FCC ID: YJW-09638PG-VN Fast Magnetic Wireless Charger

Fast Magnetic Wireless Charger with Built-in Kickstand H S I L G N E Specs Input: 12V/1.67A Output: Up to 15W (Fast Charge)

*Charging time may vary based on device

**NOTE: A 20W or higher USB-C Power Adapter is recommended

(sold separately) to enable fast wireless charging. Caution DO NOT place any credit cards or other types of magnetic material near the charging pad. Do not attempt to disassemble the wireless charging pad as it may short circuit or damage the product. Keep at least 8 (20cm) distance between implantable medical devices such as pacemakers, cochlear implants, etc. Keep this product in a dry and ventilated space. Do not place in direct heat or use in high humidity environments. Do not use organic solvents to clean surface. 2 3 E N G L I S H Using your Fast Magnetic Wireless Charger 1. Plug the USB-C connector into the wall charger (not included). 2. Plug in the wall charger (20W PD charger recommended). 3. Place the PureGear Magnetic Wireless Charger onto the back of your MagSafe device until it automatically aligns and snaps into place. FCC Interference Statement This equipment generates, uses and can radiate radio frequency energy; if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. H S I L G N E If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into and outlet on a circuit different form that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. A distance of 15 cm shall be maintained between the antenna and users, and the transmitter may not be colocated with any other transmitter or antenna. 4 5 IC Statement This device contains license-exempt transmitter(s)/receiver(s)/

that comply with Innovation Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:

E N G L I S H

(1) This device may not cause interference and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment; To maintain compliance with ICs RF Exposure guidelines:

(1) This equipment should be installed and operated with a minimum distance of 10cm from your body.

(2) This device and its antenna(s) must not be located or operated in conjunction with any other antenna or transmitter. Lifetime Warranty This product is fully warranted against defects in materials and workmanship for the lifetime of the product, so long as the manufacturer continues to make this product. If a product fails due to a manufacturing defect, we will replace it upon proper proof of purchase by the original purchaser. Replacement product will be subject to shipping and handling charges. Damages through normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than the authorized service center, or act of God, are not covered by this warranty. For all warranty claims, the product must be returned in accordance with PureGears return policy. H S I L G N E All trademarks and trade names are used for reference purposes only and are the property of their respective owners. 6 7 Chargeur magntique rapide sans fil avec bquille intgre Caractristiques Entre : 12V/1,67A Sortie : Jusqu 15 W (charge rapide)

*Le temps de charge peut varier selon lappareil

**REMARQUE : Un adaptateur dalimentation USB-C de 20 W ou plus est recommand (non inclus) pour permettre une charge rapide sans fil. Mise en garde NE placez PAS de carte de crdit ou tout autre type de matriau magntique prs du socle de charge. Nessayez pas de dmonter le socle de charge sans fil car vous risqueriez de provoquer un court-

circuit ou dendommager le produit. Gardez une distance dau moins 8 po (20 cm) entre les appareils mdicaux implantables tels que les stimulateurs cardiaques, les implants cochlaires, etc. Gardez ce produit dans un endroit sec et bien ventil. Ne le placez pas prs dune source de chaleur directe ou dans des endroits soumis des taux dhumidit levs. Nutilisez pas de solvants organiques pour nettoyer la surface. S I A N A R F 8 9 Utilisation de votre chargeur magntique rapide sans fil 1. Branchez le connecteur USB-C dans le chargeur mural (non inclus). 2. Branchez le chargeur mural (un adaptateur dalimentation USB-C de 20 W ou plus est recommand). 3. Dposez le chargeur magntique sans fil PureGear sur la face arrire de votre appareil MagSafe jusqu ce quil saligne senclenche automatiquement. F R A N A I S Dclaration relative aux limites des interfrences tablies par la FCC Cet quipement gnre, utilise et peut mettre de lnergie radiolectrique et, sil nest pas install et utilis tel quil est indiqu dans le guide dutilisation, il peut causer des interfrences dans les communications radio. Cependant, il nexiste aucune garantie que des interfrences ne se produiront pas dans une installation particulire. Si cet quipement cause effectivement des interfrences nuisibles lors de la rception dmissions radio ou tlvises (et il suffit, pour sen rendre compte dallumer et dteindre lappareil), lutilisateur devra tenter de corriger ces interfrences en prenant lune ou plusieurs des mesures suivantes :

Rorienter ou changer la position de lantenne rceptrice. Augmenter la distance entre lquipement et le rcepteur. Brancher lquipement sur une prise de courant appartenant un circuit diffrent de celui sur lequel est branch le rcepteur. Demander lassistance du fournisseur ou dun technicien de tl ou de radio expriment. Une distance de 15 cm doit tre maintenue entre l'antenne et l'utilisateur et l'metteur ne doit pas tre au mme endroit que tout autre metteur ou antenne. S I A N A R F 10 11 Dclaration IC Cet appareil contient des metteur(s)/rcepteur(s) exempts de licence qui sont conformes au(x) CNR Appareils exempts de licence de lorganisme Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement de lappareil est soumis aux deux conditions suivantes :

(1) Cet appareil ne doit pas causer dinterfrences et

(2) Cet appareil doit accepter toutes les interfrences y compris celles pouvant provoquer un fonctionnement indsirable de lappareil. F R A N A I S Exposition aux radiations : cet quipement est conforme aux limites de radiation dfinies par le Canada pour un environnement non contrl; pour garantir la conformit avec les directives rgissant les limites dexposition aux radiofrquences dIndustrie Canada :

(1) Cet quipement doit tre install et utilis une distance minimale de 10 cm de votre corps.

(2) Cet appareil et son ou ses antennes ne doivent pas tre placs ou utiliss en conjonction avec une autre antenne ou un autre metteur. Garantie vie Ce produit est entirement garanti contre les dfauts de matriaux et de fabrication pour la dure de vie du produit, tant que le fabricant continue fabriquer ce produit. Si un produit prsente des dfaillances dues un dfaut de fabrication, nous le remplacerons sur prsentation dune preuve dachat par lacheteur original. Le produit de remplacement sera soumis des frais dexpdition et de manutention. Les dommages rsultant dune usure normale, dune altration, dune utilisation abusive, dune ngligence, dun accident, dun service effectu par une personne autre que le centre de service agr ou dun cas de force majeure ne sont pas couverts par la prsente garantie. Pour toute demande de garantie, le produit doit tre retourn conformment la politique de retour de PureGear. Toutes les marques de commerce et tous les noms commerciaux sont utiliss des fins de rfrence uniquement et appartiennent leurs propritaires respectifs. S I A N A R F 12 13 Cargardor inalmbrico magntico rpido con anillo de apoyo plegable Especificaciones Entrada: 12V/1.67A Salida: Hasta 15W (carga rpida)

*El tiempo de carga puede variar segn el dispositivo

**NOTA: Se recomienda un adaptador de corriente USB-C de 20W o superior (se vende por separado) para permitir una carga inalmbrica rpida. Precaucin NO coloque tarjetas de crdito u otros tipos de materiales magnticos cerca de la base de carga. No intente desensamblar la base de carga inalmbrica pues esto podra causar un cortocircuito o daar el producto. Mantenga a una distancia mnima de 20 cm (8) entre dispositivos mdicos implantables como marcapasos, implantes cocleares, etc. Mantenga este producto en un lugar seco y ventilado. No lo coloque cerca del calor directo ni lo use en ambientes con un nivel alto de humedad. No use solventes orgnicos para limpiar la superficie. L O A P S E 15 Cmo usar su cargador inalmbrico magntico rpido 1. Enchufe el conector USB-C al cargador de pared (no incluido). 2. Enchufe el cargador de pared (se recomienda un adaptador de corriente USB-C de 20 W o ms). 3. Coloque el cargador inalmbrico magntico PureGear en la parte posterior de su dispositivo MagSafe hasta que se alinee automticamente y encaje en su lugar. E S P A O L Declaracin de interferencia de la FCC Este equipo genera, usa y puede emitir energa de radio frecuencia, y si no se instala y usa de conformidad con las instrucciones podra provocar interferencia perjudicial en las comunicaciones de radio. Sin embargo, no se garantiza que dicha interferencia no ocurrir en una instalacin en especfica. Si este equipo ocasiona interferencia perjudicial a la recepcin de radio o televisin, lo cual se puede determinar apagando y encendiendo el equipo, se sugiere que el usuario trate de corregir la interferencia mediante una o ms de las siguientes medidas:

Colocar u orientar la antena receptora en otro lado. Aumentar la separacin entre el equipo y el receptor. Conectar el equipo a una salida o circuito distinto al que est L O A P S E conectado el receptor. Solicitar ayuda a su distribuidor o a un tcnico de radio o televisin con experiencia. La antena debe mantenerse a una distancia de 15 cm del usuario y el transmisor no debe estar en la misma posicin que ningn otro transmisor o antena. 16 17 Declaracin de la IC Este dispositivo contiene transmisor(es)/receptor(es) exentos de licencia que cumplen con los RSS exentos de licencia de Innovation Science and Economic Development Canada. La operacin est sujeta a las siguientes dos condiciones:

(1) Este dispositivo no debe provocar interferencia daina, y

(1) Este dispositivo debe aceptar la interferencia recibida, incluyendo la interferencia que pudiera provocar una operacin indeseable. E S P A O L Exposicin a la radiacin: Este equipo cumple con los lmites de exposicin a la radiacin de Canad establecidos para un ambiente no controlado. Para mantener el cumplimiento de las pautas de exposicin a radiofrecuencia de IC:

(1) Este equipo se debe instalar y operar a una distancia mnima de 10 cm de su cuerpo.

(2) Este dispositivo y su(s) antena(s) no se debe(n) colocar ni operar junto con ninguna otra antena o transmisor. Garanta de por vida Este producto est completamente garantizado contra defectos en materiales y mano de obra durante la vida til del producto, siempre y cuando el fabricante contine fabricando este producto. Si un producto falla debido a un defecto de fabricacin, lo reemplazaremos con la comprobacin de compra adecuada del comprador original. El producto de reemplazo estar sujeto a cargos de manejo y envo. Esta garanta no cubre los daos por uso y desgaste normal, alteracin, mal uso, negligencia, accidente, servicio realizado por alguien que no sea el centro de servicio autorizado o caso fortuito. Para todos los reclamos de garanta, el producto debe devolverse de acuerdo con la poltica de devolucin de PureGear. Todas las marcas y nombres comerciales se utilizan con fines de referencia y son propiedad de sus respectivos propietarios. L O A P S E 18 19 pure-gear.com 2023 F00181PGed3

Superior communications. Section 2.911(d)(5)(i) Certification Equipment Type Company name: Superior communications. Address: 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Product Name: Fast Magnetic Wireless Charger FCC ID: YJW-09638PG-VN Model(s): 09638PG-VN 2.911(d)(5)(i) Equipment Type We, [Superior communications.] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered ListNOTE 1 Yours sincerely, Name: George Chen Date: Feb. 16, 2023 Title: VP Product Development Company name: Superior communications. Signature:

NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911(d)(5)(i)EquipmentTypeAttestationv1.2

Superior communications. Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: Superior communications. Address: 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Product Name: Fast Magnetic Wireless Charger FCC ID: YJW-09638PG-VN Model(s): 09638PG-VN 2.911(d)(5)(ii) Applicant filing We, [Superior communications.] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identifiedNOTE 1on the Covered ListNOTE 2,established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: George Chen Date: Feb. 16, 2023 Title: VP Product Development Company name: Superior communications. Signature:

NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911(d)(5)(ii)ApplicantAttestationv1.3

Superior communications. Section 2.911(d)(7) USA Agent for Service of Process Company name: Superior communications. Address: 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Product Name: Fast Magnetic Wireless Charger FCC ID: YJW-09638PG-VN Model(s): 09638PG-VN 2.911(d)(7) USA Designated Agent for Service of Process We, [Superior communications.] (the applicant) designate [Superior communications.]NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Superior communications. Applicant Company name: Superior communications. Address:5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Address: 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States 2.911(d)(7)USAAgentv1.3 Superior communications. FCC Registration Number FRN:

0019944727 Contact Name: George Chen Telephone No: 818-636-4985 Email: Gchen@scp4me.com FCC Grantee Code: YJW Contact Name: George Chen Telephone No: 818-636-4985 Email: Gchen@scp4me.com Signature:

Signature:

Title: VP Product Development Date: Feb. 16, 2023 Title: VP Product Development Date: Feb. 16, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911(d)(7)USAAgentv1.3

Superior communications. Agent Authorization Company: Superior communications. Address: 5027 Irwindale Ave.Suite, Irwindale Ave, California, 91706, United States Product Name: Fast Magnetic Wireless Charger Model Number(s): 09638PG-VN Product Description: Fast Magnetic Wireless Charger We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

George Chen Title:

VP Product Development Company:

Superior communications. Date: Feb. 16, 2023

Superior communications. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: YJW-09638PG-VN Date: Feb. 16, 2023 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: George Chen Title: VP Product Development