FCC ID: XO9-DSCF-003 A cat flap with an integrated short range RFID reader

DSCF ENGLISH Safety Guide tool version V 1.7 IMPORTANT SAFETY INFORMATION It is your responsibility to exercise discretion and observe all safety measures required by law and common sense. Please read the following information carefully and retain this manual for future reference. This product is intended for use by domestic pets only. WARNING:

Your DSCF is not a toy. Do not allow children to play with the Product. Your DSCF includes some small components. To avoid the risk of choking take care to keep any loose parts away from young children or pets and dispose of all packaging appropriately. This product can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be undertaken by children without supervision. CHILD PROOFING:

In households with young children, you must include the DSCF in childproofing considerations. Misuse of this product by a child may result in persons coming into contact with potential dangers. Young children should be monitored at all times when in the immediate vicinity of the DSCF. BATTERIES:

The DSCF requires 4 good quality 1.5 V LR6 alkaline AA cells to operate. The product is not designed for use with Rechargeable batteries. Always change all 4 batteries at the same time and avoid mixing battery types or manufacturers. To insert or change the batteries, remove the battery cover from the front of the product to access the battery compartment. Ensure the +/- symbols on the new batteries match the symbols on the DSCF Non-rechargeable batteries are not to be recharged. To avoid the risk of fire always take care to ensure batteries are fitted the correct way round as marked on the DSCF and never short circuit the battery terminals. If the batteries are exhausted, or there is a problem with how they have been inserted, the light adjacent to the battery compartment will flash red every 5 seconds as a Low battery indication. There is a risk of explosion if the battery is replaced by an incorrect type. Always use good quality batteries from a reputable battery manufacturer to ensure the best performance. Exhausted or out-of-date batteries must be removed and disposed of properly in accordance with local legislation. If the appliance is to be stored unused for a long period, the batteries must be removed. In case of battery leaks, wear appropriate Personal Protective Equipment (PPE) to protect yourself from any exposure to harmful chemicals before disposing of the batteries and cleaning any spillage. When cleaning up a spillage, avoid contact with skin, eyes or any risk of ingestion. Contact a medical professional immediately if this should occur. Do not use this product if parts are missing, damaged or worn. Only use approved Sure Petcare accessories and spare parts with you DSCF. PETS: To ensure your pet's safety Clean unit with Pet friendly cleaning products and a damp cloth only, do not immerse in water. Sure Petcare recommends the DSCF is used with your pets implanted microchip, however it may also be operated using the Sure Petcare RFID Collar Tag. If using a collar tag, it must be used with a safety collar which incorporates a breakaway buckle. Sure Petcare cannot accept liability for any injury or death caused by a pet's collar. Custom software settings are available from customer support to alleviate most unwanted pet behaviour Before Installation or using the product please download and read the user instructions, these are available from www.surepetcare.com/pdf. Disposal of old Products and used Batteries:

Either of these symbols on a product indicates it is subject to the following legislation:

Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE) & Directive 2006/66/EC on Batteries and Accumulators require households to dispose of electrical products and waste batteries in an environmentally responsible manner. These items should not be placed in household waste bins and must be recycled at an appropriate recycling facility. Further information on recycling can be found at: www.recycle-more.co.uk . FCC compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device has been designed and complies with the safety requirements for RF exposure in accordance with FCC rule part 2.1093 and KDB 447498 D01 IC compliance: CAN ICES-3(B)/NMB-3(B): This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation of the device. To meet RF exposure guidelines, a separation distance of 200 mm should be maintained. This device complies with the safety requirements for RF exposure in accordance with RSS-102 Issue 5 for portable use conditions. Conformit IC: CAN ICES-3(B)/NMB-3(B): Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Pour respecter les consignes dexposition aux RF, une distance de sparation de 200 mm doit tre maintenue. Cet appareil est conforme aux exigences de scurit concernant lexposition aux RF selon la norme RSS-102, 5me dition, pour des conditions dutilisation portable. RF Identification: 126 & 133 kHz ; Maximum Radio Frequency Power: 38.7 dB(A/m) @10m Hereby, SureFlap Ltd. trading as Sure Petcare, declares that the radio equipment type DSCF is in compliance with the EU Directive 2014/53/EU and UK Radio Equipment Regulations 2017 (as amended). The full text of the EU declaration of conformity is available at the following internet address www.surepetcare.com/ecdoc. EU Authorised representative Allflex Europe, 35 Rue des Eaux, F35500 Vitr. The Sure Petcare DSCF incorporates selective entry features which have been designed to minimise the risk of intruder pets entering your house. However, it is not possible to fully guarantee the exclusion of all other animals in all circumstances. In the rare event of an unauthorised pet gaining access to the house, or any pets experiencing an unintended exit, Sure Petcare cannot accept liability for any damage, harm or inconvenience which may be incurred.

1 2 3 4 5 6 REVISIONS Rev. ECN No. Date Changed by 01

24/08/2020 A.Bliss FCC NUMBER IC NUMBER RCM MARKING CE MARKING WEEE MARKING PATENT INFORMATION AND URL UKCA MARKING PRODUCT CODE

) x 4

0 6

. 0

. 0 2 SURE PETCARE URL EFUP 10 MARKING R-NZ MARKING 163.0 C NOTES:

FONT: ARIAL TO BE APPLIED TO: REAR COVER - 00437-DC UL Flammability Rating N/A COMPLIANCE INFORMATION Conformity Markings EFUP 10, R-NZ, RCM, CE, WEEE, UKCA Sure Petcare 7 The Irwin Centre Scotland Road, Dry Drayton Cambridge, CB23 8AR, UK Tel: +44(0)1954 211664 info@surepetcare.com www.surepetcare.com Tolerances unless otherwise specified:

Over Up to 0 6:

6 30:

30 120:

120 315:

315 1000:

1000 2000:

Angular:

Grade II 0.1 0.2 0.3 0.5 0.8 1.2 1 Third Angle Projection CONFIDENTIAL DO NOT SCALE Copyright 2018 Sureflap Ltd. trading as Sure Petcare Changes:

Rev01 - Initial Release Material Data Sheet 1 T:\Engineering\Mechanical & Product Design\Datasheets\Labels\Polyester\1510134400-4192.pdfNot Available 1 2 4 5 50 Top Coated Polyester Film Silver Matt Sticker Material Manufacturer:

Customark 3M G62SB 0.72 g 716.69 mm Silver Matt on Print Side, Adhesive on Non Print Side Weight:

Volume:

Finish/

Coating:

Colour:

Print Black Product:

Description:

Part Number:

Format:

A4 Units:

mm Scale:

1:1 Sheet:

1 of 1 Material Type:

Material Grade:

Drawn by:

A.Bliss Supersedes:

N/A 3 DualScan 2 Model Filename:

10874-DC Dual Scan Compliance Label 10874-DC Revision:

01 6 A B D A B i g n w a r D s k r o W d i l o S e p a c s d n a l 4 A e r a c t e P e r u S

e t l a p m e T

SureFlap Ltd Ground Floor Building 2030 , Cambourne Business park, Cambourne, CB23 8DW, United Kingdom Compliance label location Detail information taken from Rear Assembly drawing number 10913-DA_01

SureFlap Ltd Ground Floor Building 2030 , Cambourne Business park, Cambourne, CB23 8DW, United Kingdom Authorisation Letter To whom it may concern This is to certify that SureFlap Ltd. herby authorises TUV SUD to act as the TCB for the application of the Dual Scan Cat Flap v2, FCC ID XO9-DSCF1003 to the FCC We certify that SureFlap Ltd is not subject to a denial of Federal benefits, that include the FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C. 862 because of a conviction for the possession or distribution of a controlled substance. See 47 CFR1.2002(b) for the definition of part for these purposes. Yours faithfully, Dr. David Hallas, Managing Director

Federal Communications Commission Authorization and Evaluation Division 21st April 2021 Subject: Confidentiality Request re application for certification of FCC ID: XO9-DSCF-1003 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Part List File Name(s) DSCF v2 BlockDiagram 01761-EB_01 DSCF2 Microchip DualScan Catflap Main PCB eBOM 01321-EB_01 iDSCF Tunnel Sensor - Receiver eBOM 01318-EB_01 iDSCF Tunnel Sensor - Emitter eBOM 00834-EB_03 iDSCF Front Sensor - Receiver eBOM 00831-EB_03 iDSCF Front Sensor - Emitter eBOM DSCF001_WT_03 DualScan Microchip Catflap Top Level BOM 10908-DA_01 DualScan 2 General Assembly iDSCF mechanical BoM DSCF2 schematic iDSCF - PCB Layout Schematic and PCB data The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Yours faithfully, David Hallas Managing Director

SureFlap Ltd 7 the Irwin Centre Scotland Road Dry Drayton CB23 8AR, Cambridgeshire To whom it may concern DSCF v2 and iDSCF Similarity Justification The Sure Petcare DSCF v2 is produced as a downgraded version of the pre existing iDSCF design. The product is functionally identical to the existing iDSCF save for the deletion of the 802.15.4 2.4 GHz transceiver function removing all networking capability. The DSCF v2 is mechanically identical to the iDSCF and uses identical bare PCBs but with the components for the 2.4 GHz transceiver and for decoding TROVAN Microchips deleted. The RFID performance of the unit is not affected by these changes. Yours faithfully, Dr. David Hallas, Managing Director SureFlap Ltd. Trading as Sure Petcare Company No. 06399085

SureFlap Ltd Ground Floor Building 2030 , Cambourne Business park, Cambourne, CB23 8DW, United Kingdom Operating description FCC details FRN: 0019054196 FCC ID: XO9-DSCF1003 Model ID: DSCF v2 This device is a pet door with an integrated RFID reader that operates at 126 kHz or 133 kHz. The reader is normally used together with a sub-dermal RFID implant in the pet that is not provided with the product. The antenna is integrated into a short tunnel and may not be modified by the user. This tunnel goes through the door or wall that the pet door is installed in. The product has 2 read antennas and reacts to pets moving in both directions through the tunnel The pet door incorporates an infrared proximity detector that monitors for the presence of the pet. When the pets presence has been determined then the RFID reader tries to read the tag ID number and compares it to a previously stored list. If the ID tag matches one of the stored codes then a motorised lock is opened and the pet is allowed in or out. The button when pressed puts the device into a learn mode. In this mode when a pet goes through the door the reader reads the pets ID tag number and stores it in the list of allowed animals. This list can be wiped, if necessary, by holding down the same button. The device is battery powered and does not have any external connections. Yours faithfully, Dr. David Hallas, Managing Director