DDaattaa SShheeeett
nameRF 5G Wireless Module Model Project CodeSMMDIM9QC58RH4 Version 0.2 Aug. 22, 2017 Syncomm Technology Corp. 10F., No. 101, Sec. 2, Gongdao 5th Rd., East Dist., Hsinchu City, Taiwan, R.O.C. Tel: +886-3-5169188 Fax: +886-3-5169111 http://www.syncomm.com.tw SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw INDEX 1. Features .................................................................................................................................................... 3 2. Application .............................................................................................................................................. 3 3. RF Specification ...................................................................................................................................... 4 4. Audio Specification ................................................................................................................................. 5 5. Electrical Specification ............................................................................................................................ 6 6. Mechanical Specification ........................................................................................................................ 7 7. Block Diagram ....................................................................................................................................... 11 8. Interface ................................................................................................................................................. 12 9. Design Reference ................................................................................................................................... 13 10. Antenna Application .............................................................................................................................. 15 11. Ordering Information ............................................................................................................................. 20 12. Revision History .................................................................................................................................... 20 This document is proprietary and confidential to Syncomm Technology Corp. SYNIC and Intelligent Wireless are trademarks of Syncomm Technology Corp. All other trademarks and registered trademarks are the property of their respective owners. SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 3 -
1. Features 5.2GHz/5.8GHz ISM Band
GFSK modulation
Low BOM cost
Long distance > 30m (Line of sight)
Support 1-1 duplex mode or 1-N broadcasting mode
RF frequency hopping in 58 channels
Digital I2S audio interface
Support no audio detection function
Audio format 24bit , 32/44.1/48KHz sampling rate
Robust Packet error correction
Low power consumption
No RF induced audio noise
Compatible with FCC/ CE regulations 2. Application
Wireless HTiB Rear Speaker
Wireless Outdoor Speaker
Wireless TV theater
Wireless Audio Sender
Wireless Headphone
Wireless Stereo Ear Microphone SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 4 -
3. RF Specification Item Channel Range
-20dB bandwidth RF Output Power Sensitivity Item Channel Range
-20dB bandwidth RF Output Power Sensitivity Min 5165 Min 5740 Typ 2.5 12
-90 Max Unit 5200 MHz MHz
-86 dBm dBm Note Peak power at Antenna port The smaller, the better Table 1 5.2GHz RF Specification Typ 2.5 11
-89 Max Unit 5840 MHz MHz
-86 dBm dBm Note Peak power at Antenna port The smaller, the better Table 2 5.8GHz RF Specification SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 5 -
4. Audio Specification H C 0
. 2 H C 1
. 0 Item SNR THD + N Frequency Response Dynamic range SNR THD + N Frequency Response Dynamic range 2.1 CH Typ Max Min 90 20 90 90 20 90 94
-80 94 94
-84 94
-75 20k
-80 5k Unit Note dBr @1kHz dB Hz dB
@1kHz, the smaller, the better
@1dBm
@1kHz dBr @1kHz dB Hz dB
