FCC ID: Q6WBOT251 Sensor pad

Seat belt detection kit

(To be pasted on the inside of the drivers seat belt) Stick on the inside of the driver's drivers seat belt slot 7 8 9 Buckle the drivers seat belt The display Bi once to indicate the seat belt is buckled 3 6 Stick on the inside of the driver's seat belt slot 4 5 Buckle the drivers seat belt The display Bi once to indicate the seat belt is buckled 7 8 Display will Bi twice immediately to enter working mode The display will flashing in turn with red & green lights until baby left the car seat or the display is turn off. 5. Baby is remained on the car seat after unbuckle the drivers seat belt:

2 3 Unbuckle the drivers seat belt The display Bi once to indicate the seat belt is unbuckled 1 4 The display will flashing in turn with red & green lights until baby left the car seat or the display is turn off. 7. Baby didnt sit on the car seat more than 15 minutes after ACC ON:

If sensor pad in low battery status ACC ON, and baby sit on the car seat, when the system detectsthe sensor pad is in low battery status, the display will warning and yellow light flashing for 3 times, then the light will return to green, and the system will back to the working mode. If seat belt detection kit in low battery status Buckle the seat belt, when the system detects seat belt detection kit is in low battery status, the display will warning and yellow light flashing once, then the light will return to green, and thesystem will back to the working mode. The display will Bi twice with green light flashing, then enter the next programing. 1 Buckle the drivers seat belt, then unbuckle it The display will "Bi" once with yellow light flashing, then enter the next programing After all parts are programmed, hold SET button, Then the display will warning to save and exit the programming mode. Note: 1.Only 2 sensor pads and 1 seat belt detection kit can be up to programmed. 2.If there is no operation within 2 minutes, the system will exit the programming mode automatically. DC 3V (2V~3.6V

>20N DC 3V (2V~3.6V Seat belt detection kit 3. Sensor belt detection kit not work The sensor belt detection kit battery is low, please change to new sensor belt detection kit. The display and sensor belt detection kit are not programmed. The seat belt buckles with inner wall thickness 7mm will affect the use of this part. The vehiclewith the CIG lighter has the electricity after flame out, must be equipped with seat belt detection kit. 1. This system is designed for reminding drivers to take their baby with them whenever they leave the car. negligence. 2. STEELMATE does not take any responsibility for any accident happen because of 3. This system is designed for a reminder purpose only, not a lifesaver. 4. Before using this system, please read the manual carefully. The system is also suitable for the vehicle with the CIG lighter has the electricity after flame out, but must be equipped with seat belt detection kit. 2~36kg. The sensor belt detection kit is only suitable for seat belt buckles with inner wall thickness 7mm. If not, may lead to seat belt buckle monitoring failure. 4. 5. 9

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2022/7/19 Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Q6WBOT251 Model name BSA-1U For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Name/Title Ben Fang / Engineer Company:

Address:

STEELMATE CO., LTD. Steelmate Industrial Park, Heping Street, Dongfu Road, Dongfeng Town, Zhongshan City, Guangdong, P.R. China 86-76022613886(256) 86-760-261-0886 benfang@steel-mate.com Phone:

Fax:

E-Mail:

Sincerely,

STEELMATE CO., LTD. Steelmate Industrial Park, Heping Street, Dongfu Road, Dongfeng Town, Zhongshan City, Guangdong, P.R. China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2022/7/19 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: Q6WBOT251 including the signing of all Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect documents related to these matters. as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Ben Fang / Engineer STEELMATE CO., LTD. Steelmate Industrial Park, Heping Street, Dongfu Road, Dongfeng Town, Zhongshan City, Guangdong, P.R. China 86-76022613886(256) 86-760-261-0886 benfang@steel-mate.com Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail: