FCC ID: RYK-WPEQ268AXBT Wi-Fi 6E BT Half Min PCIe Module

Wireless Module WPEQ-268AXI(BT) WPEQ-268AX(BT) Manual IEEE 802.11ax/ac/a/b/g/n (2T2R) Bluetooth V5.2, V5.1, V5.0, V4.2, V4.1, V4.0LE, V3.0, V2.1+EDR Qualcomm Atheros WCN6856 802.11b: 11Mbps 802.11a/g: 54Mbps 802.11n: MCS0~15 802.11ac: MCS0~9 802.11ax: HE0~11 Bluetooth: 1 Mbps, 2Mbps and Up to 3Mbps IEEE 802.11ax/ac/a/b/g/n SPEC Standards Chipset Data Rate Operating Frequency ISM Band, 2.412GHz~2.484GHz, 5.150GHz~5.850GHz ,5.925~7.125GHz Interface Form Factor Antenna

*Subject to local regulations WLAN: PCIe Bluetooth: USB Half Mini PCI-e 2 x IPEX MHF1 connectors

(Ant 1 for WLAN/BT, Ant 2 for WLAN) Wi-Fi:

802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.11n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) Modulation 802.11a: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM) 802.11ax: OFDMA (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM) BT:

Header: GFSK Wireless Module Payload 2M: /4-DQPSK Payload 3M: 8-DPSK Operating Voltage DC 3.3V Operating Temperature Range WPEQ-268AXI(BT) :-40~+75C (Operating) WPEQ-268AX(BT) :-10~+65C (Operating) Storage Temperature Range

-45C~90C Humidity 5%~90% (Operating)

(Non-Condensing) 5%~90% (Storing) Dimension L x W x H (in mm) 29.85mmx 26.65mmx 2.5mm Weight (g) Security 3.2g 64/128-bits WEP, WPA, WPA2, WPA3, 802.1x Block Diagram Wireless Module Wireless Module Installation Connect the Module to the PCIe slot of the computer. After the Wi-Fi Driver is installed , click the Network icon on the Windows, then search the network , Install Wi-Fi driver driver. and connect the Wireless Network you want. Federal Communication Commission Interference Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. RF exposure statements This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body or nearby persons. CFR 47 FCC PART 15 SUBPART C (15.247) and SUBPART E (15.407) has been investigated. It is applicable to the modular transmitter. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Wireless Module This radio transmitter RYK-WPEQ268AXBT has been approved by Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Unique antenna connector must be used on the Part 15 authorized transmitters used in the host product. Antenna Type Brand Antenna Maximum Gain (dBi) Model 2.4 GHz 5GHz 6GHz Remark Dipole SparkLAN AD-506AX 2.65 dBi 4.81 dBi 4.98 dBi Dipole SparkLAN AD-501AX 3.7 dBi 5 dBi 5 dBi Dipole SparkLAN AD-312N 2.65 dBi 4.86 dBi N/A Dipole SparkLAN AD-509AX 3.7 dBi 5 dBi 5 dBi Dipole SparkLAN AD-103AG 2.02 dBi 2.03 dBi N/A Dipole SparkLAN AD-302N 3.14 dBi 2.87 dBi N/A Dipole SparkLAN AD-303N 3.14 dBi 3.45dBi N/A Dipole SparkLAN AD-315N 3 dBi 5 dBi N/A Dipole SparkLAN AD-507AX 2.67 dBi 4.87 dBi 4.94 dBi Dipole SparkLAN AD-508AX 2.67 dBi 4.87 dBi 4.94 dBi Length of Antenna cable:550mm Connector type of Antenna cable: I-PEX Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX to RP-SMA Length of Antenna cable:550mm Connector type of Antenna cable: I-PEX Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX to RP-SMA Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX to RP-SMA Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX to RP-SMA Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX Length of Antenna cable:250mm Connector type of Antenna cable: I-PEX If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID:

RYK-WPEQ268AXBT Or Contains FCC ID:RYK-WPEQ268AXBT The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that Wireless Module apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. Manufacturers of U-NII devices are responsible for ensuring frequency stability such that an emission is maintained within the band of operation under all conditions of normal operation as specified in the users manual. The module is for indoor applications only. The module may not be used for the purposes of remote control of drones The antenna must be installed into the host device so that the end user does not have access to the antenna or its connector. Minimum antenna gain, including any cable losses, for the 6GHz bands must exceed 0dBi. When installed in the host there cannot be a direct connection to the internet Industry Canada statement:

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) lappareil ne doit pas produire de brouillage;

2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Caution:

1) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

2) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;

Wireless Module 3) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-

point and non-point-to-point operation as appropriate; and Avertissement:

1) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

2) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la imitation P.I.R.E.;

3) Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This radio transmitter (IC:6158A-WPEQ268AXBT has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC:6158A-WPEQ268AXBT a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs cidessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Wireless Module Antenna Type Brand Antenna Maximum Gain (dBi) Model 2.4 GHz 5GHz 6GHz Remark Dipole SparkLAN AD-506AX 2.65 dBi 4.81 dBi 4.98 dBi Dipole SparkLAN AD-501AX 3.7 dBi 5 dBi 5 dBi Dipole SparkLAN AD-312N 2.65 dBi 4.86 dBi N/A Dipole SparkLAN AD-509AX 3.7 dBi 5 dBi 5 dBi Dipole SparkLAN AD-103AG 2.02 dBi 2.03 dBi N/A Dipole SparkLAN AD-302N 3.14 dBi 2.87 dBi N/A Dipole SparkLAN AD-303N 3.14 dBi 3.45dBi N/A Dipole SparkLAN AD-315N 3 dBi 5 dBi N/A Dipole SparkLAN AD-507AX 2.67 dBi 4.87 dBi 4.94 dBi Dipole SparkLAN AD-508AX 2.67 dBi 4.87 dBi 4.94 dBi Length of Antenna cable:550mm Connector type of Antenna cable: I-PEX Length of Antenna cable:550mm Connector type of Antenna cable: I-PEX to RP-SMA Length of Antenna cable:550mm Connector type of Antenna cable: I-PEX Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX to RP-SMA Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX to RP-SMA Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX to RP-SMA Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX Length of Antenna cable:150mm Connector type of Antenna cable: I-PEX Length of Antenna cable:250mm Connector type of Antenna cable: I-PEX If the ISED certification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains IC: 6158A-WPEQ268AXBT. Si le numro de certification ISDE n'est pas visible lorsque le module est install l'intrieur d'un autre appareil, alors l'extrieur de l'appareil dans lequel le module est install doit galement afficher une tiquette faisant rfrence au module inclus. Cette tiquette extrieure peut utiliser un libell comme celui-ci: Contient IC:6158A-WPEQ268AXBT. Plaque signaltique du produit final:

Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC:6158A-WPEQ268AXBT ". Wireless Module Manual Information To the End User:

The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manue Must use the device only in host devices that meet the FCC/ISED RF exposure category of mobile, which means the device is installed and used at distances of at least 20cm from persons. The end user manual shall include FCC Part 15 /ISED RSS GEN compliance statements related to the transmitter as show in this manual. Host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as Part 15 B, ICES 003. Host manufacturer is strongly recommended to confirm compliance with FCC/ISED requirements for the transmitter when the module is installed in the host. Must have on the host device a label showing Contains FCC ID:RYK-WPEQ268AXBT, Contains IC:6158A-

WPEQ268AXBT The use condition limitations extend to professional users, then instructions must state that this information also extends to the host manufacturers instruction manual. If the end product will involve the Multiple simultaneously transmitting condition or different operational conditions for a stand-alone modular transmitter in a host, host manufacturer have to consult with module manufacturer for the installation method in end system. l'hte doit utiliser l'instrument uniquement dans des dispositifs qui rpondent la fcc / (catgorie d'exposition rf mobile, ce qui signifie le dispositif est install et utilis une distance d'au moins 20 cm de personnes. le manuel de l'utilisateur final doit inclure la partie 15 / (fac rss gen dclarations de conformit relatives l'metteur que de montrer dans ce manuel. le fabricant est responsable de la conformit de l'hte, le systme d'accueil avec le module install avec toutes les autres exigences applicables du systme comme la partie 15 b, ices - 003. accueillir le fabricant Wireless Module est fortement recommand de confirmer la conformit avec les exigences de la fcc / (metteur lorsque le module est install dans l'hte. le dispositif d'accueil doivent avoir une tiquette indiquant contient FCC ID: RYK-WPEQ268AXBT, contient IC :6158A-WPEQ268AXBT Operation shall be limited to indoor use only. Operation on oil platforms, cars, trains, boats and aircraft shall be prohibited except for on large aircraft flying above 10,000 ft. Le fonctionnement doit tre limit une utilisation en intrieur uniquement. L'exploitation sur les plates-formes ptrolires, les voitures, les trains, les bateaux et les aronefs est interdite, sauf pour les gros aronefs volant au-dessus de 10 000 pieds.

ape Product label

=. Model No.:WPEQ-268AXI(BT) [W] Ce MAC230000000000X BT MAC:XXX0000OOOXXX FCC ID:RYK-WPEQ268AXBT IC:6158A-WPEQ268AXBT ST MAC Ba sN| S/N label

Attestation Letter Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product/ Model Number: Wi-Fi 6E BT Half Min PCle Module | WPEQ-268AXI(BT) 1. This device will only associate with a low power indoor AP for WIFI 6E operations. Hotspot Mode, ad-hoc and any other P2P service is disabled for WIFI 6E operations. This device will not connect directly to another client device using WIFI 6E frequencies. 2. This device will always initiate transmission under the control of a low power indoor AP or subordinate except for brief transmissions before joining a network. These short messages will only occur if the client has detected an indoor AP or subordinate operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. 3. The transmissions will be lower or equal to the power advertised by the indoor low-power access point and never above the maximum output power allowed by the FCC grant for equipment class 6XD. 4. Contention-based protocol as demonstrated in the test report is permanently embedded in the module and is not host-dependent. 5. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. Not allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. For modules this requirement is extended to Host Integrator through integration instructions. 6. Device protocol attestation and contention-based protocol apply to functions permanently embedded in the module and cannot be host-dependent. Otherwise, the module must be restricted and filed as a Software Defined Radio or with joint responsibility agreements. 7. Device Restriction statements: We, the grantee, will document the physical restrictions associated with the equipment classes for host products (wired power, integral antenna, non-

weatherized enclosure) as conditions-of-use through the host manufacture's integration instructions. Sincerely,. Gaody, Z~

Company Name: SparkLAN Communications, Inc. Contact Name: Grady Lin Tel: +886 2 2659 1880 Fax: +886 2 2659 5538 Email: grady.lin@sparklan.com Address: 5F, No. 199, Ruihu St., Neihu Dist., Taipei City 114067, Taiwan Data : 2022/10/13 rnp oe Attn: OET Dept. Product/ Model Number: Wi-Fi 6E BT Half Min PCle Module / WPEQ-268AXI(BT), WPEQ-268AX(BT)