FCC ID: PY7-61863J GSM/WCDMA/LTE Phone with BT, DTS/UNIIa/b/g/n/ac, NFC and GNSS

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5759715.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

(Web) Xperia XXXXXX XQ-CC44 Startup guide Legal information This Startup guide is published by Sony Corporation or its local aliated company, without any warranty. Improvements and changes to this Startup guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Corporation at any time and without notice. Such changes will, however, be incorporated into new editions of this Startup guide. All illustrations are for illustration only and may not accurately depict the actual device. All product and company names mentioned herein are the trademarks or registered trademarks of their respective owners. Any rights not expressly granted herein are reserved. Visit https://www.xperiainfo.com/

for more information. To view the regulatory compliance mark Find and tap Settings > About phone > Certicates. A regulatory compliance mark such as an FCC ID is displayed on the screen. 2022 Sony Corporation F-412-100-01(1) Copyright 2022 Sony Corporation

(Web) Xperia XXXXXX XQ-CC44 Radio Wave Exposure and Specic Absorption Rate (SAR) Information Radio Frequency (RF) exposure and Specic Absorption Rate (SAR) When the phone or Bluetooth handsfree is turned on, it emits low levels of radio frequency energy. International safety guidelines have been developed through periodic and thorough evaluation of scientic studies. These guidelines establish permitted levels of radio wave exposure. The guidelines include a safety margin designed to assure the safety of all persons and to account for any variations in measurements. Specic Absorption Rate (SAR) is used to measure radio frequency energy absorbed by the body when using a mobile phone. The SAR value is determined at the highest certied power level in laboratory conditions, but because the phone is designed to use the minimum power necessary to access the chosen network, the actual SAR level can be well below this value. There is no proof of dierence in safety based on dierence in SAR value. Products with radio transmitters sold in the US must be certied by the Federal Communications Commission

(FCC). When required, tests are performed when the phone is placed at the ear and when worn on the body. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines. Please use an accessory designated for this product or an accessory which contains no metal and which positions the handset a minimum of 1.0 cm from the body. For more information about SAR and radio frequency exposure, go to: https://xperia.sony.jp/product/SAR/

Important Information United States THIS PHONE MODEL HAS BEEN CERTIFIED IN COMPLIANCE WITH THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. This mobile phone model XQ-CC44 has been designed to comply with applicable safety requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed to not exceed the limits* of exposure to radio frequency (RF) energy set by governmental authorities. These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by international scientic organizations through periodic and thorough evaluation of scientic studies. The standards include a safety margin designed to assure the safety of all individuals, regardless of age and health. The radio wave exposure guidelines employ a unit of measurement known as the Specic Absorption Rate (SAR). Tests for SAR are conducted using standardized methods with the phone transmitting at its highest certied power level in all used frequency bands. While there may be dierences between the SAR levels of various phone models, they are all designed to meet the relevant guidelines for exposure to radio waves. The highest SAR value as reported to the authorities for this phone model when tested for use by the ear is 0.55 W/kg*, when worn on the body is 0.78 W/kg* and when WiFi hotspot mode is 0.78 W/kg. For body-

worn operation, this phone has been tested and meets the FCC RF exposure guidelines. Please use an accessory designated for this product or an accessory which contains no metal and which positions the handset a minimum of 10 mm from the body. For devices which include "WiFi hotspot" functionality, SAR measurements for the device operating in WiFi hotspot mode were taken using a separation distance of 10 mm. Use of third-party accessories may result in dierent SAR levels than those reported.

** Before a phone model is available for sale to the public in the US, it must be tested and certied by the Federal Communications Commission (FCC) that it does not exceed the limit established by the government-

adopted requirement for safe exposure*. The tests are performed in positions and locations (i.e., by the ear and worn on the body) as required by the FCC for each model. The FCC has granted an Equipment Authorization for this phone model with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. While there may be dierences between the SAR levels of various phones, all mobile phones granted an FCC equipment authorization meet the government requirement for safe exposure. SAR information on this phone model is on le at the FCC and can be found under the Display Grant section of https://www.fcc.gov/oet/ea/fccid after searching on FCC ID PY7-61863J. Additional SAR-related information can also be found on the Mobile and Wireless Forum at https://www.mwfai.org/.

* In the United States, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a margin of safety to give additional protection for the public and to account for any variations in measurements.

** This paragraph is only applicable to authorities and customers in the United States. F-412-100-01(1) Copyright 2022 Sony Corporation

(Web) Xperia XXXXXX XQ-CC44 FCC Statement for the USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modication not expressly approved by Sony may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. F-412-100-01(1) Copyright 2022 Sony Corporation

Remarks Sony Corporation 1-7-1 Konan Minato-ku, Tokyo, 108-0075, Japan Date: March 9, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Class II Permissive Change Request Letter FCC ID: PY7-61863J To whom it may concern, This is to request a Class II Permissive Change for FCC ID: PY7-61863J. The major changes filed under this application is:

Enable three bands by Software,please refer to Theory of operation for the detail. If you have any questions, please feel free to contact us Yours sincerely, ________________________________ Tomonori Nagano Head of Product Safety, Quality Assurance Quality Assurance & Customer Services Mobile Communications Business Group Sony Corporation It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.

Remarks Sony Corporation 1-7-1 Konan Minato-ku, Tokyo, 108-0075, Japan Date: March 9, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC ID: PY7-61863J To Whom It May Concern:

Confidentiality Request Letter Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely.

- Block Diagram

- Theory of Operation

- Antenna Specification

- Tune up Information Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 180days from date of the Grant of Equipment Authorization.

- Test Setup Photos

- User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Yours sincerely, ________________________________ Tomonori Nagano Head of Product Safety, Quality Assurance Quality Assurance & Customer Services Mobile Communications Business Group Sony Corporation It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be removed from possible use.