|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2004-03-01
|
|
1 2 3 4
|
2004-02-27
|
|
1 2 3 4
|
2004-01-23
|
|
1 2 3 4
|
2003-11-26
|
|
1 2 3 4
|
Applicant's complete, legal business name |
Symbol Technologies Inc
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0011209004
|
|
1 2 3 4
|
Physical Address |
1 Zebra Plaza
|
|
1 2 3 4
|
Holtsville, New York 11742
|
|
1 2 3 4
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
h******@babt.com
|
|
1 2 3 4
|
T******@babt.com
|
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
H9P
|
|
1 2 3 4
|
Equipment Product Code |
2164436
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
L****** Z********
|
|
1 2 3 4
|
Title |
Regulatory Specialist
|
|
1 2 3 4
|
Telephone Number |
346-2********
|
|
1 2 3 4
|
Fax Number |
631-6********
|
|
1 2 3 4
|
E-mail |
L******@zebra.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WLAN Module |
| 1 2 3 4 | WLAN module |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 | Original Equipment |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | This is a Modular Approval. The maximum conducted power output is listed above. The only antennas approved for use with this module are those documented in the filing. This Modular Approval is limited to OEM installation only and the OEM integrators must be provided with, and must follow, the Grantees antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091.
The module is approved for use in the Grantees MC9060 short, Brick, and Gun hosts. The maximum measured SAR level in the MC9060 Gun host is 1.41 W/kg. The maximum measured SAR level in the MC9060 brick host is 1.16 W/kg. The maximum measured SAR level in the MC9060 short host is 0.751 W/kg. To maintain SAR compliance for body-worn operating configurations only non-metallic belt clips / holsters which maintain a minimum distance of 1 cm between the device and body are permitted. The device is not approved for use with headsets except as documented in this filing. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
The module must not be co-located or operated in conjunction with any other antenna or transmitter. This grant is valid only when the device is sold to OEM integrators and the OEM integrators must be instructed to ensure that the end users shall have no information on how to remove the device from its host equipment nor on how to use or install the device in another host. |
| 1 2 3 4 | This is a Modular Approval. The maximum conducted power output is listed above. The only antennas approved for use with this module are those documented in the filing. This Modular Approval is limited to OEM installation only and the OEM integrators must be provided with, and must follow, the Grantees antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091.
The module is approved for use in the Grantees MC9060 short and Brick hosts. The maximum measured SAR level in the MC9060 brick host is 1.16 W/kg. The maximum measured SAR level in the MC9060 short host is 0.751 W/kg. To maintain SAR compliance for body-worn operating configurations only non-metallic belt clips / holsters which maintain a minimum distance of 1 cm between the device and body are permitted. The device is not approved for use with headsets except as documented in this filing. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
The module must not be co-located or operated in conjunction with any other antenna or transmitter. This grant is valid only when the device is sold to OEM integrators and the OEM integrators must be instructed to ensure that the end users shall have no information on how to remove the device from its host equipment nor on how to use or install the device in another host |
| 1 2 3 4 | This is a Modular Approval. The maximum conducted power output is listed above. The only antennas approved for use with this module are those documented in the filing. This Modular Approval is limited to OEM installation only and the OEM integrators must be provided with, and must follow, the Grantees antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091.The module is approved for use in the Grantees MC9060 short host. The maximum measured SAR level in the MC9060 short host is 0.751 W/kg. To maintain SAR compliance for body-worn operating configurations only non-metallic belt clips / holsters which maintain a minimum distance of 1 cm between the device and body are permitted. The device is not approved for use with headsets except as documented in this filing. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The module must not be co-located or operated in conjunction with any other antenna or transmitter. This grant is valid only when the device is sold to OEM integrators and the OEM integrators must be instructed to ensure that the end users shall have no information on how to remove the device from its host equipment nor on how to use or install the device in another host. |
| 1 2 3 4 | Modular Approval. Power Output listed is conducted. The only antennas approved for use with this module are those documented in the file. Approval is limited to OEM installation only.
The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091 and must not be co-located or operated in conjunction with any other antenna or transmitter not described in this application. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
TUV SUD Product Service
|
|
1 2 3 4
|
Name |
J****** A********
|
|
1 2 3 4
|
Telephone Number |
44-14********
|
|
1 2 3 4
|
Fax Number |
44-11********
|
|
1 2 3 4
|
E-mail |
j******@tuv-sud.co.uk
|
|