ability to charge the sensors. Immediately wipe off any perspiration or water on the charging ports after use. If the charging ports of the sensors or the charging pins of the charging case get dirty, wipe them clean with a soft dry cloth. A:Sensor charging ports B:Charging case charging pins When perspiration or dirt is adhered to the straps, wipe it with a soft, dry cloth. When the sensors get wet When the sensors get wet, wipe any moisture with a soft, dry cloth. H-242-100-11(1) Copyright 2023 Sony Corporation 35 Help Guide Mobile Motion Capture QM-SS1 Maintenance Perform regular maintenance by following the procedures below. 1 Clean the surfaces of the device units. If the surfaces of the sensors, clip, sockets on the straps or charging case become dirty, wipe them clean with a soft dry cloth. If you wipe them down using detergent, etc., this can cause discoloration on the surfaces of the device units. Do not use solvents such as thinner, benzene, or alcohol, as they may damage the finish on the surfaces of the device units. When the sensors get wet, wipe any moisture with a soft, dry cloth. Do not allow the device units to remain with water droplets attached in a cold environment as the water may freeze. 2 Clean the charging ports and charging pins. If foreign matter or moisture, such as perspiration, etc., is left on the charging ports of the sensors or the charging pins of the charging case, corrosion may occur in the charging ports or charging pins and prevent charging. When you have finished using the device units, make sure to gently clean the charging ports and charging pins with a soft dry cloth or cotton swab. When the sensors cannot be charged, it may help to try thoroughly cleaning the charging ports and charging pins. Charging ports and charging pins that need maintenance Sensor A:Sensor charging ports Charging case B:Charging case charging pins 3 Dry the device units. After cleaning is complete, leave the device units to dry thoroughly in room temperature. 4 Set the sensors in the charging case. 36 After maintenance as well as after cleaning and drying the sensors, set the sensors in the charging case and put them away. Note Do not wash the straps in a washing machine. Doing so may damage the straps. H-242-100-11(1) Copyright 2023 Sony Corporation 37 Help Guide Mobile Motion Capture QM-SS1 If the sensors or charging case gets wet About the water and dust resistance of the sensors The sensors have water resistance specifications with an approximate IPX5 or IPX8 rating and dust resistance specifications with an approximate IP6X rating. The sensors cannot be used in water. Unless the sensors are used correctly, water may get into the sensors and cause fire, electric shock, or malfunctions. Note the following cautions carefully and use the sensors correctly. IPX5: Specifies that the sensor functions are protected against low pressure streams of water from any direction. IPX8: Specifies that the sensor functions are protected against prolonged submersion in water under conditions agreed upon by the parties involved. IP6X: Specifies that the sensors are protected against the types of dust used in the dust resistance tests (less than 75 m in diameter) and that this dust cannot enter the sensors. Liquids that the water resistant performance specifications of the sensors apply to Applicable:

Fresh water, tap water Not applicable:

