FCC ID: 2AZJ3-C2 Vintage Bluetooth Speaker

SPECIFICATIONS Bluetooth Range: Up to 33 feet (10 meters) Battery Type: Polymer Lithium Ion Battery Charging Input:

Play Time: Approximately 3-5 hours**

Charging Time: Approximately 1-2 hours DC 5V 500mA

**Applicable at 50% of maximum volume. Results will be lower when volume is higher. CHARGING Vintage Bluetooth Speaker A QUICK LOOK USERS MANUAL I BS-ES23 The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license. Other trademarks and trade names are those of their respective owners. 0 4 50 60 7 0 8 0 9 0 100 30 0 2 0 1 0 Power Previous track/ Decrease vol. Next track/ Increase vol. Charging Port LED Indicator Micro USB Plug USB Plug 1. The included USB charging cable has a Micro USB plug and a standard USB plug. 2. Insert the cables standard USB plug into the USB port of a computer or suitable USB charging adapter. Then insert the cables Micro USB end into the speakers charging port. Charging in red light, Light off after full charge. BLUETOOTH PAIRING 0 4 50 60 7 0 8 0 9 0 100 30 0 2 0 1 0 PRESS & HOLD 2-3 SEC Bluetooth Speaker connected 1. Press and hold the Power button for 2-3 seconds to turn the speaker On. 2. Go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is turned on. Connect to the device listed as "Bluetooth Speaker."

MUSIC CONTROLS 0 4 50 60 7 0 8 0 9 0 100 30 0 2 0 1 0 0 4 50 60 7 0 8 0 9 0 100 30 0 2 0 1 0

0 4 50 60 7 0 8 0 9 0 100 30 0 2 0 1 0

1. Press and hold the Power button for 2-3 3.Short press the Next track/Increase vol. button to increase the volume. Press and hold the button to go to the next track. 4.Short press the Previous track/Decrease vol. button to decrease the volume. Press and hold the button to go to the previous track. OTHER FUNCTIONS 0 4 50 60 7 0 8 0 9 0 100 30 0 2 0 1 0 TWS 1. Turn on two speakers, and short press power button into TWS mode

(Do not do BT paring pls). 2. Short press twice one of the power button into tws paring. 3. Wait for ting voice means tws paring nish automatically. 4. Do BT paring, then go for music playing. 5. End TWS paring: close BT paring rstly, short press twice power button to end tws paring. VIVITAR ONE YEAR WARRANTY This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year. What Is Not Covered by Warranty Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modication or accident. To Obtain Warranty Service and Troubleshooting Information:

Call 1-800-592-9541 or visit our website at www.vivitar.com. To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired. 2023 Sakar International 195 Carter Drive Edison, NJ 08817 Support: 800 592 9541 www.vivitar.com IMPORTANT SAFETY PRECAUTIONS 1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER. 2. Do not allow children to use the speaker without proper adult supervision. 3. Do not expose your speaker to excessive heat or re. 4. Always press the buttons carefully. 5. Do not use in extremely dry environments as this can lead to static discharge during usage. 6. Do not expose your speaker to temperatures above 104/ 40C. Keep out of direct sunlight. 7. Do not attempt to repair this product yourself. Contact a qualied service center if your speaker are in need of service. 8. Do not drop, puncture or expose the speaker to extreme physical force. 9. Your speaker are not intended for commercial use. 10. Do not place the speaker near objects that generate a strong magnetic eld. 11. Use only the included charging cable. 12.Unplug this device when not in use for long periods of time and during lightning storms. 13. Do not pull or yank on the power cable. Always remove the cable gently from wall outlets and the speakers charging port. 14. Use a soft cloth to clean your speaker. Never use rubbing alcohol or other harsh chemicals. 15. Please recycle or dispose of your speaker properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your speaker for futher information. FCC STATEMENT Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Consult the dealer or an experienced radio/TV technician for help.

Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

***** END OF REPORT *****

FCC Test Report Page 1 of 1

Sound Tide Electronics (DongGuan) Co., Limited. 8/8/2022 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2AZJ3-C2 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules and FCC Guidance document 726920, we hereby request confidential treatment of information accompanying this application as outlined below:

PERMANENT LONG-TERM CONFIDENTIALITY:

Schematics Block Diagrams Theory of Operation SHORT TERM CONFIDENTIALITY FOR A PERIOD OF 180 DAYS:

Internal Photos External Photos User Manual Test Set-up Photographs When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed:

Printed name: Carrie Niu Title: Sales Manager