FCC ID: 2AFKNF316W Flex Wireless Charger

spmigen SteadiBoost Flex Wireless Charger q Qi Certified if? "intelligent Power Technology vr ControlHeat Technology (Overheat Protection)

& controlLight Technology CS) Controlslip Technology smart ic chip Protection F316W User Manual irk ee Ul IB USB Power Adapter o USB Cable cate. USB Type-C Port 1. Plug in USB power adapter to power outlet. 2. Connect the USB cable with the USB power adapter and high-speed wireless charger. 3, After LED indicator flashes blue and red once, the charger enters into standby mode. rr De The blue LED indicator light will automatically turn off after 60 seconds of intial charging. Ifyou detach a charging smartphone from the charging pad, the blue LED will turn off and go into standby mode. 4 ak eu Le y Both vertical and horizontal positioning of your smartphone could be charged. LED Indicator Display Status LED LED flashes blue and red once Initial power-on eee

(On standby LED off While charging LED turns blue for 60 seconds and tums off When foreign material isdetected Rea ted When other abnormality isdetected LED flashes blue and red alternatively.

* LED display function for comfortable sleep. ControlLight Technology will turn off the LED after 60 seconds of initial charging. a

*When an abnormality is detected:

Adjust the position of the smartphone.

*When foreign material (metal) is detected:

Check to see ifthere is any foreign material (metal) stuck between the smartphone and the wireless charging pad. 1. Do not exert excess force on the product. 2 Do not disassemble the product or let it come into direct contact with heat or water. 3.Be careful when using the product in a hot or humid, environment as it may damage the circut. 4, Amagnet may cause the product to break or malfunction; do not place magnetic chip card (eID cards, credit cards) near the product. 5. Medical devices (e.g. pulse measuring device, hearing aid) may indirectly interfere with the product; keep them atleast 20cm away from the product. 66. Keep away from children, The product image herein is provided as an example and user's uide for the portable high-speed wireless charger and may differ from the actual product. For smartphones that do not support wireless charging, you need to.usea separate wireless charging patch or wireless charging case. B Class Equipment (Equipment for home use)

** This product is mainly for home use with radio wave acceptability registration; therefore, it can be used in all areas. Product Specifications

+ Input: 5V=3A 9V=2A 12V=1.5A

+ Output SW/75W/10W/ 15W

+ Dimensions: 5.64 x 2.76 x 0.69in (143.2 x 70.2 x 174mm) Weight: 45902 (130g) Charging Efficiency: = 72%

+ AC/DC Adapter of EU/UK:

Model: (EU)TYOUOIQCE / (UK)TYOU01QCG

~Input: AC 100-240V~ 50/60Hz 0.8A Output: DC 3.6V465V 3A;0C 6.5V-9V 2A;0C9V-12V 158 The Cable USB: 120mm Type-C

+ frequency:

~ Operation Frequency: 112.115-128.077 kHz (Declaration for EU)

~Max. RF power transmitted: -0.67dBuA/m @10m (Declaration for EU)

+ DOC: Hereby, [SPIGEN KOREA CO,, LTD] declares that the radio equipment type [F316W] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.spigen.com. 7 FCC Part 15 Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

<CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the produc. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to cortect the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna,

~ Increase the separation between the equipment and receiver.

= Connect the equipment into an outlet on a circuit different from that to which the receiveris connected

= Consult the dealer or an experienced radio/TV technician for help, This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Ths transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ISED Regulatory Compliance This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur exempt de licence contenu dans le prsent apparel est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. L'appareil doit accepter tout brouillage radiolectrique subi, mme sile brouillage est susceptible den compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrdl. Cet metteur ne doit pas tre situ ou fonctionner conjointement avec une autre antenne ou un autre metteur. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Connecter a ladaptateur dali tation Adaptateur USB Cable USB Port USB Type-C 1. Brancher l'adaptateur dalimentation USB a la prise de courant. 2. Connecter le cable USB entre ladaptateur dalimentation USB et le chargeur rapide sans fil. 3. Le chargeur se met en mode veille aprs que le voyant LED clignote une fois en bleu et une fois en rouge. 10

