all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 475.70 KiB | / September 01 2017 | |||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | / September 01 2017 | ||||||
1 | Internal Photos | / September 01 2017 | ||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | / September 01 2017 |
1 | User Manual | Users Manual | 475.70 KiB | / September 01 2017 |
ST500 User Manual Suntech International Ltd. 1. Intro oduction ST50 00 User Man nual This doc cument desc cribes featur es, protocols s and detail operation o of ST500. If there the cont special b is another tents of the buyer. operation d document escription d is different w document fo with this, cu r special bu ustomizing d uyer to custo document sh omize or mo hould be ap odel and plied for erview consists of G in purpose cally. can control o peration M Mode GPRS, GPS an of device re nd event pa eports gettin rts. ng GPS posi tion and ot her informs of vehicle t to server or check con nnected line s and suppo ort additiona al functions. vice has 3 op ving king ergency : On device send peration mod
: Driv
: Park nce panic bu s emergency des, driving, ving status w king status t utton is On o y reports un parking and when ignition hat starts if or any other ntil A1 times d emergency y. n is on. ignition is o r status as pe or receiving ore than T1. off during mo
. er designed. g server ackn nowledge. eport ormation at p orts GPS an d some info ome alerts, for examp VL sends so
. ted input line e and so on distinguishe es all report ts with 6 ty
. nd response eports when can store re capacity is up to 2,00 1500 bytes eports) and port is buffer and new rep eporting con ndition is rec an increase is capacity c pe of reports s has priority mand Respo ncy Comm n reporting 0 status rep as comman red when th covered, dev if it is neede y, and priori onse Alert route (For e ports, 50 em nd response e buffer is fu vice starts se ed. ty is as belo t Status R predefined i le, moveme nterval, dep ent at the p ending on th parking con he current m ndition, chan modes. nging of ypes, Status report, em ergency, eve ent, alert, a alive and example, GP mergency re e. In case of ull and new ending all bu PRS conditio eports, 50 a status repo status repor uffered repo on) is not su lert reports orts, oldest rt enters (FIF rts. uccessful.
(include report is FO). ow. Report Ali ve (Lowest) 2 2. Ove Device c The ma periodic Device c 2-1. Op The dev
** Driv
** Park
** Eme The d 2-2. Re AVL rep Also, AV connect Device comman Device c Storage event re erased a When re Also, thi Each typ Emergen rst to be sen nt after recov vering GPRS S condition. ST50 00 User Man nual hanged by G GPRS or SM S, and some e control can n be realized d also in meter ce can be ch described i n Chapter 4
. described here;
s two step the vehicle s of power is parked. r-down, Sle ep and De ep Sleep, f for reducing g power and GPS sta ates. Its help pful to check k error cause e. t lines, 3 inp put lines and d ignition lin e. e by Over Th f device ha ce can upda need to visit escribes at S he Air (FOTA s some err ate internal every vehic SunTech_OTA A) ror or has ROM file b le to downlo A_UA_Protoc to be chan by over the oad the new col docume nged for a air (FOTA), w firmware. nt in detail. new servic remotely v ce to be via GPRS. whether the n. In the ca mmediately. vehicle mo ase that it oves off the notes the preset park unauthorize king bounda ed moving o ary or starts or driving, s driving it sends rotocols are ncy is the fir etting Param ters of devic me way. ndicator icates GPRS atures atures are r Down can proces ption when Emergen 2-3. Se Paramet the sam Detail p 2-4. Fe Key fea
- Power Device consum
- LED In LED ind
- Events s has 2 output Device h
- Updat When F impleme Custome Method
- Parkin Device c without emergen
- Over s Device c
- GPS A Device c te Firmware Firmware of ented, devic ers do not n of FOTA de Antenna Che can alert wh speed can check sp ng Lock can check w ignition on ncy report im peed of vehi cle and send d alert of ov ver-speed to server. ecking en GPS ante enna is disco onnected. 3 Its appl
- Main The dev disconn Its appl
- Batter Device c Its appl 3. Prot All comm Every fil All repo Comma Device I If the co matched Report icable only f for models t that have ext ternal anten nna. ST50 00 User Man nual Power Chec vice can re ected or ma icable only f cking ecognize the ain power dr for battery m e main pow rops below p model. wer and inf form to ser preset value. rver when main powe r line is ry Error Aler rt out battery e can alert abo icable only f for battery m error related model. d on chargin g. tocol Con struction mand and re ed is disting rt string from eports are st guished by s m device is tring and fo emi colon. ended by r (0x0D). llows below format. and message e format (fr rom server t to device) HDR DEV_ID VE ER Field 1 Field 2 Field n Field HDR DEV_ID D VER Field 1
~ n Definition ns Rema ark String 6 char. 02 String SA20 00 + Comm mand type Device e ID of AVL Protoc col Version. This is fixed with 02. Conte ents ID is unique ommand ha d with DEV_I number of s invalid val ID of the un each device ue or DEV_I it. that consist D of the co ts of 6digits. mmand that t is sent by message fo ormat (from device to s server) DEV_ID SW W_VER Fiel d 1 Field 2 2 Field n Definition ns Rema ark String SA20 00 + Report t type HDR Field HDR GPRS or SM MS is not 4 ST50 00 User Man nual DEV_ID D VER Field 1
~ n 6 char. 001 String Device e ID of AVL Softw are version t that the dev vice has. Conte ents 4. Com When t paramet 4-1. Ne mmands he device is ters or acts s received a related oper a command, ration. etwork Par rameters Se etting
, it respond ds with resp onse string and chang es some HDR DEV_ID D VER AUTH AP PN USER R_ID USE ER_PWD SEVER_IP SEVER_ PORT B_ _SEVER_IP B_SE EVER_IP SMS_NO PIN_NO Defin nition Field HDR DEV_ID D VER AUTH APN USER_I ID USER_P PWD SEVER_ _IP SEVER_ _PORT B_SEVE ER_IP B_SEVE ER_PORT SMS_N NO
: S Set network parameters and PIN num mber. Definit SA200N ions NTW U nit Rem Com mark mmand type 6 cha ar. 02 0 /1
/A Strin g Strin g Strin g Strin g Strin g Strin g Strin g Strin g Devi ce ID Proto ocol Version S authentica GPRS PAP(NO in S 0 : PA CHAP(YES in 1 : C Automatic GP A : A In n this case, p U USER_PWD fi tion Synctrack) n Synctrack) PRS set. parameters i eld should b in APN, USE be empty. R_ID and Acce ess Point Na me ID fo or GPRS Acc ess Passw word for GP RS Access Serv er IP Addres ss Serv er Port Back kup Server IP P Address Back kup Server P ort Phon This cond meth ne number w can be us dition is no hod when IP what the dev ed for back t good. Or, P and Port ar vice sends S kup in the
, it can be re empty. o. MS report to area that if GPRS used main n report 5 ST50 00 User Man nual For n no use, it sh ould be emp pty. Strin g PIN Number to release PIN lock if it is e enabled NTW;850000 NTW;Res;850 NTW;Res;850 0;02;0;interne 000;010;0;int 000;010;A1;t et;;;111.111.1 ternet;;; 111 tim.br;tim;t 111.111;8600
.111.111.111 im; 111.111. 0;;;;
1;8600;;;;
111.111;860 00;;;;
not require User ID and d Password, these fields should be e empty. matic GPRS S Set, the dev vice set GPR RS paramete ers automati cally depend ding on inserted, th he device s et AUTH to o 0, APN to o aitelgprs.c com, USER_ _ID and onse string after adding g real GPRS S parameters s when auto omatic GPR S set is PIN_NO O mple>
<exam mand] SA200
[comm
[respon nse] SA200N SA200N s>
etwork does
<notes
** If ne Autom It the inserte For ex USER_P And th selecte matic GPRS S device is se ed SIM. ample, if A PASS to emp he device re ed. Set et to Autom irtel SIM is pty. eports respo 4-2. Re eport Param meter Setti ing HDR DEV_ID V VER T1 T2 T3 A1 SND D_DIST T 4 SMS_T T1 SMS_T T2 SMS_ _PACK_NO ANG LE_RPT RPT_TYPE Defin nition Field HDR DEV_ID D VER T1 T2
: S Set paramete ers related o on report int terval. Definit ions U nit Rem mark SA200R RPT 6 cha ar. 02 Strin g S ec Strin g S ec Com mmand type Devi ce ID Proto ocol Version Inter Rang If 0, vehic rval for send ge : 0 ~ 864 report in p cle starts pa ing status re 00 parking will rking. eport in par king mode be sent on nly one tim e when Inter Rang rval for send ge : 0 ~ 600 ing status re 00 eport in driv ving mode 6 ST50 00 User Man nual If 0, vehic report in d cle starts dri driving will ving. be sent on nly one tim e when T3 A1 Strin g S ec Strin g Inter Rang If 0, eme rval for send ge : 0 ~ 999 emergency rgency state ing status re 9 report will e occurs. eport in eme ergency mod de be sent on nly one tim e when Num gets If 0, mber of attem acknowledg no emergen mpts for em ge from serv ncy report w mergency rep ver will be sent. port until the e device SND_D DIST Strin g T4 SMS_T 1 SMS_T2 2 SMS_PA ACK_NO ANGLE E_RPT Strin g Strin g Strin g Strin g Strin g Me eter Dista Rang If 0, If no reach ance interval ge : 0 ~ 600 status repor ot 0, stats hes predefin l for sending 00 (60km) rt related on report is ned SND_DIS g status repo ort. n moving dis send when ST. stance is disa n traveled d abled. distance S ec M Min M Min Inter rval for send ing keep aliv ve string Inter rval for send ing status re eport in par king mode Inter rval for send ing status re eport in driv ving mode Repo ort No in on e SMS mess sage Deg gree Repo 0 : D Rang ort STT mess Disable ge : 1 ~ 179 sage if its g reater than A ANGLE_RPT. RPT_TY YPE Strin g Set t 0: FIF 1: LIF the type of r FO : First in FO : Last In reporting. First Out. First Out. RPT;850000;
RPT;Res;8500 02;180;120;6 00;010;180;1 60;3;0;0;0;0;0 120;60;3;0;0;0 0;0;0 0;0;0;0;0 rval is set not progres this disconn be sent on big numb ssed for a lo nection by se ly when the er, network ong time. S ending shor device has k may disco o, unit may rt data with no data to s onnect GPR not receive short term. send during T4 interval. RS connecti e command ion because by GPRS. T e GPRS T4 is for mple>
mand] SA200 nse] SA200R s>
report inter unication is ting against e report can
<exam
[comm
[respon
<notes
** If commu protect
** Alive 4-3. Ev vent Param eter Settin ng 7 ST50 00 User Man nual HD DR DE EV_ID VER IGNITIO ON T T1 T2 IN1_T TYPE IN2 2_TYPE IN3_TYPE IN1_CHA AT IN2_ CHAT IN N3_CHAT OUT1_ _TYPE OUT T2_TYPE OU UT1_ACTIVE PULSE1 1_NO PULS SE1_ON P ULSE1_OFF OUT2_ACT TIVE PULSE2_N NO PULSE E2_ON PUL LSE2_OFF IN4_T TYPE IN5 5_TYPE I IN4_CHAT IN5_CHA AT BA AUD Defin nition Field HDR DEV_ID D VER T1 T2 IN1_TY YPE
: S Set paramete er related ev vent. Definit SA200E ions EVT U nit Rem Com mark mmand type 6 cha ar. 02 Strin g Strin g 0 ~
7 S ec S ec Devi ce ID Proto ocol Version Dela y for enterin ng idle mode e after igniti ion goes to off Dela y for enterin ng active mo ode after ign nition goes t to on sing) 0 =
1 =
2 =
3 =
4 =
5 =
6 =
7 = A 13 dete Defa Only can Falling Edge Rising Edge Both Edge (
Falling & Ris Panic Button n n Call1 Button Call 2 Butto n Reserved Anti-Theft B
= Disable ctor. ault = 3. y the device be set to Ca utton Immobilizer that includ all1 Button o r if its act tivated by jammer ded voice op or Call2 But ption (audio tton. o circuit) IN1_CH HAT Strin g 100 0ms Inpu Rang Defa If 0, t1 chattering g time. 9 ge : 0 ~ 999 ault = 3 sec. input1 is no ot checked. 8 ST50 00 User Man nual OUT1_T TYPE 0 ~
5 OUT1_A ACTIVE 0 or 1 PULSE1 1_NO Strin g GPIO 0 =
immobilizer 1 =
Immobilizer 2 = I Auto ac auto matically w when the veh Pulse 3 =
LED Out for 4 =
Buzzer 5 =
& Auto acti tive mean ive ns immobil izer is a ctivated hicle starts p parking. indicating c call status. R Refer 7-2-3. 0 =
1 =
Open when GND when o out1 is activ out1 is activ ve ve Pulse Rang If pu e number w ge : 0 ~ 999 ulse no is 99 hen out1 typ 9 99, pulsing r pe set to pu ulse. runs perman nently. PULSE1 1_ON Strin g 100 0ms Activ Rang It sh ulse1 ve time of pu 9 ge : 0 ~ 999 ould be set with even n number. PULSE1 1_OFF Strin g 100 0ms BAUD 0 ~
4 Inact Rang It sh tive time of ge : 0 ~ 999 ould be set pulse1 9 with even n number. en extra eve nts support RS232. Its a Baud 0 =
1 = 4 2 =
3 =
4 =
5 =
If the available whe d-rate No use 4800bps 9600bps 19200bps 38400bps 115200bps e device doe es not suppo ort RS232, it t should be 0 0. 9 ST50 00 User Man nual EVT;850000;
VT;Res;8500 02;1;60;0;3;2 00;010;1;60;0 2;2;30;20;20;1 0;3;2;2;30;20 1;0;1;0;0;0;0;0
;20;1;0;1;0;0;
0;0;0;0;0;0;0;0 0
;0;0;0 0;0;0;0;0;0;0;
set to 0, d ode always, y when the v set to 2, th We named i nd it may b evice doesn and cannot vehicle is pa e device ch it as Virtua be need adju nt check dr t support pa arked. ecks driving l Ignition. V ustment of iving or par arking lock rking state o and the ser of the vehic rvice that en le. It report nters sleep o s status or deep g or parking Virtual igniti voltage rang state of the on can ope ge for speci e vehicle wit erate when t ial vehicle. F th voltage r the device i For setting m range of nstalled method,
, pulse tim D Blink line a vent is set to e Handsfree 2 -> 3 -> 4 ->
e mute, 5 :Max e may have and Buzzer t o door sens kit, each time
>5 ->0 -> 1 -
x Volume) tolerance a type cannot sor, active s e the volume up
-> 2 ->3 -> 4 bout dozens set both OU state means p button is press 4 -> 5 - > 0 -
s of ms. UT1 and OUT door is ope sed once, the sp
> 1 -> . eously. T2 simultane ened. peaker volume i is turned up as b below.
<exam
[comm
[respon
<notes
** If IG string sleep a
** If IG vehicle into re please
** In ca
** Imm
** In ca
** If de mple>
mand] SA200 nse] SA200E s>
GNITION is with idle m automatically GNITION is s es battery. W eal vehicle a refer 6.3. ase of pulse, mobilizer, LED ase that a ev evice has the 0 -> 1 -> 2
(0 : Volume no supporte able is for ex ed event line xample of 4 e is fixed to line event m No Use. model. Type of Below ta Field HDR DEV_ID D VER IGNITIO ON T1 T2 Definit ions U nit Rem mark SA200E EVT 6 cha ar. 02 0 ~