Liquids other than those above (examples: soapy water, detergent water, water with bath agents, shampoo, hot spring water, hot water, pool water, seawater, etc.) The water resistant performance of the sensors is based on measurements performed by Sony under the conditions described above. Note that malfunctions resulting from water immersion caused by customer misuse are not covered by the warranty. To protect the sensors and charging case from being damaged Carefully note the precautions below to ensure proper use of the sensors and charging case. The charging case is not waterproof or dustproof. Do not allow the sensors or charging case to remain wet in a cold environment, as the water may freeze. To prevent malfunction, make sure to wipe off any water after use. Do not place the sensors in water or use them in a humid place such as a bathroom. Do not drop the sensors or expose them to mechanical shock. Doing so may deform or damage the sensors, resulting in deterioration of water and dust resistance performance. Use a soft dry cloth to wipe off any water that gets on the sensors. Charging the sensors or charging case while they are wet with perspiration, etc. can corrode the charging ports and charging pins. Before charging, wipe off any moisture with a soft dry cloth and leave to dry in room temperature. Repairs in case of a malfunction without care are not covered by the free warranty. When the charging ports of the sensors or the charging pins of the charging case get dirty, wipe them clean with a soft dry cloth. Do not wash pants or shirts with the device units left in the pockets. If the device units are cracked or deformed, refrain from using them near water, or contact your nearest Sony dealer. H-242-100-11(1) Copyright 2023 Sony Corporation 38 Help Guide Mobile Motion Capture QM-SS1 Trademarks iPhone, iPod touch, macOS, Mac and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Google, Android and Google Play are trademarks of Google LLC. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Group Corporation and its subsidiaries is under license. USB Type-C and USB-C are registered trademarks of USB Implementers Forum. All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. In this manual, TM and marks are not specified. H-242-100-11(1) Copyright 2023 Sony Corporation 39 Help Guide Mobile Motion Capture QM-SS1 Legal information This Help Guide is published by Sony Corporation (herein after referred to as Sony) or its local affiliated company, without any warranty. Improvements and changes to this Help Guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony at any time and without notice. Such changes will, however, be incorporated into new editions of this Help Guide. All illustrations are for illustration purposes only and may not accurately depict the actual device. This Help Guide may reference services or applications provided by third parties. Use of such programming or services may require separate registration with the third-party provider, payment of fees or provision of credit card information, as well as be subject to additional terms of use, change, interruption or discontinuance at any time. For applications accessed on or through a third-party website, please review such websites terms of use and applicable privacy policy in advance. Sony does not warrant or guarantee the availability or performance of any third-party application, websites, or offered services. In the event software accompanying or provided in conjunction with your device is provided with additional terms and conditions, such provisions shall also govern your possession and usage of the software. H-242-100-11(1) Copyright 2023 Sony Corporation 40 Help Guide Mobile Motion Capture QM-SS1 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. H-242-100-11(1) Copyright 2023 Sony Corporation 41

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6477325.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Sony Corporation 1-7-1 Konan Minato-ku, Tokyo, 108-0075, Japan Label Location PY7-35141E 1 Location FCC ID: PY7-35141E

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6477322.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Sony Corporation 1-7-1 Konan Minato-ku, Tokyo, 108-0075, Japan Remarks Date: April 11, 2023 SGS-CSTC Standards Technical Services Suzhou Co., Ltd. South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China, 215000

(Jiangsu) Pilot Free Trade Zone Authorization Letter for SGS FCC ID: PY7-35141E To Whom It May Concern:

I, the undersigned, hereby authorize SGS to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by SGS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS as our representative, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

c) make claims regarding certification only in respect of the scope for which certification has been granted;

d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use. Sony Corporation 1-7-1 Konan Minato-ku, Tokyo, 108-0075, Japan Remarks f) use certification only to indicate the products are certified as being in conformity with specified standards;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

i) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;

j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. Yours sincerely, ________________________________ Mika Kaneko Chief Regulatory Compliance Manager Mobile Communications Business Group Sony Corporation It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6477323.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Sony Corporation 1-7-1 Konan Minato-ku, Tokyo, 108-0075, Japan Remarks Date: April 11, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Confidentiality Request Letter FCC ID: PY7-35141E To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely.

- Schematic Diagram

- Block Diagram

- Theory of Operation

- Parts List

- Tune up Information Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 180days from date of the Grant of Equipment Authorization.

- External Photos Internal Photos

- Test Setup Photos

- User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Yours sincerely, ________________________________ Mika Kaneko Chief Regulatory Compliance Manager Mobile Communications Business Group Sony Corporation It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6477324.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Sony Corporation Date: April 11, 2023 FCC ID: PY7-35141E CFR 47 2.903 and 2.911 (d)(5) Attestation To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. Sony Corporation (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Sony Corporation (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Mika Kaneko Chief Regulatory Compliance Manager Sony Corporation