FCC ID: 2ANDR-P102006 DJI RSC 2

DJI RSC 2 DJI RSC 2 1. Tilt Motor 2. Tilt Lock 3. Screen 4. Side Wheel 5. Camera Control Button 6. Joystick 7. M Button 8. Extended Grip/Tripod 9. Back Button 10. M4/NATO 11. Lock Knob 12. Lower Quick-Release Plate 13. Upper Quick-Release Plate 14. Image Transmission/Focus Motor Port (USB-C) 15. Focus Motor Port (USB-C) 16. RSS Camera Control Port (USB-C) 17. Front Dial 18. Trigger 19. Power Button 20. Power Port (USB-C) 21. Pan Lock 22. Pan Motor 23. Roll Lock 24. Roll Motor Getting Started A. Downloading the DJI RONINTM App and Watching the Tutorials B. Charging the Battery and Checking the Battery Level Before using for the first time, charge the DJI RSC 2 through the power port using a charging cable (included) and a USB adapter (not included). It is recommended to use a USB adapter with QC 2.0 and PD protocol (max. 24 W). Check the battery level through the screen. C. Attaching the Extended Grip/Tripod D. Unfold and unlock the gimbal E Powering On/Off and Entering/Exiting Sleep Mode Press and hold the power button to turn DJI RSC 2 on or off. Tap or press twice to enter or exit sleep mode. FActivating DJI RSC 2 DJI RSC 2 needs to be activated through the Ronin app before using for the first time. 1. Press and hold the power button to power on the gimbal. 2. Enable Bluetooth on your mobile device and launch the Ronin app. Note that a DJI account is required to launch the Ronin app. Once detected in the list of Bluetooth devices, select DJI RSC 2 and input the default Bluetooth password: 12345678. Make sure you are connected to the internet and follow the on-screen instructions to activate DJI RSC 2. Mounting the Camera Make sure to prepare the camera before mounting it to DJI RSC 2. Remove the lens cap and check that the battery and memory card are inserted in the camera. Make sure DJI RSC 2 is powered off or in sleep mode before mounting the camera. 1. Attach the Upper Quick-Release Plate The camera lens and the arrow on the bottom of the upper quick-release plate must face the same direction. Attach the upper quick-release plate to the camera by tightening the screw. 2. Attach the Lower Quick-Release Plate and Lens-Fastening Strap 3. Attach the Camera to the Gimbal To remove the lower quick-release plate, toggle the lever on the camera mounting plate to the unlocked position and remove the lower quick-release plate while pressing the safety lock on the mounting plate. 4. Connect the Camera Control Cable. Choose the proper camera control cable according to the camera type. Plug one end of the cable into the RSS camera control port of the gimbal and plug the other end into the camera. Balancing Balancing is required before shooting. Before balancing, make sure to power on the camera if using an optical zoom lens and to select the focal length if using a varifocal lens. Make sure DJI RSC 2 is powered off or in sleep mode before balancing. 1. Balancing the Vertical Tilt a. Unlock the tilt axis and loosen the mounting plate knob. b. Rotate the tilt axis so that the camera lens is pointing upward. Check to make sure the camera is not top or bottom-heavy. If top-heavy, move the camera backward. If bottom-heavy, move the camera forward. c. Tighten the mounting plate knob while holding the camera upward. The vertical tilt is balanced when the camera is steady while pointing upward. 2. Balancing Depth for the Tilt Axis a. Rotate the tilt axis so that the camera lens is pointing forward. Toggle the lever to the unlocked position. b. Check to make sure the camera is not front or back-heavy. If front-heavy, move the camera backward by turning the knob. If back-heavy, move the camera forward. c. Toggle the lever to the locked position. The tilt axis is balanced when the camera is steady while tilted up or down by 45. d. Lock the tilt axis. 3. Balancing the Roll Axis a. Unlock the roll axis. Loosen the knob on the roll arm. b. Check the direction in which the roll motor swings. If the camera rotates to the left, move the camera to the right. If the camera rotates to the right, move the camera to the left. c. Tighten the knob. The roll axis is balanced when the camera is steady. d. Lock the roll axis. 4. Balancing the Pan Axis a. Unlock the pan axis. Loosen the knob. b. While holding the grip, tilt DJI RSC 2 forward, and rotate the pan arm until parallel with you. c. Check the movement of the pan axis. If the camera lens rotates to the left, push the pan axis to the right. If the camera lens rotates to the right, push the pan axis to the left. d. Tighten the knob. The pan axis is balanced when the camera is steady when rotating the pan while tilting the grip. Operation After balancing, make sure the three axes are unlocked before powering on DJI RSC 2. Screen Operation Turn the side wheel to scroll the menu and press to confirm option. Press the back button to go back to the previous menu. Button Functions Power Button Press and hold to power on or off. Tap or press twice to enter or exit sleep mode. Trigger Tap once to start ActiveTrack (requires the Image Transmission System to be enabled). Press and hold to enter Lock mode. Tap twice to re-center the gimbal. Tap three times to turn the gimbal 180 so that the camera faces you (selfie mode). Camera Control Button*

Press halfway for autofocus. Press once to start or stop recording. Press and hold to take a photo. M Button Tap to select a user profile. Press and hold to enter Sport mode. Press and hold and press the trigger twice to remain in Sport mode. Repeat to exit Sport mode. Quickly tap twice to enter portrait mode. Press three times to enter or exit 3D Roll 360. When in 3D Roll 360, move the joystick left or right twice to automatically rotate the camera. Tap the trigger twice to stop continuous auto rotation. Press and hold the M button together with the trigger to begin auto tune. Front Dial*

Turn to control focus (default setting). Joystick Push up or down to control the movement of the tilt axis (default setting). Push left or right to control the movement of the pan axis (default setting).

*The functions of the camera control button and front dial vary according to the camera and require the camera control cable to be connected. Refer to the DJI RSC 2 Camera Compatibility List on www.dji.com/rsc-2 for more information. Ronin App Use the Ronin app to access more functions such as Force Mobile, virtual joystick, and gimbal and camera settings. Specification Weight Model Dimensions Input Power USB Input Gimbal: Approx. 1196 gexcl. quick-release plate and NATO adapter Extended Grip/TripodmetalApprox.226 g Extended Grip/TripodplasticApprox.226 g Quick-Release PlateApprox.102 g P10 Gimbal (folded): 260 210 75 mm Gimbal (unfolded)400 185 175 mm (incl. grip, excl. Extended Grip/Tripod ModelRB2-3400mAh-7.2V Type18650 2S Capacity3400 mAh Energy24.48 Wh 5V/2A, 9V/2A, 12V/2A, 15V/1.6A

-20 to 45 C (-4 to 113 F) 14 hours hourswhen using a 18 2 W charger Bluetooth Operating Frequency 2.40 GHz -2.4835 GHz Operating Temperature Max Standby Time Charging Time FCC Compliance Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ISED Compliance Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :(1)Lappareil ne doit pas produire de brouillage; (2)Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The portable device is designed to meet the requirements for exposure to radio waves established by the ISED.

(Pb)

(Hg)

(Cd)

(Cr+6)

(PBB)

(PBDE) SJ/T 11364 GB/T 26572 GB/T 26572 ROHS KCC Compliance Notice

. NCC Compliance Notice DJI RSC 2P10 nit Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavale nt chromium

(Cr+6) Polybromin ated biphenyls

(PBB) Polybromina ted diphenyl ethers

(PBDE) 1. 0.1 wt % 0.01 wt %

2. 3. EU Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Declaracin de cumplimiento UE: SZ DJI Osmo Technology Co., Ltd. por la presente declara que este dispositivo cumple los requisitos bsicos y el resto de provisiones relevantes de la Directiva 2014/53/EU. Hay disponible online una copia de la Declaracin de conformidad UE en www.dji.com/euro-

compliance Direccin de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany EU-verklaring van overeenstemming: SZ DJI Osmo Technology Co., Ltd. verklaart hierbij dat dit apparaat voldoet aan de essentile vereisten en andere relevante bepalingen van Richtlijn 2014/53/EU. De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Declarao de conformidade da UE: A SZ DJI Osmo Technology Co., Ltd. declara, atravs deste documento, que este dispositivo est em conformidade com os requisitos essenciais e outras disposies relevantes da Diretiva 2014/53/EU. Existe uma cpia da Declarao de conformidade da UE disponvel online em www.dji.com/euro-

