all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 462.91 KiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 462.91 KiB |
ST690 User Manual Suntech International Ltd. ST690U User Manual 1. Intro oduction This doc cument desc cribes featur es, protocols s and detail operation o of ST690. If there the cont special b is another tents of the buyer. operation d document escription d is different ocument fo with this, cu r special bu ustomizing d uyer to custo document sh omize or mo hould be ap odel and plied for WCDMA, GP of device re S and event eports gettin parts. ng GPS posi tion and ot her informs of vehicle t to server or check con nnected line s and suppo ort additiona al functions. vice has 3 op peration mod des, driving, parking and d emergency y. 2 erview consists of W in purpose cally. can control o peration M Mode 2. Ove Device c The ma periodic Device c 2-1. Op The dev ST690U ving
: Driv king
: P Parking statu ergency : On nce panic bu device send s emergency User Manual ving status w us that starts utton is On o y reports un
** Driv
** Park
** Eme The when ignition s if ignition i or any other til A1 times n is on. is off during r status as pe or receiving more than er designed. g server ackn T1. nowledge. eport ormation at p orts GPS an d some info ome alerts, for examp VL sends so
. ted input line e and so on distinguishe es all report ts with 6 ty
. nd response can store rep ports when up to 2,00 capacity is 1500 bytes eports) and and new rep port is buffer ndition is rec eporting con an increase is capacity c pe of reports s has priority mand Respo ncy Comm ncy is the fir rst to be sen reporting ro 00 status rep as comman red when th covered, dev if it is neede y, and priori onse Alert nt after recov oute (For exa ports, 50 em nd response e buffer is fu vice starts se ed. ty is as belo t Status R vering WCD predefined i le, moveme nterval, depe ent at the p ending on t parking con he current m ndition, chan modes. nging of ypes, Status report, em ergency, ev ent, alert, a alive and ample, WCD mergency re e. In case of ull and new ending all bu DMA conditio eports, 50 a f status repo status repor uffered repo on) is not su lert reports orts, oldest rt enters (FIF rts. uccessful.
(include report is FO). ow. Report Ali MA conditio ve (Lowest) on. hanged by W WCDMA or S SMS, and so ome control can be reali ized also meter ce can be ch etting Param ters of devic ame way. rotocols are described i n Chapter 4
. described here;
atures atures are r Down can proces ption when ndicator icates WCDM s two step the vehicle ps of power is parked. r-down, Slee ep and De eep Sleep, f for reducing g power MA and GPS S states. Its h helpful to ch heck error ca ause. 3 2-2. Re AVL rep Also, AV connect Device comman Device c Storage event re erased a When re Also, thi Each typ Emergen Emergen 2-3. Se Paramet in the sa Detail p 2-4. Fe Key fea
- Power Device consum
- LED In LED ind ng Lock can check w ignition on ncy report im speed can check sp te Firmware Firmware of ented, devic ers do not n of FOTA de
- Events s has 2 output Device h
- Updat When F impleme Custome Method
- Parkin Device without emergen
- Over s Device c
- GPS A Device c Its appl
- Main The dev disconn Its appl
- Batter Device c Its appl 3. Prot All comm Every fil All repo Power Chec vice can re ected or ma icable only f Antenna Che can alert wh icable only f mand and re ed is disting rt string from tocol Con ST690U User Manual t lines, 3 inp put lines and d ignition lin e. e by Over Th f device ha ce can updat need to visit escribes at S he Air (FOTA s some err te internal R every vehic SunTech_OTA A) ror or has ROM file by le to downlo A_UA_Protoc to be chan over the ai oad the new col documen nged for a ir (FOTA), re w firmware. nt in detail. new servic motely via W e to be WCDMA. whether the n. In the ca mmediately. vehicle mo ase that it oves off the notes the preset park unauthorize king bounda ed moving ary or starts or driving, s driving it sends peed of vehi cle and send d alert of ov ver-speed to server. ecking en GPS ante for models t enna is disco that have ext onnected. ternal anten na. cking ecognize the ain power dr for battery m e main pow rops below p model. wer and inf form to ser preset value. rver when main powe r line is ry Error Aler rt out battery e can alert abo icable only f for battery m error related model. d on chargin g. struction eports are st guished by s m device is tring and fo semi colon. ended by r (0x0D). llows below format. 4 and message ST690U e format (fr User Manual rom server t to device) Comma HDR DEV_ID VE ER Field 1 Field 2 Field n Field HDR DEV_ID D VER Field 1
~ n Definition ns Rema ark String 6 char. 02 String ST69 0 + Comm and type Device e ID of AVL Protoc col Version. This is fixed with 02. Conte ents Device I If the co not mat Report ID is unique ommand ha tched with D number of s invalid val DEV_ID of the each device lue or DEV_I e unit. that consist ID of the co
. ts of 6digits. ommand tha at is sent by y WCDMA o or SMS is message fo ormat (from device to s server) HDR DEV_ID SW W_VER Fiel d 1 Field 2 2 Field n Field HDR DEV_ID D VER Field 1
~ n Definition ns Rema ark String 6 char. 001 String ST69 0 + Report type Device e ID of AVL Softw are version t that the dev vice has. Conte ents 4. Com When t paramet 4-1. Ne mmands he device is ters or acts s received a related oper a command, ration. etwork Par rameters Se etting
, it respond ds with resp onse string and chang es some HDR DEV_ID D VER AUTH AP PN USER R_ID USE ER_PWD SEVER_IP SEVER_PORT B_ _SEVER_IP B_SE EVER_IP SMS_NO PIN_NO Defin nition Field
: S Set network parameters and PIN num mber. Definit ions U nit Rem mark 5 Com mmand type Devi ce ID Proto ocol Version DMA authent WCD AP(NO in S 0 : PA CHAP(YES in 1 : C Automatic W A : A In n this case, p U USER_PWD fi tication Synctrack) n Synctrack) WCDMAset. parameters i ieldshould b in APN, USE be empty. R_ID and Acce ess Point Nam me ID fo or WCDMA A Access Passw word for WC CDMA Acces ss Serve er IP Addres ss Serve er Port Back kup Server IP P Address Back kup Server Po ort Phon This cond meth For n ne number w can be use dition is no hod when IP no use, it sh what the dev ed for backu t good. Or, P and Port ar ould be emp vice sends S up in the ar
, it can be re empty. pty. o. MS report to WCDMA rea that if W used main n report PIN Number to release PIN lock if it is e enabled HDR DEV_ID D VER AUTH ST690U User Manual ST690N NTW 6 cha ar. 02 0 /1
/A APN USER_I ID USER_P PWD SEVER_ _IP SEVER_ _PORT B_SEVE ER_IP B_SEVE ER_PORT SMS_N NO Strin g Strin g Strin g Strin g Strin g Strin g Strin g Strin g Strin g PIN_NO O mple>
<exam mand] ST690N
[comm
[respon nse] ST690N ST690N s>
etwork does
<notes
** If ne Autom It the d on inse For exa USER_P And th is selec matic WCDM device is set erted SIM. ample, if Air PASS to emp he device rep cted. MA Set t to Automa rtel SIM is i pty. ports respon NTW;850000 NTW;Res;8500 NTW;Res;8500 0;02;0;interne 000;010;0;int 000;010;A1;t et;;;111.111.1 ternet;;; 111. tim.br;tim;ti 111.111;8600 111.111.111 im; 111.111. 0;;;;
;8600;;;;
111.111;860 0;;;;
not require User ID and d Password, these fields should be e empty. atic WCDMA ASet, the de evice set WC CDMA param meters autom matically dep pending nserted, the e device set AUTH to 0, APN to ai tel.WCDMA. com, USER _ID and nse string af fter adding real WCDMA A parameter rs when auto omatic WCD DMA set 6 ST690U User Manual 4-2. Re eport Param meter Setti ing HDR DEV_ID V VER T1 T2 T3 A1 SND D_DIST T T4 SMS_T T1 SMS_T T2 SMS_ _PACK_NO ANG LE_RPT RPT_TYPE Defin nition Field HDR DEV_ID D VER T1 T2 T3 A1
: S Set paramete ers related o on report int erval. Definit ions U nit Rem mark ST690R RPT 6 cha ar. 02 Strin g S ec Strin g S ec Strin g S ec Strin g Com mmand type Devi ce ID Proto ocol Version Inter Rang If 0, vehic rval for send ge : 0 ~ 864 report in p cle starts pa ing status re 00 parking will rking. Inter Rang If 0, vehic rval for send ge : 0 ~ 600 report in d cle starts dri ing status re 00 driving will iving. Inter Rang If 0, eme rval for send ge : 0 ~ 999 emergency rgency state ing status re 9 y report will e occurs. eport in park king mode be sent on nly one tim e when eport in driv ving mode be sent on nly one tim e when eport in eme ergency mod de be sent on nly one tim e when Num gets If 0, mber of attem acknowledg no emergen mpts for em ge from serv ncy report w mergency rep ver will be sent. port until the e device SND_D DIST Strin g Me g status repo ort. eter Dista Rang If 0, If no reach ance interval ge : 0 ~ 600 status repor ot 0, stats hes predefin l for sending 00 (60km) rt related on report is ned SND_DIS n moving dis send when ST. stance is disa n traveled d abled. distance T4 Strin g S ec Inter rval for send ing keep ali ve string 7 ST690U User Manual SMS_T 1 SMS_T 2 SMS_PA ACK_NO ANGLE E_RPT Strin g Strin g Strin g Strin g M Min M Min Inter rval for send Inter rval for send ing status re eport in park king mode ing status re eport in driv ving mode Repo ort No in on ne SMS mess sage Deg gree Repo 0 : D Rang ort STT mess Disable ge : 1 ~ 179 sage if its g reater than A ANGLE_RPT. RPT_TY YPE Strin g Set t 0: FIF 1: LIF the type of r FO : First in FO : Last In reporting. First Out. First Out. RPT;850000;0 PT;Res;85000 02;180;120;6 00;010;180;1 60;3;0;0;0;0;0;
120;60;3;0;0;0
;0;0 0;0;0;0;0 val is set bi not progres this disconn be sent on ig number, sed for a lo nection by se ly when the network ma ng time. So, ending shor device has ay disconne
, unit may n rt data with no data to s ect WCDMA not receive c short term. send during T4 interval. A connection command by n because W y WCDMA. T WCDMA T4 is for mple>
mand] ST690R nse] ST690R s>
eport interv unication is ting against e report can
<exam
[comm
[respon
<notes
** If re commu protect
** Alive 4-3. Ev vent Param eter Settin ng HD DR DE EV_ID VER IGNITIO ON T T1 T2 IN1_T TYPE IN2 2_TYPE IN3_TYPE IN1_CHA AT IN2_ CHAT IN N3_CHAT OUT1_ _TYPE OUT T2_TYPE OU UT1_ACTIVE PULSE1 1_NO PULS SE1_ON P ULSE1_OFF OUT2_ACT TIVE PULSE2_N NO PULSE E2_ON PUL LSE2_OFF IN4_T TYPE IN5 5_TYPE I IN4_CHAT IN5_CHA AT BA AUD Defin nition Field HDR DEV_ID D VER T1
: S Set paramete er related ev vent. Definit ST690E ions EVT U nit Rem Com mark mmand type 6 cha ar. 02 Strin g S ec Devi ce ID Proto ocol Version Dela y for enterin ng idle mode e after igniti ion goes to off 8 T2 IN1_TY YPE ST690U User Manual Strin g 0 ~
7 S ec IN1_CH HAT Strin g 100 0ms OUT1_ TYPE 0 ~
5 OUT1_A ACTIVE 0 or 1 PULSE1 1_NO Strin g Dela y for enterin ng active mo ode after ign nition goes t to on sing) 0 =
1 =
2 =
3 =
4 = C 5 = C 6 =
7 = A 13 dete Defa Only can Falling Edge e Rising Edge Falling & Ris Both Edge (
Panic Button n Call1 Button n Call 2 Button n Reserved Anti-Theft B
= Disable ctor. ault = 3. y the device be set to Ca that includ all1 Button o Immobilizer Button Inpu Rang Defa If 0, t1 chattering g time. ge : 0 ~ 999 9 ault = 3 sec. input1 is no ot checked. r if its act tivated by jammer ded voice op or Call2 But ption (audio tton. o circuit)
& Auto acti ctive mean ive s immobil izer is a ctivated hicle starts p parking. indicating c call status. R efer 7-2-3. GPIO 0 = G 1 =
immobilizer Immobilizer 2 = I Auto ac auto matically w when the veh 3 =
Pulse LED Out for 4 =
Buzzer 5 =
0 = O 1 = G Open when GND when o out1 is activ ve ve out1 is activ Pulse Rang If pu e number w ge : 0 ~ 999 ulse no is 99 hen out1 typ 9 99, pulsing r pe set to pu ulse. runs perman nently. PULSE1 1_ON Strin g 100 0ms Activ Rang It sh ve time of pu ulse1 9 ge : 0 ~ 999 with even n ould be set umber. 9 ST690U User Manual PULSE1 1_OFF Strin g 100 0ms BAUD 0 ~
4 Inact Rang It sh tive time of ge : 0 ~ 999 ould be set pulse1 9 with even n umber. en extra eve nts support RS232. Its a Baud 0 =
1 = 4 2 = 9 3 =
4 =
5 =
If the available whe d-rate No use 4800bps 9600bps 19200bps 38400bps 115200bps e device doe es not suppo ort RS232, it t should be 0 0.
<exam
[comm
[respon
<notes
** If IG string sleep a
** If IG vehicle into re please
** In ca
** Imm
** In ca
** If de mple>
mand] ST690E nse] ST690EV s>
GNITION is with idle m automatically GNITION is s es battery. W eal vehicle a refer 6.3. ase of pulse, mobilizer, LED ase that a ev evice has the 0 -> 1 -> 2
(0 : Volume EVT;850000;0 VT;Res;85000 02;1;60;0;3;2 00;010;1;60;0
;2;30;20;20;1 0;3;2;2;30;20;
1;0;1;0;0;0;0;0
;20;1;0;1;0;0;0 0;0;0;0;0;0;0;0 0 0;0;0 0;0;0;0;0;0;0;0 set to 0, d ode always, y when the v set to 2, th We named i nd it may b device doesn and cannot vehicle is pa e device ch it as Virtua be need adj nt check dri t support pa arked. ecks driving l Ignition. V ustment of iving or par arking lock rking state o and the ser of the vehic rvice that en le. It report nters sleep o s status or deep g or parking Virtual igniti voltage rang state of the on can ope ge for speci e vehicle wit erate when t ial vehicle. F th voltage r the device i For setting m range of nstalled method,
, pulse tim D Blink line a vent is set to e Handsfree 2 -> 3 -> 4 ->
e mute, 5 :Max e may have and Buzzer t o door sens kit, each time
>5 ->0 -> 1 -
x Volume) tolerance a type cannot sor, active s e the volume up
-> 2 ->3 -> 4 bout dozens set both OU state means p button is press 4 -> 5 - > 0 -
s of ms. UT1 and OU door is ope sed once, the sp
> 1 -> . eously. T2 simultane ned. peaker volume i is turned up as b below. no supporte able is for ex ed event line xample of 4 e is fixed to line event m No Use. model. Type of Below ta Definit ions U nit Rem mark ST690E EVT 6 cha ar. 02 Com mmand type Devi ce ID Proto ocol Version Field HDR DEV_ID D VER 10 IGNITIO ON ST690U User Manual 0 ~
2 T1 T2 IN1_TY YPE Strin g Strin g 0 ~
5 S ec S ec IN1_CH HAT Strin g 100 0ms Ignit 0 : N 1 : U 2 : V 3 : V ion using st Not use ignit Use ignition L Virtual ignitio Virtual ignitio ate tion Line on(power) on (motion) Dela y for enterin ng idle mode e after igniti ion goes to off Dela y for enterin ng active mo ode after ign nition goes t to on sing) 0 =
1 =
2 =
3 =
4 = C 5 = C 6 =
7 = A 13 dete Defa Only can Falling Edge e Rising Edge Falling & Ris Both Edge (
n Panic Button Call1 Button n Call 2 Button n Reserved Anti-Theft B
= Disable ctor. ault = 3. y the device be set to Ca that includ all1 Button o Immobilizer Button Inpu Rang Defa If 0, t1 chattering g time. 9 ge : 0 ~ 999 ault = 3 sec. input1 is no ot checked. r if its act tivated by jammer ded voice op or Call2 But ption (audio tton. o circuit) OUT1_ TYPE OUT1_A ACTIVE PULSE1 1_NO PULSE1 1_ON PULSE1 1_OFF BAUD 7 0 or 1 0 0 0 0 7 =
No Use 0 =
No use 11 ST690U User Manual
<exam
[comm
[respon
<notes
** In c should Type a comma 02;1;60;0;3;2 00;010;1;60;0 EVT;850000;0 VT;Res;85000 mple>
mand] ST690E nse] ST690EV s>
nt 4 line m case of even e. be No Use e of non use ed event line nd chat time e. and is set to o other value odel, IN2_T
;2;30;20;20;1 0;3;8;8;30;0;0 1;0;1;0;0;0;0;0 0;6;6;1;0;0;0;0 0;0;0;0;0;0;0;0 0 0;0 0;0;0;0;8;8;0;0 YPE, IN3_TY YPE, IN4_TYP PE, IN5_TYPE E, OUT1_TYP PE and OUT T2_TYPE es are set to o No Use a nd 0 autom matically alth hough these filed of 4-4. W CDMA Par ameter Set tting HD DR DEV_ID VE R SM MS_LOCK SMS_MT1 SMS_MT T2 SMS_ _MT3 SMS_ _MT4 N_CALL_LOCK IN K CALL_ _MT1 CA ALL_MT2 CALL_MT3 CALL_MT T4 CALL_ _MT5 CALL_ _MO1 CALL_MO2
: S Set paramete ers related S SMS or Call. Defin nition Field HDR DEV_ID D VER Definitio ST690WC ons CD MA 6 char. 02 SMS_LO OCK 0 or 1 1 U Unit R Remark C Command ty ype D Device ID P Protocol Ver sion L Lock of Rece D Disable (0) /
I If enabled, S SMS_MT1 ~
mands by SM MS eiving Comm Enable (1) only com MT3 numbe th mmands hat er can be ac ccepted. receives s from SMS_M MT1 SMS_M MT2 SMS_M MT3 SMS_M MT4 String String String String Up to o 20 char. P Phone numb ber for SMS commands Up to o 20 char. P Phone numb ber for SMS commands Up to o 20 char. P Phone numb ber for SMS commands Up to o 20 char. P Phone numb ber for SMS commands IN_CAL LL_LOCK 0 or 1 1 L Lock of Inco D Disable (0) /
I If enabled, o c can be accep ming Call Enable (1) only call fro pted. om CALL_MT T1 ~ MT5 number CALL_M MT1 String Up to o 20 char. P Phone numb ber for call 12 ST690U User Manual String String String String String String Up to o 20 char. P Phone numb ber for call Up to o 20 char. P Phone numb ber for call Up to o 20 char. P Phone numb ber for call Up to o 20 char. P Phone numb ber for call Up to o 20 char. Up to o 20 char. P Phone numb ber for outgo oing call fro m device P Phone numb ber for outgo oing call fro m device WCDMA;850 WCDMA;Res;8 0000;02;0;;;;;0 850000;010;0 0;;;;;;;
0;;;;;0;;;;;;;
Call numbers s are not set,
