FCC ID: 2ANDR-BTC0121 DJI Remote Control Pad

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name SZ DJI Osmo Technology Co.,Ltd. Address 4F, Jingkou Community Comprehensive Service Building, No. 83 Bishui Road North, Guangming Street, Guangming District, Shenzhen Grantee Code 2ANDR FCC ID 2ANDR-BTC0121 Authorized Contact Name Fajia Wang Contact Email certification@dji.com Contact Phone 26656677 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of myknowledge and belief.b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made inthis application, the Applicant is responsible for:(1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensurethat production units of this equipment will continue to comply with the FCCs technical requirements.d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsibleparty and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321.e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, acceptsand agrees to abide by the post market surveillance requirements.(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See47CFR 1.2002(b) for the definition of a party for these purposes.g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions.Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date:2021.7.26 Print Name: Fajia Wang Title: Certification supervisor *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SZ DJI Osmo Technology Co.,Ltd. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2ANDR-BTC0121 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Fajia Wang Title: Certification supervisor Signature: On behalf of Company: SZ DJI Osmo Technology Co.,Ltd. Telephone: 26656677 E-mail: certification@dji.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5487470.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR210802082502 Page: 1 of 8 FCC ID: 2ANDR-BTC0121 RF EXPOSURE EVALUATION REPORT Application No.:

Applicant:

Address of Applicant:

Manufacturer:

Address of Manufacturer:

GZCR2108020825AT SZ DJI Osmo Technology Co., Ltd. 4F, Jingkou Community Comprehensive Service Building, No. 83 Bishui Road North, Guangming Street, Guangming District, Shenzhen SZ DJI Osmo Technology Co., Ltd. 4F, Jingkou Community Comprehensive Service Building, No. 83 Bishui Road North, Guangming Street, Guangming District, Shenzhen Equipment Under Test (EUT):

EUT Name:

Model No.:

Trade Mark:

Standard(s) :

DJI Remote Control Pad BTC01 DJI 47 CFR PART 1, Subpart I, Section 1.1310 47 CFR PART 2, Subpart J, Section 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt:

2021-08-19 Date of Evaluation:

2021-08-22 to 2021-08-25 Date of Issue:

Evaluation Result:

2021-08-26 Pass*

* In the configuration evaluated, the EUT complied with the standards specified above. Kobe Jian EMC Laboratory Manager SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR210802082502 Page: 2 of 8 Revision Record Version Chapter Date Modifier Remark 01 2021-08-26 Original Authorized for issue by:

Tested By Reviewed By Kevin Zhang/Project Engineer Ricky Liu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR210802082502 Page: 3 of 8 2 Evaluation Summary Note:

E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR210802082502 Page: 4 of 8 EMC-TRF-03 Rev 1.0 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 3 4 Evaluation Summary .......................................................................................................................... 3 Contents ............................................................................................................................................. 4 General Information............................................................................................................................ 5 4.1 4.2 4.3 4.4 4.5 Details of E.U.T. .......................................................................................................................... 5 Evaluating Location ...................................................................................................................... 5 Facility ......................................................................................................................................... 6 Deviation from Standards ............................................................................................................. 6 Abnormalities from Standard Conditions ....................................................................................... 6 5 Technical Requirements Specification .............................................................................................. 7 5.1 RF Exposure Evaluation ............................................................................................................... 7 5.1.1 Limit & Test Method ................................................................................................................. 7 5.1.2 Conclusion ............................................................................................................................... 7 6 EUT Constructional Details (EUT Photos) ......................................................................................... 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR210802082502 Page: 5 of 8 DC 3.7V Lithium-ion 65mAh rechargeable battery (to be charged from Type C port) 2402MHz to 2480MHz 4 General Information 4.1 Details of E.U.T. Power supply:

Operation Frequency:

Bluetooth Version:

Modulation Type:

Number of Channels:

Data Rate:

Channel Spacing:

Antenna Type:

Antenna Gain:

V5.0 LE GFSK 40 1Mbps, 2Mbps 2MHz Dipole Antenna 3dBi 4.2 Evaluating Location All tests were performed at:

SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 No tests were sub-contracted. Fax: +86 20 82075059 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR210802082502 Page: 6 of 8 EMC-TRF-03 Rev 1.0 4.3 Facility The facility is recognized, certified, or accredited by the following organizations:

NVLAP (Lab Code: 200611-0) SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. CNAS (Lab Code: L0167) SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been assessed and in compliance with CNAS-CL01:2018 accreditation criteria for testing laboratories (identical to ISO/IEC 17025:2017 General Requirements) for the Competence of Testing Laboratories. FCC Recognized Accredited Test Firm(Registration No.: 486818) SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been accredited and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Designation Number: CN5016, Test Firm Registration Number: 486818. ISED (Registration No.: 4620B, CAB identifier: CN0052) SGS-CSTC Standards Technical Services Co., Ltd., has been registered by Innovation Science and Economic Development Canada for Wireless Device Testing laboratories to test to Canadian radio equipment requirements. Registration No. 4620B, CAB identifier: CN0052. VCCI (Registration No.: R-12460, C-12584, G-20107 and T-11179) The 10m Semi-anechoic chamber, 966 Anechoic Chamber and Shielded Room of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-12460, C-12584, G-20107 and T-11179 respectively. CBTL (Lab Code: TL129) SGS-CSTC Standards Technical Services Co., Ltd., E&E Laboratory has been assessed and fully comply with the requirements of ISO/IEC 17025:2017, the Basic Rules, IECEE 01 and Rules of procedure IECEE 02, and the relevant IECEE CB-Scheme Operational documents. 4.4 Deviation from Standards None 4.5 Abnormalities from Standard Conditions None SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR210802082502 Page: 7 of 8 5 Technical Requirements Specification 5.1 RF Exposure Evaluation 5.1.1 Limit & Test Method The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances 50 mm are determined by:

[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]

[f(GHz)] 3.0 for 1-g SAR and 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation17 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is

< 5 mm, a distance of 5 mm is applied to determine SAR test exclusion 5.1.2 Conclusion dBm on the lowest channel 2.402 GHz The Max Conducted Peak Output Power is 2.5 2.5 dBm logarithmic terms convert to numeric result is nearly 1.78 mW According to the formula. calculate the test exclusion thresholds:

[(max. power of channel, including tune-up tolerance, mW)/

(min. test separation distance, mm)] [f(GHz)]

General RF Exposure = (1.78 mW / 5 mm) x 2.402 GHz = 0.55 SAR requirement:

S = 3.0

(1) < (2) So the SAR report is not required.

(1)

(2) Note: Refer to report No. GZCR210802082501 for EUT test Max Conducted Peak Output Power value. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR210802082502 Page: 8 of 8 6 EUT Constructional Details (EUT Photos) Refer to external and internal photos for GZCR2108020825AT

- End of the Report -

SZ DJI Osmo Technology Co.,Ltd. Authority letter FCC Date: 8/31/2021 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ANDR-BTC0121 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SZ DJI Osmo Technology Co.,Ltd.. This authorization is valid until further written notice from the applicant. Title: Certification supervisor Print Name: Fajia Wang Signature: On behalf of Company: SZ DJI Osmo Technology Co.,Ltd. Telephone: 26656677 E-mail: certification@dji.com