THE FUNCTIONS IN DETAIL TIME ACTIVITY FAN CONNECT These functions are available in ACTIVITY mode:
Use quick taps to browse these functions/statistics. CURRENT ACTIVITY See how active you are at the very moment. 000 is no activity at all, 999 is maximum activity. The value is updated every 5 seconds. The average activity of every hour is logged and displayed with a graph on the app.
%TODAY Your daily goal is defined by an average activity over 24 hours. An average goal is set by default. Set your daily goal on the app. Check on your watch how many percent of your daily goal is reached so far. 00.0% means youve done nothing so far. 100% means youve completed your goal. The value is refreshed every minute. The current value is logged. KCAL Daily burnt calories STEPS Amount of daily steps done THE FUNCTIONS IN DETAIL Browse ACTIVITY*:
Swipe to access ACTIVITY mode. Quick tap to browse ACTIVITY statistics. TIME ACTIVITY FAN CONNECT CURRENT ACTIVITY. 1
%TODAY. 2 KCAL. 3 STEPS*. 4 Another quick tap brings you back to CURRENT ACTIVITY.
*No modifications can be done on these statistics, only information is provided.
*Step counter is always on. 1 2 3 4 Upper two digits stand for thousands lower three digits stand for hundreds browse browse browse Max. steps memorized per day: 65,000. Afterward the counter starts at 1 again. Data is stored for max. 31 days. Automatic resetting at 00.00 each night. Step counter calculations are based on average body measurements. Adjust your watch to your exact body data via the app on your smartphone to receive even more accurate results. 14 15 EnglishEnglish THE FUNCTIONS IN DETAIL TIME ACTIVITY FAN CONNECT THE FUNCTIONS IN DETAIL TIME ACTIVITY FAN CONNECT These functions/statistics are available in FAN mode:
Use quick taps to browse these functions/statistics. FAN RANK Information is sent to you from the app FAN HEAT The FAN HEAT displays your all over action from:
1. activity, 2. the number of claps, and 3. the number of La-Olas The value is only tracked and displayed when youve turned on the FAN HEAT. 000 is no action at all, 999 is maximum action. The value is refreshed every 5 seconds. The average fan-heat of every 5 minutes is logged and displayed with a graph on your app. 16 Turn FAN HEAT ON or OFF. Browse FAN RANK statistics. Swipe to access FAN mode. Swipe to access FAN mode. Quick tap to browse FAN functions. Go to HEAT. Quick tap to browse FAN functions. Go to RANK. Long press to turn 1 HEAT function ON or OFF*. See RANK statistics**. 2 1 2
* After 3 hours, FAN HEAT function switches automatically off. browse turn ON/OFF
** No modifications can be done on FAN RANK. Max. 10x 3 hours FAN HEAT sessions can be stored on the watch. Sessions beyond that will continuously overwrite the earliest sessions. Therefore make sure to regularly synchronize your watch (uploading data on the smartphone) to prevent any loss of data. RANK information can be updated via app on your smartphone only. Therefore make sure to regularly synchronize your watch (uploading data on the smartphone) in order to have the most accurate RANK. 17 EnglishEnglish THE FUNCTIONS IN DETAIL Start synchronizing:
Long press on the left section to turn Bluetooth function ON. TIME ACTIVITY FAN CONNECT Blinking Bluetooth icon indica-
1 tes BACKUP can now be started from the app. Rotating figure indicates data is 2 getting upladed. Figure stops rotating when data 3 transfer has been successfully completed. 1 2 3 THE FUNCTIONS IN DETAIL More fun with the app TIME ACTIVITY FAN CONNECT The Swatch Touch Zero Two watch is compatible with most iOS and AndroidTM devices running the latest software versions. app-
icon QR code turn ON Activate Bluetooth on your smart-
phone before turning Bluetooth ON on your watch. After both items have successfully been connected, choose SETTINGS / MY PROFILE in the app on your smartphone and select BACKUP to start the backup process. When synchronizing the data, keep the watch and smartphone as close as possible. Do not interupt. As long as Bluetooth is ON, no other watch function can be accessed. To avoid any loss of data, back up the data regularly. Download app on:
App Store Google PlayTM Supported Android devices have the following specifications:
Bluetooth-Version 4.0LE, Android 4.4 or higher Alternatively go to www.swatch.com and download the app directly from the website. Note: Software updates for your watch might be automatically installed via Blue-
tooth; the transfer can last up to 15 minutes. Do not interrupt the connection. Most iOS devices are supported. Swatch Touch Zero Two currently supports the following devices:
iPhone 4S or higher Your device needs to be running the latest iOS version. 18 19 EnglishEnglish ADDITIONAL INFORMATION Taking care and troubleshooting ADDITIONAL INFORMATION Taking care and troubleshooting Battery When the battery symbol 1 appears on the watch, your bat-
tery is low. Make sure the battery is replaced soon. Use correct battery type. 2 1 2 CR2032 20.00X3.20/3.00V If a screen with bars instead of Troubles shooting 1 figures appears, please remove battery and reinsert it after 30 sec-
onds to restart the watch. If the problem persists, please contact your nearest Swatch retailer. Cleaning Carefully rinse watch strap 2 with cold water only. Do not use any soap or detergents. 1 2 When the battery is almost depleted, the step counting and activity is no longer recorded, the FAN function is no longer accessible, and the Bluetooth connection cannot be activated. 20 When replacing the battery, be careful not to damage the (+) terminal, which is on the side. The () terminal is at the bottom. 21 EnglishEnglish ADDITIONAL INFORMATION How to restore Remove battery. Wait 30 seconds. Put battery back in again and wait for the following process to be completed:
Watch starts to beep for 2 second. System reloads, then beep stops. Display turns on for 5 second. 1 Restore to default user settings Wait another second. Then 1 touch all 3 touchscreen sections at the same time until display says test. Swipe to choose InIt 06. Start 2 process with quick tap. 3 data restoration. 4 long press (YES) to confirm the long press to re-start watch. long press on all three sections simultaneously 2 3 4 adjust start confirm re-start 22 23 EnglishEnglish REGULATORY COMPLIANCE INFORMATION REGULATORY COMPLIANCE INFORMATION R&TTE DoC from SUV2 26 Regulatory compliance information USA Federal Communications Commission Interference Statement FCC ID:2AD9FSUV2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment ge-
nerates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. RF exposure warning The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. Canada, Innovation, Science and Economic Development Canada (ISED) Notices IC: 1957A-SUV2 This device complies with ISED Canada license-ex-
empt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. This device complies with ISED Canada applicable to devices license-exempt RSS standard(s). Connect the equipment into an outlet on a circuit CAN ICES-3(B)/NMB-3(B) different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Canada, nnovation, Science and Economic Development Canada (ISED) Caution:
Any change or modifications not expressly approved by the grantee of this device could avoid the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme avec ISED Canada exemptes de licence RSS standard(s). Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterfrences et (2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils exempts de licence. Regulatory compliance information 27 Manufacturer:
SWATCH LTD. Jakob-Stmpflistzrasse 94 CH-2502 BIEL-BIENNE SWITZERLAND