FCC ID: QVA-SORADIO Connect Radio Module (BLE-LoRa)

SORADIO SORADIO Installation instructions - Pages 2-15 EN 529 VISTA BLVD 89434 SPARKS, NV - USA Toll Free: 1-800-498-9662 / Phone: (775) 856-7333 / Fax: (775) 856-7658 Website: www.protechusa.com E-mail: sales@protechusa.com PROTECH SORADIO SORADIO PROTECH CONTENTS 1 WIRING ............................................................................................................. 2 2 SMARTPHONE APPLICATION ........................................................................ 3 2.1 Settings .............................................................................................................................. 4 Input status ........................................................................................................................ 4 2.2 2.3 Input settings ..................................................................................................................... 5 2.4 User settings ...................................................................................................................... 5 2.5 Event log ............................................................................................................................ 7 2.6 Network settings ................................................................................................................ 8 3 RADIO CONFIGURATION ................................................................................ 9 3.1 Configuration using the CONNECT RADIO COORDINATOR ........................................... 9 3.2 Activate the radio on the SORADIO ................................................................................. 11 4 MAINTENANCE .............................................................................................. 12 5 TECHNICAL SPECIFICATIONS ..................................................................... 12 6 PRODUCT REFERENCES .............................................................................. 13 1 SORADIO PROTECH 1 WIRING Note: All common inputs are connected together.

2 L 1 L 3 L N Terminals 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Description Input 1 Common Input 2 Common Input 3 Common Input 4 Common Input 5 Common Input 6 Common Input 7 Common Input 8 Common X X X X 0V Power supply

+12V DC Power supply C Example of input wiring:

The inputs are seen out of alarm when they are closed. They are seen in alarm when they are open

(Positive security).

* LEDs status L1, L2 et L3:

Operating mode L1: green E1 L2: orange Radio configuration status BLE status L3: red OFF: Radio Mode ON: RS485 Mode (unused in SORADIO) Blinking: Radio mode not configured ON: Radio mode configured OFF: BLE deactivated Blinking: BLE active waiting for connection ON: BLE active connected to the application LEDs active only if BLE is activated after a short press on the tamper Wire Wire section 0.6 mm 0.9 mm 1.4 mm 0.02 in 0.04 in 0.06 in 0.3 mm 0.6 mm 1.5 mm 23 AWG 20 AWG 16 AWG Maximum length of cables 0.31 mi 0.7 mi 1.56 mi 500 m 1124 m 2506 m Note: When using the same cable to supply power to several components, the indicated distances should be divided by the number of connected components. When using several wires with the same section in parallel by polarity, the indicated distances should be multiplied by the number of connected wires. 2 Maximum length of 12V DC power supply cables:

(cable type SYT1 shielded) PROTECH 2 SMARTPHONE APPLICATION Note: The smartphone application is compatible from Android 4.1 or higher. 1. Download the smartphone application Sorhea Connect. SORADIO Sorhea Connect 2. Launch application Sorhea Connect. Authorize activation of Bluetooth if requested to do so by the application. 3. Press the tamper switch very briefly (1s) to activate the BLE connection of the SORADIO. Note: the connection remains active as long as the SORADIO is connected to the smartphone application. It is deactivated when the cover is closed (tamper closed) or after 1 minute of inactivity (application closed). Tamper SORADIO 4. Launch the search. 3 SORADIO 5. Click on the product found. SORADIO found Radio ID of the SORADIO found identical to the sticker on the card. PROTECH 2.1 Settings 2.2 Input status Setting the time on the module Enter the module name:

Click on the name to change and Save Real-time input status Legend:

No alarm Alarm Inactive Note: It is possible to customize the name of an input. Click on the name to change and Save. 4 SORADIO PROTECH 2.3 Input settings Each input can be:

Enable / disable input. Eject input. To apply the changes, click Save. Select Input disable input Eject input Not used Enable input Eject input Input disabled Input not ejected Input enabled Input ejected Note: It is only possible to eject an input if it is enable. Input disable = Relay associated forced in alarm Input ejected = Relay associated forced out alarm. 2.4 User settings Managing user settings allows saving settings or applying settings to inputs: name and status of inputs (activated, ejected). 2.4.1 Saving user configuration Enter the name of the backup file Select Save configuration Click SAVE 5 SORADIO Select the settings to load Click on Apply configuration By default, the application offers the following setting options:

PROTECH 2.4.2 Applying an existing user setting SO-BEAM S RX (FR) SO-BEAM M/L/XL Mixed (FR) SO-BEAM M/L/XL TX (FR) SO-BEAM M/L/XL RX (FR) SO-BEAM M/L/XL TX (EN) SO-BEAM S RX (EN) SO-BEAM M/L/XL RX (EN) SO-BEAM M/L/XL Mixed (EN) MIRIS 3000/3100 CONNECT Sigle Direction (FR) MIRIS 3000/3100 CONNECT Double Direction (FR) COLIRIS II CONNECT Sigle Direction (FR) COLIRIS II CONNECT Double Direction (FR) MIRIS 3000/3100 CONNECT Sigle Direction (EN) MIRIS 3000/3100 CONNECT Double Direction (EN) COLIRIS II CONNECT Double Direction (EN) COLIRIS II CONNECT Sigle Direction (EN) 8 INPUTS REMOTE MODULE default settings 6 SORADIO PROTECH 2.5 Event log 1. Click on Menu Menu 2. Click on Event log Event log 3. View event log Date/Time of the event Type of events Input name List of events:

Alarm End Alarm Eject End eject BLE Connection Configuration Time setting Reset log event Power on 7 SORADIO PROTECH 2.6 Network settings 1. Click on Menu Menu 2. Click Network settings Network Settings 8 Indication that radio is active The black point "" indicates that the SORADIO has no assigned channel.

(configuration via coordinator not done) Default parameter unused in SORADIO PROTECH 3 RADIO CONFIGURATION 3.1 Configuration using the CONNECT RADIO COORDINATOR SORADIO 1. Enable radio, see 3.2.Activate the radio on the SORADIO. Note: By default, the radio is disabled. 2. Refer to manual CONNECT RADIO COORDINATOR NT400 to start radio search. 3. SORADIO settings and status from UNIVERSAL MAXIBUS B D A. Product Name: Possibility to customize the name of the connected product. Change the name and click SAVE. B. Reading network address RS485 (unused in SORADIO). C. Input management:

For each input, it is possible to:

Customize the name of the input. Enable / disable input. To apply changes, click on SAVE. Input ejection. Enable input Eject input Input enabled Input not ejected Input disabled Input ejected 9 A C SORADIO PROTECH D. Note: It is only possible to eject an input if it is enable. Input disable = Relay associated forced in alarm Input ejected = Relay associated forced out alarm. E. Input State

(Note: status not available in radio mode) No alarm Alarm Disable 4. SORADIO Event log 10 List of "Events" available in event log:

Input Date Start alarm End alarm Eject End eject Events ID Radio : Network address ID Radio time setting Power on Change configuration Reset event log PROTECH 3.2 Activate the radio on the SORADIO Note: radio activation allows resetting the radio configuration on the SORADIO and switching to radio search (wait for pairing with the CONNECT RADIO COORDINATOR) SORADIO 1. Disconnect the power supply on the SORADIO 2. Press the button and switch on the SORADIO 3. Hold the button until the orange LED L2 lights.

( 5s, The green led L1 lights up during the procedure). 1 L 2 L 3 L 11 PROTECH 4 MAINTENANCE SORADIO Failure Probable causes Solutions Permanent alarm

Input disabled

- Non-wired entry

- Activate input.

- Check wiring. Never alarm

Input ejected

- Remove ejection from input The smartphone application does not detect the SORADIO

- The BLE connection of the 8

- Press the tamper for at least 1 INPUTS REMOTE MODULE is not activated. second. (see 3) 5 TECHNICAL SPECIFICATIONS Power supply Consumption Operating temperature Relative humidity Protection index Weight Electromagnetic compatibility Range 4.5V to 30V DC 10mA

-35C to +70C / -31F to 158F 95% max. non-condensing IP65 0.3Kg / 0.66 lb Compliance with European standards (label CE) Mesh network allowing messages to be relayed from MI8 to MI8:

400m / 0.25 mile point to point and in free field 12 PROTECH 6 PRODUCT REFERENCES SORADIO SORADIO ref: 30790001 Option:

Pole mount bracket set 76 Pole mount bracket set 101 Bracket set for mounting on 100x50 pole or frame 3100 SF Bracket set for mounting on frame 3100 DF ref: 30793001 ref: 30793002 ref: 30793003 ref: 30793004 Changes or modifications not expressly approved by PROTECH / SORHEA could void the users authority to operate the equipment. FCC Part 15 compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This module has been approved under FCC part 15C 15.247. This modular transmitter is only FCC authorized for this specific rule part. - The module is limited to PROTECH / SORHEA installation only. The host product should be check for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. (For example, Part 15 Subpart B). If testing of the host product with this transmitter installed and operating is necessary (to verify that the host product meets all the applicable FCC rules), a test mode for this specific module is available upon request to SORHEA. Trace antenna design, list of antenna type approved and professional installation is not applicable to this modular certification. ISED (Canada) Licence-Exempt Radio Apparatus This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. 13 PROTECH ISDE (Canada) appareils radio exempts de licence Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

SORADIO 1. Lappareil ne doit pas produire de brouillage ;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Radio Frequency (RF) Exposure Compliance of Radiocommunication for mobile Apparatus To satisfy FCC and IC RF Exposure requirements for mobile devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Conformit lexposition aux champs RF des quipements radio mobiles Pour satisfaire aux exigences FCC et IC concernant l'exposition aux champs RF pour les appareils mobile, une distance de sparation de 20 cm ou plus doit tre maintenu entre l'antenne de ce dispositif et les personnes pendant le fonctionnement. Pour assurer la conformit, il est dconseill d'utiliser cet quipement une distance infrieure. Cet metteur ne doit pas tre co-situ ou fonctionner conjointement avec une autre antenne ou un autre metteur. Host Product Labeling:

FCC Certification:

The final end product must be labeled in visible area with the following:

Contains Transmitter Module FCC ID: QVA-SORADIO ISED Certification:

The final end product must be labeled in visible area with the following:

Lquipement final doit tre tiquet sur un endroit visible avec le texte suivant :

Contains IC: 11664A-SORADIO Host Product Users Manual:

The user manual for end users must include the following information in a prominent location IMPORTANT NOTE: To comply with FCC and ISED RF exposure compliance requirements, the antenna used for this transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. The equipment should be installed and operated with a minimum distance of 20cm between the radiator and the body. Notice importante : Pour satisfaire aux exigences FCC et ISED concernant l'exposition aux champs RF pour les appareils mobile, cet metteur ne doit pas tre co-situ ou fonctionner conjointement avec une autre antenne ou un autre metteur. Une distance de sparation de 20 cm ou plus doit tre maintenu entre l'antenne de ce dispositif et les personnes pendant le fonctionnement. 14

1SDAHEA __/

., ............... ....... .......... Authority to Act as Agent Date: November 27th, 2020 Body, Inc. Certification American 6731 Whittier Suite C110 Mclean, VA 22101 Avenue To Whom lt May Concern:

SMEE (Mr. Laurent Chapus, 385 Rue Ren Rambaud, F-38500 Voiron, France) is authorized notified, for applications until otherwise Certification to act on our behalf, Body, Inc. (ACB). to American We certify that we are not subject to de niai of federal benefits, pursuant to Section party, as defined in 47 CFR 1.2002 (b), to the applicatio benefits, FCC benefits. that includes n is subject 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no to denial of federal that includes FCC benefits, We also declare that the of our knowledge (47 CFR responsibilities (47 CFR 2. 2.911(d)) and we have been informed of 909) with regard to certified equipment. the grantee information provided to the FCC is t rue and correct to the best Thank you, __ Mr. Aymeric

(Print

CARADEC name) Title: __ Technical Department Manager _____ _ of:

On behalf SORHEA 1 rue du Dauphin VAULX-EN-VELIN F-69120 a.carade c@sorhea.fr Phone: +33(0)4 78 03 06 10

(France) 1 rue du Dauphin -F-69120 VAULX-E -VE IN Tl. : +33(0)4 78 03 06 10 Fitx : +33(0)4 78 68 24 61 Email: courrier@sorhea.fr

$ , OIP'tI ,<QO 817 609 000}) Af>E 2 )OZ n A I tncon " fR 000 C li.CS L )I Il 7 0 , SIRET l4 l 73 lI 817 609

-1 SDAHEA _/

. .. , ............ o 011

.. ......... 011110111111 Reguest for Confidentiality 27tl1 Date: November Subject:

, 2020 Confidentiality Request for FCC ID: QV A-SORADIO IC: l 1664A-SORADIO Pursuant the subject FCC application be held confidential. to FCC 4 7 CFR 0.457( d) and 0.459 and IC RSP-100, Section 2.4, the applicant requests that a part of Requested Type of Confidentiality D Short Term [8] Permanent D Short Term D Short Term D ShortTerm D ShortTerm D Short Term D Short Term D ShortTerm D ShortTerm D Permanent*

[8] Permanent D Permanent D Permanent

[8] Permanent Exhibit Block Diagrams External Photos Internai Photos Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos User's D Permanent*

Manual 3 1 of Operation Description/Theory effort in developing SORHEA has spent substantial H aving the subject available easily information by developing Not protecting this product. to "competition"

of the design and it is one of the first of its kind in industry. would negate achieved will result the advantage in financial hardship. they have this product the details Confidentiality:

Permanent The applicant review public. requests the exhibits that contain listed trade secrets due to materials above as permanently confidential be permanently not customarily withheld from public to the released and proprietary information selected of (specify the exhibits number of days not to exceed Confidentiality:

requests Short-Term The applicant period Authorization marketing in the event information regarding period Public and prior to marketing. of the product to the public. the product has expired. Notice ACB will then release DA 04-1705. or release above as short term confidential be withheld from public view for a This is to avoid premature 180)2_ days from release the date of the Grant ofEquipment prior to information of sensitive Applicant or the product is also aware that is made available above for public they are responsible to notify ACB to the public before the requested to FCC pursuant disclosure the documents listed NOTE for Industry IC currently not considered only distinguishes Permanent to IC applications. exhibits Confidentiality applicable Canada Applications:

as shown above. Short Term confidentiality is Sincerely, By:

C---J'-j

(S ignature/

Titie3) Department Manager Technical _ _ _ __ Aymeric CARADEC _ __ __ _

(Print name) SORHEA 1 rue du Dauphin F-69120 V AULX-EN-VELIN

-France

(*) require further information to be provided to ACB before permanent confidentiality will be 1 The asterisked items to these exhibits. Please extended https://apps.fcc regarding

-Please details. complete 2

.gov/oetcf/kdb/

information forms/F that must accompany TSSearchResultPage these requests. cfm?switch specific refer to F CC KDB 726920 and the specific Document

=P&id=4173 l and review link for DO 1 found at:

section II, 3) refer to http://acbcert.com/docum ents/misc-docs/Memo-

d-Confiden Short-Term-Vs-Standar tiality.pdf for 1 rue du Dauphin -F-69120 VAULX-E -VELIN Tl. : 33(0)4 78 03 06 10 Fax : +33(0)4 78 68 24 61 S.A p,1 1 d ,oo 000 C. li.CS L1on 341 8 7 609. SIRET 3 817 609 00033 .,,_PE l!>lOZ

., A l<>,r o 73 JI 817 609

, r FR Email: courrier@sorhea.fr

Request for Modular/Limited Modular Approval Date: June 2, 2021 Subject: Manufacturers Declaration for - Modular Approval Confidentiality Request for: ___________

- Limited Modular Approval - Limited Split Modular Approval

- Split Modular Approval 8 Basic Requirements FCC Part 15.212(a)(1) For Items Marked NO(*), the Limited Module Description Must be Filled Out on the Following Pages Modular Approval Requirement 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with FCC limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. The physical crystal and tuning capacitors may be located external to the shielded radio elements. 15.212(a)(1)(i) Details: The module contains a metal shield which covers all RF components and circuitry. The shield is located on the top of the board next to antenna.

- YES - NO(*) Requirement Met 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with FCC requirements under conditions of excessive data rates or over-modulation. 15.212(a)(1)(ii) Details: No modulation / data inputs 3. The modular transmitter must have its own power supply regulation on the module. This is intended to ensure that the module will comply with FCC requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. 15.212(a)(1)(iii) Details: Voltage regulators on module or inside MCU and RF integrated circuit. 4. The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b), 15.204(c), 15.212(a), and 2.929(b). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph 15.212(b). 15.212(a)(1)(iv) Details: The module has its own antenna soldered on the PCB 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). 15.212(a)(1)(v) Details: The module was tested stand-alone as shown in test setup photographs filed with this application

- YES - NO(*)

- YES - NO(*)

- YES - NO(*)

- YES - NO(*) Modular Approval Requirement 6. The modular transmitter must be labeled with its own FCC ID number, or use an electron display Requirement Met

(see KDB Publication 784748). If using a permanently affixed label with its own FCC ID number, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: XYZMODEL1 or Contains FCC ID: XYZMODEL1. Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains FCC certified transmitter module(s). Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 15.212(a)(1)(vi) Details: There is a label on the module as shown in the labeling exhibit filed with this application. Host specific labeling instructions are shown in the installation manual filed with this application.

- YES - NO(*) 7. The modular transmitter must comply with all specific rule or operating requirements applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. 15.212(a)(1)(vii) Details: The module complies with FCC Part 15C requirements. Instructions to the OEM installer are provided in the installation manual filed with this application.

- YES - NO(*) 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. 15.212(a)(1)(viii) Details: The module meets mobile exclusion levels as shown in the RF exposure information filed with this application.

- YES - NO(*) Limited Module Description When Applicable

* If a module does NOT meet one or more of the above 8 requirements, the applicant may request Limited Modular Approval (LMA). This Limited Modular Approval (LMA) is applied with the understanding that the applicant will demonstrate and will retain control over the final installation of the device, such that compliance of the end product is always assured. The operating condition(s) for the LMA; the module is only approved for use when installed in devices produced by grantee. A description regarding how control of the end product, into which the module will be installed, will be maintained by the applicant/manufacturer, such that full compliance of the end product is always ensured should be provided here. Details: N/A Software Considerations KDB 594280 / KDB 442812 (One of the following 2 items must be applied) Requirement Requirement Met 1. For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description must be provided about how such control is implemented to ensure prevention of third-party modification; see KDB Publication 594280. Details: The firmware of the device can not be modified or adjusted by the end user. 2. For Software Defined Radio (SDR) devices, transmitter module applications must provide a software security description; see KDB Publication 442812. Details: <example N/A>

- Provided in Separate Cover Letter

- N/A

- Provided in Separate Cover Letter

- N/A Split Modular Requirements Requirement Provided in Manual 1. For split modular transmitters, specific descriptions for secure communications between front-end and control sections, including authentication and restrictions on third-party modifications; also, instructions to third-party integrators on how control is maintained. Details: <example N/A >

- Provided in Separate Cover Letter

- N/A OEM Integration Manual Guidance KDB 996369 D03 Section 2 Clear and Specific Instructions Describing the Conditions, Limitations, and Procedures for third-parties to use and/or integrate the module into a host device. Requirement Is this module intended for sale to third parties?

