Contents Safety Instructions Safety Instructions Caution System Connection Front Panel Functions Rear Panel Functions Remote Functions System Setup Bluetooth Operation/USB Copy Common Operation Radio Station/ Audio Input Operation Troubleshooting Specications 2 3 4 5 6 7 8-11 12 13-15 16 17 18 Please read the user and maintenance guide carefully and keep it in a safe place for future reference. To avoid the risk of electric shock, do not disassemble the enclosure. Refer all servicing to qualied service personnel. Class I Laser Product Only use in altitudes below 5,000m. Power Supply Operate only from the power source specied on the unit. Ventilation The ventilation holes in the shell of the unit are designed for heat dissipation to prevent the unit from overheating. The holes should not be blocked or covered and do not place the unit on a bed or sofa. Heat Sources Do not place the unit near heat sources such as a boiler, electric furnace etc. Avoid direct sunlight. Water and Moisture Never use the unit in areas like the bathroom, kitchen or any area where it may be exposed to water. Please do not place a vessel containing liquid on the unit. Foreign Matters Please do not insert foreign matters like metal articles etc. into the unit. Cleaning Please unplug the power plug before cleaning. Do not use a solution with corrosive substances, volatile solution or spray cleaning agents to clean the unit. Use a soft and damp cloth to clean . Power Cable When plugging or unplugging the power cable, please hold the plug tightly, and do not pull the cable. If the unit is not used for a long time or in use during a thunderstorm , please immediately unplug it from the socket. Disc Door When the disc door closes, keep ngers away from the door in order to avoid injury or damage to the unit. Loading of Weight To avoid damage, do not place heavy articles on the unit or step on it. Connection with Other Equipment When connecting other equipment, ensure that the power plug of each unit is unplugged. Otherwise, there may be risk of damage to equipment and/or personal injury. Laser When the cover is opened and the unit is working, do not look directly at the laser so as to avoid damage to one's eyesight. Discs Do not use broken, deformed or amended discs, otherwise the unit will operate faulty and the service life will be shortened. Maintenance Service for the Faults If any one of the following situations arise, please unplug the unit and contact qualied maintenance personnel:
A.When the power wire or plug is damaged. B. When liquid or foreign matter has fallen into the unit. C. When the unit has been exposed to water or rain. D. When the unit doesn't work normally in accordance with the operating instructions. Please do not adjust any control buttons not stipulated in the instructions as this can cause damage to the unit. E. When the unit falls from a high place or is damaged due to other reasons. F. When smoke is emitted from the unit. Maintenance Please do not try to maintain or repair the unit yourself . Please contact qualied maintenance personnel. Replacement of Components When a component needs to be replaced, please ask the maintenance personnel to replace the component from the same model. A component from a dierent model may cause further damage, electric shock or decrease the service life of the unit. Safety Check After the completion of the maintenance, ask the maintenance personnel to check the unit and ensure it's safety. 1 22 Caution Please Note:
1. When the unit is moved, please use the original paper box and packing materials and use the factory packing method to optimally protect the unit. 2. Do not place volatile liquids beside the unit, and do not allow rubber or plastic to make contact with the unit for extended periods of time as these products may mark the surface of the unit. 3. After the unit has been in use for a lengthy period of time, it may heat up on top and at the rear plate. This is normal. 4. When the unit is not used, please take out the disc, close the disc door and turn the power o. 5. If you have not used the unit for a long time and nd that certain function keys are not working, please refer the unit to qualied service personnel for maintenance. Location :
When your unit is placed near the TV, radio, or video tape recorder, poor image quality and sound distortion may occur. In that case, please relocate the unit away from such equipment. Cleaning:
1. Use a soft cloth to clean the unit. 2. Please use the cloth with a small amount of diluted cleaning agent to deal with dirty spots which are not easily cleaned. Do not use any solvents with corrosive substances like diluted, gasoline solvent, abrasive solution, etc. which will damage the surface of the unit. Warning: The cleaning and adjustment of internal parts should be conducted by trained authorised personnel. Discs:
1. How to take care of your discs: Do not touch the playing side of the disc. 2. How to clean your discs: Use a soft cloth to wipe the disc from the centre out. Fingerprints and dust remaining on the disc will aect the quality of the image and sound. When cleaning stubborn dirt, use a clean soft cloth dipped into a little water to wipe the disc, then use a dry soft cloth to dry it. Do not use solutions like methylbenzene, cleaning agents or antistatic spray to clean the disc. 3. How to store your discs: Do not place the discs in a place with heavy moisture, dust or direct sunlight. When the discs are not used, please place them in their boxes. Batteries:
Using the batteries incorrectly will cause leakage or corrosion of the battery uid. Please use the batteries in accordance with the following instructions:
1. Do not reverse the positive and negative polarity when the batteries are inserted. 2. Do not recharge non-rechargeable batteries, disassemble the batteries, make them short circuit or throw them into a re. 3. Do not mix dierent types of batteries or old and new batteries . 4. Do not keep damaged batteries in the remote. 5. If the remote is not used for a long time, please remove the batteries to avoid damage caused by the leaking of the battery uid. 6. If the remote is faulty or its eective scope is reduced, please replace with new batteries. 7. If the batteries have leaked battery uid, please dry the battery box and replace with new batteries. Remote Control:
Using the remote incorrectly will result in poor performance. Please use the remote in accordance with the following instructions:
1. The emitter of the remote should not be exposed to sunlight. 2. Please aim the remote at the reception window of the unit. 3. Do not drop the remote as it may get damaged. 4. Do not allow water or any other liquids to come into contact with the remote. 5. Do not disassemble the remote. Tips:
1.Correctly place the batteries inside the battery box of the remote. 2.The maximum reception distance between the remote and the unit is about 7m. 3.The maximum eective angle of the remote aligning at the reception window is 30. System Connection Description of Video Output Port:
Video Output Connect to the video terminal of the TV.
(yellow) Video connecting wire
(yellow) VIDEO IN TV Description of Chromatic Aberration Output:
Y/g C/b C/r or R.G..B Output Chromatic Aberration connecting wire included in the accessories
(red)
(white)
(yellow)
(Y/CR/CB terminal) cr
(red)
(red) cb
(cb) y
(white)
(yellow)
(green) TV The chromatic aberration output terminals provide Y, U, and V to have corresponding connection with the Y, U, and V input terminals of the TV. The Y, U, and V output images are more clear than the video image (set the video output mode in the setup menu as Y, U, and V, otherwise the image cannot be outputted). Please note: The chromatic aberration output terminals Y/g C/b C/r are the same as Y, U, and V. TV Audio Cable:
Connect the audio cable to the TV audio terminal. This wire is included in the accessories TV audio terminal
(red) R
(red) L
(white)
(white) TV Surround Speaker Connecting Guide:
Surround right speaker Surround left speaker Please note:
1. Do not short circuit the connections as this will cause damage to the system. 2. To connect correctly, connect red wire to +, and black wire to _. 3 4 Front Panel Functions Rear Panel Functions Remote Functions System Setup 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 1. Mute Button 2. Power Button 3. Number Button 4. GOTO (Time Selection) Button 5. FM Button 6. Function Button 7. Play/Pause Button 8. Return Button 9. Setup Button 10. Up Button 11. Enter/Radio Auto Search Button 12. Left Button 13. Down Button 14. Bass+ Button 15. Volume- Button 16. Bass- Button 17. Angle/Delete Button 18. Copy Button 19.P/N Button 20. Repeat Button 21. USB/DISC Switch Button 22. V-Mode Button 23. Open/Close Button 24. Last/FM- Button 25. Next/FM+ Button 26. Backward/Radio Frequency Trim- Button 27. Forward/Radio Frequency Trim+Button 28. Title/Record Button 29. Menu Button 30. Stop Button 31. Zoom Button 32. Right Button 33. Treb+ Button 34. Volume+ Button 35. Treb- Button 36. Subtitle Selection Button 37. Language Switch Button 38. Slow Button 39. DSP Button 40. OSD Button 41. Reset Button System Setup First press the Setup key on the remote control to enter the Setup menu. Then press Up, Down, Left or Right to highlight the option you want to adjust in the menu and press Enter to enter. To exit the Setup menu, press the Setup key. The setup operations are as follows:
I.TV System Enter the TV System option, press key to enter the sub-menu and select one of the following systems: NTSC, PAL or AUTO. TV Type Enter the TV Type option and press key to enter the sub-menu. There are three modes to choose from: 4:3PS, 4:3LB or 16:9. Please select the mode that is the most compatible with your TV. Password Child Lock Enter the Password option, and press key to enter the sub-menu. When the initial setting is in Password Lock state, the Rating cannot be set and the password cannot be modied. If you need to modify the Rating and password, rst enter the initial password and press Enterkey to unlock (initial password: 0000 or 1234). The new password entered must be four digits and then press Enter key to take eect. Power Resume Enter the Power Resume option and press key to enter the sub-menu. There are two options: "ON" or "OFF". If you choose "ON", then when the power resumes or the CD door is closed again, it will continue playing. If you choose "OFF", then when the power resumes or the CD door is closed again, it will play from the beginning. Video Enter the Video option then press key to enter the sub-menu and select the output mode you require. Rating When playing a disc with a locking function, select the suitable play control rating. This setup can only be carried out when the password lock is o. Remember to switch the password lock back on after you have completed the setup so that the rating restrictions can be applied. 7 8 System Setup System Setup Default Subtitle Lang Key Enter Default option, press key to select Restore, then press Enter] key, so each setup will restore to factory default automatically. Enter the Subtitle Lang option, press key to enter the sub-menu and select the subtitle language you want; ensure that the disc you wish to play has the required capability. Enter theKey option, press key to enter the sub-menu, then use the direction keys Up or Down to adjust the key volume. Hue Enter theHue option, press key to enter the sub-menu, then use the direction keys Up or Down to adjust hue parameters. II. Language Setup The setup operations are as follows:
OSD Language Enter the OSD Language option, press key to enter the sub-menu and select the interface display language you want. Menu Lang Enter the Menu Lang option, press key to enter the sub-menu and select the menu language you need; ensure that the disc you wish to play has the required capability. IV. Video Setup The setup operations are as follows:
Brightness Enter theBrightnessoption, presskey to enter the sub-menu, then use the direction keys Up or Down to adjust brightness parameters. Saturation Enter theSaturationoption, presskey to enter the sub-menu, then use the direction keys Up or Down to adjust saturation parameters.
+4
+2 0
-2
-4 b
+6
+4
+2 0
-2
-4
-6 ENGLISH CHINESE GERMAN SPANISH FRENCH PORTUGUESE Audio Language Enter the Audio Lang option, press key to enter the sub-menu and select the audio language you need; ensure that the disc you wish to play has the required capability. III. Audio Setup The setup operations are as follows:
Audio Out Enter the Audio out option, press key to enter the sub-menu to select the audio out mode. Contrast Enter theContrast option, press key to enter the sub-menu, then use the direction keys Up or Down to adjust contrast parameters. V. Speaker Setup The setup operations are as follows:
Downmix Enter theDownmix option, and press key to enter the sub-menu; there are four modes to choose from: LT / R T, S T E R E O , V S S and 5.1 channel mode. The 5.1 channel output should be set to 5.1 channel. KEY 9 10 System Setup Bluetooth Operation/USB Copy Front Enter theFront option, and press key to enter the sub-menu; there are two modes to choose from: LARGE/SMALL. DUAL MONO Enter theD U A L M O N O option, then press key to enter the next menu; there are four modes to choose from: STEREO/MONO L/ MONO R/ MIX MONO. VI.DOLBY DIGITAL Setup The setup operations are as follows:
OUTPUT MODE Enter theOP MODE option, then press key to enter the next menu; there are two modes to choose from: LINE OUT/RF REMOD. DYNAMIC RANGE Enter theD Y N A M I C R A N G E option, then press key to enter the next menu; use the direction keys Up and Down to select your required option. Bluetooth Reception Create ID3 Information To connect an external device to this unit via Bluetooth:
1. Press "Function Switch" on the remote control or on the panel to select the Bluetooth function. The corresponding screen will then display "BT"
indicating that the Bluetooth function is on. 2. Ensure the Bluetooth function is on on the external device and search for PHSKR24. Once found, click on it and pair. Some devices may need a pin code to connect; try 0000 or 1234. Once connected, you will hear a signal indicating that the connection is successful. USB COPY MP3 File Copy When playing MP3 disc, press Copy key on the remote and enter the copy selection interface; the content that can be copied are the tracks of the current disc being played. MPEG4 File Copy When playing MPEG4 disc, press the Stopkey to return to the menu interface then press the Copy key on the remote and enter the copy selection interface; the content that can be copied are the tracks of the current disc being played. CD File Copy When playing CD disc, press remote, and enter the copy operation interface. key on the REC Multiple Setup 1. Move the highlight bar to the SPEED option, press the ENTER key, and then select the desired multiple (i.e. copy speed). 2. In the copying process, select CHANGE SPEED option or press ENTER key to switch the copy speed. Bit Rate Setup Move the highlight bar to the press rate, the capacity will be enlarged and the quality of le will be closer to that of original le. The system default is: 128 BITRATE to set up; for the le with high bit ENTER option, and KBPS
. Move the highlight bar to CREATE ID3 TAG option, press ENTER key to select or cancel. B y s e l e c t i n g t h i s o p t i o n d u r i n g t h e c o p y i n g p r o c e s s , t h e l e w i l l b e c r e a t e d w i t h I D 3 information which is produced automatically by the system. Create File List Move the highlight bar to CREATE FILE LIST"
option, press ENTER key to select or cancel. B y s e l e c t i n g t h i s o p t i o n d u r i n g t h e c o p y i n g process, a le list will be produced automatically. Create Playlist Move the highlight bar to TRACK option, press right key to select track option and then press ENTERkey to select the song to be copied or to be cancelled. Copy Move the highlight bar to START option; at this time, the information about this copy will be shown on the right hand side (TOTAL TRACKS, TOTAL TIME and TOTAL SIZE). Then press ENTER key to start copying and system will write the CD in M P3 format onto the designated U S B. When copying at normal speed, you can listen to the content to be copied at the same time; when selecting 4 times speed, it will be mute. Please note: when you press the ENTER key to switch speed, there will be slight sound which continues for a few seconds. Cancel Copy During copy, you can move the highlight bar to CANCEL option and press ENTER key to conrm. Return from Copying Screen Move the highlight bar to RETURN option and press ENTERkey to conrm return. P l e a s e n o t e : D u r i n g c o p y, e n s u r e t h a t t h e available space on the USB is enough for the size of the le(s) to be copied then insert the USB into the USB interface. If you have two tracks with the same title, rename one of the tracks, otherwise one track will be saved over the other. While copying, do not pull the USB out or shut the unit down, as this could damage the unit or USB. If the USB cannot be read after it has been copied, please format the USB on your computer.Before you format, please save the important data from the USB. 11 12 Common Operation Common Operation Disc Playing Operation Sequence 1. After reading disc, the unit will automatically go into sequence play mode. 2. Press PLAY/PAUSEkey in pause mode and play mode will be recovered. GOTO Press G O T O key on the remote and use direction keys and number keys to nish time or track selecting function, then press ENTERkey. Function Switching W h e n y o u t u r n t h e u n i t o n , y o u c a n p r e s s F U N C T I O N to switch between the dierent function modes: FM radio, LINE external audio input, Bluetooth or DVD. The unit is set at DVD function as the default. Directory Selecting/ Press the Left key to return to directory list on the left hand side. Then use Up/Down keys to select folder directory on the left hand side. After the selection process is complete, press ENTERkey to enter the playlist of the f o l d e r a n d t h e t r a c k s o f t h e p l a y l i s t w i l l automatically be played in sequence; or you can press number keys to select a specic song. Menu Press MENU when using discs with VCD 2.0, or D V D format. Dierent formats of discs have dierent menus. Repeat While playing, press R E P E AT key on the remote. Dierent formats of discs have dierent repeating approaches to be selected: single cycle, title cycle or disc cycle. Title When playing DVD, you can choose this play mode. Slow During play, press SLOW key on the remote control. To go back to the normal speed, press PLAY. Please note: In this mode, no audio will be heard and it only aects the video les. Record When playing CD, you can press RECORD key to transfer audio le(s) in MP3 format to the USB. Select You can press the number keys on the remote to directly select the required track that you want to play. When VCD is in MENU mode, the track cannot be selected and can only be selected when the MENU mode is o. Dierent formats of discs have dierent selecting approaches(for example press number key 5 to select the 5 track. When selecting 23, press 10+ twice and the screen will show 20+; then press number key 3 or try to press 2 then hold 3 and the unit will select 23). t h COPY Please note: For CD and MP3 discs, the unit will convert MP3 format onto the USB , for MPEG4 discs, it will copy directly. Please see Copy Function Introduction for specic operating instructions. Please note: Please see function introduction for specic operation of FM and audio input. Volume Adjustment Master Volume 111 112 113 114 115 116 117 118 119 120 Press VOLUME + or VOLUME - on the remote or turn the volume control knob on the panel to adjust the volume. While playing, press /PREVIOUSor
/NEXT key to select the previous or next song. Low Pitch 1. Press VOL U MEkey on the panel, select L O W P I T C H B A adjusting state then press VOLUME + or VOLUME-"key on the remote, or turn the volume control knob on the panel to adjust low pitch. 2. Press BASS + or BASS - key on the remote to directly adjust low pitch. 3. Adjustable range of low pitch: from -14 to +14. High Pitch 1. Press VOLUME key on the panel, select H I G H P I T C H T R adjusting state, then press VOLUME + or VOLUME - key on the remote or turn the volume control knob on the panel to adjust high pitch. 2. Press TREB + or TREB - key on the remote to directly adjust high pitch. 3. Adjustable range of high pitch: from -14 to +14. Disc Playing Operation Play MP3 Disc After inserting MP3 disc, the system will automatically search all directories containing an MP3 le. After searching, the system will enter the rst directory by preference and play the rst track of this directory (cursor stops in 01 position).The unit will play the tracks of this directory in sequence. At this time, you can press number keys to select which song you want to play. Press REPEAT key to select single cycle, directory cycle or disc cycle modes. While playing, press PAUSE key to enter Pause" state; press PLAY key to recover from that state. Please note: If you pressPAUSE key twice, you will activate the Pause" function. Play JPEG Disc A f t e r i n s e r t i n g J P E G d i s c , t h e u n i t w i l l automatically search and stop at the rst image of the rst directory found. Use the Up/Down keys to select image les; after you have nished selecting the images, press P L AY key to play from current image. Use the Up/Down keys to select image les;
after you have nished selecting the images, press ENTER key to view the image. At this time, the image is in an idle state and you can press ZOOM key to zoom in on the image or press direction keys to move the image in dierent directions. When the image is idle and not zoomed in, press direction keys to rotate the image. Press P L AY key to play the image in sequence. After entering le menu on the right hand side, press the Up/Down keys and image content will be shown on the left hand side of the screen. You can also use this approach to view le(s). Play MP3-JPEG Disc If you want to view images while playing MP3-
JPEG mixed directory discs, use the Left/Right keys to select modes then use the direction keys to move the cursor to the icon of the required image and press ENTER to view the image. 13 14 Common Operation Radio Station/ Audio Input Operation
[01_ JPG]101. JPG 01.JPG 02.JPG 03.JPG 04.JPG 05.JPG 06.JPG 07.JPG 08.JPG 09.JPG 10.JPG The method to viewing images is the same as that for playing JPEG discs. If you want to view other types of les while playing MP3-other mixed directory discs, use the Left/Right keys to select mode then use the direction keys to move the cursor to the icon you want to view and press ENTER to play the selected le. While playing discs with mixed directories, the approach to select a le is the same as playing MP3 disc. The unit will automatically load the les to be played when a disc is inserted. The music les will play by default if there are also supported photo, movie and E book les on the disc. Play USB When the USB has only one type of le, the playing method is the same as when you play a disc. When the USB has various types of les, the unit will play the audio les with the MP3 or WMA formats after it has
. The method to playing other types of les is the same as when you play a disc. nished its search Source switching 1.While the disc is playing, pressSOURCEkey on the remote control to switch to USB mode. 2. An interface will appear when switching from disc to USB. Press direction keys to select the le then press ENTERkey for conrmation. 3.System will automatically load the USB les when there is no disc loaded. FM Operation FM Radio Press FUNCTION or FM key on the panel or remote to switch the unit to FM operation mode. Radio Program Selection Press and keys on the remote or / PREVIOUS and /NEXTkeys on the panel to select stored radio program. Manual Search Radio Storage After operating the "Auto Search", the unit will automatically store the radio program(s) found in sequence. After operating manual search or frequency-selecting search, the unit will automatically store current radio frequency into current program. External Audio Input Setting Press FUNCTION key or AUX key on the remote or panel to switch the unit into audio input state. At this time, the unit will display LINE. At this time, the AUX or Audio Input channel interface of the unit must be connected to AF generator input of any machine. Press Fast BackwardorFast Forward keys on the panel or remote to manually tune and search. You can search desired radio stations backwards or forwards. Auto Search Press SEARCHkeys on the panel or press and hold SEARCH key on the remote control then the unit will automatically search in full band. FM frequency range:87-108 M H Z (50 K H Z for each step). Please note: After you have found your specic station, the unit will automatically store it into current program. The FM search is aected by the radio signal strength. If no program is found during auto search or an oset frequency occurs, please use manual search, frequency-selecting search or adjust frequency by adjusting antenna position. Frequency-Selecting Search the remote Press GOTO key on
, the unit will display frequency-selecting state then use number keys to input your desired radio frequency. FM frequency range: 87-108 MHZ E.g. Input 1060 for 106 MHZ; input 9140 for 91.4 MHZ. The frequency input must have 4 gures. 15 If there are only 3 eective gures, please add 0 before the rst gure. 16 Troubleshooting Specifications Before repairing, please take a look at the following problems and possible solutions rst. Main Technical Parameters Problem Reason Measure No power. Plug not properly connected. Connect attaching plug properly. The unit doesn't work after the power has been switched on. No disc or USB inserted. Insert disc or USB. No image. No sound. TV isn't set to DVD output. Bad video connection or not connected well. Set TV to current output platform. Replace TV connection or connect correctly. Connected TV doesn't work. Ensure TV works properly. Not set to current connecting channel. Bad audio connection or not connected well. Connected unit doesn't work or volume shutdown. Set to current connecting channel. Replace audio connection or connect correctly. Ensure connected unit works properly or turn volume up. Bad image quality. Disc is dirty. Clean disc. Bad image quality of disc. Replace disc with good image quality. No disc inserted. Insert disc. Disc installed upside down. Place the silk-screen side upwards. Item Parameter Index MPEG4 DVD Disc Type SVCD VCD DVCD MP3 CD CD-R CD-RW Audio: 2.0 Track independent output Output Interface Video: Composite signal (AV) output Y, Pb/Cb, Pr/Cr component video output Video range: 1. 0Vp_p(75 loading) Video Characteristics Y output range: 1. 0Vp_p(75 loading) DVD player is not activated. Disc installed incorrectly into it's slot. Place disc into it's slot correctly. C output range: 0. 286Vpp/NTSC; 0. 3Vp_p/PLA (75 loading) Disc is dirty. Clean disc. TV displays setting screen. Quit setting state. Remote malfunction. Mp3 no sound or with noise. USB les are unavailable Locking level is activated. Unlock or change locking level. Remote is not aimed at the receiving window. The remote and DVD player are too far away from each other. Aim remote at the receiving window. Please operate within eective range of 7m. There is a large obstacle between the remote and the receiving window. Please move obstacle. Remote has low batteries. Please replace with new batteries. Unsupported le format. Skip the le. No le on the USB or format is incorrect. Please store supportable le formats or format the USB then re-copy the les. USB damaged. Repair or replace the USB. Frequency characteristics: 20Hz ~20KHz (75dB) Audio Characteristics SNR: >80dB THD: <0.01%
Power Voltage 230V~ 50Hz Consumed Power 60W Output Power 2x30W Operating Temperature
-10~+45 Operating Humidity 15~75% (No drop condensation) Spares Audio/Video Cable, Remote, Manual, FM Antenna Please note: Design and specication parameters can change without prior notice. 17 18 FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.