@1kHz, the smaller, the better
@3dBm
@1kHz Note: Test condition is that using Card type EVB board with ADC: AK5357 at master mode and DAC: AK4386 at master mode. Table 3 ADC to DAC 2.1 CH Typ Max 140
-100 100 135
-100 100
-95 20k
-95 5k Item SNR THD + N Frequency response Dynamic range SNR THD + N Frequency response Dynamic range Min 135 20 95 130 20 95 Unit Note dBr @1kHz dB Hz dB
@1kHz, the smaller, the better
@1dBm
@1kHz dBr @1kHz dB Hz dB
@1kHz, the smaller, the better
@3dBm
@1kHz H C 0
. 2 H C 1
. 0 Note: Test condition is that using sample rate 48 kHz, NFsCLK factor 512 and resolution 24. Table 4 I2S to I2S SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 6 -
5. Electrical Specification Item Power Supply Voltage Min Typ 3.0 3.3 Consumption Current
(TX_MODE) Consumption Current
(RX_MODE) Operating Temperature 85 60 0 100 65 25 Max 3.6 115 75 55 Unit Note V mA mA 12dBm, continue mode, no GPIO driving Receiving only, no GPIO driving Item Symbol VIH VIL VOH VOL Parameter Input High Threshold Input Low Threshold Min 2.0
-0.3 Output High Threshold 2.4 Output Low Threshold
Power On Reset Characteristics Symbol Parameter VDD_CORE 1.8V POR input PORN VR18 VF18 TLH18 THL18 1.8V POR output Rising Detection Level Falling Detection Level Rising Delay Falling Delay Min 1.62 1.33 2 2 Table 5 Typ Table 6 Max 3.33 0.8 0.4 Unit V V V V Conditions LDO_OUT=3V LDO_OUT=3V LDO_OUT=3V LDO_OUT=3V Typ Max Unit 1.8 1.98 1.5 1.4 1.47 Table 7 Conditions V V V S VDD_CORE slew rate = 1V/S S VDD_CORE slew rate = 1V/S Fig 5.1 Power On Reset Timing Chart SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 7 -
6. Mechanical Specification 6.1 Without Shielding Case
Dimension20 * 40 * 6.7 mm
PCB 4 Layers Mechanical Drawing Fig 6.1 Mechanical Drawing of S83D-E Module
Propose 1.27mm Female Header sizeH:4.30.15mm W:3.00.15mm SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 8 -
6.2 With Shielding Case
Dimension20 * 40 * 8.7 mm
PCB 4 Layers Mechanical Drawing Fig 6.2 Mechanical Drawing of S83D-E Module with shielding case
Propose 1.27mm Female Header sizeH:4.30.15mm W:3.00.15mm SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 9 -
SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 10 -
SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 11 -
7. Block Diagram Fig 7.1 Block Diagram of IA9Q5 S83D-E Module SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 12 -
8. Interface Fig 8.1 Pin sequence of S83D-E Module (Bottom View) RX Function Define DC 3.0 ~ 3.6V IN Digital GND SPB I2S audio MCLK system clock output AMP MUTE GPIO GPIO GPIO Name Pin 1 VCCIO 2 DGND TX Function Define I/O P DC 3.0 ~ 3.6V IN P Digital GND 3 SPB_I2S_MCLK I/O SPB I2S audio MCLK system clock output 4 GPIO 32 5 GPIO 14 6 GPIO 31 7 GPIO 17 8 GPIO 36 I2C_CLK 9 10 I2C_DATA 11 DGND 12 DGND 13 GPIO 27 14 GPIO 21 15 GPIO 16 16 GPIO 34 17 M_RESET(PORN) 18 I2C_CLK 19 I2C_DATA 20 GPIO 30 21 SPA_I2S_DATA 22 SPB_I2S_LRCK 23 DGND 24 SPB_I2S_BCK 25 GPIO 15 26 SPB_I2S_DATA I/O GPIO I/O GPIO I/O GPIO I/O GPIO I/O I2C_BUSYModule Pull High I2C_BUSYModule Pull High I/O I2C Master/Slave clock signal I/O I2C Master/Slave data signal P Digital GND P Digital GND I/O GPIO I/O GPIO I/O GPIO I/O I2S Master/Slave Select I/O Internal power on reset (1) I/O I2C Master/Slave clock signal I/O I2C Master/Slave data signal I/O GPIO I/O I2S DATA 0 I/O SPB I2S audio LRCK P Digital GND I/O SPB I2S audio BCK I/O GPIO I/O SPB I2S audio Data I2C Master/Slave clock signal I2C Master/Slave data signal Digital GND Digital GND Pairing GPIO ON/OFF 12V I2S Master/Slave Select Internal power on reset (1) I2C Master/Slave clock signal I2C Master/Slave data signal AMP RESET(L Act) SYNC LED SPB I2S audio LRCK Digital GND SPB I2S audio BCK ON/OFF 3.3V SPB I2S audio Data Note : (1) *.Not need external RC circuit to do RC reset Table 8 IO Function Define
*.Power On Reset Characteristics can reference section 5 Electrical Specification (page 6)
*.External controller can direct control M_RESET but should assign the control IO as input for normal operation and output low to Reset S83D-E Module SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 13 -
9. Design Reference 9.1 ADC/DAC Reference Design Fig 9.1 ADC reference design circuit Fig 9.2 DAC reference design circuit SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 14 -
9.2 I2S Timing Chart LRCK BCK SDATA Fig 9.3 I2S timing chart Symbol Parameter tBLR to LRCK rising BCK edge LRCK edge to BCK rise SDATA setup time SDATA hold time tLRB tSDS tSDH Typ Max Min 60 60 60 60 Table 9 Unit ns ns ns ns SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 15 -
10. Antenna Application 10.1 Suggested Clear Area The recommended antenna clearance for embedded PCB antennas are shown below. Note that this clearance should be maintained when mounting the module on a motherboard. Unit : mm Do not place any copper, metal or even PCB in the area marked with cross lines. Fig 10.1 Antenna Clearance Recommendations from Top and Side View SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 16 -
10.2 Antenna Drawing 10.3 Antenna Pattern SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 17 -
SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 18 -
SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 19 -
Max Antenna Gain2.85 dBi SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw IA9Q5 S83D-E MODULE V3 page - 20 -
11. Ordering Information Note: Model Name is the abbreviation of Feature column which is written in bold. For example P is the abbreviation of PCB antenna Table 10 12. Revision History Date 2017/07/13 2017/08/15 Revision 0.1 0.2 Descriptions First release Add Mechanical picture Table 11 SYNCOMM Confidential E-Mail: sell@syncomm.com.tw Web site: Http://www.syncomm.com.tw The frequency block is 5725Mhz~5850MHz Operating Temperature:0~55C Output power: 13.5dBm The device is restricted to indoor use when operated in the European Community using frequency in 5725Mhz~5850MHz to reduce the potential for interference. Restriction in BE, BG, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL, PT, RO, SI, SK, FI, SE, UK. RF exposure statement RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Declaration of Conformity Hereby, SYNCOMM TECHNOLOGY CORP declares that the radio equipment type RF 5G Wireless Module is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.syncomm.com.tw/index.php/sc/2013-07-31-08-36-54-2 FCC Statement 15.19 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 15.21 Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the users authority to operate the equipment. 15.105(b) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTS The RF 5G Wireless Module complies with Part 15 of the United States of America FCC rules and regulations. The Orig inal Equipment Manufacturer (OEM) must comply with the FCC certification requirements. 15.21 Any changes or modifications made to the module without the manufacturers approval could void the users authority to operate the module. ORIGINALEQUIPMENTMANUFACTURER(OEM)NOTES TheOEMmustcertifythefinalendproducttocomplywithunintentionalradiators(FCCSections15.107and 15.109)beforedeclaringcomplianceofthefinalproducttoPart15oftheFCCrulesandregulations.Integration intodevicesthataredirectlyorindirectlyconnectedtoAClinesmustaddwithClassIIPermissiveChange. TheOEMmustcomplywiththeFCClabelingrequirements.Ifthemoduleslabelisnotvisiblewheninstalled, thenanadditionalpermanentlabelmustbeappliedontheoutsideofthefinishedproductwhichstates:
ContainstransmittermoduleFCCID:PJH-IA9Q5S83D-E.Additionally, thefollowingstatementshouldbeincludedonthelabelandinthefinalproductsusermanual:
ThisdevicecomplieswithPart15oftheFCCRules. Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterferences,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired operation. This Module is full modular approval, it is limited to OEM installation ONLY.