Install SIM cards / memory card. SIM cards Connect your Logic phone to the computer using the USB cable. Thank you for purchasing this innovative LOGIC device. The specifications in this document are subject to change without prior notice. LOGIC and the LOGIC logo are registered trademarks of Swagtek, Other trademarks are the property of their respective owners. Inc. Charge for 24 hours before using. Micro SD card Get to know your Logic phone AUDIO JACK 3.5 MM MICRO USB PORT CAMERA VOLUME +/-
Copy music files from your computer to your Logic phone. L55B 5.45 4G SMARTPHONE 5.45 TOUCHSCREEN POWER /
LOCK KEY QUICK GUIDE | GUA RPIDA Instalar tarjetas SIM / tarjeta de memoria. Conecte su telfono Logic a una computadora utilizando el cable USB. tarjetas SIM Gracias por haber adquirido este innovador producto de LOGIC. Las especificaciones en este manual estn sujetas a cambios sin previo aviso. LOGIC y el logotipo de LOGIC son marcas registradas de Swagtek, Inc. El resto de las marcas comerciales son propiedad de sus respectivos dueos. Tarjeta Micro SD Cargue por 24 horas antes de usar. Conozca su telfono Logic. ENTRADA DE AUDIO 3.5 MM PUERTO MICRO USB CMARA VOLUMEN +/-
Transfiera sus archivos de msica desde su computadora a su telfono Logic. PANTALLA TCTIL DE 5.45 ENCENDER /
BLOQUEAR Warranty Certicate Terms and Conditions LOGIC warrants that their Products will be free from defects in material and workmanship. The warranty period is one (1) year for the products and three (3) months for the accessories which are part of the original package including the battery. The warranty period begins the date of purchase by the End-User who shall present an invoice or a purchase receipt when requiring warranty service otherwise the warranty period will begin from the date of manufacture of the product. LOGIC will repair a product without cost to the customer if it presents a manufacturing defect or defect in workmanship during the warranty period and if the defect occurred under normal conditions of use in accordance with the instructions and specifications stated in the users manual. For additional information about the terms and conditions of LOGICs Limited Warranty or to obtain warranty service information, please visit the support section at: logicmobility.com Certificado do Garanta Trminos y Condiciones LOGIC garantiza que sus productos estarn libres de defectos de materia prima y ensamblaje. El perodo de garanta es de un (1) ao para los productos y de tres (3) meses para Ios accesorios que forman parte del paquete original incluyendo la batera. El usuario nal deber presentar una factura o un recibo de compra cuando exija el servicio de garanta, de lo contrario el perodo de garanta comenzar a partir de la fecha de fabricacin del producto. LOGIC reparar un producto, sin costo para el cliente si presenta un defecto de fabricacin o un defecto de ensamblaje durante el perodo de garanta y si el defecto se produjo en condiciones normales de uso de acuerdo con las instrucciones y especicaciones indicadas en el manual del usuario. Para ms detalles de la Garanta Limitada de LOGIC y para obtener informacin del servicio de garanta, por favor visite la seccin de soporte en nuestro sitio web: logicmobilitycom. logicmobility.com Made in China Copyright Swagtek, Inc. 2020 OPEN SIZE WITH BLEED: 100mm X 270mm CLOSE FINISHED SIZE: 67.5mm X 100mm TITLE PART NO. 0750-S5542T00-00 ORDER NO. CUSTOMER DESIGN Xieting DATE 2020.5.18 VENDOR Yukangda/Jiahui APPD CHECK DATE DATE MATERIAL 80g REMARKS NOTES 1. : 270x100mm(Tolerance): 1mm 2. 3. ROHSWEEE.
(Raw materials and the corresponding post processing should meet requirements defined in the ROHS and WEEE.) 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate FCC Statement the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is0.290W/Kgand when worn on the body, as described in this user guide, is0.787W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 1.528W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: O55551420 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved