Wireless RF Keyboard The following illustration shows the Wireless RF Keyboard and hot keys Working Conditions:
1.Please install the complete driver so that the Hot key functions could be carried out. NOTE:
keys do not appear on screen, without driver installation. 1.Under system of Windows 2000/NT4.0/ME/XP, the Hot key functions could be carried out, though some of the 2.Windows 95/98 doesn't support Hot Key function before driver install successfully, Git mu 2-1. Turn off the computer. Connect the Receiver cable to the PC via PS/2 ports. Keyboard PS/2(purpie) _ mouse PS/2(green) ~~
S 2-2.Place Receiver away from ~~
electronic devices. kf ERE 3-1. Plug and Play(PnP):
This wirelss combination provides user-
friendly Plug and Play(PnP). You don't need to press any ID button. The pre-set factory ID default will establish the communication channel automatically. MODEL NO.:AKM-C35XX EX ttt~*
If the keyboard or mouse does not work as expected,make sure the following proc-
edures were completed as specified earlier in these instructions.
-New batteries are inserted correctly
-The receiver was properly connected to the computer. If the it is still not working, trying changing the channel. Changing the wireless connection channel is usefull if you are experiencing interference. NOTE:You should redefine the ID Select after you replace the battery according to the process "3-2" . Power Saving Mode:
| A. Suspend Mode: Keep mouse stationary for 10 minutes, mouse will be automatically put into Suspend Mode, and press left button to wake up mouse;
B. Power Off Mode: Press mouse ID for 3 seconds, then the optical LED will flash once showing Power off, and press ID again for waking up. 42 Function Button | Function Search :opens a search window in Netscape or Windows My Favorite: opens the IE favorites folder .or the Net-
scape bookmarks folder Backward: goes to the previous page in your Web browser Forward: goes to the next page in your Web browser Stop: stops loading a Web page Refresh reloads the Web |
page Volume Down: decreases audio volume Play/Pause:plays or pauses a CD/DVD/VCD
) | Volume UP: increases
| audio volume Stop: stops playing a |
CD/DVD/VCD Next Track: searches |
forward through tracks ona CD/DVD/VCD Mute: turns off the audio u E-mail: launches the default e-mail application Worid Wide Web: opens your default Web browser Calculator: opens the calculator window Power off: turns off the computer Suspend. enters the com-
puler into power saving mode _ Word: Opens the word window Previous Track: searches backward through tracks on a CD/DVD/VCD Excel: Opens the Excel window |
3-2.To change the wireless connection channel 1.Press the ID button on the bottom of the keyboard. 2.Press the button of the top of receiver. Mouse ID Setting STEP 4 Mouse 1D button Keyboard ID Setting STEP2 Receiver wreRG ID button Keyboard 1D button Warning !:The above steps shall be complete within 10 seconds .Otherwise, the ID connection might be failed and need to re-connected again. a.Check the receiver's cable connections. b.Place Receiver at least 8 inches away from electronic devices. c. You should redefine the ID Select after you replace the batteries according to the process "3-2"
a NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection This equipment generates |
uses and can radiated radia frequency energy ang, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no quarantee that interference
| will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equioment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuil different from that to which the receiver is connected
= Consull the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority tooperate the equipment.
| The antenna(S) used for this transmitter must not be co-located or
|_| operating in conjunction with any other antenna or transmitter
| The manufacturer is not responsible for any radia of TV Interference caused
|_| by unauthorized modifications to this equipment. Such modifications could
|_| void the user's authority to operate the equipment 0470 HOXAKM-C35 MA683070068