User Manual - MFT v1.0 USER MANUAL MFT v1.0 Multi Frequency Transmitter The information in this document is confidential to the person to whom it is addressed and should not be disclosed to any other person. It may not be reproduced in whole, or in part, nor may any of the information contained therein be disclosed without the prior consent of the SuperCom Ltd.
(the Company). A recipient may not solicit, directly or indirectly (whether through an agent or otherwise) the participation of another institution or person without the prior approval of the Any form of reproduction, dissemination, copying, disclosure, modification, distribution and or directors of the Company. publication of this material is strictly prohibited. All rights reserved. Supercom 2013 Confidential & Proprietary Page 1 of 11 User Manual - MFT v1.0 Author Approved by Document version Product Date Ehud Bachman Barak Trabelsi 1.1 MFT v1.0 August 2014 Document version management Date Version Comments Author 26.6.2014 18.8.2014 1.0 1.1 Initial version Updated Ehud Bachman Ehud Bachman Confidential & Proprietary Page 2 of 11 User Manual - MFT v1.0 Table of Contents 1 2 2.1 1.1 1.2 1.3 1.4 Introduction .................................................................................................................. 4 About this Guide ..................................................................................................... 4 Important Information.............................................................................................. 4 Safety Precautions.................................................................................................. 4 FCC Warnings ........................................................................................................ 6 Technical Specifications ............................................................................................. 7 Interfaces and MMIs ............................................................................................... 7 RF .................................................................................................................... 7 2.1.1 Interfaces & Connectors .................................................................................. 7 2.1.2 2.1.3 Tampers & Sensors ......................................................................................... 7 2.1.4 MMI ................................................................................................................. 7 Power Requirements .............................................................................................. 7 3 Installation .................................................................................................................... 8 4 Configuration ............................................................................................................... 9 5 References ................................................................................................................. 10 Acronyms and Abbreviations ................................................................................ 10 6 Appendix A: ................................................................................................................ 11 2.2 5.1 Confidential & Proprietary Page 3 of 11 FW & HW Test Plans - MFT v1.0 1 Introduction 1.1 About this Guide This User Guide contains important information for installers and users of the PRF-MFT10 product and all of its series. MFT stands for Multi Frequency Transmitter. This guide introduces the PRF-MFT10 and provides instructions on how to install, configure, operate, and troubleshoot the device. Each section has both written and graphically explanations to provide the technical information necessary to be successful at using, installing, and configuring the PRF-MFT10 device. 1.2 Important Information SuperCom Inc. reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to SuperCom Inc.s terms and conditions of sale supplied at the time of order acknowledgment. SuperCom Inc. warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with SuperCom Inc.s standard warranty. Testing and other quality control techniques are used to the extent SuperCom Inc. deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. SuperCom Inc. assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using SuperCom Inc. components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. SuperCom Inc. does not warrant or represent that any license, either express or implied, is granted under any SuperCom Inc. patent right, copyright, mask work right, or other SuperCom Inc. intellectual property right relating to any combination, machine, or process in which SuperCom Inc. products or services are used. Information published by SuperCom Inc. regarding third-party products or services does not constitute a license from SuperCom Inc. to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from SuperCom Inc. under the patents or other intellectual property of SuperCom Inc. Resale of SuperCom Inc. products or services with statements different from or beyond the parameters stated by SuperCom Inc. for that product or service voids all express and any implied warranties for the associated SuperCom Inc. Product or service and is an unfair and deceptive business practice. SuperCom Inc. is not responsible or liable for any such statements. All company and brand products and service names are trademarks or registered trademarks of their respective holders. 1.3 Safety Precautions
! IMPORTANT:
The equipment contains communication devices. Any changes or modifications made to the equipment without the written consent of SuperCom Inc. or SuperCom Ltd., or Vuance Ltd., and its resellers or distributors, can nullify the users authority to operate this equipment. The user assumes all risks associated with the use and handling of the equipment, and specifically acknowledges that SuperCom Inc. & SuperCom Ltd. & Vuance Ltd., and its resellers User Manual - MFT v1.0 or distributors, will not be liable for any damages of any kind, including personal injury or property damages resulting from use of the equipment.
! IMPORTANT:
Carefully read the safety information contained in this section, and throughout this user guide, before installing, operating, or performing any maintenance task on the equipment.
! IMPORTANT:
Operations not performed as per the instructions in this user guide are done at the users own risk and liability.
! IMPORTANT:
Only trained, authorized personnel should install, maintain and repair the equipment.
!
Unit shall be powered by a certified Limited Power Source supply adapter only (marked L.P.S)
! IMPORTA Once you have thoroughly reviewed this user guide, if you have any questions, please contact your reseller. Confidential & Proprietary Page 5 of 11 User Manual - MFT v1.0 1.4 FCC Warnings The FCC Wants You to Know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician. FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. Confidential & Proprietary Page 6 of 11 User Manual - MFT v1.0 2 Technical Specifications 2.1 Interfaces and MMIs 2.1.1 RF 1 x RF 433MHz ASK\FSK Receiver module 2 x LF 125KHz OOK Transmitter module 2.1.2 Interfaces & Connectors RS-485 2 x Relay outputs / 3 x OC drivers 2 x Wiegand Outputs Ultra-Sonic module connector Power adapter socket 2.1.3 Tampers & Sensors Case tamper (Optional) Ultra-Sonic module (Optional) 2.1.4 MMI Push Button Indication LEDs Internal Buzzer 1 x DIP Switch Operational temperature:
-20C to +60C 2.2 Power Requirements 12V DC, 2A. Confidential & Proprietary Page 7 of 11 User Manual - MFT v1.0 3 Installation Unit shall be powered by a certified Limited Power Source supply adapter only (marked L.P.S). NOTE:
Confidential & Proprietary Page 8 of 11 User Manual - MFT v1.0 4 Configuration Confidential & Proprietary Page 9 of 11 User Manual - MFT v1.0 5 References 5.1 Acronyms and Abbreviations API ADC RF CPU CAD CISC DAC ETSI FCC GUI I/O IRQ ISO Kbps LED Application Programmer Interface Analog to Digital Conversion Radio Frequency Central processing unit Computer Aided Design Complex Instruction Set Computing Digital to Analog Convertor European Telecommunications Standards Institute Federal Communications Commission Graphical User Interface Input/output Interrupt Request International Organization for Standardization kilobit per second Light Emitting Diode MCU Micro Controller unit man machine interface Random Access Memory Read Only Memory MMI RAM ROM Confidential & Proprietary Page 10 of 11 User Manual - MFT v1.0 6 Appendix A:
Model Name: PRF-MFT10 MFT Types:
PRF-MFT10A, PRF-MFT10R, PRF-MFT10F. The tables below describe the sensor combination that can be for any PRF-MFT10, For PRF-MFT10XX series:
Confidential & Proprietary Page 11 of 11