2 Strin g Strin g S ec S ec Com mmand type Devi ce ID Proto ocol Version Ignit 0 : N 1 : U 2 : V 3 : V tion using st Not use ignit Use ignition Virtual ignitio Virtual ignitio ate ion Line on(power) on (motion) Dela y for enterin ng idle mode e after igniti ion goes to off Dela y for enterin ng active mo ode after ign nition goes t to on 10 ST50 00 User Man nual IN1_TY YPE 0 ~
5 IN1_CH HAT Strin g 100 0ms sing) 0 =
1 =
2 =
3 =
4 =
5 =
6 =
7 = A 13 dete Defa Only can Falling Edge Rising Edge Both Edge (
Falling & Ris Panic Button n Call1 Button n n Call 2 Butto Reserved Anti-Theft B
= Disable ctor. ault = 3. y the device be set to Ca utton Immobilizer that includ all1 Button o Inpu Rang Defa If 0, t1 chattering g time. 9 ge : 0 ~ 999 ault = 3 sec. input1 is no ot checked. r if its act tivated by jammer ded voice op or Call2 But ption (audio tton. o circuit) OUT1_T TYPE OUT1_A ACTIVE PULSE1 1_NO PULSE1 1_ON PULSE1 1_OFF BAUD 7 0 or 1 0 0 0 0 7 =
No Use 0 =
No use
<exam
[comm
[respon
<notes
** In c should Type a comma EVT;850000;
VT;Res;8500 02;1;60;0;3;2 00;010;1;60;0 mple>
mand] SA200 nse] SA200E s>
nt 4 line m case of even e. be No Use e of non use ed event line nd chat time e. and is set to o other value odel, IN2_TY 2;2;30;20;20;1 0;3;8;8;30;0;0 1;0;1;0;0;0;0;0 0;6;6;1;0;0;0;0 0;0;0;0;0;0;0;0 0 0;0 0;0;0;0;8;8;0;0 YPE, IN3_TY YPE, IN4_TYP PE, IN5_TYPE E, OUT1_TY PE and OUT T2_TYPE es are set to o No Use a nd 0 autom matically alth hough these filed of 4-4. GS SM Parame eter Setting g HD DR DEV_ID VE R SM MS_LOCK SMS_MT1 SMS_MT T2 SMS_ _MT3 11 ST50 00 User Man nual SMS_ _MT4 N_CALL_LOCK IN K CALL_ _MT1 CA ALL_MT2 CALL_MT3 CALL_MT T4 CALL_ _MT5 CALL_ _MO1 CALL_MO2
: S Set paramete ers related S SMS or Call. Defin nition Field HDR DEV_ID D VER Definitio SA200GS ns SM 6 char. 02 SMS_LO OCK 0 or 1 1 U Unit R Remark C Command ty ype D Device ID P Protocol Ver sion L Lock of Rece D Disable (0) /
I If enabled, S SMS_MT1 ~
eiving Comm Enable (1) mands by SM MS only com MT3 numbe th mmands hat er can be ac ccepted. receives s from SMS_M MT1 SMS_M MT2 SMS_M MT3 SMS_M MT4 String String String String Up to o 20 char. P Phone numb ber for SMS commands Up to o 20 char. P Phone numb ber for SMS commands Up to o 20 char. P Phone numb ber for SMS commands Up to o 20 char. P Phone numb ber for SMS commands IN_CAL LL_LOCK 0 or 1 1 L Lock of Inco D Disable (0) /
I If enabled, c can be accep ming Call Enable (1) only call fro pted. om CALL_M T1 ~ MT5 number CALL_M MT1 CALL_M MT2 CALL_M MT3 CALL_M MT4 CALL_M MT5 CALL_M MO1 MO2 mple>
mand] SA200 nse] SA200G s>
en SMS or C CALL_M
<exam
[comm
[respon
<notes
** Whe String String String String String String String Up to o 20 char. P Phone numb ber for call Up to o 20 char. P Phone numb ber for call Up to o 20 char. P Phone numb ber for call Up to o 20 char. P Phone numb ber for call Up to o 20 char. P Phone numb ber for call Up to o 20 char. Up to o 20 char. P Phone numb ber for outgo oing call fro m device P Phone numb ber for outgo oing call fro m device GSM;850000 GSM;Res;8500 0;02;0;;;;;0;;;;;;;
;
0;;;;;;;
000;010;0;;;;;0 Call numbers are not set,
, that field s hould be em mpty. 4-5. Se ervice Param meter Sett ing 12 H HDR Z ZIP ST50 00 User Man nual DEV_ID VE ER P PARKING_LO CK SPEED D_LIMIT PW WR_DN C CON_TYPE GROUP_SEND G D MP_C CHK ANT_CHK BAT_ _CHK M_ _SENSOR CALL GEO_ _FENCE DATA_LOG JAM_C HK_DIST AM_CHK_TM JA M ANTITHF FT_CNT1 A ANTITHFT_CN NT2 JAM _DET Defin nition Field HDR DEV_ID D VER PARKIN NG_LOCK
: S Set paramete ers related re eport. Definit ions U nit Rem mark SA200S SVC 6 cha ar. 02 0 or 1 Com mmand type Devi ce ID Proto ocol Version Parki If 1 perio start park ing lock ena 1, the devi odically. Whe s moving ing lock em able (1) / dis ce checks en the vehic over some ergency. sable (0) vehicle po cle goes off velocity, t osition in some boun the device parking ndary or reports SPEED_ _LIMIT Strin g PWR_D DN 0 ~
2 CON_T TYPE 0 ~
2 ZIP 0 or 1 GROUP P_SEND 0 or 1 Km m/h Over If 0, If 1 repo r speed limit t does not che the device d ehicle runes and the ve erts once. orts speed al eck over spe over prede eed. efined value,
, device Powe 0 : D 1 : E 2 : E pe er saving typ ep and deep Disabled slee p sleep nabled deep nabled sleep p sleep servic ce e with Serve r Conn 0 =
1 =
2 =
Deta nection Type KEEP_CON KEEP_DISCO KEEP_NOP ail explanatio ON on is below. Use Disa Zip ble (0) / Ena able (1) Grou 0 : D 1 : E Grou up Send for Disable nable. One p up send is ex stored data packet can i xplained bel nclude up to ow. o 5 reports. 13 ST50 00 User Man nual MP_CH HK 0 or 1 ANT_C HK 0 or 1 BAT_CH HK 0 or 1 M_SEN NSOR 0 ~