compliance Endereo de contacto na UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dichiarazione di conformit UE: SZ DJI Osmo Technology Co., Ltd. dichiara che il presente dispositivo conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva 2014/53/EU. Una copia della dichiarazione di conformit UE disponibile online all'indirizzo Web www.dji.com/euro-compliance Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dclaration de conformit UE : Par la prsente, SZ DJI Osmo Technology Co., Ltd. dclare que cet appareil est conforme aux principales exigences et autres clauses pertinentes de la directive europenne 2014/53/EU. Une copie de la dclaration de conformit UE est disponible sur le site www.dji.com/euro-

compliance Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany EU-Compliance: Hiermit erklrt SZ DJI Osmo Technology Co., Ltd., dass dieses Gert den wesentlichen Anforderungen und anderen einschlgigen Bestimmungen der EU-Richtlinie 2014/53/EU entspricht. Eine Kopie der EU-Konformittserklrung finden Sie online auf www.dji.com/euro-compliance Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

: SZ DJI Osmo Technology Co., Ltd. , 2014/53/. www.dji.com/euro-compliance

: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Prohlen o shod pro EU: Spolenost SZ DJI Osmo Technology Co., Ltd. tmto prohlauje, e tohle zazen vyhovuje zkladnm poadavkm a dalm pslunm ustanovenm smrnice 2014/53/EU. Kopie prohlen o shod pro EU je k dispozici on-line na webu www.dji.com/euro-compliance Kontaktn adresa v EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nmecko EU-overensstemmelseserkl ring: SZ DJI Osmo Technology Co., Ltd. erkl rer hermed, at denne enhed er i overensstemmelse med de v sentlige krav og andre relevante bestemmelser i direktiv 2014/53/EU. Der er en kopi af EU-overensstemmelseserkl ringen tilg ngelig online p www.dji.com/euro-

compliance EU-kontaktadresse: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland

: SZ DJI Osmo Technology Co., Ltd. 2014/53/E. www.dji.com/euro-compliance

: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, ELi vastavuskinnitus Kesolevaga teatab SZ DJI Osmo Technology Co., Ltd., et see seade on koosklas direktiivi 2014/53/EL oluliste nuete ja muude asjakohaste stetega. ELi vastavusdeklaratsiooni koopia on kttesaadav veebis aadressil www.dji.com/euro-compliance Kontaktaadress ELis: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Saksamaa Praneimas dl atitikties ES reikalavimams Bendrov SZ DJI Osmo Technology Co., Ltd. tvirtina, kad is prietaisas atitinka pagrindinius 2014/53/ES direktyvos reikalavimus ir kitas susijusias nuostatas. ES atitikties deklaracijos kopij galite rasti adresu www.dji.com/euro-compliance ES kontaktinis adresas: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany (Vokietija) ES atbilstbas paziojums: SZ DJI Osmo Technology Co., Ltd ar o apliecina, ka ierce atbilst direktvas 2014/53/ES pamatprasbm un prjiem btiskiem nosacjumiem. ES atbilstbas deklarcijas kopija pieejama tiesaist vietn www.dji.com/euro-compliance ES kontaktadrese: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Vcija EU:n vaatimustenmukaisuusvakuutus: SZ DJI Osmo Technology Co., Ltd. ilmoittaa tten, ett tm saatavana verkossa osoitteessa vaatimustenmukaisuusvakuutuksesta on laite on direktiivin 2014/53/EU olennaisten vaatimusten ja sen muiden asiaankuuluvien ehtojen mukainen. Kopio EU:n www.dji.com/euro-compliance Yhteystiedot EU:ssa: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany RITEAS Comhlonta an AE: Dearbhaonn SZ DJI Osmo Technology Co., Ltd. leis seo go bhfuil an glas seo de rir na gceanglas riachtanach agus na bhforlacha bhartha eile sa Treoir 2014/53/AE. T coip de Dhearbh Comhrireachta an AE ar fil ar lne ag www.dji.com/euro-compliance Seoladh teagmhla san AE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany Dikjarazzjoni ta Konformit tal-UE: SZ DJI Osmo Technology Co., Ltd. hawnhekk tiddikjara li dan l-

apparat huwa konformi mar-rekwiiti essenzjali u ma dispoizzjonijiet relevanti ora tad-Direttiva 2014/53/UE. Kopja tad-Dikjarazzjoni ta Konformit tal-UE hija disponibbli onlajn fis-sit www.dji.com/euro-

compliance Indirizz ta kuntatt tal-UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, il-ermanja Declaraia UE de conformitate: Prin prezenta, SZ DJI Osmo Technology Co., Ltd. declar faptul c acest dispozitiv este conform cu cerinele eseniale i celelalte prevederi relevante ale Directivei 2014/53/UE. Un exemplar al Declaraiei UE de conformitate este disponibil online, la adresa www.dji.com/euro-

compliance Adresa de contact pentru UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germania Izjava EU o skladnosti: Druba SZ DJI Osmo Technology Co., Ltd. izjavlja, da ta naprava ustreza osnovnim zahtevam in drugim ustreznim dolobam Direktive 2014/53/EU. Kopija izjave EU o skladnosti je na voljo na spletu na www.dji.com/euro-compliance Kontaktni naslov EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemija EU Izjava o sukladnosti: Tvrtka SZ DJI Osmo Technology Co. Ltd. izjavljuje da je ovaj ureaj izraen u skladu s osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/53/EU. Kopija EU Izjave o sukladnosti dostupna je na mrenoj stranici www.dji.com/euro-compliance Adresa EU kontakta: DJI GmbH, Industriestrasse 12 97618, Niederlauer, Njemaka Vyhlsenie o zhode E : SZ DJI Osmo Technology Co., Ltd. tmto vyhlasuje, e toto zariadenie je v zhode so zkladnmi poiadavkami a almi relevantnmi ustanoveniami smernice 2014/53/E. Kpia tohto Vyhlsenia o zhode E je k dispozcii online na www.dji.com/euro-compliance Kontaktn adresa v E : DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nemecko Deklaracja zgodnoci UE: Firma SZ DJI Osmo Technology Co., Ltd. niniejszym owiadcza, e przedmiotowe urzdzenie innymi stosownymi postanowieniami dyrektywy 2014/53/UE. Kopi deklaracji zgodnoci UE mona znale w Internecie na stronie www.dji.com/euro-

jest zgodne z zasadniczymi wymogami i compliance Adres do kontaktu w UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Niemcy EU megfelelsgi nyilatkozat: A DJI Osmo Technology Co., Ltd. ezton megersti, hogy ez az eszkz megfelel a 2014/53/EU Irnyelv alapvet kvetelmnyeinek s ms vonatkoz rendelkezseinek. Az EU megfelelsgi nyilatkozat msolata elrhet a www.dji.com/euro-compliance oldalon EU kapcsolati cm: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Nmetorszg EU-frskran om efterlevnad: SZ DJI Osmo Technology Co., Ltd. hrmed frklarar att denna enhet uppfyller de vsentliga kraven och andra relevanta bestmmelser i direktivet 2014/53/EU. En kopia av EU-frskran om efterlevnad finns att tillg online p adressen www.dji.com/euro-

compliance Kontaktadress EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Tyskland Yfirlsing um fylgni vi reglur ESB: SZ DJI Osmo Technology Co., Ltd. lsir hr me yfir a etta t ki hlti mikilv gum krfum og rum vieigandi kv um tilskipunar 2014/53/ESB. Nlgast m eintak af ESB-samr misyfirlsingunni netinu www.dji.com/euro-compliance Heimilisfang ESB-tengiliar: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany AB Uygunluk Beyan: SZ DJI Osmo Technology Co., Ltd. bu belge ile bu cihazn temel gerekliliklere ve 2014/53/EU sayl Direktifin dier ilgili hkmlerine uygun olduunu beyan eder. AB Uygunluk Beyannn bir kopyasna www.dji.com/euro-compliance adresinden evrim ii olarak ulalabilir AB iin iletiim adresi: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Almanya Environmentally friendly disposal Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances. Umweltfreundliche Entsorgung Elektro-Altgerte drfen nicht mit gewhnlichem Abfall entsorgt werden und mssen separat entsorgt werden. Die Entsorgung an kommunalen Sammelstellen ist fr Privatpersonen kostenlos. Die Eigentmer der Altgerte sind fr den Transport zu den Sammelstellen verantwortlich. Durch diesen geringen Aufwand knnen Sie zur Wiederverwertung von wertvollen Rohmaterialien beitragen und dafr sorgen, dass umweltschdliche und giftige Substanzen ordnungsgem unschdlich gemacht werden. Tratamiento de residuos responsable con el medio ambiente Los aparatos elctricos viejos no pueden desecharse junto con los residuos orgnicos, sino que deben ser desechados por separado. Existen puntos limpios donde los ciudadanos pueden dejar estos aparatos gratis. El propietario de los aparatos viejos es responsable de llevarlos a estos puntos limpios o similares puntos de recogida. Con este pequeo esfuerzo ests contribuyendo a reciclar valiosas materias primas y al tratamiento de residuos txicos. Mise au rebut cologique Les appareils lectriques usags ne doivent pas tre limins avec les dchets rsiduels. Ils doivent tre limins sparment. La mise au rebut au point de collecte municipal par l'intermdiaire de particuliers est gratuite. Il incombe au propritaire des appareils usags de les apporter ces points de collecte ou des points de collecte similaires. Avec ce petit effort personnel, vous contribuez au recyclage de matires premires prcieuses et au traitement des substances toxiques. Smaltimento ecologico I vecchi dispositivi elettrici non devono essere smaltiti insieme ai rifiuti residui, ma devono essere smaltiti separatamente. Lo smaltimento da parte di soggetti privati presso i punti di raccolta pubblici gratis. responsabilit del proprietario dei vecchi dispositivi portarli presso tali punti di raccolta o punti di raccolta analoghi. Grazie a questo piccolo impegno personale contribuirete al riciclo di materie prime preziose e al corretto trattamento di sostanze tossiche. Milieuvriendelijk afvoeren Oude elektrische apparaten mogen niet worden weggegooid samen met het restafval, maar moeten afzonderlijk worden afgevoerd. Afvoeren via het gemeentelijke inzamelpunt is gratis voor particulieren. De eigenaar van oude toestellen is verantwoordelijk voor het inleveren van de apparaten op deze of vergelijkbare inzamelpunten. Met deze kleine persoonlijke inspanning lever je een bijdrage aan de recycling van waardevolle grondstoffen en de verwerking van giftige stoffen. Eliminao ecolgica Os aparelhos eltricos antigos no podem ser eliminados juntamente com os materiais residuais. Tm de ser eliminados separadamente. A eliminao no ponto de recolha pblico atravs de entidades particulares gratuita. da responsabilidade do proprietrio de aparelhos antigos lev-los a estes pontos de recolha ou a pontos de recolha semelhantes. Com este pequeno esforo pessoal, contribui para a reciclagem de matrias-primas teis e para o tratamento de substncias txicas.

. Ekologicky etrn likvidace Star elektrick zazen nesmj bt likvidovna spolu se zbytkovm odpadem, ale mus bt likvidovna samostatn. Likvidace na komunlnch sbrnch mstech prostednictvm soukromch osob je bezplatn. Vlastnk starch zazen odpovd za to, e je donese do tchto sbrnch mst nebo na obdobn sbrn msta. Tmto mete pispt k recyklaci hodnotnch surovin a zpracovn toxickch ltek. Miljvenlig bortskaffelse Gamle elektriske apparater m ikke bortskaffes sammen med restaffald, men skal bortskaffes separat. Bortskaffelse p et f lles indsamlingssted er gratis for privatpersoner. Ejere af gamle apparater er ansvarlige for at bringe apparater hen til disse indsamlingssteder eller til lignende indsamlingssteder. Med denne lille personlige indsats bidrager du til genanvendelse af v rdifulde rvarer og behandlingen af giftige stoffer.

. Keskkonnasstlik kasutuselt krvaldamine Vanu elektriseadmeid ei tohi ra visata koos olmejtmetega, vaid tuleb koguda ja kasutuselt krvaldada eraldi. Kohaliku omavalitsuse elektroonikaromude kogumispunktis on raandmine eraisikutele tasuta. Vanade seadmete sellistesse vi sarnastesse kogumispunktidesse toimetamise eest vastutavad seadmete omanikud. Selle vikese isikliku panusega aitate kaasa vrtusliku toorme ringlussevtule ja mrgiste ainete ttlemisele. Utilizavimas nekenkiant aplinkai Sen elektrini prietais negalima imesti kartu su buitinmis atliekomis; juos btina utilizuoti atskirai. Toki prietais utilizavimas per komunalinius atliek surinkimo punktus yra nemokamas. Elektrini prietais savininkai utilizuojamus prietaisus privalo priduoti atitinkamus arba analogikus atliek surinkimo punktus. Tokiu bdu, ddami nedaug pastang, prisidsite prie verting mediag perdirbimo ir aplinkos apsaugojimo nuo toksini mediag. Videi draudzga atkritumu likvidana Vecas elektrisks ierces nedrkst likvidt kop ar prjiem atkritumiem, bet ts jlikvid atsevii. Privtpersonm atkritumu likvidana komunlaj savkanas punkt ir bez maksas. Veco ieru panieks ir atbildgs par ieru nogdanu ajos savkanas punktos vai ldzgos savkanas punktos. Ar m nelielm personiskajm plm js veicint vrtgu izejmaterilu prstrdi un toksisko vielu apstrdi. Hvittminen ympristystvllisesti Vanhoja shklaitteita ei saa hvitt kaatopaikkajtteen mukana, vaan ne on hvitettv erikseen. Kunnalliseen keryspisteeseen vieminen on yksityishenkillle ilmaista. Vanhojen laitteiden omistaja vastaa laitteiden toimittamisesta kyseisiin keryspisteisiin tai vastaaviin. Tll vhisell henkilkohtaisella vaivalla edistt omalta osaltasi arvokkaiden raaka-aineiden kierrtyst ja myrkyllisten aineiden ksittely. Discairt neamhdhobhlach don chomhshaol Nor cheart seanghlasanna leictreacha a dhiscairt leis an dramhal iarmharach, ach caithfear iad a chur de limh astu fin. T an discairt ag an ionad bailichin pobail ag daoine probhideacha saor in aisce. T freagracht ar inir seanghlasanna na glasanna a thabhairt chuig na hionaid bhailichin sin n chuig ionaid bhailichin den chinel canna. Le hiarracht bheag phearsanta mar sin, cuidonn t le hamhbhair luachmhara a athchrsil agus le substaint tocsaineacha a chireil Rimi li jirrispetta l-ambjent L-apparat elettriku qadim ma gandux jintrema flimkien ma skart residwu, ida gandu jintrema bmod separat. Ir-rimi fil-post tal-bir komunali minn persuni privati huwa bxejn. Is-sit ta apparat qadim huwa responsabbli biex iib l-apparat fdawn il-postijiet tal-bir jew fpostijiet tal-

bir simili. Bdan l-isforz personali gir, inti tikkontribwixxi gar-riikla ta materja prima prezzjua u gat-trattament ta sustanzi tossii. Eliminarea ecologic Aparatele electrice vechi nu trebuie aruncate odat cu deeurile reziduale, ci trebuie eliminate separat. Eliminarea n cadrul punctului de colectare local de ctre persoane fizice este gratuit. Proprietarii de aparate vechi sunt responsabili pentru transportul acestora la respectivele puncte de colectare sau la alte puncte de colectare similare. Prin acest efort personal nesemnificativ, putei contribui la reciclarea materiilor prime valoroase i la tratarea substanelor toxice. Okolju prijazno odlaganje Starih elektrinih aparatov ne smete odvrei skupaj z ostanki odpadkov, temve loeno. Odlaganje na komunalnem zbirnem mestu je za fizine osebe brezplano. Lastnik starih naprav je odgovoren, da jih pripelje do teh ali podobnih zbirnih mest. S tako malo osebnega truda prispevate k recikliranju dragocenih surovin in obdelavi strupenih snovi. Ekoloko odlaganje Stari elektrini ureaji ne smiju se odlagati zajedno s kunim otpadom, ve ih treba odlagati odvojeno. Odlaganje na komunalnom sabirnom mjestu od strane privatnih osoba je besplatno. Vlasnik starih ureaja duan je donijeti ureaje do tih sabirnih mjesta ili slinih sabirnih mjesta. Ovim malim osobnim naporom doprinosite recikliranju vrijednih sirovina i pravilnoj obradi otrovnih tvari. Ekologick likvidcia Star elektrospotrebie sa nesm likvidova spolu so zvykovm odpadom, ale musia sa zlikvidova samostatne. Likvidcia v komunlnom zbernom mieste prostrednctvom skromnch osb je bezplatn. Majite starch spotrebiov je zodpovedn za prinesenie spotrebiov na tieto zbern miesta alebo na podobn zbern miesta. Tmto malm osobnm silm prispievate k recyklovaniu cennch surovn a spracovaniu toxickch ltok Utylizacja przyjazna dla rodowiska Nie mona usuwa starych urzdze elektrycznych wraz z pozostaymi odpadami. Wymagaj one oddzielnej utylizacji. Utylizacja przez osoby prywatne w punkcie zbirki odpadw komunalnych jest darmowa. Waciciel starych urzdze jest odpowiedzialny za dostarczenie ich do takich lub podobnych punktw zbirki. Zadajc sobie tak niewielki trud, przyczyniasz si do recyklingu cennych surowcw i odpowiedniego postpowania z substancjami toksycznymi. Krnyezetbart hulladkkezels A rgi elektromos kszlkeket nem szabad a nem szelektven gyjttt hulladkkal egytt kidobni, hanem a hulladkkezelsket elklntve kell vgezni A kzssgi gyjtpontokon a magnszemlyek ingyenesen leadhatjk ezeket. A rgi kszlkek tulajdonosai felelnek azrt, hogy e kszlkeket ezekre a gyjtpontokra, vagy ms gyjtpontokra elhozzk. Ezzel a kis szemlyes erfesztssel n is hozzjrul az rtkes nyersanyagok jrahasznostshoz s a mrgez anyagok kezelshez. Miljvnlig hantering av avfall Gamla elektriska apparater fr inte kasseras tillsammans med restavfallet utan mste kasseras separat. Kassering p den lokala insamlingsplatsen fr privatpersoner r gratis. garen av gamla apparater ansvarar fr att ta apparaterna till dessa insamlingsplatser eller till liknande insamlingsplatser. Med denna lilla personliga insats bidrar du till tervinning av vrdefulla rvaror och hantering av giftiga mnen. Umhverfisv n frgun Ekki m farga gmlum raft kjum me rgangsleifum, heldur arf a farga eim srstaklega. Frgun almennum sfnunarstum er keypis fyrir einstaklinga. Eigandi gamalla t kja ber byrg a koma me t kin essa sfnunarstai ea svipaa sfnunarstai. Me essu litla persnulega taki stular a endurvinnslu verm tra hrefna og mefer eitrurefna. evre dostu bertaraf Eski elektrikli cihazlar, dier atklarla birlikte bertaraf edilmemeli, ayrca atlmaldr. zel kiiler araclyla genel toplama noktasna bertaraf ilemi cretsiz olarak yaplmaktadr. Eski cihazlarn sahibi, cihazlar bu toplama noktalarna veya benzer toplama noktalarna getirmekten sorumludur. Bu az miktardaki kiisel abayla, deerli ham maddelerin geri dntrlmesine ve toksik maddelerin ileme alnmasna katkda bulunmu olursunuz. Thailand Warning message

. Mexico Warning message La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Brazil Warning message Informaes sobre Regulamentao. Este equipamento est certificado e homologado pela ANATEL. Para maiores informaes, consulte o site da ANATEL: www.anatel.gov.br. Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados.

SZ DJI Osmo Technology Co.,Ltd. To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding:

Confidentiality Request regarding application for FCC ID: 2ANDR-P102006 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM List The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Signature:

Print Name: fajia wang Title:PM On behalf of Company: SZ DJI Osmo Technology Co.,Ltd. Telephone: 26656677 E-mail: Certification@dji.com

SZ DJI Osmo Technology Co.,Ltd. Date: 2020-08-19 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ANDR-P102006 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SZ DJI Osmo Technology Co.,Ltd. This authorization is valid until further written notice from the applicant. Print Name: fajia wang Signature:

Title:PM On behalf of Company: SZ DJI Osmo Technology Co.,Ltd. Telephone: 26656677 E-mail: Certification@dji.com

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name SZ DJI Osmo Technology Co.,Ltd. 2F, Building 3, Binhai Mingzhu Industrial Park No. 291 Louming Road, Xinhu Street, Guangming District, Shenzhen,China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name fajia wang 2ANDR 2ANDR-P102006 Certification@dji.com 26656677 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: 2020.08.19 Print Name:

Title:

fajia wang PM

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0