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 Internal Photos for SZEM1908017544CR FCC ID: 2AFKNF316W SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 WPC Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 7 External Photos for SZEM1908017544CR FCC ID:2AFKNF316W SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 7 EUT Constructional Details 1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 7

SteadiBoost Flex Wireless Charger F316W_art work USB IP tet ean, 4p expt cp tour Sacy Soma Ty imac coe eel mat eat CE ate 40mm q SteadiBoost Flex Wireless Charger F316W Input :SV=3A 9V=2A 12V=1.5A Output : SW/7.5W/10W/15W iP Intelligent Power Technology

} ControlHeat <*> ControlSlip Technology Techonolgy ControlLight Smart IC Chip eam Technology Protection Registration No: oY we R-R-sgp-F316W RoHS FCCID: 2AFKNF316W IC: 24998-F31ew This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Made in China wwwspigen.com V.10 US 19.08.30 WwW19 Scale 200%

Black Body PANTONE Cool Gray 10C AT a denatir|

Spigen Korea Co., Ltd. To: SGS North America Inc, 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Spigen Korea Co., Ltd. Spigen HQ-A, 446, Bongeunsa-ro, Gangnam-gu, Seoul, 06153, South Korea Regarding: Confidentiality Request regarding application for FCC iD: 2AFKNF316W LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released fo the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORTTERMCONFIDENTIALITY, Additionally, the applicant requests the following documents be held confidential until the device is marketed or Odays from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 DO1 Confidentiality Request Procedures. External Photes Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Woo Sang-Hyup Title: Team Leader Signature:

On behalf of Company: SpigenKorea Co., Ltd. Telephone: +82-10-9909-5102 E-mail: shwoo@spigen.com Spigen Korea Co., Lid. Date: 2079-08-22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AFKNF316W To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Jing Song in SGS-CSTC Standards Technical Services Co., Ltd. (SGS} Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Spigen Korea Co,, Ltd. This authorization is valid until further written notice from the applicant. Print Name: Woo Sang-Hyup Title: Team Leader Signature:

On behalf of Company: Spigen Korea Co., Ltd. Telephone: +82-10-9909-5102 E-mail: shwoo@spigen.com

FCC ID: 2AFKNF316W Justification for WPT RF Exposure Evaluation Consideration Dear Examiner, Theres a WPT device as below wed like to be authorized per KDB 680106 D01. Company:

Model Number:

Spigen Korea Co., Ltd. F316W As addressed in KDB 680106 D01 RF Exposure Wireless Charging App v03section 5, Inductive wireless power transfer applications with supporting field strength results and meeting all the 6 following requirements are not required to submit a KDB inquiry for a PAG for equipment approved using certification to address RF exposure compliance. Here is a briefing about the device. KDB 680106 D01 Section 5 Requirements:

1) Power transfer frequency is less that 1 MHz 2) Output power from each primary coil is less than or equal to 15 watts. 3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. 4) Client device is placed directly in contact with the transmitter. 5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). 6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Justification Yes, 113.30kHz to 137.66kHz Yes, 15W Max. Yes, includes only single primary and secondary coils. Yes Yes, for desktop application, its mobile condition. Yes The strengths at 15cm surrounding the device are demonstrated to be less than 50%

of the MPE limit. Sincerely, Signed By: Jing Song On behalf of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch under written authorization from Grantee Email: jing.song@sgs.com Date: 2019/09/18

Spigen Korea Co., Lid. Date: 2079-08-22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AFKNF316W To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Jing Song in SGS-CSTC Standards Technical Services Co., Ltd. (SGS} Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Spigen Korea Co,, Ltd. This authorization is valid until further written notice from the applicant. Print Name: Woo Sang-Hyup Title: Team Leader Signature:

On behalf of Company: Spigen Korea Co., Ltd. Telephone: +82-10-9909-5102 E-mail: shwoo@spigen.com