FCC ID: 2ASCN-DC1218 Dual Catchmon

AUTO Auto-collecting items User Manual AUTO walking for hatching Eggs Auto-catching Pokemon 1P/LED status light/

function key 2P/LED status light/

function key Hanging hole Two alkaline AAA batteries

(not included) to be inserted in battery compartment in strap A A A A AA Kill two birds with one stone Dual accounts can be used. One-click connection Automatically replenish and capture, earn stardust, candy, and XP 600 hours of standby powe Goes into sleep mode when disconnected, with up to 600 hours of standby power, alkaline AAA batteries recommended. Capture time delay function Built-in unique function captures time delay. No setting necessary. How to connect Catchmon with phone for first time Insert two AAA batteries and DualCatchmon will automatically start. 1P and 2P will flash green several times and enter work mode before connection. AVAILABLE DEVICES Main Menu 2.Go to Pokemon Go and click Main Menu 3.Click Settings in upper right corner Settings Connecting to Pokmon Go Plus... 6.After successful connection, available devices on the app will light up like the graph. LED will be purple and flashing when Catchmon is connected. If Catchmon had successfully connected with phone before and signal is lost, LED will be blue and flashing. To reconnect, simply click Go Plus icon at top right in phone app map. (Purple light flashing if connection successful) AVAILABLE DEVICES AVAILABLE DEVICES 4.Go to bottom and click Pokmon Go Plus. Two available devices (Catchmon 1P and 2P) are shown below. A green light will ash in Catchmon before it connects with phone. 5.Press Catchmon 1P or 2P. A light will appear at the center of available device in phone. Click on desired device on phone to start connecting with Catchmon. To connect with new phones, first delete old Catchmon connection. Methods are indicated as follows. Catchmon tips 1. Catchmon's built-in random delay capture time. 2. If bag is full and cannot collect items from Pokestop, first deactivate "Nearby Pokestop" notification in Go Plus. 3. If out of red Pokeballs and temporarily cannot capture, first deactivate "Nearby Pokmon" notification in Go Plus. Alternate and make it easier to collect, capture, and acquire stardust. NOTIFICATIONS NOTIFICATIONS Nearby Pokemon Nearby Pokestop Function and light description Light, sound and vibration description Additional Instructions Press Catchmon button to switch between the different light functions. Press once and go from blue light > green light > purple light in order. Switch to the desired light option, then set up based on the instructions below. Blue light: to disconnect Catchmon with a new phone, first delete previous connection memory. After pressing and blue light comes on, long press for 3s to disconnect. When disconnecting, blue and yellow flashing light will appear in Catchmon. Disconnection successful: green light flashes Disconnection unsuccessful: red light flashes Green light: notification sound switch Green light: sound on Green breathing light: sound off In green light display, press for 3s to switch off notification sound setting. Turned on: green light flashes Turned off: red light flashes Purple light: vibration switch Purple light: vibration on Purple breathing light: vibration off In purple light display, press for 3s again to switch off vibration setting. Turned on: purple light flashes Turned off: red light flashes Long press both buttons for 3s. Red light will flash several times and both sound and vibration functions will be turned off. connection status display light Red flashes status Low battery sound NA vibration NA Green Blue Purple Red Awaiting bluetooth connection 1P-beep~ twice ; 2P-beep beep~ twice single vibration twice Bluetooth connected /

Signal disconnected Signal connection successful Phone unable to connect to Internet 1P-beep~ twice ; 2P-beep beep~ twice single vibration twice NA NA beep~ triple single vibration triple Within 3min, connection status (sound & vibration) is prompted every 10s; between 3-10 min, every 30s;

longer than 10min, no prompted. Game status display status sound vibration light Blue Green Yellow White Red Within range of a PokeStop A Pokemon is nearby A Pokemon is nearby (haven't caught) Catching Pokemon Pokemon runs away. NA NA NA NA NA NA NA NA NA NA NA NA Multicolor Successfully catching a Pokemon or visiting a PokeStop White Red Red Item storage is full Beep~ triple Singal vibration triple Out of Pokeball Beep beep beep~ triple Tri-vibration triple Out of range of the PokeStop Beep beep~ triple Dual vibrataion triple Catchmon consumes very little power and has power-saving and sleep mode features. Pokemon app will automatically disconnect from Catchmon every hour. If not reconnected after 10min, Catchmon will go into sleep mode. Player can press Go Plus connection icon in app anytime and automatically call up Catchmon to reconnect.When changing batteries, DualCatchmon will retain all settings in memory so reset is not necessary. If unable to connect with Catchmon, please try the following:

1. Disconnect Pokemon Go Plus Bluetooth device in phone. 2. Go to game settings and disconnect Pokemon Go Plus. 3. Turn off game and restart. 4. Restart Catchmon and Pokemon Go App connection. P.S: Pokemon Go App, Android and iOS system upgrades may cause Catchmon to not connect. Multiple Catchmons in one place will also cause Bluetooth interference in phone and cause disconnection. FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Non-modification Statement :

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radiation Exposure Statement :

The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. Compatible with iphone 6 or higher devices with iOS Ver. 11 or higher installed. Compatible with Android devices with 2 GB RAM or more. Bluetooth Smart (Bluetooth Ver. 4.0 or higher) capability and Android Ver. 7.0 or higher installed. Copyright Sperry Corporation All Rights Reserved. Dual Catchmon is the trademark of Sperry Corporation. Pokemon / PokemonGo / Pokemon Go Plus are the trademarks of Nintendo. The other trademark names are the used marks, trademarks or registered trademarks of the corresponding companies. This Product is not sponsored, endorsed, or approved by Nintendo, ThePokmon Company Or Niantic. 369 , Fu-Shin North Road , Taipei Taiwan Power Rating: DC 3V, AAA batteries*2

CERPASS TECHNOLOGY CORP. Report No.: 1901254 Cerpass Technology Corp. Issued Date

: Mar. 13, 2019 Page No.

: 2 of 3 CERPASS TECHNOLOGY CORP. Report No.: 1901254 Cerpass Technology Corp. Issued Date

: Mar. 13, 2019 Page No.

: 3 of 3

CERPASS TECHNOLOGY CORP. Report No.: 1901254 Photographs of EUT Cerpass Technology Corp. Issued Date

: Mar. 13, 2019 Page No.

: 1 of 3

Label and label Location Product Name: Catchmon Brand: MEGACOM Model No.: DC-1218

FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue 5 Page 1 of 1 Company Name: Sperry Corporation Address: 8F-7, No. 369, Fuxing N. Rd., Songshan Dist. City: Taipei City 104 Country: Taiwan(R.O.C.) To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2ASCN-DC1218 Reference number: ###HHHt Dear FCC TCB, 1, Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material &] Block Diagrams

& Operational Description [X] Schematic Diagrams 1 Tune-up Procedure Above materials contain secrets, proprietary and tchnical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission's policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

C Internal Photos User's Manual Test Set-up Photos External Photos Justification:

Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2019/01/25 Name and signature of applicant: Kevin Lai 01 far Notes:

1) A document or type of document can only have ONE type of confidentiality! /

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 tirhs (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Declaration of Authorization We Name: Sperry Corporation Address: 8F-7, No. 369, Fuxing N. Rd., Songshan Dist. City: Taipei City 104 Country: Taiwan (R.O.C.) Declare that:

Name Representative of agent: Delia Feng Agent Company name: Cerpass Technology Corporation Address: No.10, Lane 2, Lianfu Street, Luzhu Township City: Taoyuan County 33848 Country: Taiwan, R.O.C. is authorized to apply for Certification of the following product(s):

Product description: Dual Catchmon Type designation: DC-1218 Trademark: MEGACOM on our behalf. Date: Jan, 25, 2019 City: Taipei City Name: Kevin Lai Function: Manager Signature: - _swavscsnsaneasemaronssngeovenen j y, ee ee Pa Re GA aah cee 22020 Le ase Serf-02-4

(1): Required for FCC application L

(2): For FCC it must be the Grantee Code owner or the authorized agent. RF_160, Issue 02