|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2018-02-26
|
|
1 2 3
|
Applicant's complete, legal business name |
Systems & Technology Corp.
|
|
1 2 3
|
FCC Registration Number (FRN) |
0009805086
|
|
1 2 3
|
Physical Address |
18-5F, No.79, Hsin Tai Wu Road, Sec. 1, Hsichih
|
|
1 2 3
|
New Taipei City, N/A
|
|
1 2 3
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
RLS
|
|
1 2 3
|
Equipment Product Code |
STAVL1713
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
M**** L******
|
|
1 2 3
|
Telephone Number |
886-2******** Extension:
|
|
1 2 3
|
Fax Number |
886-2********
|
|
1 2 3
|
E-mail |
m******@systech.com.tw
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/25/2018 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 | PCB - PCS Licensed Transmitter |
| 1 2 3 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Module integrating Intel Sofia-3R chipset solution with cellular (2G+3G), BT, Wifi and GNSS features |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 | Purpose / Application is for | Change in identification of presently authorized equipment. Original FCC ID: RI7HE9223GR Grant Date: 12/13/2016 |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | Ouput power is conducted. Single Modular Approval.
This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.
Multi-transmitter, supporting simultaneous transmission, between DTS transmitter and PCB transmitter with the same FCC ID: RLS-STAVL1713 has been evaluated in this filling. Other multi-transmitter,
supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system and § 2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. This device supports 20 and 40 MHz bandwidth modes. |
| 1 2 3 | Ouput power is conducted. Single Modular Approval.
This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.
Multi-transmitter, supporting simultaneous transmission, between PCB transmitter and DSS/DTS transmitter with the same FCC ID: RLS-STAVL1713 has been evaluated in this filling. Other multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system and § 2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.
The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 4.37 dBi for 850MHz bands and 2.11 dBi for 1900MHz bands. |
| 1 2 3 | Ouput power is conducted. Single Modular Approval.
This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.
Multi-transmitter, supporting simultaneous transmission, between DSS transmitter and PCB transmitter with the same FCC ID: RLS-STABL1713 has been evaluated in this filling. Other multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and §15.31(k) composite system and § 2.1 end product terms and concepts. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
DEKRA Testing and Certification, S.A.U.
|
|
1 2 3
|
Name |
F******** C******
|
|
1 2 3
|
Telephone Number |
34-95********
|
|
1 2 3
|
Fax Number |
34-95********
|
|
1 2 3
|
E-mail |
f******@dekra.com
|
|