, that field s hould be em mpty. CALL_M MT2 CALL_M MT3 CALL_M MT4 CALL_M MT5 CALL_M MO1 MO2 mple>
mand] ST690W nse] ST690W s>
en SMS or C CALL_M
<exam
[comm
[respon
<notes
** Whe 4-5. Se ervice Param meter Sett ting H HDR Z ZIP DEV_ID VE ER P PARKING_LO OCK SPEED D_LIMIT PW WR_DN C CON_TYPE GROUP_SEND G D MP_ CHK ANT_CHK BAT_ _CHK M_ _SENSOR CALL GEO_ _FENCE DATA_LOG JAM_C HK_DIST AM_CHK_TM JA M ANTITHF FT_CNT1 A ANTITHFT_CN NT2 JAM _DET Defin nition Field HDR DEV_ID D VER PARKIN NG_LOCK
: S Set paramete ers related re eport. Definit ions U nit Rem mark ST690S SVC 6 cha ar. 02 0 or 1 Com mmand type Devi ce ID Proto ocol Version Parki If 1 perio start park ing lock ena
, the devi odically. Whe s moving ing lock eme able (1) / dis ice checks en the vehic over some ergency. able (0) vehicle po cle goes off velocity, t osition in some boun the device parking ndary or reports SPEED_ _LIMIT Strin g Km m/h Over If 0, If 1 repo r speed limit t does not che the device d ehicle runes and the ve orts speed al erts once. eck over spe over prede eed. efined value,
, device 13 ST690U User Manual PWR_D DN 0 ~
2 CON_T TYPE 0 ~
2 ZIP 0 or 1 GROUP P_SEND 0 or 1 MP_CH HK 0 or 1 ANT_C HK 0 or 1 BAT_CH HK 0 or 1 M_SEN NSOR 0 ~
4 GEO_F ENCE 0 or 1 DAT_LO OG 0 or 1
<exam mple>
Powe 0 : D 1 : E 2 : E pe er saving typ ep and deep Disabled slee nabled deep p sleep p nabled sleep sleep servic ce e with Serve r Conn 0 =
1 =
2 =
Deta nection Type KEEP_CON KEEP_DISCO KEEP_NOP ail explanatio ON on is below. Use Disab Zip ble (0) / Ena able (1) stored data Grou 0 : D 1 : E Grou up Send for Disable nable. One p up send is ex packet can i xplained bel nclude up to ow. o 5 reports. Main Disab n Power Disc ble (0) / Ena connection C able (1) Check GPS Disab Antenna Co ble (0) / Ena onnection Er able (1) ror Check Back Disab kup Battery E ble (0) / Ena Error Check able (1) Moti ion Sensor 0 1 2 3 4 5 6 7 Motion Disable Enable Disable Enable Disable Enable Disable Enable Collision Shock Disable Disable Disable Disable Enable Enable Enable Enable Disabl e Disabl e Enable e Enable e Disabl e Disabl e Enable e Enable e Supp Disab port Geo-fen ble (0) / Ena nce able (1) 232 Log 0 =
1 =
out with RS2 No Use Enable getti ng saved log g data by RS S232 14 ST690U User Manual SVC;850000;
VC;Res;8500 02;1;120;0;0;
00;010;1;120
;0;0;1;1;1;0;0;
0;0;0;0;0;1;1;1
;0;0;0;0;0;0;0 1;0;0;0;0;0;0;0 0;0;0 SEMSOR can n detection eter has bee n be used wi is enabled, d en customiz th the mode device will re zed, This ta el that has m eport to serv able should motion senso ver when ge be disrega or. ets any shoc arded and k or collision n. d follow you should
[comm
[respon
<notes
** Func If shoc
** If t custom oper mand] ST690S nse] ST690SV s>
ction of M_S k or collision this parame mized ration docum ment. CON_T TYPE 1. 2. KEEP_CON KEEP_DISC device disc 3minutes. KEEP_NOP emergency on report option. 3. Group The de area, d If grou time. Group M_Sen nsor 1. 2. Jammi JAM_C At leas If you
*Case o Jammin
*Case o N : The devic CON : The de connects WC In this case, P : The devic y mode or r parameters. ce keeps TCP evice connec CDMA and T
, it cannot re e doesnt se eceive Start It may be u P connection cts TCP conn TCP connect eceive a com end any repo t Report com used for savi n always and nection whe tion if it estim mmand by W ort after be mmand by S ing WCDMA d can receive n the data is mates there WCDMA. installed. Wh SMS or RS23 A fee. Curren hen the dev 32, it starts r nt version ca ice enters report depen nnot suppor nding rt this es a comman s sent. After is no data f nd by WCDM MA. r sending, th e for sending w within Send evice stores evice starts p send opti data if the sending sto on is enable ored data. ed, the devic send is usef ful to speed up sending
. vehicle is i n no WCDM MA area. An nd, the vehic cle moves t to WCDMAa available ce makes 5 r reports to on ne bundle a nd send the ese 5 reports s at one Collision: T Shock: The The device s e device sen sending a ev nding a even vent when ig nt when ignit gnition is ON tion is OFF a N and have a and have a m a motion. motion. ing detectio on procedur re HK_DIST & J st, we recom use two assi JAM_CHK_TM mend use JA ist functions M are assis AM_CHK_DIS
, it can dete st for jammin ng detection y. ST for safety ect two case of jamming as follows. n to avoid fa alse detectio n. of jamming ng detected of jamming WCDMA on
->JAM_CHK WCDMA& G nly. K_DIST -> JA GPS. AM_CHK_TM
-> Triggere ed by JAM_D DET mode. 15 ng detected ST690U User Manual
->JAM_CHK K_TM -> Trig ggered by JA AM_DET mod de. HK_DIST : if HK_TM : if 0 0, skip this 0, skip this fu function. unction. ble all of ass case, its po dditional Pa sist functions ssible to fals arameters s, just trigge se detection ered by HAM n in weak WC M_DET mode CDMA or str e after detect rong radio a ted jamming g. area. HDR DEV_ID VE ER SVR_TY PE B_SVR_T TYPE UDP_ _ACK DEV_ _PORT
: S Setting addit tional param meter request ted. Definit ions Un nit Remar rk ST690A ADP Comm mand type 6 cha ar. 02 T /
U Jammin JAM_C JAM_C If disab In this 4-6. Ad Defin nition Field HDR DEV_ID D VER SVR_TY YPE B_SVR_ _TYPE T /
U UDP_A ACK 0 ~
3 DEV_PO ORT Strin g Device e ID Protoc ol Version Protocol Ty pe Server T : TCP P DP U : UD tocol Type p Server Pro Backup P T : TCP DP U : UD ACK fr 0 : No 1 : ACK 2 : ACK and 3 : ACK Comm om Server w use K when the K when the d alive repor K when the mand respons Device It can If 0 o If not DEV_P es port for re be used onl r empty, the zero, the ORT. when UPD is used. server receiv server receiv rt. server receiv se doesnt n ves reports e ves reports e except alive. except STT ves emergen eed ACK. ncy report. eceiving com y when UDP e device wou device can mmand from P server is us uld use port receive com m UDP server r. sed. 9000. mmands wi th port Reserv ed Reserv ed 0 0 16 ST690U User Manual 0 0 0 0 ADP;850000;
ADP;Res;850
;02;U;T;2;900 0000;022;U;T 00;0;0;0;0;0;0 T;2;9000;0;0;0 0;0;0;0 n be applied from softwa are version 2 22. Reserv ed Reserv ed Reserv ed ed mple>
mand] ST690A nse] ST690 s>
ommand can Reserv
<exam
[comm
[respon
<notes This co ACK in n case of UD DP UDP is comple s protocol t etion of send that doesnt ding with AC t check whe CK dependin ether the da ng on UDP_A ata is transm ACK type. mitted succe essfully. So, the device checks ACK is sent by serv ver when th e data is rec ceived. If the A reache ACK is not d to server a sent during and sends th more than he data aga 2 minutes a in. after sendin g, the devic ce recognize es the data w was not Examp ples of ACK report are a as below. String Format : ST T690ACK;850 0000 Zip For rmat : 0x15 0x85 0x00 0 0x00 It is rec commended d ACK_TYPE is set to 1 t to confirm a all data can be transmitt ted safely. Repor rt Type UDP_AC CK=0 U DP_ACK=1 UDP_AC CK=2 UD DP_ACK=3 Alive STT Event
, Alert, Etc. Emerg gency X X X X X O O O X X O O X X X O 4-7. Se et Paramete ers of Main n Voltage 17 ST690U User Manual HDR DEV_ID VER CHR_STOP_ _THRES_12 CHR_ _STOP_THRES S_24 DECIDE_B BAT_24 OPE ERATION_STO OP_THRES_1 12 O OPERATION_S STOP_THRES S_24 IG GNDET_H IGNDET_L L Defin nition Field HDR DEV_ID D VER
: S Set some val ue of main voltage. Defin ST69 Re nitions 0MBV Co emark ommand typ e 6 c char. De evice ID 0 02 Str ring Str ring Str ring Str ring Str ring Str ring Str ring Pro otocol Versio on oltage value Vo veh hicle. Vo oltage value hicle. veh oltage value Vo 12 V or 24V. to stop ba ackup batter ry charging to stop ba ackup batter ry charging in 12V in 24V to check w whether the vehicles ba attery is oltage value t Vo Th e device op an this value tha to protect ve eration stop e in vehicle t ehicle batter ps if car batte that has 12V ry. ery voltage V power. oltage value t Vo Th e device op an this value tha to protect ve eration stop e in vehicle t ehicle. ps if car batte that has 24V ery voltage V power. is lower is lower rtual ignitio when ve on, the veh ehicle powe ecognize hicle can re is more e er than In dri IGN De case of vi iving state NDET_H. efault = 0 In pa De case of vi rking state w efault = 0 rtual ignitio when vehicle on, the veh e power is le hicle can re ess than IGN ecognize NDET_L. CHR_ST TOP_THRES_ _12 CHR_ST TOP_THRES_ _24 DECIDE E_BAT_24 OPERA ATION_STOP_ _THRES_12 OPERA ATION_STOP_ _THRES_24 IGNDET T_H IGNDET T_L mple>
mand] ST690M nse]ST690M
<exam
[comm
[respon
>
<note IGNDET T_H and IGN MBV;850000 BV;Res;8500 0;02;10.5;22;1 00;122;10.5;2 19;8.00;18.00 22;19;8.00;18 0;0;0 8.00;0;0 NDET_L are 0, device ch heck parking g and driving g automatica ally. 18 ST690U ers of Mot User Manual ion Sensor r et Paramete 4-8. Se HDR DEV_ID VER CHR_STOP_ _THRES_12 CHR_ _STOP_THRES S_24 DECIDE_B BAT_24 OPE ERATION_STO OP_THRES_1 12 O OPERATION_S STOP_THRES S_24 IG GNDET_H IGNDET_L L V I_ON_THRES S VI_ON_DEL LAY VI_ON_PE ERCENT VI_OF FF_THRES VI I_OFF_DELAY Y V VI_OFF_PERC CENT Defin nition Field HDR DEV_ID D VER SHOCK K_DELAY
: S Set motion s sensor param meters Definit ST690M ions MSR Un nit Remar Comm rk mand type Device e ID 6 cha ar. 02 Strin g Protoc ol Version shock detec ction mode after ignitio n off Se c. Delay f 0 Dis Range Recom for entering sable
: 1 ~ 21600 mmend : 600 0 (5hour)
( 10 min.) MOTIO ON_THRES Strin g SHOCK K_THRES Strin g COLL_T THRES Strin g Ste ep Detect Range Recom shock violat ion level of
: 0.04 ~ 2.0 0 mmend : 0.04 4 tion. Ste ep Detect Range Recom shock violat ion level of
: 0.04 ~ 2.0 0 mmend : 0.04 4 tion. Ste ep Gravity Range Recom y for collisio
: 0.1 ~ 2.0 mmend : 0.7 n report. VI_ON_ _THRES Strin g 1/25 VI_ON_ _DELAY Strin g Sec. VI_ON_ _PERCENT Strin g
%
VI_OFF F_THRES Strin g 1/25 hold value fo or Motion Vi rtual Ignition n On 5G Thresh Range Defaul
: 3~50 t : 5 otion Virtual Delay t Range Defaul time for Mo
: 3~999 t : 10 Ignition On nt for Motion n Virtual Ign ition On. Percen Range Defaul
: 30~100 t: 70 5G Thresh hold value fo or Motion Vi rtual Ignition n Off 19 ST690U User Manual Range Defaul
: 3~50 t : 5 VI_OFF F_DELAY Strin g Sec. VI_OFF F_PERCENT Strin g
%
otion Virtual Delay t Range Defaul time for Mo
: 3~999 t : 10 Ignition Off nt for Motion n virtual Igni ition Off. Percen Range Defaul
: 30 ~ 100 t : 70 MSR;;02;600 MSR;Res;8525
;0.04;0.04;0.7 588;128;600;
7;5;10;70;5;10 0.04;0.04;0.7 0;70 70;5;10;70;5;1 10;70
<exam
[comm
[respon
<notes
* For t insensi as it fo mple>
mand] ST690M nse] ST690M s>
the shock le tive or shock dete ection. evel, we rec commend it to set to 0 0.04. if it's over than 0.04, the se ensor will bbe more 4-11. C Control Com mmand HDR R DEV V_ID V VER CMD_ID Defin nition Field HDR DEV_ID D VER CMD_I D
: C Controls som me functions
. Definit ions Un nit Rema rk ST690C CMD Comm mand type 6 cha ar. 01 Strin g Device e ID Protoc col Version Contro ol command d content n : If its not t correct the e Unit ID, ig nored. Status Re equest nition
: L Location poll l, request of the status r report. Caution 4-11-1. Defin 20 Field CMD_I D ST690U Definiti User Manual ons Un it StatusR Req Rema rk Status If rece s request eived, the de evice sends s status string instantly.
<exam
<exam
[comm
[respon 7;1;0 mple>
mple>
mand] ST690C nse] ST690ST 0;15.33;10000 CMD;850000 TT;850000;01 00;2;0002 0;02;StatusRe 10;20090724 eq 4;07:12:16;00 0129;+37.479 9995;+126.88 85815;000.0 29;000.00;
. Reset 4-11-2. Defin nition
: R Reset all of p parameters. Field CMD_I D Definiti ons Un it Rema rk Reset t Reset ze all param Initiali device e. meters with factory val ue and reb oot the
<exam
[comm
[respon mple>
mand] ST690C nse] ST690 CMD;850000 CMD;Res;85 0;02;Reset 0000;010;Re set
. Preset nition 4-11-3. Defin Field CMD_I D
: R Reset all of p parameters. Definiti ons Un it Rema rk Prese et Repor Respo service rt parameter onse include e parameter setting valu es network, rs. It includes ues and curr report, ev s status of d ent device s vent, WCDM device, also. status. MA and
<exam
[comm
[respon mple>
mand] ST690C nse] ST690C NTW;
RPT;6 EVT;1 CMD;850000 MD;Res;8500
;0;internet;;;1 60;180;120;60 1;60;0;3;2;2;30 0;02;Preset 000;010;Pres 111.111.111.1 0;3;0;0;;;;
0;20;20;1;1;1 set;
111;8600;;;;1 234;
;0;0;0;0;0;0;0
;0;0;0;0;0;
21
[respon ST690U User Manual WCD SVC;1 DEV;0 nse] event 4 NTW;
RPT;6 EVT;1 WCD SVC;1 DEV;0
;;
MA;0;;;;;0;;;;;;;
1;120;0;0;0;0;
1;1;1;0;0;0;0 0;0;0;0 line model 111.111.111.1
;0;internet;;;1 0;3;0;0;;;;
60;180;120;60 1;60;0;3;8;8;30 0;0;0;6;6;1;0;0
;;
MA;0;;;;;0;;;;;;;
1;1;1;0;0;0;0 1;120;0;0;0;0;
0;0;0;0 111;8600;;;;1 234;
0;0;0;0;0;0;0;0 0;0;0;0;
<notes
** Afte
** DEV s>
er power on, V filed inform device send ms current st ds response tatus of devi string of pre eset once. w. ce as below OUT1 Disable Enable 0 =
1 =
2 OUT2 0 = Disab le 1 = Enable e PWR_DN 0 =
1 =
2 =
= Normal
= Sleep
= Deep sleep p Field Definiti ons Un it Rema rk BAT_ Backu _CON p battery y is
=
0 disco 1 = B onnected. Backup batte ery is connec cted. Preset tA Repor rt all parame eters includin ng additiona al parameter.r. D CMD_I
<exam
[comm
[respon mple>
mand] ST690C nse] ST690C NTW;
RPT;6 EVT;1 WCD SVC;1 ADP;U DEV;0 0;02;PresetA CMD;850000 000;010;Pres MD;Res;8500 111.111.111.1
;0;internet;;;1 0;3;0;0;;;;
60;180;120;60 1;60;0;3;2;2;30 0;20;20;1;1;1
;;
MA;0;;;;;0;;;;;;;
1;120;0;0;0;0;
1;1;1;0;0;0;0;
U;T;2;9000;0;
0;0;0;0;0;
0;0;0;0;0;0;0;0 0 setA;
111;8600;;;;1 234;
;0;0;0;0;0;0;0
;0;0;0;0;0;
<notes
** This
** DEV s>
s command V filed inform can be app ms current st plied from s tatus of devi rsion 22. oftware ver ce as below w. 22 ST690U User Manual OUT1 Disable Enable 0 =
1 =
2 OUT2 0 = Disab le 1 = Enable e PWR_DN 0 =
1 =
2 =
= Normal
= Sleep
= Deep sleep p BAT_ Backu _CON p battery y is
=
0 disco 1 = B onnected. Backup batte ery is connec cted. T TRACKING Stop Trackin 0 =
1 =
Start Trackin ng ng Anti 0 = Dis 1 = Ena i-Theft sable able Reserve ed Res served
. ACK of Em mergency 4-11-4. Defin Field CMD_I D nition
: S Stop emerge ency report. Definiti ons Un it Rema rk AckEme erg owledgemen evice will sto t of emerge op emergen ency report. ncy reports i f it is in em ergency Ackno The d state.
<exam
[comm
[respon mple>
mand] ST690C nse] ST690C CMD;850000 MD;Res;8500 0;02;AckEme 000;010;AckE rg Emerg 4-11-5. Defin
. Enable1 nition
: A Active Outpu ut1. Field Definiti ons Un it Rema rk Enable e1 Enable e Output1 D CMD_I
<exam
[comm
[respon
[respon mple>
mand] ST690C nse] ST690C nse] ST690C CMD;850000 MD;Res;8500 MD;Res;8500 0;02;Enable1 000;010;Enab 000;010;Enab ble1 ble1NoUse (
(in case that IN type is s set to No U se). 23 ST690U User Manual
<notes
** Outp
** If OU
** If O automa s>
put1 line go UT1 set with OUT1 set wit atically. status. oes to active h immobilize th pulse typ er, output1 li pe, output1 ne goes to a line genera active status tes pulse an s gradually w nd returns i with pulse in inactive stat n driving mo te after puls de. sing out 4-11-6. Defin
. Disable1 nition D Field CMD_I
<exam
[comm
[respon
[respon
<notes
** Outp mple>
mand] ST690C nse] ST690C nse] ST690C s>
put1 line go 4-11-9. Defin
: I nactive Outp put1. Definiti Disable ons e1 Un it Rema Disabl rk le Output1 CMD;850000 MD;Res;8500 MD;Res;8500 1 0;02;Disable1 000;010;Disa able1 able1NoUse 000;010;Disa oes to inactiv ve status. Request I IMSI nition
: R Request the unique SIM ID.
(in case that t IN type is set to No U Use). Field CMD_I D Definiti ReqIM ons MSI Un it Rema Reque If rece rk est IMSI (uni eived, device
) que SIM ID) I of using SIM e sends IMSI M.
<exam
[comm
[respon mple>
mand] ST690C nse] ST690C CMD;850000 MD;Res;8500 I 0;02;ReqIMSI 000;010;ReqI IMSI;724031 1111553779 4-11-10 Defin 0. Request t ICCID nition
: R Request the ICCID. 24 mple>
mand] ST690C nse] ST690C 1. ReqVer nition
<exam
[comm
[respon 4-11-11 Defin Field CMD_I D Field CMD_I D ST690U Definiti User Manual ons Un it ReqICC CID Rema rk Reque If rece est ICCID (se eived, device equence num e sends ICCID mber that is D of using S displayed on SIM. n SIM) CMD;850000 MD;Res;8500 0;02;ReqICCI 000;010;ReqI D ICCID;89550 02300000842 256668
: R Request softw n. ware version Definiti ons Un it Rema rk ReqVe er Reque Device versio est device ve e reports M n. ersion Model, Buye er, Protocol and S/W release
<exam
[comm
[respon mple>
mand] ST690C nse] ST690C CMD;850000 MD;Res;8500 0;02;ReqVer 000;010;ReqV Ver;ST690E_ SAMPLE_STB BASE_001 2. Erase Al l nition 4-11-12 Defin Field CMD_I D
: E Erase all of d data in buffe er. Definiti ons Un it Rema rk EraseA All Erase This is a cust saved all rep s needed to tomer. ports and di initialize ju isable outpu st before de uts. evice is deliv vered to
<exam
[comm
[respon mple>
mand] ST690C nse] ST690C CMD;850000 MD;Res;8500 0;02;EraseAll 000;010;Eras seAll 4-11-13 Defin 3. Initialize e Traveled Distance nition
: I nitialize the travel distan nce. 25 Field ST690U Definiti User Manual ons Un it Rema rk InitDis st Set tra aveled distan nce to 0. CMD;850000 MD;Res;8500 0;02;InitDist 000;010;InitD Dist 4. Initialize e Message Number
: I nitialize the message se quence num mber. Definiti InitMsg ons gNo Un it Rema Set m rk essage num mber to 0. CMD;850000 MD;Res;8500 0;02;InitMsgN 000;010;InitM No MsgNo nition
: r reboot unit. Field Definit ions Un nit Rema rk Reboot Reboo ot device. CMD;850000 MD;Res;8500 0;02;Reboot 000;010;Reb oot 4. Request t SIM IP Ad ddress nition
: R Request of th he local IP a ddress in SI M card. D CMD_I
<exam
[comm
[respon mple>
mand] ST690C nse] ST690C 4-11-14 Defin nition D Field CMD_I
<exam
[comm
[respon mple>
mand] ST690C nse] ST690C 3. Reboot 4-11-23 Defin D CMD_I
<exam
[comm
[respon mple>
mand] ST690C nse] ST690C 4-11-24 Defin Definit ions Un nit Rema rk ReqSIMI IP SIM ca ard IP reque est Field CMD_I D 26 ST690U User Manual
<exam
[comm
[respon mple>
mand] ST690C nse] ST690C CMD;850000 MD;Res;8500 0;02;ReqSIMI 000;010;Req IP SIMIP;172.166.18.6 27 3. Inst 3.1 Inse allation ert SIM card d. ST690U User Manual The Step ere are 5 step ps in insertin ng a SIM card d onto the ST T940 as show wn below in the pictures
. p 1.: Please,
, unscrew SI IM cover. Step 2 2.: Please, in nsert SIM #1
. Step p 3: Please, insert SIM #
#2. Ste ep 4.: Please e, insert SIM M #3 p 5.: Please,
, make an as ssembly with the SIM cov ver. Ste 28 4. Trou 4.1 Blue WCDM uble Shoo e LED: Indic MA ST690U oting (LED ates WCDM Blink Coun User Manual Indicator MA status. nt Remarks s r) Norma al 1 Server Com. Error 2 MA WCDM Error Com. 3 No Ne twork 4 SIM PI N Locked 5 Cannot t NW Attach h 6 No SIM M 7
<Possib 1. Serve 2. Serve 3. Temp le Cause>
er or network er is closed. orary netwo ork barrier k parameter is wrong.
<Possib 1. Netw 2. SIM is 3. Temp 4. Weak 5. netwo le Cause>
ork paramet s blocked ab orary netwo k network sig ork antenna
. ter is wrong. bout networ k using. ork barrier gnal connection is not firm.
<Possib 1. Netw 2. Netw 3. Devic le Cause>
ork antenna ork antenna e is broken. is disconne or socket o ected. of network a ntenna is br roken.
<Possib 1. SIM P le Cause>
PIN is enable ed.
<Possib 1. Weak 2. Netw le Cause>
k network sig ork antenna gnal. connection is not firm.
<Possib 1. There 2. SIM o le Cause>
e is no SIM o or SIM socke or SIM is not et is broken. t inserted pr roperly. 29 ST690U ates GPS sta User Manual atus. D LED: Indica 4.2 RED GPS Norma al No Fix Blink Cou unt Rema rks 1 2
<Poss 1. If some 2. GPS 3. GPS sible Cause>
>
GPS chipset power on, G minutes. S antenna la S antenna co ays on weak onnection is t is trying t to find posi tion during or no GPS s not firm. signal positio on GPS Ch GPS An hipset Error ntenna Error r 4
<Poss 1. GPS 2. GPS 3. Uni sible Cause>
>
disconnecte S antenna is S antenna o r socket of G it is broken. ed. GPS antenna a is broken. 30 ST690U User Manual on. Labelling re vice complie does not cau equirements es with part se harmful in s. 15 of the FC nterference. Information anges or mo user's autho n to user. odifications n ority to opera not expressly ate the equip y approved b ment. CC Rules. O Operation is subject to th he condition that this by the party r responsible for complian nce could 5 Informatio his equipmen nt to part 15 harmful inte radio frequen armful interfe occur in a pa on reception, aged to try to nt or relocate se the separa ct the equip ed. t the dealer o on to the use nt has been t of the FCC erference in ncy energy a erence to rad articular insta
, which can correct the i e the receivin ation betwee pment into a er. tested and fo ound to com C Rules. The ese limits are a residentia al installation and, if not ins stalled and u dio commun ications. How allation. If th is equipmen be determi ined by turn interference by one or mo ng antenna. n the equipm ment and rec an outlet on n a circuit d ply with the e designed t n. This equi used in acco wever, there nt does cause ning the equ ore of the fol limits for a C to provide re ipment gene rdance with is no guaran e harmful int uipment off llowing meas Class B digita easonable p erates uses the instructio ntee that inte terference to and on, the sures:
al device, protection and can ons, may erference o radio or e user is ceiver. different from m that to w which the re ceiver is or an experie enced radio/T TV technicia n for help. c Absorption vice meets t n standards h evaluation re the safety RF Exposure e gram of tis R limit. The h properly wor ons with the b osure require ody and the tain metallic ments may no n Rate (SAR the governm that were de of scientific of all person Information sue. Device highest SAR rn on the bo back of the h ements, use back of the h component ot comply wi R) informatio ment's require eveloped by studies. The ns regardless and Statem types: Track value report ody is 0.1.3 handset kept accessories handset. The s in its asse th FCC RF e on:
ements for e independent e standards s of age or he ment The SA ker (FCC ID:
ted under thi 394W/kg. Th t 0.0cm from s that mainta e use of belt embly. The u exposure req exposure to t scientific or include a su ealth. AR limit of U
: WA2-STU6 s standard d his device w m the body. T ain a 0.0cm clips, holste use of acces quirements, a radio waves rganizations ubstantial saf s. The guide through peri fety margin d lines are iodic and designed USA (FCC) is 690) has also during produc was tested fo To maintain c separation d rs and simila ssories that and should b s 1.6 W/kg a o been tested ct certificatio or typical bo compliance w distance betw ar accessorie do not satis be avoided. averaged d against n for use ody-worn with FCC ween the es should sfy these worn Operati vice was test m separation g the antenn not contain ments may n d or an appro ion al body-worn ted for typica 0.0 cm mus n distance of arty belt-clips na. Third-pa lic compone any metal not comply w with RF expo oved antenna a. operations. t be maintain s, holsters, a ents. Body-w osure require To comply w ned between and similar a worn access ements and with RF expo n the users b accessories sories that should be av osure require body and the used by thi do not me voided. Use ements, a e handset, is device et these only the Cautio 15.19 This dev device d 15.21 Any Cha void the 15.105 Note: Th pursuan against radiate r cause h will not o televisio encoura
-Reorien
-Increas
-Connec connecte
-Consult Specific This dev based o thorough to assur FCC R over one this SAR at the p operatio RF expo user's bo not cont requirem Body-w This dev minimum including should requirem supplied 31 ST690U User Manual EN Section evice complie owing two co any interferen es with Indus onditions: (1 nce, includin stry Canada
) this device g interferenc licence-exe e may not c ce that may c mpt RSS sta cause interfe cause undes andard(s). O erence, and sired operatio peration is s
(2) this dev on of the dev subject to vice must vice. sent appare s de licence. duire de brou me si le bro eil est confo
. L'exploitatio uillage, et (2 ouillage est su orme aux CN on est autor 2) l'utilisateur usceptible d NR d'Industr rise aux de r de l'appare
'en comprom rie Canada eux condition il doit accep mettre le fonc applicables ns suivantes:
ter tout brou ctionnement. aux appare
:(1) l'apparei uillage radio eils radio il ne doit lectrique RSS-GE This de the follo accept a Le pr exempts pas prod subi, m 32
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-07-28 | 1852.4 ~ 1907.6 | PCB - PCS Licensed Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-07-28
|
||||
1 | Applicant's complete, legal business name |
Suntech International Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0017764648
|
||||
1 | Physical Address |
A-1705, A-1706, Greatvally, 32, Digital-ro 9-gil
|
||||
1 |
Seoul, N/A
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
WA2
|
||||
1 | Equipment Product Code |
STU690
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Y**** K********
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
82-2-********
|
||||
1 | Fax Number |
82-2-********
|
||||
1 |
y******@suntechint.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/24/2017 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PCB - PCS Licensed Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Tracker | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is ERP for Part 22 and EIRP for Part 24. Highest reported Body SAR is: 1.394 W/kg | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
DT&C Co., Ltd.
|
||||
1 | Name |
C**** L******
|
||||
1 | Telephone Number |
82313********
|
||||
1 | Fax Number |
82313********
|
||||
1 |
c******@dtnc.net
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | 826.4 | 846.6 | 0.132 | 1 ppm | 4M09F9W | ||||||||||||||||||||||||||||||||||
1 | 2 | 24E | 1852.4 | 1907.6 | 0.218 | 1 ppm | 4M09F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC