|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7 8
|
Effective |
2024-05-07
|
|
1 2 3 4 5 6 7 8
|
Applicant's complete, legal business name |
Sony Corporation
|
|
1 2 3 4 5 6 7 8
|
FCC Registration Number (FRN) |
0018919456
|
|
1 2 3 4 5 6 7 8
|
Physical Address |
1-7-1 Konan, Minato-ku
|
|
1 2 3 4 5 6 7 8
|
Tokyo, N/A 108-0075
|
|
1 2 3 4 5 6 7 8
|
Japan
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7 8
|
TCB Application Email Address |
h******@acbcert.com
|
|
1 2 3 4 5 6 7 8
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5 6 7 8
|
B4: Microwave, Millimeter Wave Band and Citizens Broadband Radio Services equipment in 47 CFR Parts 25, 30, 74, 90, 95, 96, 97, 101 (all above 3 GHz)
|
|
1 2 3 4 5 6 7 8
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
1 2 3 4 5 6 7 8
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
1 2 3 4 5 6 7 8
|
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7 8
|
Grantee Code |
PY7
|
|
1 2 3 4 5 6 7 8
|
Equipment Product Code |
46195Y
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7 8
|
Name |
K**** H********
|
|
1 2 3 4 5 6 7 8
|
Title |
Senior EMC/RF Compliance Manager
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
+8150********
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
+8150********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
K******@sony.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5 6 7 8
|
Firm Name |
Sony Corporation
|
|
1 2 3 4 5 6 7 8
|
Name |
M**** K********
|
|
1 2 3 4 5 6 7 8
|
Physical Address |
1-7-1 Konan Minato-ku
|
|
1 2 3 4 5 6 7 8
|
Tokyo, 108-0075
|
|
1 2 3 4 5 6 7 8
|
Japan
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
+81 5********
|
|
1 2 3 4 5 6 7 8
|
+81********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
M******@sony.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 8 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 8 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/03/2024 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 8 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 8 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 8 | 5GM - Part 30 Mobile Transmitter |
| 1 2 3 4 5 6 7 8 | 6XD - 15E 6 GHz Low Power Indoor Client |
| 1 2 3 4 5 6 7 8 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 7 8 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 8 | CXX - Communications Rcvr for use w/ licensed Tx and CBs |
| 1 2 3 4 5 6 7 8 | PCB - PCS Licensed Transmitter |
| 1 2 3 4 5 6 7 8 | CBE - Citizens Band End User Devices |
| 1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Portable Device |
| 1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 3 4 5 6 7 8 | Modular Equipment Type | Does not apply |
| 1 2 3 4 5 6 7 8 | Purpose / Application is for | Original Equipment |
| 1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 8 | Grant Comments | Output Power listed is conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for product specific (Body), simultaneous transmission and product specific (extremity) use conditions is <0.10 W/kg, 1.52 W/kg, and 0.92 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 | Output power listed is EIRP. RF Exposure compliance for body-worn operations is limited to the specific configurations tested for this filing. Body operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
Certification for 3GPP 5G NR band n258 operations is limited to the 24.25-24.45 GHz and 24.75-25.25 GHz segments under Section 30.4(a). This device supports bandwidths from 50 to 100 MHz per Carrier for 5G NR bands n261/n260/n258 with up to 4CC. |
| 1 2 3 4 5 6 7 8 | Power Output listed is maximum composite EIRP. RF Exposure compliance for body-worn operations is limited to the specific configurations tested for this filing. Body operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for product specific (Body), simultaneous transmission and product specific (extremity) use conditions is 0.11W/kg, 1.52 W/kg, and 0.92 W/kg, respectively.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. SISO mode is not supported. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
| 1 2 3 4 5 6 7 8 | Output Power listed is conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for product specific (Body), simultaneous transmission and product specific (extremity) use conditions is 0.13 W/kg, 1.52 W/kg, and 0.92 W/kg, respectively.
This transmitter has 20MHz, 40MHz, 80MHz, and 160 MHz bandwidth modes as described in the filing. This device operates as a client only, and contains a 2 x 2 MIMO configuration enabled for either 2.4 or 5 GHz band operations as described in the filing. |
| 1 2 3 4 5 6 7 8 | Output Power listed is conducted. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for product specific (Body), simultaneous transmission and product specific (extremity) use conditions is 0.34 W/kg, 1.52 W/kg, and 0.92 W/kg, respectively.
This device operates as a client only, and contains a 2 x 2 MIMO configuration enabled for either 2.4 or 5 GHz band operations as described in the filing. SISO operation is not supported for 2.4 GHz WIFI Operations. |
| 1 2 3 4 5 6 7 8 | Output power listed is ERP for operation below 1 GHz in Parts 22 and 27, and EIRP for operation above 1 GHz in Parts 24 and 27. SAR compliance for body operations is limited to the specific configurations tested for this filing. Body operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for product specific (Body), simultaneous transmission and product specific (extremity) use conditions is 1.05 W/kg, 1.52 W/kg, and 0.92 W/kg, respectively.
This device also contains functions that are not operational in US Territories. This filing is only applicable for US operations.
Certification for 3GPP 5G NR band n77 operations is limited to the 3.7 GHz segment under §27.5(m) and the 3.5 GHz segment under §27.5(o).
Device supports a 2 x 2 MIMO configuration, enabled for 5G NR n41 and n77 operations as described in this filing. |
| 1 2 3 4 5 6 7 8 | Output power listed is EIRP. SAR compliance for body-worn operations is limited to the specific configurations tested for this filing. Body operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for product specific (Body), simultaneous transmission and product specific (extremity) use conditions is 1.10 W/kg, 1.52 W/kg, and 0.92 W/kg, respectively.
Device supports a 2 x 2 MIMO configuration, enabled for 5G NR n48 operations as described in this filing. |
| 1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7 8
|
Firm Name |
RF Safety Laboratory, LLC
|
|
1 2 3 4 5 6 7 8
|
Name |
S******** L********
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
202-2********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
S******@rfsafetylab.com
|
|