4 CALL 0 or 1 GEO_FE ENCE 0 or 1 DAT_LO OG 0 or 1 Main Disa n Power Disc ble (0) / Ena connection C able (1) Check GPS Disa Antenna Co ble (0) / Ena onnection Err able (1) ror Check Back Disa kup Battery E ble (0) / Ena Error Check able (1) Moti ion Sensor 0 1 2 3 4 5 6 7 Motion Disable Enable Disable Enable Disable Enable Disable Enable Collision Disable Disable Disable Disable Enable Enable Enable Enable Shock k Disabl e Disabl e Enable e Enable e Disabl e Disabl e Enable e Enable e Supp Disa port Call wit ble (0) / Ena h headset able (1) Supp Disa port Geo-fen ble (0) / Ena nce able (1) 232 Log 0 =
1 =
out with RS2 No Use Enable getti ng saved log g data by RS S232
<exam
[comm
[respon
<notes
** Func If sh
** If t custom oper mple>
mand] SA200 nse] SA200S s>
ction of M_S hock or colli this parame mized ration docum ment. SVC;850000;
VC;Res;8500
;02;1;120;0;0 000;010;1;120 0;0;0;1;1;1;0;0 0;0;0;0;0;1;1;1 0;0;0;0;0;0;0;0 0;0;0 1;0;0;0;0;0;0;0 SEMSOR can ision detecti eter has bee n be used wi on is enable en customiz ith the mode ed, device w zed, This ta el that has m ill report to able should motion senso server when be disrega or. n gets any s arded and hock or colli you should ision. d follow CON_T TYPE 1. 2. KEEP_CON KEEP_DISC device disc N : The devic CON : The de connects GP ce keeps TCP evice connec PRS and TCP P connection cts TCP conn P connection n always and nection whe if it estimat d can receive n the data is tes there is n es a comman s sent. After no data for nd by GPRS. r sending, th he hin sending with 14 ST50 00 User Man nual 3. 3minutes. KEEP_NOP emergency on report option. In this case, P : The devic y mode or r parameters. it cannot re e doesnt se eceive Start It may be u eceive a com end any repo t Report com used for savi mmand by G ort after be mmand by S ing GPRS fee PRS. installed. Wh SMS or RS23 e. Current ve hen the dev 32, it starts r ersion canno ice enters report depen ot support th nding his Send evice stores starts sendi p send opti data if the ng stored d on is enable vehicle is in ata. ed, the devic send is usef ful to speed up sending
. n no GPRS area. And, t the vehicle moves to G GPRS availab ble area, ce makes 5 r reports to on ne bundle a nd send the ese 5 reports s at one Group The de device If grou time. Group M_Sen nsor 1. 2. Jammi JAM_C At leas If you
*Case o Jammin
*Case o Jammin JAM_C JAM_C If disab In this 4-6. Ad Collision: T Shock: The The device s e device sen sending a ev nding a even vent when ig nt when ignit gnition is ON tion is OFF a N and have a and have a m a motion. motion. ing detectio on procedur re HK_DIST & J st, we recom use two assi JAM_CHK_TM mend use JA ist functions M are assis AM_CHK_DIS
, it can dete ng detection st for jammin y. ST for safety of jamming ect two case as follows. n to avoid fa alse detectio n. of jamming ng detected of jamming ng detected GPRS only. K_DIST -> JA
-> JAM_CH GPRS & GPS S.
-> JAM_CH K_TM -> Tri HK_DIST : if HK_TM : if 0 0, skip this 0, skip this fu function. unction. AM_CHK_TM M -> Trigger ed by JAM_D DET mode. iggered by J AM_DET mo ode. ble all of ass case, its po dditional Pa sist functions ssible to fals arameters s, just trigge se detection ered by HAM n in weak GS M_DET mode SM or strong after detect ted jamming g. g radio area. HDR DEV_ID VE ER SVR_TY PE B_SVR_T TYPE UDP_ _ACK DEV_ _PORT Defin nition
: S Setting addit tional param meter request ted. 15 Field HDR DEV_ID D VER SVR_TY YPE 6 cha ar. 02 T /
U B_SVR_ _TYPE T /
U UDP_A ACK 0 ~
3 DEV_PO ORT Strin g Definit ions Un nit Remar rk SA200A ADP Comm mand type ST50 00 User Man nual Device e ID Protoc ol Version Protocol Ty pe Server T : TCP P U : UD DP tocol Type Backup p Server Pro P T : TCP U : UD DP ACK fr 0 : No 1 : ACK 2 : ACK and 3 : ACK Comm om Server w use K when the K when the d alive repor K when the mand respons Device It can If 0 o If not DEV_P es port for re be used onl r empty, the zero, the ORT. when UPD is s used. server receiv server receiv rt. server receiv se doesnt n ves reports e ves reports e except alive. except STT ves emergen need ACK. ncy report. eceiving com y when UDP e device wou device can mmand from P server is u uld use port receive co m UDP serve sed. 9000. mmands wi r. th port Reserve ed Reserve ed Reserve ed Reserve ed Reserve ed ed mple>
mand] SA200A nse] SA200 s>
ommand can Reserve
<exam
[comm
[respon
<notes This co 0 0 0 0 0 0 ADP;850000 0ADP;Res;850
;02;U;T;2;900 0000;022;U;T 00;0;0;0;0;0;0 0 0;0;0;0 T;2;9000;0;0;0 n be applied from softwa are version 2 22. ACK in n case of UD DP 16 ST50 00 User Man nual UDP is comple s protocol t etion of send that doesnt ding with AC t check whe CK dependin ether the da ng on UDP_A ata is transm ACK type. mitted succe essfully. So, the device checks ACK is sent by serv ver when th e data is rec ceived. If the A reache ACK is not d to server a sent during and sends th more than he data aga 2 minutes a in. after sendin g, the devic ce recognize es the data w was not Examp ples of ACK report are a as below. String Format : SA A200ACK;85 0000 Zip For rmat : 0x15 0x85 0x00 0 0x00 It is rec commended d ACK_TYPE is set to 1 t to confirm a all data can be transmitt ted safely. Repor rt Type UDP_AC CK=0 U DP_ACK=1 UDP_AC K=2 UD DP_ACK=3 Alive STT Event
, Alert, Etc. Emerg gency X X X X X O O O X X O O X X X O 4-7. Se et Paramete ers of Main n Voltage HDR DEV_ID VER CHR_STOP_ _THRES_12 CHR_ _STOP_THRES S_24 DECIDE_B BAT_24 OPE ERATION_STO OP_THRES_1 12 O OPERATION_S STOP_THRES S_24
: S Set some val ue of main v voltage. Defin SA20 Re nitions 00MBV Co emark ommand typ e 6 c char. De evice ID 0 02 Pro otocol Versio on Defin nition Field HDR DEV_ID D VER IG GNDET_H IGNDET_L L 17 ST50 00 User Man nual CHR_ST TOP_THRES_ _12 DECIDE E_BAT_24 OPERA ATION_STOP_ _THRES_12 IGNDET T_H IGNDET T_L Str ring Str ring Str ring Str ring Str ring oltage value Vo ve hicle. oltage value Vo 12 V. to stop ba ackup batter ry charging in 12V to check w whether the vehicles ba attery is Vo oltage value e device op Th tha an this value to protect ve eration stop e in vehicle t ehicle batter ps if car batt that has 12V ry. ery voltage V power. is lower rtual ignitio when ve on, the veh ehicle powe hicle can re ecognize than is more e er In dri IGN De case of vi iving state NDET_H. efault = 0 In pa De case of vi rking state w efault = 0 rtual ignitio when vehicle on, the veh e power is le hicle can re ess than IGN ecognize NDET_L. MBV;850000 MBV;Res;8500 0;02;10.5;22;1 000;122;10.5 19;8.00;18.00 5;22;19;8.00;1 0;0;0 18.00;0;0 mple>
mand] SA200 nse] SA200M
<exam
[comm
[respon
<note>
>
T_H and IGN IGNDET NDET_L are 0, device ch heck parking g and driving g automatica ally. 4-8. Se et Paramete ers of Mot ion Sensor r HDR DEV_ID VER CHR_STOP_ _THRES_12 CHR_ _STOP_THRES S_24 DECIDE_B BAT_24 OPE ERATION_STO OP_THRES_1 12 O OPERATION_S STOP_THRES S_24 IG GNDET_H IGNDET_L L V I_ON_THRES S VI_ON_DEL LAY VI_ON_PE ERCENT VI_OF FF_THRES VI I_OFF_DELAY Y V VI_OFF_PERC CENT Defin nition Field HDR DEV_ID D VER SHOCK K_DELAY
: S Set motion s sensor param meters Definit SA200M ions MSR Un nit 6 cha ar. 02 Strin g Se Remar Comm rk mand type Device e ID Protoc ol Version c. Delay 0 Dis for entering sable shock detec ction mode after ignitio n off 18 ST50 00 User Man nual Range Recom
: 1 ~ 21600 mmend : 600 0 (5hour)
( 10 min.) MOTIO ON_THRES Strin g SHOCK K_THRES Strin g COLL_T THRES Strin g Ste ep Detect Range Recom tion level of shock violat
: 0.04 ~ 2.0 mmend : 0.04 4 tion. Ste ep Detect Range Recom tion level of shock violat
: 0.04 ~ 2.0 mmend : 0.04 4 tion. Ste ep Gravity Range Recom y for collisio
: 0.1 ~ 2.0 mmend : 0.7 n report. VI_ON_ _THRES Strin g 1/25 VI_ON_ _DELAY Strin g Sec. VI_ON_ _PERCENT Strin g
%
VI_OFF F_THRES Strin g 1/25 VI_OFF F_DELAY Strin g Sec. VI_OFF F_PERCENT Strin g
%
hold value fo or Motion Vi rtual Ignitio n On 5G Thresh Range Defaul
: 3~50 t : 5 tion Virtual Delay t Range Defaul time for Mo
: 3~999 t : 10 Ignition On nt for Motion n Virtual Ign nition On. Percen Range Defaul
: 30~100 t: 70 hold value fo or Motion Vi rtual Ignitio n Off 5G Thresh Range Defaul
: 3~50 t : 5 tion Virtual Delay t Range Defaul time for Mo
: 3~999 t : 10 Ignition Off nt for Motion n virtual Igni ition Off. Percen Range Defaul
: 30 ~ 100 t : 70 MSR;;02;600 MSR;Res;8525 0;0.04;0.04;0.7 588;128;600;
7;5;10;70;5;1
;0.04;0.04;0.7 0;70 70;5;10;70;5;1 10;70
<exam
[comm
[respon
<notes
* For t insensi as it fo mple>
mand] SA200 nse] SA200M s>
the shock le tive or shock dete ection. evel, we rec commend it t to set to 0.04. if it's over than 0.04, the se ensor will bbe more 19 4-11. C Control Com mmand HDR R DEV V_ID V VER CMD_ID ST50 00 User Man nual Defin nition Field HDR DEV_ID D VER CMD_I D
: C Controls som me functions
. Definit ions Un nit Rema rk SA200C CMD Comm mand type 6 cha ar. 01 Strin g Device e ID Protoc col Version Contro ol command d content n : If its not t correct the e Unit ID, ig gnored. Caution 4-11-1. Defin Field CMD_I D
. Status Re equest nition
: L Location poll l, request of f the status r report. Definiti ons Un it Rema rk StatusR Req Status If rece s request eived, the de evice sends s status string instantly.
<exam
<exam
[comm
[respon 7;1;0 mple>
mple>
mand] SA200 nse] SA200S 0;15.33;10000 CMD;850000 TT;850000;0 00;2;0002 0;02;StatusRe 10;20090724 eq 4;07:12:16;00 0129;+37.479 9995;+126.8 885815;000.0 029;000.00;
. Reset 4-11-2. Defin nition
: R Reset all of p parameters. Field CMD_I D Definiti ons Un it Rema rk Reset t Reset 20 ST50 00 User Man nual ze all param Initiali device e. meters with factory val ue and reb oot the
<exam
[comm
[respon mple>
mand] SA200 nse] SA200 CMD;850000 0CMD;Res;85 0;02;Reset 50000;010;Re eset
. Preset nition 4-11-3. Defin Field CMD_I D
: R Reset all of p parameters. Definiti ons Un it Rema rk Prese et Repor Respo param rt parameter onse include meters. It incl setting valu s network, r udes status ues and curr report, even of device, a ent device s t, GSM and also. status. service
<exam
[comm
[respon
[respon mple>
mand] SA200 nse] SA200C NTW;
RPT;6 EVT;1 GSM;
SVC;1 DEV;0 nse] event 4 NTW;
RPT;6 EVT;1 GSM;
SVC;1 DEV;0 CMD;850000 CMD;Res;850
;0;internet;;;1 60;180;120;60 1;60;0;3;2;2;30 0;;;;;0;;;;;;;;
1;120;0;0;0;0;
0;0;0;0 line model
;0;internet;;;1 60;180;120;60 1;60;0;3;8;8;30 0;;;;;0;;;;;;;;
1;120;0;0;0;0;
0;0;0;0 0;02;Preset 000;010;Pres 111.111.111.1 0;3;0;0;;;;
0;20;20;1;1;1;
1;1;1;0;0;0;0 111.111.111.1 0;3;0;0;;;;
0;0;0;6;6;1;0;0 1;1;1;0;0;0;0 set;
111;8600;;;;1 234;
;0;0;0;0;0;0;0
;0;0;0;0;0;
111;8600;;;;1 234;
0;0;0;0;0;0;0;0 0;0;0;0;
<notes
** Afte
** DEV s>
er power on, V filed inform device send ms current st ds response atus of devi string of pre ce as below eset once. w. OUT1 Disable 0 =
OUT2 2 le 0 = Disab PWR_DN 0 =
= Normal 0
=
BAT_ Backu _CON up battery y is 21 ST50 00 User Man nual Enable 1 =
1 = Enable e 1 =
2 =
= Sleep
= Deep sleep p disco 1 = B onnected. Backup batte ery is conne cted. Definiti Preset ons tA Un it Rema Repor rk rt all parame eters includin ng additiona al parameter. r. D Field CMD_I
<exam
[comm
[respon mple>
mand] SA200 nse] SA200C NTW;
RPT;6 EVT;1 GSM;
SVC;1 ADP;U DEV;0 0;02;PresetA 000;010;Pres 111.111.111.1 0;3;0;0;;;;
0;20;20;1;1;1;
CMD;850000 CMD;Res;850
;0;internet;;;1 60;180;120;60 1;60;0;3;2;2;30 0;;;;;0;;;;;;;;
1;1;1;0;0;0;0;
1;120;0;0;0;0;
U;T;2;9000;0;
0;0;0;0;0;
0 0;0;0;0;0;0;0;0 s>
s command V filed inform
<notes
** This
** DEV can be app ms current st plied from s atus of devi setA;
111;8600;;;;1 234;
;0;0;0;0;0;0;0
;0;0;0;0;0;
oftware ver ce as below rsion 22. w. OUT1 Disable Enable 0 =
1 =
OUT2 2 0 = Disab le 1 = Enable e PWR_DN 0 =
1 =
2 =
= Normal
= Sleep
= Deep sleep p
=
0 disco 1 = B onnected. Backup batte BAT_ Backu _CON up battery y is ery is conne cted. T TRACKING 0 =
Stop Trackin Start Trackin 1 =
ng ng Anti 0 = Dis 1 = Ena i-Theft sable able Reserve ed Res served 4-11-4. ACK of Em mergency 22 nition Defin Field CMD_I D
: S Stop emerge ency report. ST50 00 User Man nual Definiti ons Un it Rema rk AckEme erg owledgemen evice will sto t of emerge op emergen ency report. ncy reports i f it is in em ergency Ackno The d state.
<exam
[comm
[respon mple>
mand] SA200 nse] SA200C CMD;850000 CMD;Res;850 0;02;AckEme 000;010;Ack erg kEmerg 4-11-5. Defin
. Enable1 nition D Field CMD_I
<exam
[comm
[respon
[respon
<notes
** Outp
** If OU
** If O automa mple>
mand] SA200 nse] SA200C nse] SA200C s>
put1 line go UT1 set with OUT1 set wit atically.
: A Active Outpu ut1. Definiti Enable ons e1 Un it Rema Enable rk e Output1 CMD;850000 CMD;Res;850 CMD;Res;850 0;02;Enable1 1 000;010;Ena ble1 000;010;Ena ble1NoUse
(in case that t IN type is s set to No U Use). status. oes to active h immobilize th pulse typ er, output1 li pe, output1 ine goes to line genera active status ates pulse an s gradually w nd returns i with pulse in inactive stat n driving mo te after puls de. sing out 4-11-6. Defin
. Disable1 nition
: I nactive Outp put1. Field Definiti ons Un it Rema rk Disable e1 Disabl le Output1 D CMD_I
<exam
[comm mple>
mand] SA200 CMD;850000 0;02;Disable1 1 23 ST50 00 User Man nual CMD;Res;850 CMD;Res;850 000;010;Disa 000;010;Disa able1 able1NoUse
(in case tha t IN type is set to No U Use). oes to inactiv ve status.
[respon
[respon
<notes
** Outp nse] SA200C nse] SA200C s>
put1 line go 4-11-9. Defin Field CMD_I D nition
. Request I IMSI 4-11-10 Defin
<exam
[comm
[respon 4-11-11 Defin Field CMD_I D mple>
mand] SA200 nse] SA200C 1. ReqVer nition
: R Request the unique SIM ID. Definiti ons Un it Rema rk ReqIM MSI Reque If rece est IMSI (uni eived, device
) que SIM ID) I of using SIM e sends IMSI M.
<exam
[comm
[respon mple>
mand] SA200 nse] SA200C CMD;850000 CMD;Res;850 I 0;02;ReqIMSI 000;010;Req qIMSI;724031 1111553779 0. Request t ICCID nition
: R Request the ICCID. Field CMD_I D Definiti ReqICC ons CID Un it Rema Reque If rece rk est ICCID (se eived, device quence num e sends ICCID mber that is D of using S displayed on SIM. n SIM) CMD;850000 CMD;Res;850 0;02;ReqICCI 000;010;Req ID qICCID;89550 02300000842 256668
: R Request softw n. ware version Definiti ons Un it Rema rk ReqVe er Reque Device versio est device ve e reports M n. ersion Model, Buye er, Protocol and S/W release 24 ST50 00 User Man nual
<exam
[comm
[respon mple>
mand] SA200 nse] SA200C CMD;850000 CMD;Res;850 0;02;ReqVer 000;010;Req qVer;SA200E_ _SAMPLE_ST BASE_001 2. Erase Al l 4-11-12 Defin nition
: E Erase all of d data in buffe er. Field CMD_I D Definiti ons Un it Rema rk EraseA All Erase This is a cust saved all rep s needed to tomer. ports and di initialize jus isable outpu st before de uts. evice is delivvered to
<exam
[comm
[respon mple>
mand] SA200 nse] SA200C CMD;850000 CMD;Res;850 0;02;EraseAll 000;010;Eras seAll 4-11-13 Defin 3. Initialize e Traveled Distance nition
: I nitialize the travel distan nce. Field Definiti ons Un it Rema rk InitDis st Set tra aveled distan nce to 0. D CMD_I
<exam
[comm
[respon mple>
mand] SA200 nse] SA200C 4-11-14 Defin CMD;850000 CMD;Res;850 0;02;InitDist 000;010;InitD Dist 4. Initialize e Message Number nition
: I nitialize the message se quence num mber. Field CMD_I D Definiti ons Un it Rema rk InitMsg gNo Set m essage num ber to 0. 25 ST50 00 User Mannual
<exam
[comm
[respon mple>
mand] SA200 nse] SA200C CMD;850000 CMD;Res;850 0;02;InitMsg 000;010;InitM No MsgNo 4-11-23 Defin 3. Reboot nition D Field CMD_I
<exam
[comm
[respon mple>
mand] SA200 nse] SA200C 4-11-24 Defin D CMD_I
<exam
[comm
[respon mple>
mand] SA200 nse] SA200C
: r reboot unit. ions Definit Reboot Un nit Rema Reboo rk ot device. CMD;850000 CMD;Res;850 0;02;Reboot 000;010;Reb boot 4. Request t SIM IP Ad ddress nition
: R Request of th he local IP a address in SI M card. Field Definit ions Un nit Rema rk ReqSIMI IP SIM ca ard IP reque est CMD;850000 CMD;Res;850 0;02;ReqSIMI 000;010;Req IP qSIMIP;172.1 6.18.6 26 3. Inst 3.1 Inse allation ert SIM card d. ST5000 User Man nual 27 4. Trou 4.1 Blue uble Shoo e LED: Indic oting (LED ates GPRS s Indicator status. r) ST50 00 User Man nual GPRS Norma al Blink Coun nt Remarks s 1 Server Com. Error 2
<Possib 1. Serve 2. Serve 3. Temp le Cause>
er or network er is closed. orary netwo ork barrier k parameter is wrong. GPRS C Com. Error 3 No Ne twork 4 SIM PI N Locked 5 Cannot t NW Attach h 6 No SIM M 7
<Possib 1. Netwo 2. SIM is 3. Temp 4. Weak 5. GPRS le Cause>
ork paramet ter is wrong. bout GPRS u s blocked ab using. ork barrier orary netwo al k GPRS signa antenna co onnection is not firm.
<Possib 1. GPRS 2. GPRS 3. Devic le Cause>
antenna is antenna or ce is broken. disconnecte socket of G d. PRS antenna a is broken.
<Possib 1. SIM P le Cause>
PIN is enable ed.
<Possib 1. Weak 2. GPRS le Cause>
k GPRS signa antenna co al. onnection is not firm.
<Possib 1. There 2. SIM o le Cause>
e is no SIM o or SIM socke or SIM is not et is broken. t inserted pr roperly. 28 ST5000 User Mannual D LED: Indica ates GPS sta atus. 4.2 RED GPS Norma al No Fix Blink Cou unt Rema rks 1 2
<Poss 1. If p some 2. GPS 3. GPS sible Cause>
>
GPS chipset power on, G minutes. S antenna la S antenna co ays on weak onnection is t is trying t to find posi tion during signal positio on or no GPS s not firm. GPS Ch GPS An hipset Error ntenna Error r 4
<Poss 1. GPS 2. GPS 3. Uni sible Cause>
>
s disconnecte S antenna is S antenna o r socket of G it is broken. ed. GPS antenna a is broken. 29 ST5000 User Mannual FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-07-13 | 1850.2 ~ 1909.8 | PCB - PCS Licensed Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-07-13
|
||||
1 | Applicant's complete, legal business name |
Suntech International Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0026773614
|
||||
1 | Physical Address |
A-1705, A-1706, Greatvally, 32, Digital-ro 9-gil Geumcheon-Gu
|
||||
1 |
(Gasan-dong, Greatvally), B-1506, 32, Digital-ro
|
|||||
1 |
Seoul, N/A
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
WA2
|
||||
1 | Equipment Product Code |
ST500
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Y**** K****
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
82-2-********
|
||||
1 | Fax Number |
82-2-********
|
||||
1 |
y******@suntechint.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/09/2017 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PCB - PCS Licensed Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Tracker | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is ERP for Part 22 and EIRP for Part 24. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
DT&C Co., Ltd.
|
||||
1 | Name |
C**** L******
|
||||
1 | Telephone Number |
82313********
|
||||
1 | Fax Number |
82313********
|
||||
1 |
c******@dtnc.net
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | 824.2 | 848.8 | 0.804 | 1 ppm | 245KGXW | ||||||||||||||||||||||||||||||||||
1 | 2 | 24E | 1850.2 | 1909.8 | 0.541 | 1 ppm | 245KGXW |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC