KL-151/KL-153 User Manual PACKING LIST The complete KL-151/KL-153 switch package consists of KL-151/KL-153 switch Power Adapter User Manual Please check to make sure that all the components are present and that nothing was damaged in shipping. If you encounter a problem, contact your dealer. Read this manual thoroughly and follow the installation and operation procedure carefully to prevent any damage to the unit, and/or any of the devices that connect to it. FEATURES Can simultaneously control two 8-port or 16-port RJ45 type KVM Be compatible with PS/2 / USB mouse and keyboard. Superior video quality. OVERVIEW Transmitting End:
1. RJ45 Port of Transmitting End Put one side CAT5 cable into this RJ45 port, put another side CAT5 interface into Receivers RJ45 port 2. LED on-line instruction light The light is on when its connected with Receiver 3. LED Power Light The light is on when its connected with PC 4. VGA Port Connect with HDB-15 port of PC 5. Mouse & Keyboard Interface Connect with USB port of PC Receiving End:
KL-151 KL-153 1. Adjustable Turn-knob Video Contrast adjustment 2. Adjustable Turn-knob Three color primaries adjustment 3. Receiver RJ45 Port Receive the signal from transmitting end. 4. LED Power Instruction LED is light when its powered on. 5. Power Interface DC port 6. USB Port The USB mouse & keyboard plug into these ports. 7. PS/2 Port The PS/2 mouse & keyboard plug into these ports. 8. VGA Port It is used to plug the monitor. INSTALLATION SINGLE INSTALLATION 1. Plug your PS/2 / USB keyboard, PS/2 / USB mouse and monitor into the console port section located on the 2. Plug one end of the CAT5 UTP into the available RJ45 port on the switch. 3. Plug the other end of the CAT5 UTP into the RJ45 port on the matching dongle. Connect the dongle to the units rear panel. computer. INSTALLATION TOGETHER WITH KS-3108 / KS-3116 1. Plug your PS/2 / USB keyboard, PS/2 / USB mouse and monitor into the console port section located on the units rear panel. 2. Plug one end of the CAT5 UTP into the available RJ45 port on the switch. 3. Plug the other end of the CAT5 UTP into the RJ45 port on KS-3108 / KS-3116. ILLUSTRATION OPEARTION User can use hot key to do some switching operation. Port Switch: Quickly press L CTRL and release it, and then press R CTRL to switch between the two ports. Remote and Local Switch: When connected to KS-3108 / KS-3116, double click F12 to shift between local control and remote control. SPECIFICATION Type KL-151 Keyboard, Mouse PS/2,USB Female KL-153 PS/2,USB Female Connectors Video Standard Video CAT5 Video Adjustable Signal type Minimum input level Max input level I/O impedance Resolution Line Frequency Field Frequency Distance Power Storage Temp Working Temp Dimension Weight 1 x HDB-15 Female(Blue) 1 x HDB-15 Female(Blue) RJ45 No VGA 0.5Vp-p 1.0Vp-p 75 1280*1024 30-100KHz 40-120Hz MAX 100M DC5V 2000mA
-20C~60C
-10C~50C RJ45 Adjustable Knobs VGA 0.5Vp-p 1.0Vp-p 75 1280*1024 30-100KHz 40-120Hz MAX 300M DC5V 2500mA
-20C~60C 0C~50C 125mm*74mm*23mm 125mm*74mm*23mm 580g 600g Color Housing Black Metal Transmission Distance:
Cable Distance (m) Resolution60Hz CAT5/5e-CAT6 50 150 300 1920*1080 1280*1024 800*600 The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
** Reorient or relocate the receiving antenna.
** Increase the separation between the equipment and receiver.
** Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
** Consult the dealer or an experienced radio/TV technician for help.