FCC ID : PJDSV-01-TX JOB # : 85AZH1 EXHIBIT # : 10 SV-01-TX 2.4G Video/Audio Wireless Transmitter Important Safety Precautions THIS DEVICE COMPLES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS, (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION, NOTE : THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. Index 1. Introduction 2. Description of Box Contents 3. Connection and Setup 4. Operation 5. Specification Introduction 1. WL2001Tx is an wireless video sender using the most world-wide popular 2.4Ghz ISM band and design with high flexibility make SV-01-TX a very versatile device. It can transmit a wide band composite video and two audio channels signals up to 100 meters. Features :
X 1 pc X 1 pc X 1 pc X 1 pc X 1 pc X 2 pcs X 1 pcs 2. Description of Box Contents
- Mini Transmitter main unit
- AC adapter 120VAC to 12VDC
- Power spilt cable
- Mounting screw
- Anchor
- Warning decals
- Audio/Video RCA cable 3. Connection and Setup Connectors and switch Switch/Selector 1. Channel selector (CH1 CH4) 4 way slide switch 2. Power on/off switch 3. Power Indicator Input Jack/Terminal 1. DC input jack 2. RCA Video input jack 3. RCA Audio input jack How to wall mount the Transmitter How to connect your A/V equipment to Transmitter How to connect your camera to Transmitter
4 Operation You can receive A/V signal from the Transmitter on several Receiver in remote location. 1. Be sure to set the power switches on the transmitter and receiver to the OFF position before proceeding use of Y-spilt power cable to share the DC power with the following steps. 2. Connect all video/Audio cable to the transmitter and receiver. 3. Connect all power source to the transmitter and receiver. 4. Select a channel 1 4 on the transmitter 5. Switch on the transmitter and receiver 6. Search the channel 1 4 on the receiver using the channel selector switch. ( All receiver and transmitter must have the same channel), you should see the Picture on the receiver. 7. Select another channel on transmitter and receiver if necessary for better picture quality. 8. Adjust the antenna as necessary AC adapter DC 12V 500mA output 150 mA typ. X 1 X 1 5. Specification / Features
Power Supply Current consumption :
Channel Frequency
Channel Selection Modulation System Video Channel Video Input level Audio Channel Audio Input level Transmission channel :
Antenna type LED indicator Dimensions Weight 2411 - 2473 Mhz 4 Channel FM modulation
: 1
1Vpp @ 75 Ohm 1 1 Vpp @ 600 Ohm Video Audio Dipole Power
98 X 62 X 40 mm 98 g