FCC ID: H9PMC9062A GSM in Data Terminal with 3 Radios

instances of injury to persons or property. hereunder shall in no way exceed the purchase price of said Product or the fair market value of said service, except in Product or service. Sellers liability for damages to Buyer or others resulting from the use of any Product or service furnished limited to, special, indirect or consequential damages arising out of or in connection with the use or performance of the The stated express warranties are in lieu of all obligations or liabilities on the part of Seller for damages, including but not LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT APPLY. DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR COUNTRIES, FOR SUCH PRODUCTS, SOME EXCLUSIONS OR LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DURATION TO THE LIMITED WARRANTY PERIOD. SOME STATES OR COUNTRIES DO NOT ALLOW A LIMITATION ON HOW AND FITNESS FOR A PARTICULAR USE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED IN WARRANTIES ON PRODUCTS FURNISHED HEREUNDER INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY EXCEPT FOR THE WARRANTY OF TITLE AND THE EXPRESS WARRANTIES STATED ABOVE, SELLER DISCLAIMS ALL items, such as batteries, supplied with the Product. in the applicable Product specification; nor shall the above warranty provisions apply to any expendable or consumable accident, or forces or exposure beyond normal use within the specified operational and environmental parameters set forth maintenance instructions supplied by Seller; (iii) which has been subjected to unusual physical or electrical stress, abuse, or use of parts or accessories not approved or supplied by Symbol, or failure to perform operator handling and scheduled the Product result from normal wear and tear, misuse, negligence, improper storage, water or other liquids, battery leakage, tampered with, altered or modified, except by Sellers authorized service personnel; (ii) in which the defects or damage to

(F) Warranty Provisions The above warranty provisions shall not apply to any Product (i) which has been repaired, Product that had either been repaired or replaced by Seller. service as provided in Section C above, the aforementioned provisions do not extend the original warranty period of any

(E) Original Warranty Period Except for the warranty applying solely to the repaired component arising from a repair than the software, if any, installed by Seller during manufacture of the Product. programs, data or removable data storage media, or the restoration or reinstallation of any software programs or data other to Buyer for replacement parts for warranty repairs. Seller is not responsible for any damage to or loss of any software

(No Defect Found), or for product returned that Seller determines is not eligible for warranty repair. No charge will be made Customer shall be responsible for return shipment charges for product returned where Seller determines there is no defect assumes all costs and risks associated with this transportation; return shipment to the Customer will be at Seller's expense. on a return to service depot basis with prior Seller authorization. Customer is responsible for shipment to the Seller and Products. The sole obligation of Seller for defective hardware Products is limited to repair or replacement (at Sellers option) from returned products and that have been tested as meeting applicable specifications for equivalent new material and

(D) Product Service Products may be serviced or manufactured with parts, components, or subassemblies that originate Product, or until the end of the original warranty period, whichever is longer. materials on the repaired component of the Product for a period of thirty (30) days from the shipment date of the repaired including repairs covered by warranty, the repair services provided are warranted against defects in workmanship and

(C) Repair of Symbol-branded hardware For repairs on Symbol-branded hardware Products under this Agreement, shipment. Spare parts may be new or originate from returned units under the conditions set forth in subsection D below. of Products) are warranted against defects in workmanship and materials for a period of thirty (30) days from the date of

(B) Spare Parts Spare parts (i.e. parts, components, or subassemblies sold by Seller for use in the service and maintenance applicable Product specification in effect at the time of purchase or in the accompanying software license.

(Custom Products), remanufactured products, and reconditioned or upgraded products, shall be as provided in the durations on software, integrated installed systems, Product modified or designed to meet specific customer specifications provided the Product remains unmodified and is operated under normal and proper conditions. Warranty provisions and and materials for a period of twelve (12) months from the date of shipment, unless otherwise provided by Seller in writing,

(A) Warranty Symbol Technologies (hereafter Seller) hardware Products are warranted against defects in workmanship Warranty rev. 06/02 Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713 Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European D430,158; D430,159; D431,562; D436,104. D383,124; D391,250;D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035;

6,348,773; 6,380,949; 6,394,355; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478;

6,250,551; 6,295,031; 6,308,061; 6,308,892; 6,321,990; 6,328,213; 6,330,244; 6,336,587; 6,340,114; 6,340,115; 6,340,119;

6,178,426; 6,186,400; 6,188,681; 6,209,788; 6,209,789; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061;

6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428;

6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621; 6,084,528; 6,088,482; 6,092,725; 6,101,483;

5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894; 6,031,830; 6,036,098;

5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059;

5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,848,064;

5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500;

5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835;

5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679;

5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441;

5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812;

5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,324,924; 5,337,361;

5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628;

5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904;

4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183;

U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;4,758,717; 4,760,248; 4,806,742;

This product is covered by one or more of the following U.S. and foreign Patents:

Patents http://www.symbol.com Holtsville, N.Y. 11742-1300 One Symbol Plaza Symbol Technologies, Inc. respective companies and are hereby acknowledged. product names mentioned in this manual may be trademarks or registered trademarks of their Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other exists only for equipment, circuits, and subsystems contained in Symbol products. material, method, or process in which Symbol products might be used. An implied license patent right or patent, covering or relating to any combination, system, apparatus, machine, No license is granted, either expressly or by implication, estoppel, or otherwise under any application or use of any product, circuit, or application described herein. Symbol does not assume any product liability arising out of, or in connection with, the design. Symbol reserves the right to make changes to any product to improve reliability, function, or 2003 SYMBOL TECHNOLOGIES, INC. All rights reserved. END-USER LICENSE AGREEMENT You have acquired a device ("DEVICE") that includes software licensed by Symbol Technologies from Microsoft Licensing Inc. or its affiliates ("MS"). Those installed software products of MS origin, as well as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved. SOFTWARE includes software already installed on the DEVICE ("DEVICE Software") and MS software contained on the CD-ROM disk ("Companion CD"). IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ("EULA"), DO NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT SYMBOL TECHNOLOGIES FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT). GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:

DEVICE Software. You may use the DEVICE Software as installed on the DEVICE. COMPANION CD. A Companion CD is included with your DEVICE, and you may install and use the Microsoft ActiveSync 3.7 component on one (1) or more computers to exchange information with one (1) or more computing devices that contain a compatible version of the Microsoft Pocket PC Software 2002 operating system. For other software component(s) contained on the Companion CD, you may install and use such components only in accordance with the terms of the printed or online end user license agreement(s) provided with such component(s). In the absence of an end user license agreement for particular component(s) of the Companion CD, you may install and use only one

(1) copy of such component(s) on the DEVICE or a single computer with which you use the DEVICE. Microsoft Outlook 2002. If Microsoft Outlook 2002 is included with your DEVICE, the following terms apply to your use of Microsoft Outlook 2002: (i) regardless of the information contained in the

"Software Installation and Use" section of the online EULA you may install one (1) copy of Microsoft Outlook 2002 on one (1) computer to use, exchange data, share data, access and interact with the DEVICE, and (ii) the EULA for Microsoft Outlook 2002 is between Symbol Technologies and the end user - not between the PC manufacturer and end user. Security Updates/Digital Rights Management. Content providers are using the digital rights management technology contained in this SOFTWARE ("DRM") to protect the integrity of their content

("Secure Content") so that their intellectual property, including copyright, in such content is not misappropriated. Portions of this SOFTWARE and third party applications such as media players use DRM to play Secure Content ("DRM Software"). If the DRM SOFTWARE's security has been compromised, owners of Secure Content ("Secure Content Owners") may request that MS revoke the DRM SOFTWARE's right to copy, display and/or play Secure Content. Revocation does not alter the DRM SOFTWARE's ability to play unprotected content. A list of revoked DRM SOFTWARE is sent to your computer whenever you download a license for Secure Content from the Internet. You therefore agree that MS may, in conjunction with such license, also download revocation lists onto your computer on behalf of Secure Content Owners. MS will not retrieve any personally identifiable information, or any other information, from your computer by downloading such revocation lists. Secure Content Owners may also require you to upgrade some of the DRM components in this SOFTWARE ("DRM Upgrades") before accessing their content. When you attempt to play such content, MS DRM SOFTWARE will notify you that a DRM Upgrade is required and then ask for your consent before the DRM Upgrade is downloaded. Third party DRM Software may do the same. If you decline the upgrade, you will not be able to access content that requires the DRM Upgrade;

however, you will still be able to access unprotected content and Secure Content that does not require the upgrade. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS. Speech/Handwriting Recognition. If the SOFTWARE includes speech and/or handwriting recognition component(s), you should understand that speech and handwriting recognition are inherently statistical processes and that errors can occur in the component's recognition of your handwriting, and the final conversion into text. Neither Symbol Technologies nor its suppliers shall be liable for any damages arising out of errors in the speech and handwriting recognition process. Limitations on Reverse Engineering, Decompilation and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation. Single DEVICE. The DEVICE Software is licensed with the DEVICE as a single integrated product. The DEVICE Software installed in read only memory ("ROM") of the DEVICE may only be used as part of the DEVICE. Single EULA. The package for the DEVICE may contain multiple versions of this EULA, such as multiple translations and/or multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple versions of the EULA, you are licensed to use only one (1) copy of the DEVICE Software. NO RENTAL. Except if specifically authorized by Symbol Technologies for leased hardware, you may not rent, lease, or lend the SOFTWARE. APPROVED ADDITIONAL TEXT IF THE DEVICE IS LEASED:

LEASED HARDWARE. In the event that you receive the DEVICE under the terms of a lease from Symbol Technologies or Symbol Technologies' third-party representative, the following additional terms shall apply: (i) you may not transfer the SOFTWARE to another user as part of the transfer of the DEVICE, whether or not a permanent transfer of the SOFTWARE with the DEVICE is otherwise allowed in this EULA; (ii) your rights with respect to any SOFTWARE upgrades shall be as determined by the lease you signed for the DEVICE; and (iii) you may not use the SOFTWARE after your lease terminates, unless you purchase the DEVICE from Symbol Technologies. Software Transfer. You may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the DEVICE, provided you retain no copies, you transfer all of the SOFTWARE

(including all component parts, the media and printed materials, any upgrades, this EULA and, if applicable, the Certificate(s) of Authenticity), and the recipient agrees to the terms of this EULA. If the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE. Termination. Without prejudice to any other rights, Symbol Technologies or MS may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component parts. UPGRADES AND RECOVERY MEDIA. DEVICE Software. If the DEVICE Software is provided by Symbol Technologies separate from the DEVICE on media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is labeled "For Upgrade Purposes Only" you may install one (1) copy of such DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software, and use it in accordance with this EULA. COMPANION CD. If any software component(s) is provided by Symbol Technologies separate from the DEVICE on CD ROM disk(s) or via web download or other means, and labeled "For Upgrade Purposes Only", you may (i) install and use one (1) copy of such component(s) on the computer(s) you use to exchange data with the DEVICE as a replacement copy for the existing Companion CD component(s). Revision A November 2003 72-65261-02 http://www.symbol.com/manuals For the latest version of this guide go to:

+44 118 945 7360 Contact local distributor or call

+1-954-255-2610 Outside US 1-800-347-0178 Inside US Distributor Operations Europe/Mid-East Sales Support Latin America Outside Spain

+34 91 324 40 00 Inside Spain 91 324 40 00

+47 2232 4375 5-520-1835 6074-49020 9 5407 580 1-505-5794-0

+65-6796-9600 Spain/Espaa Norway/Norge Mexico/Mxico Germany/Deutchland Finland/Suomi Austria/sterreich Asia/Pacific 905-629-7226 Canada 84452900 Sweden/Sverige 11-8095311 315-271700 2-484441 01-40-96-52-21 7020-1718 1-800-672-906 0800 328 2424 1-631-738-2400 1-800-653-5350 South Africa Netherlands/Nederland Italy/Italia France Denmark/Danmark Australia United Kingdom United States contact the Symbol Support Center:

facilitys Technical or Systems Support. If there is a problem with the equipment, they will applications. If you have a problem running your unit or using your equipment, contact your Before using the unit, it must be configured to operate in the facilitys network and run your Service Information For Vehicle installations and use 1. 2. 3. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Position your device within easy reach. Be able to access your device without removing your eyes from the road. Do not take notes or use the device while driving. Jotting down a "to do" list or flipping through your address book takes attention away from your primary responsibility, driving safely. Phones/Terminals (placed to ear or used with headset) To comply with RF safety requirements use the specific belt clip. All other belt clips should be avoided and may not comply with RF safety requirements. The FCC has granted an Equipment Authorization for these model phones with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on these model phones is on file with the FCC and can be found under the Display Grant section of http://

www.fcc.gove/oet/fccid. Cell Phone/ Terminal Warnings Safety on the Road When driving a car, driving is your first responsibility. Check the laws and regulations on the use of wireless phones in the areas where you drive. Always obey them. When using your wireless device / phone behind the wheel of a car, practice good common sense and remember the following tips:

Give full attention to driving -- driving safely is your first responsibility;

Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 3. When available, use a hands free device. 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-

1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do for you. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number. 10. Connection to an alert device that will cause a vehicle horn to sound or lights to flash, on receipt of a call on public roads, is not permitted.

"The wireless industry reminds you to use your device / phone safely when driving". 11. 1. 2. 5. 6. 7. 8. 9. Licensing, Patent and Regulatory Information Windows Mobile 2003 Software for Pocket PCs MC9000-K/S COPYRIGHT. All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images, photographs, animations, video, audio, music, text and "applets,"

incorporated into the SOFTWARE), the accompanying printed materials, and any copies of the SOFTWARE, are owned by MS or its suppliers (including Microsoft Corporation). You may not copy the printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not specifically granted under this EULA are reserved by MS and its suppliers (including Microsoft Corporation). EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-

user, end-use and destination restrictions issued by U.S. and other governments. For additional information, see: http://www.microsoft.com/exporting/. PRODUCT SUPPORT. Product support for the SOFTWARE is not provided by MS, its parent corporation, Microsoft Corporation, or their affiliates or subsidiaries. For product support, please refer to Symbol Technologies support number provided in the documentation for the DEVICE. Should you have any questions concerning this EULA, or if you desire to contact Symbol Technologies for any other reason, please refer to the address provided in the documentation for the DEVICE. NO LIABILITY FOR CERTAIN DAMAGES. EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED WITH THE SOFTWARE PRINTED MATERIALS. Ergonomic Recommendations Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury. Reduce or eliminate repetitive motion Maintain a natural position Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Improve work procedures. FCC Exposure Guidelines Safety Information The device complies with Internationally recognized standards covering Specific Absorption Rate (SAR) related to human exposure to electromagnetic fields from radio devices. Reducing RF Influence - Use Properly It is advisable to use the device only in the normal operating position and it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Handheld Devices This device was tested for typical body-worn operation. A minimum separation distance of 1 cm must be maintained between this device and the body. The use of third-party belt-clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of these accessories that do not satisfy these requirements may not comply with FCC RF exposure compliance requirements, and should be avoided. Laser Devices Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-1:1993, EN60825-

1:1994+A11:1996. The laser classification is marked on one of the labels on the device. Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:

Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. Effect on Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Effect on Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Safety on Aircraft You are required to switch OFF mobile phones when on board an aircraft as operation may be dangerous and illegal. Pacemakers It is recommended by pacemaker manufacturers that a minimum of 15cm (6 inches) be maintained between a handheld wireless phone and a pacemaker to avoid any possible interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers:

Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker Should not carry the device in a breast pocket Should use the ear furthest from the pacemaker to minimise the potential for when turned ON interference. If you have any reason to suspect that interference is taking place, turn OFF your device Hearing Aids The device may interfere with some hearing aids. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. Other Medical Devices The device transmits radio frequency energy and has the potential to interfere with inadequately protected medical devices. Consult your physician or the manufacturer of the device to see if the particular device has sufficient protection. It is good practice to turn OFF the device within a hospital or other medical facility where sensitive medical equipment is in use. In some countries, this is a legal requirement applying to all mobile phones and related equipment. Warning Notices Please observe all warning notices with regard to the usage of mobile phones. Scanner Labeling Potentially Hazardous Atmospheres You are advised not to use this device at a refuelling point. You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Regulatory Information All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the user's authority to operate the equipment. Radio Modules This device contains approved radio modules. These modules are identified below:

Symbol RLAN (11Mbps DSSS) radio module, Type: 21-64436 Siemens GSM GPRS MC45 module, or Sierra Wireless EM3420 module Symbol Bluetooth Module, Type: 21-64381. This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. This device contains the following Bluetooth qualified subsystems:

BTID: B01285 BTID: B00813 Power Supply Use only a Symbol-approved power supply output rated 11-16 Vdc and minimum 2A. The power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous. Benutzen Sie nur eine Symbol Technologies genehmigt in den Ausgabe: 11-16Vdc und minimum 2A. Die Stromversorgung ist bescheinigt nach EN60950 mit SELV Ausgaben. Laser Labels In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:

CE Marking and European Economic Area (EEA) RLAN's (2.4GHz) for use through the EEA have the following restrictions:

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 France, equipment is restricted to 2.4465 -2.4835 GHz frequency range Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range Italy requires a user license for outside usage. Bluetooth for use through the EEA have the following restrictions:

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz GHz Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range Italy requires a user license for outside usage. Statement of Compliance Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/

EEC. Declaration of Conformities may be obtained from: http://www2.symbol.com/doc/

Other Countries

- Restrict Frequency Range to: 2.450 - 2.4835 GHz. Mexico Israel

- Restrict Frequency Range to: 2.418 - 2.457 GHz. Sri Lanka - Restrict Frequency Range to: 2.400 - 2.430 GHz. Battery Information Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries discharged in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, they should be charged and discharged at least once a year. If an electrolyte leakage is observed, avoid any contact with affected area and properly dispose of the battery. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Symbol batteries is 30 days, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Symbol batteries, please visit: http://mysymbolcare.symbol.com/battery/batbasics1.html. ENGLISH CLASS 1 CLASS 2 CLASS 1 LASER PRODUCT LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT DANISH / DANSK KLASSE 1 KLASSE 2 KLASSE 1 LASERPRODUKT LASERLYF SE IKKE IND I STRLEN KLASSE 2 LASERPRODUKT DUTCH / NEDERLANDS KLASSE 1 KLASSE 2 KLASSE-1 LASERPRODUKT LASERLICHT NIET IN STRAAL STAREN KLASSE-2 LASERPRODUKT FINNISH / SUOMI LUOKKA 1 LUOKKA 2 LUOKKA 1 LASERTUOTE LASERVALO L TUIJOTA SDETT LUOKKA 2 LASERTUOTE HEBREW ITALIAN / ITALIANO CLASSE 1 CLASSE 2 PRODOTTO AL LASER DI CLASSE 1 LUCE LASER NON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 NORWEGIAN / NORSK KLASSE 1 KLASSE 2 LASERPRODUKT, KLASSE 1 LASERLYS IKKE STIRR INN I LYSSTRLEN LASERPRODUKT, KLASSE 2 PORTUGUESE / PORTUGUS CLASSE 1 CLASSE 2 PRODUTO LASER DA CLASSE 1 LUZ DE LASER NO FIXAR O RAIO LUMINOSO PRODUTO LASER DA CLASSE 2 FRENCH / FRANAIS CLASSE 1 CLASSE 2 PRODUIT LASER DE CLASSE 1 LUMIERE LASER NE PAS REGARDER LE RAYON FIXEMENT PRODUIT LASER DE CLASSE 2 SPANISH / ESPAOL CLASE 1 CLASE 2 PRODUCTO LASER DE LA CLASE 1 LUZ LASER NO MIRE FIJAMENTE EL HAZ PRODUCTO LASER DE LA CLASE 2 GERMAN / DEUTCH KLASSE 1 KLASSE 2 LASERPRODUKT DER KLASSE 1 LASERSTRAHLEN NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN LASERPRODUKT DER KLASSE 2 SWEDISH / SVENSKA KLASS 1 KLASS 2 LASERPRODUKT KLASS 1 LASERLJUS STIRRA INTE MOT STRLEN LASERPRODUKT KLASS 2 Radio Frequency Interference Requirements Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. LASERLICHT - NICHT IN DEN STRAHL BLICKEN. LASER KLASSE 2 LUMIRE LASER -NE PAS REGARDER DANS LE FAISCEAU APPAREIL LASER DE CLASSE 2. CAUTION-LASER LIGHT. DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT 630-680 nM, 1 mW Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term IC: before the radio certification only signifies that Industry Canada technical specifications were met.

instances of injury to persons or property. hereunder shall in no way exceed the purchase price of said Product or the fair market value of said service, except in Product or service. Sellers liability for damages to Buyer or others resulting from the use of any Product or service furnished limited to, special, indirect or consequential damages arising out of or in connection with the use or performance of the The stated express warranties are in lieu of all obligations or liabilities on the part of Seller for damages, including but not LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT APPLY. DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR COUNTRIES, FOR SUCH PRODUCTS, SOME EXCLUSIONS OR LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DURATION TO THE LIMITED WARRANTY PERIOD. SOME STATES OR COUNTRIES DO NOT ALLOW A LIMITATION ON HOW AND FITNESS FOR A PARTICULAR USE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED IN WARRANTIES ON PRODUCTS FURNISHED HEREUNDER INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY EXCEPT FOR THE WARRANTY OF TITLE AND THE EXPRESS WARRANTIES STATED ABOVE, SELLER DISCLAIMS ALL items, such as batteries, supplied with the Product. in the applicable Product specification; nor shall the above warranty provisions apply to any expendable or consumable accident, or forces or exposure beyond normal use within the specified operational and environmental parameters set forth maintenance instructions supplied by Seller; (iii) which has been subjected to unusual physical or electrical stress, abuse, or use of parts or accessories not approved or supplied by Symbol, or failure to perform operator handling and scheduled the Product result from normal wear and tear, misuse, negligence, improper storage, water or other liquids, battery leakage, tampered with, altered or modified, except by Sellers authorized service personnel; (ii) in which the defects or damage to

(F) Warranty Provisions The above warranty provisions shall not apply to any Product (i) which has been repaired, Product that had either been repaired or replaced by Seller. service as provided in Section C above, the aforementioned provisions do not extend the original warranty period of any

(E) Original Warranty Period Except for the warranty applying solely to the repaired component arising from a repair than the software, if any, installed by Seller during manufacture of the Product. programs, data or removable data storage media, or the restoration or reinstallation of any software programs or data other to Buyer for replacement parts for warranty repairs. Seller is not responsible for any damage to or loss of any software

(No Defect Found), or for product returned that Seller determines is not eligible for warranty repair. No charge will be made Customer shall be responsible for return shipment charges for product returned where Seller determines there is no defect assumes all costs and risks associated with this transportation; return shipment to the Customer will be at Seller's expense. on a return to service depot basis with prior Seller authorization. Customer is responsible for shipment to the Seller and Products. The sole obligation of Seller for defective hardware Products is limited to repair or replacement (at Sellers option) from returned products and that have been tested as meeting applicable specifications for equivalent new material and

(D) Product Service Products may be serviced or manufactured with parts, components, or subassemblies that originate Product, or until the end of the original warranty period, whichever is longer. materials on the repaired component of the Product for a period of thirty (30) days from the shipment date of the repaired including repairs covered by warranty, the repair services provided are warranted against defects in workmanship and

(C) Repair of Symbol-branded hardware For repairs on Symbol-branded hardware Products under this Agreement, shipment. Spare parts may be new or originate from returned units under the conditions set forth in subsection D below. of Products) are warranted against defects in workmanship and materials for a period of thirty (30) days from the date of

(B) Spare Parts Spare parts (i.e. parts, components, or subassemblies sold by Seller for use in the service and maintenance applicable Product specification in effect at the time of purchase or in the accompanying software license.

(Custom Products), remanufactured products, and reconditioned or upgraded products, shall be as provided in the durations on software, integrated installed systems, Product modified or designed to meet specific customer specifications provided the Product remains unmodified and is operated under normal and proper conditions. Warranty provisions and and materials for a period of twelve (12) months from the date of shipment, unless otherwise provided by Seller in writing,

(A) Warranty Symbol Technologies (hereafter Seller) hardware Products are warranted against defects in workmanship Warranty rev. 06/02 Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713 Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European D430,158; D430,159; D431,562; D436,104. D383,124; D391,250;D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035;

6,348,773; 6,380,949; 6,394,355; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478;

6,250,551; 6,295,031; 6,308,061; 6,308,892; 6,321,990; 6,328,213; 6,330,244; 6,336,587; 6,340,114; 6,340,115; 6,340,119;

6,178,426; 6,186,400; 6,188,681; 6,209,788; 6,209,789; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061;

6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428;

6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621; 6,084,528; 6,088,482; 6,092,725; 6,101,483;

5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894; 6,031,830; 6,036,098;

5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059;

5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,848,064;

5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500;

5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835;

5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679;

5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441;

5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812;

5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,324,924; 5,337,361;

5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628;

5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904;

4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183;

U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;4,758,717; 4,760,248; 4,806,742;

This product is covered by one or more of the following U.S. and foreign Patents:

Patents http://www.symbol.com Holtsville, N.Y. 11742-1300 One Symbol Plaza Symbol Technologies, Inc. respective companies and are hereby acknowledged. product names mentioned in this manual may be trademarks or registered trademarks of their Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other exists only for equipment, circuits, and subsystems contained in Symbol products. material, method, or process in which Symbol products might be used. An implied license patent right or patent, covering or relating to any combination, system, apparatus, machine, No license is granted, either expressly or by implication, estoppel, or otherwise under any application or use of any product, circuit, or application described herein. Symbol does not assume any product liability arising out of, or in connection with, the design. Symbol reserves the right to make changes to any product to improve reliability, function, or 2003 SYMBOL TECHNOLOGIES, INC. All rights reserved. END-USER LICENSE AGREEMENT

You have acquired a device ("DEVICE") that includes software licensed by Symbol Technologies from Microsoft Licensing Inc. or its affiliates ("MS"). Those installed software products of MS origin, as well as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved. SOFTWARE includes software already installed on the DEVICE ("DEVICE Software") and MS software contained on the CD-ROM disk ("Companion CD").

IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ("EULA"), DO NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT SYMBOL TECHNOLOGIES FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT). GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:

DEVICE Software. You may use the DEVICE Software as installed on the DEVICE.

COMPANION CD. A Companion CD is included with your DEVICE, and you may install and use the Microsoft ActiveSync 3.7 component on one (1) or more computers to exchange information with one (1) or more computing devices that contain a compatible version of the Microsoft Pocket PC Software 2002 operating system. For other software component(s) contained on the Companion CD, you may install and use such components only in accordance with the terms of the printed or online end user license agreement(s) provided with such component(s). In the absence of an end user license agreement for particular component(s) of the Companion CD, you may install and use only one

(1) copy of such component(s) on the DEVICE or a single computer with which you use the DEVICE.

Microsoft Outlook 2002. If Microsoft Outlook 2002 is included with your DEVICE, the following terms apply to your use of Microsoft Outlook 2002: (i) regardless of the information contained in the

"Software Installation and Use" section of the online EULA you may install one (1) copy of Microsoft Outlook 2002 on one (1) computer to use, exchange data, share data, access and interact with the DEVICE, and (ii) the EULA for Microsoft Outlook 2002 is between Symbol Technologies and the end user - not between the PC manufacturer and end user.

Security Updates/Digital Rights Management. Content providers are using the digital rights management technology contained in this SOFTWARE ("DRM") to protect the integrity of their content

("Secure Content") so that their intellectual property, including copyright, in such content is not misappropriated. Portions of this SOFTWARE and third party applications such as media players use DRM to play Secure Content ("DRM Software"). If the DRM SOFTWARE's security has been compromised, owners of Secure Content ("Secure Content Owners") may request that MS revoke the DRM SOFTWARE's right to copy, display and/or play Secure Content. Revocation does not alter the DRM SOFTWARE's ability to play unprotected content. A list of revoked DRM SOFTWARE is sent to your computer whenever you download a license for Secure Content from the Internet. You therefore agree that MS may, in conjunction with such license, also download revocation lists onto your computer on behalf of Secure Content Owners. MS will not retrieve any personally identifiable information, or any other information, from your computer by downloading such revocation lists. Secure Content Owners may also require you to upgrade some of the DRM components in this SOFTWARE ("DRM Upgrades") before accessing their content. When you attempt to play such content, MS DRM SOFTWARE will notify you that a DRM Upgrade is required and then ask for your consent before the DRM Upgrade is downloaded. Third party DRM Software may do the same. If you decline the upgrade, you will not be able to access content that requires the DRM Upgrade;

however, you will still be able to access unprotected content and Secure Content that does not require the upgrade. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.

Speech/Handwriting Recognition. If the SOFTWARE includes speech and/or handwriting recognition component(s), you should understand that speech and handwriting recognition are inherently statistical processes and that errors can occur in the component's recognition of your handwriting, and the final conversion into text. Neither Symbol Technologies nor its suppliers shall be liable for any damages arising out of errors in the speech and handwriting recognition process.

Limitations on Reverse Engineering, Decompilation and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.

Single DEVICE. The DEVICE Software is licensed with the DEVICE as a single integrated product. The DEVICE Software installed in read only memory ("ROM") of the DEVICE may only be used as part of the DEVICE.

Single EULA. The package for the DEVICE may contain multiple versions of this EULA, such as multiple translations and/or multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple versions of the EULA, you are licensed to use only one (1) copy of the DEVICE Software.

NO RENTAL. Except if specifically authorized by Symbol Technologies for leased hardware, you may not rent, lease, or lend the SOFTWARE. APPROVED ADDITIONAL TEXT IF THE DEVICE IS LEASED:

LEASED HARDWARE. In the event that you receive the DEVICE under the terms of a lease from Symbol Technologies or Symbol Technologies' third-party representative, the following additional terms shall apply: (i) you may not transfer the SOFTWARE to another user as part of the transfer of the DEVICE, whether or not a permanent transfer of the SOFTWARE with the DEVICE is otherwise allowed in this EULA; (ii) your rights with respect to any SOFTWARE upgrades shall be as determined by the lease you signed for the DEVICE; and (iii) you may not use the SOFTWARE after your lease terminates, unless you purchase the DEVICE from Symbol Technologies.

Software Transfer. You may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the DEVICE, provided you retain no copies, you transfer all of the SOFTWARE

(including all component parts, the media and printed materials, any upgrades, this EULA and, if applicable, the Certificate(s) of Authenticity), and the recipient agrees to the terms of this EULA. If the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE.

Termination. Without prejudice to any other rights, Symbol Technologies or MS may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component parts. UPGRADES AND RECOVERY MEDIA.

DEVICE Software. If the DEVICE Software is provided by Symbol Technologies separate from the DEVICE on media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is labeled "For Upgrade Purposes Only" you may install one (1) copy of such DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software, and use it in accordance with this EULA.

COMPANION CD. If any software component(s) is provided by Symbol Technologies separate from the DEVICE on CD ROM disk(s) or via web download or other means, and labeled "For Upgrade Purposes Only", you may (i) install and use one (1) copy of such component(s) on the computer(s) you use to exchange data with the DEVICE as a replacement copy for the existing Companion CD component(s). Revision 1 July 2004 72-65261-04 http://www.symbol.com/manuals For the latest version of this guide go to:

+44 118 945 7360 Contact local distributor or call

+1-954-255-2610 Outside US 1-800-347-0178 Inside US Distributor Operations Europe/Mid-East Sales Support Latin America Outside Spain

+34 91 324 40 00 Inside Spain 91 324 40 00

+47 2232 4375 5-520-1835 6074-49020 9 5407 580 1-505-5794-0

+65-6796-9600 Spain/Espaa Norway/Norge Mexico/Mxico Germany/Deutschland Finland/Suomi Austria/sterreich Asia/Pacific 905-629-7226 Canada 84452900 Sweden/Sverige 11-8095311 315-271700 2-484441 01-40-96-52-21 7020-1718 1-800-672-906 0800 328 2424 1-631-738-2400 1-800-653-5350 South Africa Netherlands/Nederland Italy/Italia France Denmark/Danmark Australia United Kingdom United States contact the Symbol Support Center:

facilitys Technical or Systems Support. If there is a problem with the equipment, they will applications. If you have a problem running your unit or using your equipment, contact your Before using the unit, it must be configured to operate in the facilitys network and run your Service Information For Vehicle installations and use 1. 2. 3. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Position your device within easy reach. Be able to access your device without removing your eyes from the road. Do not take notes or use the device while driving. Jotting down a "to do" list or flipping through your address book takes attention away from your primary responsibility, driving safely. Phones/Terminals (placed to ear or used with headset) To comply with RF safety requirements use the specific belt clip. All other belt clips should be avoided and may not comply with RF safety requirements. The FCC has granted an Equipment Authorization for these model phones with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on these model phones is on file with the FCC and can be found under the Display Grant section of http://

www.fcc.gove/oet/fccid. Cell Phone/ Terminal Warnings Safety on the Road When driving a car, driving is your first responsibility. Check the laws and regulations on the use of wireless phones in the areas where you drive. Always obey them. When using your wireless device / phone behind the wheel of a car, practice good common sense and remember the following tips:

Give full attention to driving -- driving safely is your first responsibility;

Get to know your wireless device and any features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 3. When available, use a hands free device. 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2 in Europe) or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless of any security codes and depending on a network, with or without a SIM card inserted. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-

1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do for you. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number. 10. Connection to an alert device that will cause a vehicle horn to sound or lights to flash, on receipt of a call on public roads, is not permitted.

"The wireless industry reminds you to use your device / phone safely when driving". 11. 1. 2. 5. 6. 7. 8. 9. Licensing, Patent and Regulatory Information Windows Mobile 2003 Software for Pocket PCs MC9000-K/S COPYRIGHT. All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images, photographs, animations, video, audio, music, text and "applets,"

incorporated into the SOFTWARE), the accompanying printed materials, and any copies of the SOFTWARE, are owned by MS or its suppliers (including Microsoft Corporation). You may not copy the printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not specifically granted under this EULA are reserved by MS and its suppliers (including Microsoft Corporation). EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-

user, end-use and destination restrictions issued by U.S. and other governments. For additional information, see: http://www.microsoft.com/exporting/. PRODUCT SUPPORT. Product support for the SOFTWARE is not provided by MS, its parent corporation, Microsoft Corporation, or their affiliates or subsidiaries. For product support, please refer to Symbol Technologies support number provided in the documentation for the DEVICE. Should you have any questions concerning this EULA, or if you desire to contact Symbol Technologies for any other reason, please refer to the address provided in the documentation for the DEVICE. NO LIABILITY FOR CERTAIN DAMAGES. EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED WITH THE SOFTWARE PRINTED MATERIALS. Ergonomic Recommendations Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury.

Reduce or eliminate repetitive motion

Maintain a natural position

Reduce or eliminate excessive force

Keep objects that are used frequently within easy reach

Perform tasks at correct heights

Reduce or eliminate vibration

Reduce or eliminate direct pressure

Provide adjustable workstations

Provide adequate clearance

Provide a suitable working environment

Improve work procedures. FCC Exposure Guidelines Safety Information The device complies with Internationally recognized standards covering Specific Absorption Rate (SAR) related to human exposure to electromagnetic fields from radio devices. Reducing RF Influence - Use Properly It is advisable to use the device only in the normal operating position and it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Handheld Devices This device was tested for typical body-worn operations with the holster providing a minimal spacing of 4.0 cm from the body to the terminal/antenna. The holster is designed to hold the terminal with the screen facing the body. The holster should be worn on the hip. Use of the terminal/holster in any other position may not comply with FCC RF Exposure requirements and should be avoided. The use of other belt-clip/holsters and other non-tested accessories may not comply with FCC RF Exposure requirements and should be avoided. Laser Devices Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-1:1993, EN60825-

1:1994+A11:1996. The laser classification is marked on one of the labels on the device. Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:

Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful. Effect on Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Effect on Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Safety on Aircraft You are required to switch OFF mobile phones when on board an aircraft as operation may be dangerous and illegal. Pacemakers It is recommended by pacemaker manufacturers that a minimum of 15cm (6 inches) be maintained between a handheld wireless phone and a pacemaker to avoid any possible interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research. Persons with Pacemakers:

Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker

Should not carry the device in a breast pocket

Should use the ear furthest from the pacemaker to minimise the potential for when turned ON interference. If you have any reason to suspect that interference is taking place, turn OFF your device Hearing Aids The device may interfere with some hearing aids. In the event of interference you may want to consult your hearing aid supplier to discuss solutions. Other Medical Devices The device transmits radio frequency energy and has the potential to interfere with inadequately protected medical devices. Consult your physician or the manufacturer of the device to see if the particular device has sufficient protection. It is good practice to turn OFF the device within a hospital or other medical facility where sensitive medical equipment is in use. In some countries, this is a legal requirement applying to all mobile phones and related equipment.. Warning Notices Please observe all warning notices with regard to the usage of mobile phones. Scanner Labeling Potentially Hazardous Atmospheres You are advised not to use this device at a refuelling point. You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine. Regulatory Information All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required. Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the user's authority to operate the equipment. Radio Modules This device can contain the following approved radio modules. These modules are identified below:

Symbol RLAN (11Mbps DSSS) radio module, Type: 21-64436*

Symbol RLAN (2Mbps FM) radio module, Type: LA3021

Siemens GSM GPRS MC45 or MC46 module, or Sierra Wireless EM3420 module

Symbol Bluetooth Module, Type: 21-64381*.

*This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use. This device can contain the following Bluetooth qualified subsystems:

BTID: B01285

BTID: B00813 Power Supply Use only a Symbol-approved power supply output rated 11-16 Vdc and minimum 2A. The power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous. Benutzen Sie nur eine Symbol Technologies genehmigt in den Ausgabe: 11-16Vdc und minimum 2A. Die Stromversorgung ist bescheinigt nach EN60950 mit SELV Ausgaben. Laser Labels In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:

CE Marking and European Economic Area (EEA) RLAN's (2.4GHz) for use through the EEA have the following restrictions:

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835

France, equipment is restricted to 2.4465 -2.4835 GHz frequency range

Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range

Italy requires a user license for outside usage. Bluetooth for use through the EEA have the following restrictions:

Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz GHz

Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range

Italy requires a user license for outside usage. Statement of Compliance Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/

EEC. Declaration of Conformities may be obtained from: http://www2.symbol.com/doc/

Other Countries

- Restrict Frequency Range to: 2.450 - 2.4835 GHz. Mexico Israel

- Restrict Frequency Range to: 2.418 - 2.457 GHz. Sri Lanka - Restrict Frequency Range to: 2.400 - 2.430 GHz. Battery Information Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store batteries discharged in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, they should be charged and discharged at least once a year. If an electrolyte leakage is observed, avoid any contact with affected area and properly dispose of the battery. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Symbol batteries is 30 days, regardless if the battery was purchased separately or included as part of the mobile computer or bar code scanner. For more information on Symbol batteries, please visit: http://mysymbolcare.symbol.com/battery/batbasics1.html. ENGLISH CLASS 1 CLASS 2 CLASS 1 LASER PRODUCT LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT DANISH / DANSK KLASSE 1 KLASSE 2 KLASSE 1 LASERPRODUKT LASERLYF SE IKKE IND I STRLEN KLASSE 2 LASERPRODUKT DUTCH / NEDERLANDS KLASSE 1 KLASSE 2 KLASSE-1 LASERPRODUKT LASERLICHT NIET IN STRAAL STAREN KLASSE-2 LASERPRODUKT FINNISH / SUOMI LUOKKA 1 LUOKKA 2 LUOKKA 1 LASERTUOTE LASERVALO L TUIJOTA SDETT LUOKKA 2 LASERTUOTE HEBREW ITALIAN / ITALIANO CLASSE 1 CLASSE 2 PRODOTTO AL LASER DI CLASSE 1 LUCE LASER NON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 NORWEGIAN / NORSK KLASSE 1 KLASSE 2 LASERPRODUKT, KLASSE 1 LASERLYS IKKE STIRR INN I LYSSTRLEN LASERPRODUKT, KLASSE 2 PORTUGUESE / PORTUGUS CLASSE 1 CLASSE 2 PRODUTO LASER DA CLASSE 1 LUZ DE LASER NO FIXAR O RAIO LUMINOSO PRODUTO LASER DA CLASSE 2 FRENCH / FRANAIS CLASSE 1 CLASSE 2 PRODUIT LASER DE CLASSE 1 LUMIERE LASER NE PAS REGARDER LE RAYON FIXEMENT PRODUIT LASER DE CLASSE 2 SPANISH / ESPAOL CLASE 1 CLASE 2 PRODUCTO LASER DE LA CLASE 1 LUZ LASER NO MIRE FIJAMENTE EL HAZ PRODUCTO LASER DE LA CLASE 2 GERMAN / DEUTCH KLASSE 1 KLASSE 2 LASERPRODUKT DER KLASSE 1 LASERSTRAHLEN NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN LASERPRODUKT DER KLASSE 2 SWEDISH / SVENSKA KLASS 1 KLASS 2 LASERPRODUKT KLASS 1 LASERLJUS STIRRA INTE MOT STRLEN LASERPRODUKT KLASS 2 Radio Frequency Interference Requirements Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help. LASERLICHT - NICHT IN DEN STRAHL BLICKEN. LASER KLASSE 2 LUMIRE LASER -NE PAS REGARDER DANS LE FAISCEAU APPAREIL LASER DE CLASSE 2. CAUTION-LASER LIGHT. DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT 630-680 nM, 1 mW Radio Transmitters (Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Interference Requirements - Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term IC: before the radio certification only signifies that Industry Canada technical specifications were met.