Wireless Module WPET-239ACN(BT) 802.11ac/a/b/g/n 2T2R Wi-Fi + Bluetooth 5.0 Half Mini PCIe Module SparkLAN WPET-239ACN(BT) is a highly integrated single-chip Wireless LAN (WLAN), Bluetooth module which supports 2 streams 802.11ac solutions with multi-user MIMO (Multiple-Input, Multiple-Output) wireless LAN (WLAN) and integrated Bluetooth 5.0. It is integrated 2Tx2R WLAN MAC, baseband, and dual band RF in a single chip module. WPET-239ACN(BT) provides a cost effective solution for M2M
(machine to machine) connectivity product/device by PCIe. WPET-239ACN(BT) 802.11ac/abgn 2Tx2R WLAN/BT module with various USB input format & internal printing or external RF antenna connector for high performance wireless LAN and Bluetooth device. It is designed to provide completely M2M connection & excellent cost performance with low power consumption and enhance the advantages of robust system & applications. Embedded Application Key Feature Applications include portable handheld 802.11ac/a/b/g/n Wi-Fi +Bluetooth 5.0 devices, thin client computer, medical Support 802.11ac 2x2, compliant with MU-MIMO. devices, network security & monitoring, Operates in 2.4GHz and 5GHz frequency bands 3D printer, TV, STB, POS, digital signs, Maximum data rates: 54Mbps in 802.11g, 300Mbps in gaming machine, robotic machinery, 802.11n, 866.7Mbps in 802.11ac. industrial tablets, etc. BT 5.0 features including Low-Energy 2 Mbps All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 WUBT-239ACN(BT) ver.0.91 Wireless Module Operating Frequency ISM Band: 2.412GHz~2.484GHz, 5.150GHz~5.850GHz Specification Standards Chipset Data Rate Interface Form Factor Antenna IEEE 802.11ac/a/b/g/n (2T2R) Bluetooth V5.0, V4.2, V4.1, V4.0 LE, V3.0+HS, V2.1+EDR Realtek RTL8822CU 802.11b: 11Mbps 802.11a/g: 54Mbps 802.11n: MCS0~15 802.11ac: MCS0~9 Bluetooth: 1Mbps, 2Mbps and up to 3Mbps EDR IEEE 802.11 ac/a/b/g/n
*Subject to local regulations WLAN: PCIe; Bluetooth: PCIe;
Half Mini PCIe 2 x IPEX MHF1 connectors or printed antenna for 2T2R (ANT0 for WIFI only, ANT1 for WIFI+BT) WiFi :
802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.11n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.11a: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) Modulation 802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM) BT:
Header: GFSK Payload 2M:/4-DQPSK Payload 3M: 8-DPSK TX mode RX mode Power Consumption All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 Wireless Module All Rights Reserved. SparkLAN may make changes to specification and descriptions at any time without prior notice. www.sparklan.com / sales@sparklan.com / +886 2 2659-1880 Installation Connect the Module to the PCIe slot of the computer. After the Wi-Fi Driver is installed , click the Network icon on the Windows, then Install Wi-Fi driver driver. search the network , and connect the Wireless Network you want. Federal Communication Commission Interference Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. RF exposure statements This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 24 centimeters between the radiator and your body or nearby persons. CFR 47 FCC PART 15 SUBPART C (15.247) and SUBPART E (15.407) has been investigated. It is applicable to the modular transmitter. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. This radio transmitter RYK-WPET239ACNBT has been approved by Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Unique antenna connector (RP-SMA) must be used on the Part 15 authorized transmitters used in the host product. Maximum Gain (dBi) Antenna Type Brand Antenna Model Dipole SparkLAN AD-301N Dipole SparkLAN AD-103AG Dipole SparkLAN AD-305N Dipole SparkLAN AD-303N Dipole SparkLAN AD-302N Dipole SparkLAN AD-315N 2.4 GHz 4.4 dBi 2.02 dBi 5 dBi 3.14 dBi 3.14 dBi 3 dBi Length of RF cable:150mm Connector type of RF cable: I-PEX/MHF1 to RP-SMA(F) 5GHz 5.8 dBi 2.03 dBi 5.53 dBi 3.45 dBi 2.87 dBi 5 dBi If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: RYK-
WPET239ACNBT Or Contains FCC ID: RYK-WPET239ACNBT The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. Industry Canada statement:
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) lappareil ne doit pas produire de brouillage;
2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Caution:
1) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
3) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and Avertissement:
1) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
2) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la imitation P.I.R.E.;
3) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 24cm between the radiator & your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 24 cm de distance entre la source de rayonnement et votre corps. This radio transmitter (IC: 6158A-PET239ACNBT has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 6158A-PET239ACNBT a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs cidessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour Maximum Gain (dBi) l'exploitation de l'metteur. Antenna Type Brand Antenna Model Dipole SparkLAN AD-301N Dipole SparkLAN AD-103AG Dipole SparkLAN AD-305N Dipole SparkLAN AD-303N Dipole SparkLAN AD-302N Dipole SparkLAN AD-315N 2.4 GHz 4.4 dBi 2.02 dBi 5 dBi 3.14 dBi 3.14 dBi 3 dBi 5GHz 5.8 dBi 2.03 dBi 5.53 dBi 3.45 dBi 2.87 dBi 5 dBi If the ISED certification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains IC: 6158A-PET239ACNBT. Si le numro de certification ISDE n'est pas visible lorsque le module est install l'intrieur d'un autre appareil, alors l'extrieur de l'appareil dans lequel le module est install doit galement afficher une tiquette faisant rfrence au module inclus. Cette tiquette extrieure peut utiliser un libell comme celui-ci: Contient IC:
6158A-PET239ACNBT. Plaque signaltique du produit final:
Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante:
"Contient des IC: 6158A-PET239ACNBT ". Manual Information To the End User:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manue Must use the device only in host devices that meet the FCC/ISED RF exposure category of mobile, which means the device is installed and used at distances of at least 24cm from persons. The end user manual shall include FCC Part 15 /ISED RSS GEN compliance statements related to the transmitter as show in this manual. Host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as Part 15 B, ICES 003. Host manufacturer is strongly recommended to confirm compliance with FCC/ISED requirements for the transmitter when the module is installed in the host. Must have on the host device a label showing Contains FCC ID: RYK-WPET239ACNBT, Contains IC: 6158A-PET239ACNBT The use condition limitations extend to professional users, then instructions must state that this information also extends to the host manufacturers instruction manual. in end system. If the end product will involve the Multiple simultaneously transmitting condition or different operational conditions for a stand-alone modular transmitter in a host, host manufacturer have to consult with module manufacturer for the installation method l'hte doit utiliser l'instrument uniquement dans des dispositifs qui rpondent la fcc / (catgorie d'exposition rf mobile, ce qui signifie le dispositif est install et utilis une distance d'au moins 24 cm de personnes. le manuel de l'utilisateur final doit inclure la partie 15 / (fac rss gen dclarations de conformit relatives l'metteur que de montrer dans ce manuel. le fabricant est responsable de la conformit de l'hte, le systme d'accueil avec le module install avec toutes les autres exigences applicables du systme comme la partie 15 b, ices - 003. accueillir le fabricant est fortement recommand de confirmer la conformit avec les exigences de la fcc / (metteur lorsque le module est install dans l'hte. le dispositif d'accueil doivent avoir une tiquette indiquant contient FCC ID: RYK-
WPET239ACNBT, contient IC : 6158A-PET239ACNBT