FCC ID: Q6WLWTX3300-BT Smart Control

smartcontrol

12.412.4

-70 00:00 Doors Unlocked TX3300-BT User Guide This button will send a START command to your vehicle remote starter. The vehicles engine will start and run for the preset time. The timer will begin to count down from the preset runtime of the remote starter. This button will send a STOP command to your vehicles remote starter. The vehicle's engine will shut down and the runtime status will change to 00:00:00 once the action has been completed. This button will LOCK and/or ARM your vehicle. Your vehicle MUST be equipped with a power door lock system for this feature to work. The door lock status will change once this action is completed. This button will UNLOCK and/or DISARM your vehicle. Your vehicle MUST be equipped with a power door locking system for this feature to work. The door unlock status will change once this action is completed. 12.4 This icon will display the vehicle's battery voltages. Displays the current temperature inside your vehicle. read from the antenna. This button will allow you to access the AUXILIARY functions. Some of the functions could be Motorized Lift Gate, Trunk Release, Power Sliding Doors, Rear Defrost, ETC. See your retailer for more details. CONFIGURATION MODE COMMAND x1 Lock & Arm x2 Quick presses Unlock & Disarm 3s 3s 5s _ _ Start Extended runtime Stop COMMAND _ _ Micro USB battery charging port DESCRIPTION Press and release button. Secures your vehicle by locking the doors and arming the factory alarm Press and release button 2 times within 2 seconds. Provides the access to your vehicle by unlocking the doors and disarming the factory alarm Press and hold the button for 3 second

(until a long chirp is heard) and release. This will send the command to start the engine Quick chirp.1 flash of the green LED 2 quick chirps, 2 flashes of the green LED 1 short beep, 2 quick chirps, 2 flashes of the green LED Press and hold the button for 3 second until a long chirp is heard and release 1 long beep, 3 quick chirps, 3 flashes of the green LED Press and hold for 5 seconds until the 2 quick chirps 1 long beep, 2 long chirps then 2 flashes of the green LED Command not received Transmit command 1 long chirp Blue LED blinks For more detailed instructions, please consult the HELP section of the SmartControl App. Serial number sticker here Step 1: App & account setup Search on App Store or Google Play Store for Smart Control. Download the Smart Control smartphone app. Once completed, launch the Smart Control app on your device. Click the "Create an Account", fill in the form and create your account. Once done, log into the app using your email address and new secure password. Step 2: Add a system Click on the (+) sign in the bottom right corner of the Smart Control app screen to add your system to your account. Scan the QR Code located on the antenna to add the device in the app. Your device is now linked. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and; (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generatesand can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the use's authority to operate the equipment. LoRa Radio:

Operating frequency: 911.85MHz BLE:

Operating frequency: 2402~2480MHz Battery:

Type: Lithium Ion Capacity: 200mAh Voltage: 3.7V Charge Voltage: 5V USB For terms and conditions, see them under the main menu in the app. RFK6000 User Guide 201119

FCC ID LABEL:

Width:2cm FCC ID: Q6WLWTX3300-BT Product name: Smart Control Model No.: TX3300-BT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference

(2)This device must accept any interference received, including interference that may cause undesired operation. Long:3cm Label Location:

<Steelmate Co., Ltd.>

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Subject; Request for Long Term Confidentiality FCC ID:Q6WLWTX3300-BT Date: Dec. 19, 2019 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ben Fang Title: Engineer

Steelmate Co., Ltd. Letter of Authorization Company: Steelmate Co., Ltd. Address: Steelmate Industrial Park, Heping Street, Dongfu Road, Dongfeng Town, Zhongshan City, Guangdong, P.R. China 528425 Product Name: Smart Control Model Number: TX3300-BT FCC Identifier: Q6WLWTX3300-BT We authorize MiCOM LabsInc, 575 Boulder Court, Pleasanton, California94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM LabsInc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Ben Fang Title:Engineer Signature of applicant:

Date: Dec. 19, 2019