DataData Sheet Sheet Module nameIA9QH5 SY5-A24 Module Project CodeSMMSBRQHC58RH2 Product name:RF 5G Wireless Module (FPC type) Version 0.1 Aug. 22, 2018 Syncomm Technology Corp. 10F., No. 101, Sec. 2, Gongdao 5th Rd., East Dist., Hsinchu City, Taiwan, R.O.C. Tel: +886-3-5169188 Fax: +886-3-5169111 http://www.syncomm.com.tw SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw INDEX Features................................................................................................................................................... 3 1. Application...............................................................................................................................................3 2. RF Specification........................................................................................................................................4 3. Audio Specification................................................................................................ 4. Electrical Specification.............................................................................................................................5 5. 6. Mechanical Specification.........................................................................................................................6 Block Diagram........................................................................................................ 7. Interface...................................................................................................................................................7 8. Design Reference................................................................................................... 9. 10. Antenna Application.............................................................................................. 11. Ordering Information............................................................................................. 12. Revision History..................................................................................................... This document is proprietary and confidential to Syncomm Technology Corp. SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw SYNIC and Intelligent Wireless are trademarks of Syncomm Technology Corp. All other trademarks and registered trademarks are the property of their respective owners. SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9QH5 SY5-A24 MODULE V0.1 page - 4 -
1. Features 5.2GHz/5.8GHz ISM Band GFSK modulation Low BOM cost Long distance > 30m (Line of sight) Support 1-1 duplex mode or 1-N broadcasting mode Digital I2S audio interface Support no audio detection function Support compression/un-compression mode Short delay time variation Antenna diversity Audio format 16/24bit , 32/44.1/48K/96KHz sampling rate Robust Packet error correction No RF induced audio noise Audio latency time < 20ms Low power consumption
(Programmable according customized spec.) 2. Application Wireless HTiB Rear Speaker Wireless Outdoor Speaker Wireless TV theater Wireless Audio Sender Wireless Headphone Wireless Stereo Ear Microphone SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw 3. RF Specification IA9QH5 SY5-A24 MODULE V0.1 page - 5 -
Item Channel Range
-20dB bandwidth RF Output Power Sensitivity Item Channel Range
-20dB bandwidth RF Output Power Sensitivity Min 5160 Min 5735 Typ 2.7 11
-91 Max Unit 5240 MHz MHz dBm dBm Note 2M Mode Peak power at Antenna port The smaller, the better Table 1 5.2GHz RF Specification Typ 3 11
-89 Max Unit 5840 MHz MHz dBm dBm
-
Note 2M Mode Peak power at Antenna port The smaller, the better Table 2 5.8GHz RF Specification SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw Electrical Specification Typ 3.3 Min 3.0 Max 3.6 4. Item Power Supply Voltage Consumption Current
(TX_MODE) Consumption Current
(RX_MODE) Operating Temperature 0 55 Table 5 IA9QH5 SY5-A24 MODULE V0.1 page - 6 -
Note No GPIO driving , 0.1CH Mode No GPIO driving , 0.1CH Mode Unit V mA mA 132 91 25 Min 2.0
-0.3 2.4 Typ Max 3.33 0.8 0.4 Unit V V V V Conditions LDO_OUT=3V LDO_OUT=3V LDO_OUT=3V LDO_OUT=3V Table 6 Item Symbol VIH VIL VOH VOL Parameter Input High Threshold Input Low Threshold Output High Threshold Output Low Threshold SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9QH5 SY5-A24 MODULE V0.1 page - 7 -
5. Mechanical Specification 6.1 No Shielding Case Dimension35 * 35 * 1 mm PCB 4 Layers Mechanical Drawing Fig 6.1 Mechanical Drawing of SY5-A24 Module SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw Interface IA9QH5 SY5-A24 MODULE V0.1 page - 8 -
24 1 Fig 8.1 Pin sequence of SY5-A24 Module Name Pin 1 GPIO11 2 GPIO15 3 I2C_DATA_S 4 I2C_CLK_S 5 I2C_DATA_M 6 I2C_CLK_M 7 GPIO 31 8 GPIO 13 9 SPB_I2S_BCK 10 SPB_I2S_LRCK 11 SPB_I2S_MCLK 12 DGND 13 SPA_I2S_BCK 14 SPA_I2S_LRCK 15 SPA_I2S_DATA 16 SPB_I2S_DATA 17 GPIO 21 18 GPIO 34 19 GPIO 16 20 GPIO 17 21 GPIO 36 22 DGND 23 VCCIO 24 VCCIO Digital GND TX Function Define I/O I/O GPIO I/O GPIO I/O I2C Master/Slave data signal I/O I2C Master/Slave clock signal I/O GPIO I/O GPIO I/O GPIO I/O GPIO I/O SPB I2S audio BCK I/O SPB I2S audio LRCK I/O SPB I2S audio MCLK P I/O SPA I2S audio BCK I/O SPA I2S audio LRCK I/O I2S DATA 0 I/O SPB I2S audio Data I/O GPIO I/O GPIO I/O GPIO I/O GPIO I/O I2C_BUSYNeed 10K Pull High P P P Resistor Digital GND DC 3.0 ~ 3.6V IN DC 3.0 ~ 3.6V IN Table 8 IO Function Define RX Function Define GPIO GPIO GPIO GPIO I2C Master/Slave data signal I2C Master/Slave clock signal GPIO GPIO SPB I2S audio BCK SPB I2S audio LRCK SPB I2S audio MCLK Digital GND SPA I2S audio BCK SPA I2S audio LRCK SYNC LED SPB I2S audio Data GPIO GPIO GPIO AMP RESET(L Act) I2C_BUSYNeed 10K Pull High Resistor Digital GND DC 3.0 ~ 3.6V IN DC 3.0 ~ 3.6V IN SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9QH5 SY5-A24 MODULE V0.1 page - 9 -
SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw FCC Statement 15.19 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 15.21 Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the users authority to operate the equipment. 15.105(b) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTS The RF 5G Wireless Module complies with Part 15 of the United States of America FCC rules and regulations. The Orig inal Equipment Manufacturer (OEM) must comply with the FCC certification requirements. 15.21 Any changes or modifications made to the module without the manufacturers approval could void the users authority to operate the module. Instructions to the OEM/Integrator:
This module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC/ISED
(Innovation, Science and Economic Development Canada) certification if they meet the following conditions. Otherwise, Additional FCC/IC approvals must be obtained. The OEM must comply with the FCC labeling requirements. If the modules label is not visible when installed, then an additional permanent label must be applied on the outside of the finished product which states: Contains transmitter module FCC ID: PJH-IA9QH5SY5A24. Additionally, the following statement should be included on the label and in the final products user manual:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interferences, and (2) this device must accept any interference received, including interference that may cause undesired operation. The users manual for the host product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC / IC RF exposure guidelines. The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device. This Module is full modular approval, it is limited to OEM installation ONLY. The module is limited to installation in mobile application. A separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and difference antenna configurations. The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. The Grantee will provide guidance to the Host Manufacturer for compliance with the Part 15B requirements if requested. IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si brouillage est susceptible d'en compromettre le fonctionnement. le IC 20cm RF This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Cet quipement est conforme aux limites dexposition aux rayonnements de la IC tablies pour un environnement non contr. Cet quipement doit tre install et fonctionner au moins 20 cm de distance dun radiateur ou de votre corps.