|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7
|
Effective |
2018-01-17
|
|
1 2 3 4 5 6 7
|
2017-09-12
|
|
1 2 3 4 5 6 7
|
Applicant's complete, legal business name |
SparkLAN Communications, Inc.
|
|
1 2 3 4 5 6 7
|
FCC Registration Number (FRN) |
0015463375
|
|
1 2 3 4 5 6 7
|
Physical Address |
8F., No.257, Sec. 2, Tiding Blvd., Neihu District
|
|
1 2 3 4 5 6 7
|
Taipei, N/A
|
|
1 2 3 4 5 6 7
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7
|
TCB Application Email Address |
L******@ul.com
|
|
1 2 3 4 5 6 7
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5 6 7
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7
|
Grantee Code |
RYK
|
|
1 2 3 4 5 6 7
|
Equipment Product Code |
261ACNBT
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7
|
Name |
G****** L****
|
|
1 2 3 4 5 6 7
|
Title |
Manager
|
|
1 2 3 4 5 6 7
|
Telephone Number |
+886-******** Extension:
|
|
1 2 3 4 5 6 7
|
Fax Number |
+886-********
|
|
1 2 3 4 5 6 7
|
E-mail |
g******@sparklan.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 | No |
| 1 2 3 4 5 6 7 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 7 | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 5 6 7 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11ac/b/g/n Wi-Fi+BT Module |
| 1 2 3 4 5 6 7 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 7 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 6 7 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 6 7 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015 |
| 1 2 3 4 5 6 7 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 | Grant Comments | Class II Permissive Change filing for adding new antennas.
Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 1 2 3 4 5 6 7 | Class II Permissive Change filing for adding new antennas.
Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 1 2 3 4 5 6 7 | Class II Permissive Change filing for adding new antennas.
Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 1 2 3 4 5 6 7 | Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 1 2 3 4 5 6 7 | Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 1 2 3 4 5 6 7 | Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 1 2 3 4 5 6 7 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7
|
Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
|
1 2 3 4 5 6 7
|
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
|
1 2 3 4 5 6 7
|
Name |
K****** L****
|
|
1 2 3 4 5 6 7
|
R******** C****
|
|
1 2 3 4 5 6 7
|
Telephone Number |
+886-******** Extension:
|
|
1 2 3 4 5 6 7
|
886-3******** Extension:
|
|
1 2 3 4 5 6 7
|
Fax Number |
+886-********
|
|
1 2 3 4 5 6 7
|
886-3********
|
|
1 2 3 4 5 6 7
|
E-mail |
k******@tw.bureauveritas.com
|
|
1 2 3 4 5 6 7
|
r******@tw.bureauveritas.com
|
|