- YES

- No, If No, and LMA applies, the applicant can optionally choose to not make the following detailed info public. However there still needs to be basic integration instructions for a users manual and the information below must still be included in the operational description. If the applicant wishes to keep this info confidential, this will require a separate statement cover letter explaining the module is not for sale to third parties and that integration instructions are internal confidential documents. Items required to be in the manual See KDB 996369 D03, Section 2 As of May 1, 2019, the FCC requires ALL the following information to be in the installation manual. Modular transmitter applicants should include information in their instructions for all these items indicating clearly when they are not applicable. For example information on trace antenna design could indicate Not Applicable. Also if a module is limited to only a grantees own products and not intended for sale to third parties, the user instructions may not need to be detailed and the following items can be placed in the operational description, but this should include a cover letter as cited above. 1. List of applicable FCC rules. KDB 996369 D03, Section 2.2 a. Only list rules related to the transmitter. 2. Summarize the specific operational use conditions. KDB 996369 D03, Section 2.3 a. Conditions such as limits on antennas, cable loss, reduction of power for point to point 3. Limited Module Procedures. KDB 996369 D03, Section 2.4 systems, professional installation info a. Describe alternative means that the grantee uses to verify the host meets the necessary limiting conditions b. When RF exposure evaluation is necessary, state how control will be maintained such that compliance is ensured, such as Class II for new hosts, etc. 4. Trace antenna designs. KDB 996369 D03, Section 2.5 a. Layout of trace design, parts list, antenna, connectors, isolation requirements, tests for design verification, and production test procedures for ensuring compliance. If confidential, the method used to keep confidential must be identified and information provided in the operational description. 5. RF exposure considerations. KDB 996369 D03, Section 2.6 a. Clearly and explicitly state conditions that allow host manufacturers to use the module. Two types of instructions are necessary: first to the host manufacturer to define conditions (mobile, portable xx cm from body) and second additional text needed to be provided to the end user in the host product manuals. 6. Antennas. KDB 996369 D03, Section 2.7 a. List of antennas included in the application and all applicable professional installer instructions when applicable. The antenna list shall also identify the antenna types

(monopole, PIFA, dipole, etc note that omni-directional is not considered a type) 7. Label and compliance information. KDB 996369 D03, Section 2.8 a. Advice to host integrators that they need to provide a physical or e-label stating Contains FCC ID: with their finished product 8. Information on test modes and additional testing requirements. KDB 996369 D03, Section 2.9 a. Test modes that should be taken into consideration by host integrators including clarifications necessary for stand-alone and simultaneous configurations. b. Provide information on how to configure test modes for evaluation 9. Additional testing, Part 15 Subpart B disclaimer. KDB 996369 D03, Section 2.10

- All Items shown to the left are provided in the Modular Integration Guide (or UM) for Full Modular Approval

(MA) or LMA.

- An LMA applies and is approved ONLY for use by the grantee in their own products, and not intended for sale to 3rd parties as provided in a separate cover letter. Therefore the information shown to the left is found in the theory of operation. Filled by:

Laurent CHAPUS (Agent for this device) SMEE 385, Rue Ren Rambaud ZA Le Parvis 2 38500 Voiron - France laurent.chapus@smee.fr FCC Registration Number: 0020356952 (FRN) Applicant for this device:

SORHEA 1 rue du Dauphin F-69120 VAULX-EN-VELIN Aymeric CARADEC Technical Department Manager a.caradec@sorhea.fr

+33(0)4 78 03 06 10