Instruction of use BASIC INFOMATION Product Name Model#
Barcode Color PACKING INFORMATION Min. Package Packing QTY Packing Size G.W. 3D Sublimation Wireless Mouse T69 SFP-T69-K SFP-T69-G SFP-T69-P SFP-T69-Y 23523 Black 23522 Green 23524 Pink 23527 Yellow 20 PCS/BOX 100 PCS/CTN 50 x 33 x 35 CM 11.50 KG Packing Contents 2.4G wireless mouse x 1, USB receiver x 1, Instruction for use x 1 TECNICAL SPECIFICATION Operating frequency Rated Voltage Working Current Connector Battery Specification Channel Effective distance DPI Support O/S 2402--2480 mHz 3V
< 9mA USB receiver 2 x AAA batteries 40 channels 10 M 1000-1600 DPI Windows XP/Vista/7/8/10,. USB receiver installation steps:
1. Take the USB receiver out of the battery compartment. 2. Plug the USB receiver into your PC, it will install automatically. 3. After installation, the power indicator light will be on and you can use the mouse freely. Battery installation steps:
1. Open the cover of the battery compartment in the bottom of the mouse. 2. Insert 2*AAA battery (make sure of the correctness of anode and cathode). 3. Close the cover of the battery compartment. This device may not cause harmful interference, This device must accept any interference received, including interference that may cause undesired operation. Please be aware that the device complies with part 15 of the FCC rules. Operation is subject to be the following two conditions:
1) 2) SUN-FLY INTERNATIONAL BUSINESS DEVELOPMENT LTD. www.sun-fly-sublimation.com Warning: changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to Instruction of use operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device may not cause harmful interference, This device must accept any interference received, including interference that may cause undesired operation. Please be aware that the device complies with part 15 of the FCC rules. Operation is subject to be the following two conditions:
1) 2) SUN-FLY INTERNATIONAL BUSINESS DEVELOPMENT LTD. www.sun-fly-sublimation.com