FCC ID: 2ATF5T-3 True Wireless Earbuds

ONYX TWS EARBUD QUICK START GUIDE IMPORTANT SAFETY Read all instructions before using your earbuds. lmportant: Use of earbuds while operating a vehicle,motorcycle,watercraft or bicycle is not recommended and is illegal in some areas.Check and obey applicable laws and regulations on the use of earbuds while your operating a vehicle. Be careful and attentive while driving.Stop listening to your audio device if you nd it disruptive or distracting while operating any of vehicle or performing another activity that requires your full attention. Never expose your earbuds to high temperatures, extreme cold or submerse in water. lf the product overheats, has been dropped or damaged or has been dropped in a liquid, discontinue use. In order to avoid the risk of electric shock, never attempt to open your earbuds or repair them, consult a certied professional. Your earbuds are not to be used by children without adultsupervision. Do not clean the earbuds with harmful chemicals or detergents. MAINTENANCE Store the earbuds. When youre not using the earbuds, store them in the charging case. Close the charging case to help preserve battery life and keep the charging case free of debris. When storing the earbuds for an extended period of time (more than 4 weeks), make sure they are stored at room temperature and the charging case battery level is greater than 40%

Clean the earbuds and charging case. Eartips- Remove the tips from the earbuds and wash them with a mild detergent and water. NOTE: Make sure you thoroughly rinse and dry the tips before re-attaching them to the earbuds. Earbud nozzles- Wipe only with a dry, soft cotton swab or equivalent. CAUTION:

Never insert any cleaning tool into the nozzle. Charging contacts (on earbuds) and charging pins (in charging case)- To prevent rusting, wipe with a dry, soft cotton swab or equivalent. Charging case- Wipe only with a dry, soft cotton swab or equivalent. GETTING STARTED CHARGING YOUR CASE CHARGING YOUR EARBUDS 1 Micro USB charging port 2 Charging case power digital display 3 Left earbud LED indicator 4 Left control area 5 Right earbud LED indicator 6 Right control area Charge on the go charging case, with the included micro USB cable for 2-3 hours. Do not charge longer than suggested time. Do not charge overnight. When digital display shows 100, charging case is fully charged. L Left Earbud

R Right Earbud Pause/Play/Answer Call/End Call, Next Track,Volume+/-

1 2 R L 5 6 3 4 Put the two earbuds into the charging case, put down the lid, the light is keeping going up. When the light o, earbud batteries are fully charged. MONO MODE

(SINGLE EARBUD USE) STEREO MODE

(DUAL EARBUD USE) PAIRING OPERATING BLUETOOTH EARBUDS FCC STATEMENT Open the charging case, remove the earbuds. ONYX TWS EARBUD The earbuds will automatically turn on and pair, the matching process takes about 5 seconds (the indicator light is, both earbuds blue lights ash, after the successful pairing, only one earbud ashes red and blue). Once Earbuds are linked together you may proceed to pairing with your mobile device. Enable Bluetooth search mode on your mobile device and search for pairing name ONYX TWS EARBUD and select it on your mobile phone. Once the earbuds are successfully paired a notication will sound. Now you can enjoy yo r true wireless Bluetooth Earbuds. u Function Power On Power O Play/Pause Answer Reject Earbuds Power On Link Mode Paired Successfully Power O Earbuds Charging Fully Charged in Case Operation Touch (4) or (6) for 3 seconds Touch (4) or (6) for 5 seconds Single touch (4) or (6) Single touch (4) or (6) Touch (5) or (7) for 2 seconds LED indications (4) & (6) Red and Blue LED will ash altemately Flashing Blue + Red Flashing Blue LED O Light Red Light O Charging Case See CHARGING YOUR CASE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution:

Changes or modications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement Caution:

This Transmitter must be installed to provide a separation distance of at least 5 mm from all persons. FCC Statement:

"This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help."

Remove earbud from charging case. Once earbud is powered on, proceed to PAIRING.

*Note: Once earbuds have been initially paired successfully with your mobile device they will automatically pair the next time they are powered on.

Model: ONYX Battery Capacity: 300mAh Input: 5V 500mA FCC ID: 2ATF5T-3 Made in China Bottom Model: ONYX Battery Capacity: 300mAh Input: 5V 500mA FCC ID: 2ATF5T-3 Made in China PRODUCT PRINTING TRUE WIRELESS EARBUDS 19.2mm Model: ONYX Battery Capacity: 300mAh Input: 5V 500mA FCC ID: 2ATF5T-3 Made in China 16.5mm PANTONE COOL GRAY 10 C

Authority to Act as Agent Date: 2022-08-03 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern:

I appoint TV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with SRP Companies 85 Rio Grande Drive, SECOND FLOOR CASTLE ROCK, Colorado, United States. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date:

2022-08-03 Agreement is valid for 12 months from the above date. By:

(Signature) Bright Zhang

(Print name) ____ Certification Engineer _____

(Title)

+86 18012788972

(Telephone) On behalf of:

SRP Companies

(Company Name) Page 1 of 1

Standard Form Sample Request for Confidentiality Letter Date: ___8/3/2022_____ Subject: Confidentiality Request for FCC ID: 2ATF5T-3 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent n/a n/a Exhibit Block Diagrams Internal Photos ***

Operation Description/Theory of Operation Tune-Up Procedure Schematics Users Manual***

Test Setup External Photos SRP Companies has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** PAG only) Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___( 180) ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

/ Certification Engineer Bright Zhang

(Signature/Title)

(Print name) MS-0044715 Page 1 of 1 Revision 0