|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6
|
Effective |
2023-03-15
|
|
1 2 3 4 5 6
|
2022-07-27
|
|
1 2 3 4 5 6
|
2022-07-18
|
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
Sun Cupid Technology (HK) Ltd.
|
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0024055386
|
|
1 2 3 4 5 6
|
Physical Address |
16/F, CEO Tower, 77 Wing Hong St, Cheung Sha Wan, Kowloon
|
|
1 2 3 4 5 6
|
16/F, CEO Tower, 77 Wing Hong St
|
|
1 2 3 4 5 6
|
Hong Kong, N/A
|
|
1 2 3 4 5 6
|
Hong Kong
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6
|
TCB Application Email Address |
c******@micomlabs.com
|
|
1 2 3 4 5 6
|
b******@baclcorp.com
|
|
1 2 3 4 5 6
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
1 2 3 4 5 6
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6
|
Grantee Code |
2ADIN
|
|
1 2 3 4 5 6
|
Equipment Product Code |
S6303L
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6
|
Name |
D****** S****
|
|
1 2 3 4 5 6
|
Telephone Number |
+852-********
|
|
1 2 3 4 5 6
|
Fax Number |
+852-********
|
|
1 2 3 4 5 6
|
E-mail |
d******@suncupid.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5 6
|
Firm Name |
Sun Cupid Technology (HK) Ltd.
|
|
1 2 3 4 5 6
|
Physical Address |
China
|
|
1 2 3 4 5 6
|
Hong Kong
|
|
1 2 3 4 5 6
|
E-mail |
d******@suncupid.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 5 6 | Yes |
| 1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 | Equipment Class | PCE - PCS Licensed Transmitter held to ear |
| 1 2 3 4 5 6 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE Smart Phone |
| 1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 | Modular Equipment Type | Does not apply |
| 1 2 3 4 5 6 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 6 | Class II Permissive Change |
| 1 2 3 4 5 6 | Original Equipment |
| 1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 | Grant Comments | HAC Rating M3T3-2011 Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in B2/B4/B25/B66, 1.4/3/5/10 MHz BW modes in B5/B12, 5/10/15/20 MHz BW modes in B7/B41/B71, and 5/10/15 MHz BW modes in B26. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 0.18 W/kg, 1.06 W/kg, 1.49 W/kg, and 1.49 W/kg, respectively. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. |
| 1 2 3 4 5 6 | HAC Rating M3T3-2011
Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in B2/B4/B25/B66, 1.4/3/5/10 MHz BW modes in B5/B12, 5/10/15/20 MHz BW modes in B7/B41/B71, and 5/10/15 MHz BW modes in B26. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 0.18 W/kg, 1.06 W/kg, 1.49 W/kg, and 1.49 W/kg, respectively.
This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. |
| 1 2 3 4 5 6 | Output power listed is peak conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions is 0.36 W/kg, 0.13 W/kg, and 1.06 W/kg, respectively. This device supports 20 MHz and 40 MHz bandwidth modes. |
| 1 2 3 4 5 6 | Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in B2/B4/B25/B66, 1.4/3/5/10 MHz BW modes in B5/B12, 5/10/15/20 MHz BW modes in B7/B41/B71, and 5/10/15 MHz BW modes in B26. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 0.18 W/kg, 1.06 W/kg, 1.49 W/kg, and 1.49 W/kg, respectively.
This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. |
| 1 2 3 4 5 6 | Output power listed is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions is 0.34 W/kg, 0.70 W/kg, and 1.49 W/kg, respectively. This device supports 20 MHz and 40 MHz bandwidth modes. |
| 1 2 3 4 5 6 | Output power listed is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions is < 0.10 W/kg, < 0.10 W/kg, and 0.81 W/kg, respectively. |
| 1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6
|
Firm Name |
CCIC Southern Testing Co., Ltd
|
|
1 2 3 4 5 6
|
Shenzhen Accurate Technology Co., Ltd.
|
|
1 2 3 4 5 6
|
Name |
Z******** S******
|
|
1 2 3 4 5 6
|
L******** Z******
|
|
1 2 3 4 5 6
|
Telephone Number |
86-07********
|
|
1 2 3 4 5 6
|
+86-7********
|
|
1 2 3 4 5 6
|
E-mail |
z******@ccic-set.com
|
|
1 2 3 4 5 6
|
q******@atc-lab.com
|
|