FCC ID: 2AGZ3S01411 Titan 24 GHz Radio

POWER PO PI MGMT P2 PS GND, -48V, RTN 2.5G, PSE 2.5G RS-232 1GE 10GE Model: $01411_ FCC ID: 2AGZ3S01411 Assembled in USA Fe Ww Contains FCC IDs: TK4WLE1216V520, HED-ML60MDSB vy STARRY NOTICE: Use caution when operating equipment. Radio frequency fields may exceed the FCCs v guidelines for extended human exposure if improperly operated. Maintain a safe distance from equipment. Limit direct contact unless necessary for installation and maintenance.

FCC ID 2AGZ3S01411 Location of the Unit Label Figure 1. Unit Label (reference example Starry Part Number 950-0048) is located behind the connector panel cover that is easily accessible without tools by loosening 2 large knobs and rotating swing bolt. 1 FCC ID 2AGZ3S01411 Location of the Unit Label Figure 2. Panel rotated to open position. Label show as installed. 2

Application Examiner Re: Class II Permissive Change Application FCC ID: 2AGZ3S01411 3 June 2022 Dear Telecommunications Certification Body Reviewer:

A request is made for a Class II permissive change of presently authorized equipment listed under FCC ID: 2AGZ3S01411. The request is to add the Titan 24 45 product as authorized equipment under FCC ID: 2AGZ3S01411. The difference between the original authorized equipment, Titan 24 90, and the requested authorized equipment, Titan 24 45, is a change in the antenna. The antenna for Titan 24 45 product has a beam width of 45 degrees. The beam width for the Titan 24 90 antenna is 90 degrees. The same radio hardware circuitry is used on both radios with the exception of the antenna lens, which modifies the beam width from 90 degrees to 45 degrees. The patch array PCB is also the same for both radios. Testing was completed as shown in the test report in order to verify compliance with the FCC requirements. Thank you. Sincerely, Robert White Senior Director, Product Realization and Mechanical Engineering 38 Chauncy Street, Suite 200 Boston, MA 02111 38 Chauncy Street, 2nd Floor, Boston, MA 02111

Starry, Inc. August 4, 2022 Attention: Application Examiner Request for Confidentiality Class II Permissive RE:

Applicant: Starry, Inc. FCC ID: 2AGZ3S01411 To Whom It May Concern:

Pursuant to 47 C.F.R. 0.457(d) and 0.459, Starry, Inc. (Starry) hereby requests short-term and long-term confidential treatment, as described below, for certain exhibits submitted in support of Starrys application for certification of the equipment associated with the above-referenced FCC identifier. This equipment represents a unique technological implementation that contains certain intellectual property that would significantly harm Starry if revealed to its competitors or to parties that seek to replicate Starrys equipment. Short-Term Confidentiality In order to avoid premature release of sensitive information prior to the marketing and public release of the equipment covered by this equipment certification application, Starry requests that the Commission treat the following exhibits as confidential until 45 days after the date the Grant of Equipment Authorization is issued. Test setup photos Disclosure of the exhibits for which Starry seeks short-term confidential treatment during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and significantly diminish the value of our investment in research and development. Long-Term Confidentiality Starry requests that the Commission treat the following exhibits as permanently confidential:

Detailed Operational/Functional Description Parts list Internal photos The exhibits for which Starry requests long-term confidential treatment all contain confidential, proprietary technical information that the Commission protects from disclosure as a type of record that is not routinely available for public inspection.1 Starry has invested considerable time and materials in research and development to produce the referenced product. To protect its investment, Starry does not release this information in the ordinary course of its business because doing so would result in substantial competitive harm to Starry. Disclosure of these confidential exhibits to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by Starry and could even reveal information about Starrys unique economic model. Among the exhibits for which Starry seeks long-term confidential treatment are internal photos. It is appropriate to accord such treatment to the internal photos submitted for two reasons. First, some of these 1 47 C.F.R. 0.457(d). 1(2) photos are scanning receiving internal photos, which, by rule, the Commission does not make available for inspection.2 Second, long-term confidential treatment for all other internal photos is also warranted because the referenced product is a non-consumer device that is not sold to end users, nor is it accessible to the general public. These devices are mounted on the top of a large tower or in a locked area, such as a rooftop, and are only serviceable by professional, designated Starry technicians and partners under a Non-Disclosure Agreement (NDA). An example of the NDA between Starry and its technicians and partners is provided herein. Starry also seeks long-term confidential treatment for the user manual of the referenced product. The manual for this product contains confidential proprietary technical information and is only shared outside the company with professional, designated Starry technicians and partners under an NDA. The manual is not provided to end users because this is a non-consumer device that is not available for sale and end users of the device do not have access to it and cannot service it. Therefore, long-term confidential treatment of the user manual is also warranted. Sincerely, Robert M. White Senior Director, Product Realization and Mechanical Engineering Starry, Inc. 2 See 47 C.F.R. 0.457(d)(1)(ii) (Portions of applications for equipment certification of scanning receivers and related materials will not be made available for inspection.). 2(2)

Starry, Inc. June 3, 2022 Federal Communications Commission 445 12th Street SW Washington, DC 20554 Subject:

Limited Agency Agreement Starry, Inc. FCC ID: 2AGZ3S01411 Class II Permissive To Whom It May Concern:

We, Starry, Inc., hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number 2AGZ3S01411 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is June 03, 2022. The Limited Agency Agreement expires on July 23, 2022, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Robert M. White Senior Director, Product Realization and Mechanical Engineering 38 Chauncy Street, Suite 200 Boston, MA 02111